Resources

An unknown pure elemental substance XX is analyzed in a materials laboratory. Physical measurements reveal the following properties: a density of 2.26 g/cm32.26\text{ g/cm}^3, sublimation temperature exceeding 3900 K3900\text{ K}, anisotropic thermal conductivity (k∥≈1500 W/(m⋅K)k_\parallel \approx 1500\text{ W}/(\text{m}\cdot\text{K}) within planes versus k⊥≈5 W/(m⋅K)k_\perp \approx 5\text{ W}/(\text{m}\cdot\text{K}) perpendicular to planes), excellent dry-lubricant mechanical cleavage under shear, and an interlayer basal spacing of d=3.35 A˚d = 3.35\text{ \AA} held together by weak dispersion interactions. Deduce the identity of substance XX, specify its network dimensionality (1D1\text{D}, 2D2\text{D}, or 3D3\text{D}), and explain how the coexistence of two distinct bonding regimes within its lattice produces its mechanical lubricity.

Answer and steps

Final answer

Substance XX is graphite (an allotrope of carbon). Its covalent network dimensionality is 2D2\text{D} (two-dimensional sheets). Its lubricity arises from its layered structure: while carbon atoms within each planar sheet are rigidly held by strong covalent sp2\text{sp}^2 σ\sigma bonds, the adjacent parallel sheets are separated by 3.35 A˚3.35\text{ \AA} and held together only by weak London dispersion forces, allowing the atomically smooth sheets to readily slide past one another under mechanical shear stress.

Steps

01

Identify Substance XX from Elemental and Physical Data

The substance is an elemental allotrope characterized by:

  • An exceptionally high sublimation temperature (>3900 K> 3900\text{ K}), indicative of extremely strong covalent bonding within the element's framework.
  • A macroscopic density of ρ=2.26 g/cm3\rho = 2.26\text{ g/cm}^3.
  • An interlayer basal spacing of d=3.35 A˚d = 3.35\text{ \AA} (0.335 nm0.335\text{ nm}).
  • Highly anisotropic thermal conductivity and utility as a dry lubricant.

These parameters uniquely identify substance XX as graphite, an allotrope of carbon (C\ce{C}).


02

Determine Network Dimensionality

Graphite consists of carbon atoms arranged in flat, parallel hexagonal rings:

  • Each carbon atom forms three strong localized coplanar σ\sigma bonds with neighboring carbons via sp2\text{sp}^2 hybridization, alongside a delocalized π\pi system.
  • Because these continuous covalent networks extend infinitely in two dimensions across a single plane, the covalent network dimensionality of graphite is 2D2\text{D} (two-dimensional layered sheets, individually known as graphene).

Common Pitfall: Do not classify graphite as a 3D3\text{D} covalent network solid. While diamond is a 3D3\text{D} network solid (where every carbon is tetrahedrally bonded to four neighbors), graphite's covalent network terminates at the boundary of each planar sheet.


03

Explain Lubricity via Dual Bonding Regimes

Graphite exhibits two contrasting bonding regimes within its bulk crystal:

  1. Intralayer Bonding (Within Sheets): Within each sheet, carbon-carbon bonds are covalent with a short bond length (≈1.42 A˚\approx 1.42\text{ \AA}) and high bond energy (≈524 kJ/mol\approx 524\text{ kJ/mol}). This imparts enormous mechanical rigidity, chemical stability, and high thermal conductivity (k∥≈1500 W/(m⋅K)k_\parallel \approx 1500\text{ W}/(\text{m}\cdot\text{K})) along the planes.
  2. Interlayer Bonding (Between Sheets): Adjacent sheets are separated by a much larger distance of d=3.35 A˚d = 3.35\text{ \AA} and are held together only by weak London dispersion forces (induced dipole-induced dipole interactions) and π–π\pi\text{–}\pi stacking interactions.

Because the energy barrier to shear displacement parallel to the planes is very low compared to the energy required to break in-plane covalent bonds, applying a lateral shear stress causes the atomically smooth sheets to slide freely over one another without destroying the individual layers. This low resistance to shear slippage produces graphite's characteristic dry mechanical lubricity and easy cleavage.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student confuses graphite with diamond due to the extremely high sublimation temperature of elemental carbon, leading to an incorrect 3D network classification.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Substance XX is carbon (diamond).

    Correct

    Substance XX is graphite (carbon).

    You correctly recognized that the high sublimation temperature corresponds to elemental carbon, but the density (2.26 g/cm32.26\text{ g/cm}^3, well below diamond's 3.51 g/cm33.51\text{ g/cm}^3), dry-lubricant properties, basal spacing of 3.35 A˚3.35\text{ \AA}, and anisotropic thermal conductivity uniquely define graphite.

  2. Step 2

    3D\text{3D} network

    Correct

    2D\text{2D} covalent network (layered sheets)

    Because you identified the substance as diamond, you assigned it a 3D\text{3D} network. Graphite forms covalent bonds within flat planar sheets, so its covalent network dimensionality is 2D\text{2D}.

  3. Step 3

    Carbon atoms form strong sp3\text{sp}^3 covalent bonds in three dimensions, making the crystal rigid and resistant to deformation.

    Correct

    Within each planar sheet, carbon atoms are held by strong covalent sp2\text{sp}^2 σ\sigma bonds, whereas adjacent parallel sheets are separated by 3.35 A˚3.35\text{ \AA} and held together only by weak London dispersion forces, allowing the smooth sheets to slide easily past each other under mechanical shear stress.

    Your explanation describes diamond's isotropic rigidity, which directly conflicts with the prompt's mention of dry lubricity and easy shear cleavage. Graphite has two distinct regimes: strong in-plane covalent bonding and weak interlayer dispersion interactions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced that the ultra-high sublimation temperature (>3900 K> 3900\text{ K}) points to elemental carbon.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Allotrope Misidentification & Dimensionality Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the extremely high sublimation temperature solely with diamond's rigid three-dimensional tetrahedral lattice, overlooking that graphite shares an ultra-high sublimation point while exhibiting anisotropic physical properties, low density, and layered cleavage due to weak interlayer dispersion forces.

REASONING PATH
Your ACEpath teacher’s suggested approach
Density and Basal Spacing
  • Diamond has a dense 3D\text{3D} packing (ρ≈3.51 g/cm3\rho \approx 3.51\text{ g/cm}^3), whereas graphite has a lower density (ρ≈2.26 g/cm3\rho \approx 2.26\text{ g/cm}^3) and an open interlayer spacing (d=3.35 A˚d = 3.35\text{ \AA}).

  • Always cross-check physical constants like density and basal spacing before finalizing an allotrope identification.

Covalent Dimensionality vs. Lubricity
  • A 3D\text{3D} covalent network resists shear and deformation, whereas a 2D\text{2D} layered network with weak interlayer forces enables easy sliding under lateral shear.

  • Match mechanical observations like dry lubricity to weak van der Waals interactions between independent 2D\text{2D} sheets.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Graphite's covalent bonding extends continuously in only two dimensions within each flat hexagonal plane, giving it a 2D\text{2D} covalent network dimensionality.

  2. Within each sheet, carbon atoms form strong localized sp2\text{sp}^2 σ\sigma bonds (1.42 A˚1.42\text{ \AA}) that account for the high sublimation temperature and high in-plane thermal conductivity (k∥k_\parallel).

  3. Adjacent sheets are separated by 3.35 A˚3.35\text{ \AA} and held together only by weak London dispersion forces, enabling the sheets to slide over one another under shear stress to provide dry lubricity.

Final answer

Substance XX is graphite (carbon). Its covalent network dimensionality is 2D\text{2D}. Lubricity is produced because rigid planar sheets held by strong in-plane covalent sp2\text{sp}^2 bonds can slide over each other along the basal planes due to weak interlayer London dispersion forces.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how physical anisotropy (directional differences in conductivity and cleavage) signals layered 2D\text{2D} structures rather than isotropic 3D\text{3D} networks.

  • Practice contrasting the bonding, hybridization, and macroscopic properties of diamond, graphite, and fullerenes.

OverviewACEpath Teacher's Diagnosis

02 A student misclassifies the bulk graphite crystal as a 3D network solid because it extends in three spatial dimensions macroscopically.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Substance XX is carbon (graphite)

  2. Step 2

    3D3\text{D} network

    Correct

    2D2\text{D} network

    Covalent network dimensionality refers strictly to the continuous directions of covalent bonds, not macroscopic bulk shape. In graphite, continuous covalent bonds extend only within planar sheets (2D2\text{D}), while the third dimension is held solely by non-covalent dispersion forces.

  3. Step 3

    Within planes, carbon atoms are covalently bonded in rigid hexagonal rings, while adjacent layers are held together by weak van der Waals dispersion forces.   ⟹  \implies Shear forces readily overcome the weak dispersion forces between layers, allowing the 2D2\text{D} sheets to slide past one another and provide lubricity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified substance XX as graphite based on its physical and crystallographic properties.

You clearly described the coexistence of strong in-plane covalent bonding and weak interlayer dispersion forces.

You correctly linked the weak interlayer forces to easy shear slippage and dry lubricity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Macroscopic Crystal Extent with Covalent Network Dimensionality

You likely thought of the entire macroscopic solid occupying three-dimensional space rather than the specific dimensionality spanned by continuous covalent bonds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Network dimensionality (1D1\text{D}, 2D2\text{D}, or 3D3\text{D}) counts only the spatial dimensions along which infinite, uninterrupted covalent bonds propagate. In graphite, covalent bonds terminate at the boundary of each monolayer sheet (a 2D2\text{D} network); the macroscopic 3D3\text{D} crystal is assembled merely by stacking these 2D2\text{D} networks via non-covalent London dispersion forces.

REASONING PATH
Your ACEpath teacher’s suggested approach
Covalent vs. Intermolecular Extent
  • To determine covalent network dimensionality, trace only the paths of continuous covalent bonds; ignore intermolecular or van der Waals interactions.

  • If covalent bonds extend only across flat sheets separated by dispersion forces, classify the network as 2D2\text{D}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Trace the covalent bonding in graphite: each carbon forms strong covalent σ\sigma and π\pi bonds with three neighbors within a single plane.

  2. Observe that perpendicular to the planes, no covalent bonds exist; adjacent sheets are held solely by weak dispersion forces.

  3. Conclude that because continuous covalent bonding propagates in only two orthogonal directions, the covalent network dimensionality is 2D2\text{D}.

Final answer

Substance XX is graphite (carbon), its covalent network dimensionality is 2D2\text{D}, and its lubricity arises because strong in-plane covalent bonds preserve sheet integrity while weak interlayer dispersion forces easily shear and slide.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice classifying network solids (such as diamond, graphite, hexagonal boron nitride, and quartz) by tracing where covalent bonds terminate versus where they continue.

  • Remember the distinction: diamond is a 3D3\text{D} covalent network solid, whereas graphite is a layered 2D2\text{D} covalent network solid.

OverviewACEpath Teacher's Diagnosis

03 A student misattributes the interlayer bonding in graphite to metallic bonding rather than dispersion forces, mistakenly concluding that mobile electrons provide lubrication.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Substance XX is carbon (graphite) ⟹\Longrightarrow 2D network

  2. Step 2

    Strong covalent bonds form the planar hexagonal sheets, but the layers are held together by metallic bonding from delocalized pi electrons.

    Correct

    Strong sp2\text{sp}^2 covalent bonds form the planar hexagonal sheets, while adjacent parallel sheets are held together by weak London dispersion forces.

    While carbon possesses delocalized π\pi electrons that provide electrical conductivity along each sheet, adjacent sheets are held together by weak London dispersion forces, not metallic bonding.

  3. Step 3

    The metallic sea of electrons between layers acts as a fluid ball-bearing layer, allowing sheets to slip smoothly.

    Correct

    Because the interlayer dispersion interactions are very weak compared to the strong in-plane sp2\text{sp}^2 σ\sigma bonds, a small mechanical shear stress easily overcomes the interlayer attraction, allowing the atomically smooth sheets to slide past one another.

    Because step 2 misidentified the interlayer interaction as metallic bonding, your explanation attributed lubricity to an electron sea rather than the low shear resistance between dispersion-bonded layers.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced that substance XX is graphite based on its high sublimation point, basal spacing, and density.

You correctly identified graphite as a 2D2\text{D} covalent network solid.

You recognized that strong covalent bonding holds the carbon atoms within the hexagonal sheets.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misattribution of Intermolecular Forces to Metallic Bonding

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing in-plane electrical conductivity from delocalized π\pi electrons with bulk metallic bonding, leading to the mistaken belief that an electron sea binds the layers together.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interlayer Interactions in Layered Networks
  • In 2D2\text{D} layered covalent solids like graphite, atoms within layers are covalently bonded, but separate neutral layers interact solely through weak intermolecular dispersion forces.

  • Check the chemical identity and layer separation: carbon is a nonmetal forming neutral sheets separated by 3.35 A˚3.35\text{ \AA}, so the attraction between sheets consists of London dispersion forces.

Mechanism of Solid Lubricity
  • Solid lubricity in layered materials occurs because weak intermolecular forces between sheets require very little shear force to overcome, enabling layers to slide freely without breaking covalent bonds.

  • Attribute low shear resistance to the breaking of weak dispersion forces between parallel sheets, not to mobile electrons acting as physical ball bearings.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify intralayer bonding: each carbon atom forms three coplanar sp2\text{sp}^2 σ\sigma bonds and a delocalized π\pi system, yielding continuous, highly rigid 2D2\text{D} hexagonal sheets.

  2. Identify interlayer bonding: adjacent neutral sheets are separated by d=3.35 A˚d = 3.35\text{ \AA} and held together only by weak London dispersion forces.

  3. Relate bonding to lubricity: because London dispersion forces are much weaker than in-plane covalent bonds, minimal shear stress is required to cause parallel sheets to slide across one another, producing mechanical lubricity.

Final answer

Substance XX is graphite with a 2D2\text{D} network structure. Lubricity arises because strong covalent bonds keep each sheet intact, while weak London dispersion forces between sheets permit easy sliding under shear stress.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the differences between metallic bonding (cations in a delocalized electron sea) and delocalized π\pi systems in nonmetal network solids.

  • Practice distinguishing intralayer covalent bonds from interlayer dispersion forces in other 2D2\text{D} materials like hexagonal boron nitride (h-BN\ce{h-BN}) and molybdenum disulfide (MoSX2\ce{MoS2}).

Lock it in

Similar question

01

Boron nitride (BN\text{BN}) exists in two common crystalline forms: cubic (c-BN\text{c-BN}) and hexagonal (h-BN\text{h-BN}). Given that h-BN\text{h-BN} is known as 'white graphite' and acts as a dry lubricant, state its covalent network dimensionality and identify the primary forces holding adjacent layers together.

Answer

h-BN\text{h-BN} has a 2D\text{2D} covalent network dimensionality. Adjacent layers are held together by weak London dispersion interactions (intermolecular van der Waals forces).

02

Molybdenum disulfide (MoSX2\ce{MoS2}) easily shears along parallel planes, giving it industrial utility as a solid lubricant comparable to graphite. Contrast the bonding within each S−Mo−S\ce{S-Mo-S} layer with the bonding between adjacent layers.

Answer

Intralayer: strong covalent/polar-covalent Mo−S\ce{Mo-S} bonds form rigid two-dimensional sheets. Interlayer: adjacent sulfur sheets face each other and interact only via weak London dispersion forces, allowing layers to slide past each other easily under shear.

03

A crystal of elemental black phosphorus has a layered structure with an interlayer distance of 5.3 A˚5.3\text{ \AA}, whereas white phosphorus consists of isolated PX4\ce{P4} tetrahedral molecules. Compare the expected melting/sublimation behavior and covalent network dimensionalities of these two allotropes.

Answer

Black phosphorus is a 2D\text{2D} covalent network solid with a high sublimation point because vaporizing it requires cleaving in-plane P−P\text{P}-\text{P} covalent bonds. White phosphorus is a 0D\text{0D} molecular solid consisting of discrete PX4\ce{P4} units that melts at a very low temperature (44.1∘C44.1^\circ\text{C}) by overcoming only weak intermolecular dispersion forces.

Loading workspace…