Resources

An aqueous solution is prepared by mixing 40.0 mL40.0\text{ mL} of 0.150 M CaCl2(aq)0.150\text{ M }\text{CaCl}_2(aq) with 60.0 mL60.0\text{ mL} of 0.100 M Na2CO3(aq)0.100\text{ M }\text{Na}_2\text{CO}_3(aq), forming insoluble calcium carbonate according to the net ionic equation Ca2+(aq)+CO32−(aq)→CaCO3(s)\text{Ca}^{2+}(aq) + \text{CO}_3^{2-}(aq) \rightarrow \text{CaCO}_3(s). Rather than determining the mass of precipitate, calculate the final equilibrium molar concentration of the excess unreacted ion, [Ca2+][\text{Ca}^{2+}], remaining in solution after precipitation goes to completion (neglect the slight solubility of CaCO3\text{CaCO}_3).

Answer and steps

Final answer

[Ca2+]=0.00 M[\text{Ca}^{2+}] = 0.00\text{ M} (stoichiometric equivalence, exactly 0 mmol0\text{ mmol} excess; or [Ca2+]=0.000 M[\text{Ca}^{2+}] = 0.000\text{ M} unreacted before considering KspK_{sp}).

Steps

01

Calculate the initial amount of each reacting ion

Both compounds are strong electrolytes and dissociate completely in aqueous solution:

  • CaClX2(aq)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(aq) -> Ca^{2+}(aq) + 2Cl^-(aq)}
  • NaX2COX3(aq)→2 NaX+(aq)+COX3X2−(aq)\ce{Na2CO3(aq) -> 2Na+(aq) + CO3^{2-}(aq)}

Calculate the initial millimoles (mmol\text{mmol}) of CaX2+\ce{Ca^{2+}} and COX3X2−\ce{CO3^{2-}} using the relationship amount=volume×molarity\text{amount} = \text{volume} \times \text{molarity}:

Initial moles of CaX2+=40.0 mL⋅0.150 mmol/mL=6.00 mmol\text{Initial moles of } \ce{Ca^{2+}} = 40.0\text{ mL} \cdot 0.150\text{ mmol/mL} = 6.00\text{ mmol}

Initial moles of COX3X2−=60.0 mL⋅0.100 mmol/mL=6.00 mmol\text{Initial moles of } \ce{CO3^{2-}} = 60.0\text{ mL} \cdot 0.100\text{ mmol/mL} = 6.00\text{ mmol}


02

Compare reactant quantities using stoichiometry

The net ionic equation for the precipitation reaction is:

CaX2+(aq)+COX3X2−(aq)→CaCOX3(s)\ce{Ca^{2+}(aq) + CO3^{2-}(aq) -> CaCO3(s)}

The stoichiometric mole ratio between CaX2+\ce{Ca^{2+}} and COX3X2−\ce{CO3^{2-}} is 1:11:1.

Comparing the available quantities:

  • Available CaX2+=6.00 mmol\ce{Ca^{2+}} = 6.00\text{ mmol}
  • Available COX3X2−=6.00 mmol\ce{CO3^{2-}} = 6.00\text{ mmol}

Because the amounts are identical, the reactants are mixed in exact stoichiometric equivalence. Neither reactant is in excess.

Common Pitfall: Do not assume a reactant is in excess based solely on a higher volume or higher molarity. You must calculate and compare the total moles of the reacting ions according to their stoichiometric coefficients.


03

Determine the remaining concentration of CaX2+\ce{Ca^{2+}}

Assuming the precipitation reaction goes completely to completion and neglecting the slight solubility (KspK_{\text{sp}}) of CaCOX3\ce{CaCO3}:

Remaining moles of CaX2+=6.00 mmol−6.00 mmol=0.00 mmol\text{Remaining moles of } \ce{Ca^{2+}} = 6.00\text{ mmol} - 6.00\text{ mmol} = 0.00\text{ mmol}

Even after accounting for the combined total volume:

Vtotal=40.0 mL+60.0 mL=100.0 mLV_{\text{total}} = 40.0\text{ mL} + 60.0\text{ mL} = 100.0\text{ mL}

The remaining molar concentration is:

[CaX2+]=0.00 mmol100.0 mL=0.00 M[\ce{Ca^{2+}}] = \frac{0.00\text{ mmol}}{100.0\text{ mL}} = 0.00\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student might mistakenly identify Ca²⁺ as the excess reactant by comparing only initial concentrations rather than total moles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mol Ca2+=0.0400 L×0.150 M=0.00600 mol  ⟹  mol CO32−=0.0600 L×0.100 M=0.00600 mol\text{mol Ca}^{2+} = 0.0400\text{ L} \times 0.150\text{ M} = 0.00600\text{ mol} \implies \text{mol CO}_3^{2-} = 0.0600\text{ L} \times 0.100\text{ M} = 0.00600\text{ mol}

  2. Step 2

    Since 0.150 M>0.100 M, Ca2+ is in excess.\text{Since } 0.150\text{ M} > 0.100\text{ M}, \text{ Ca}^{2+} \text{ is in excess.}

    Correct

    Since n(CaX2+)=0.00600 moln(\ce{Ca^{2+}}) = 0.00600\text{ mol} and n(COX3X2−)=0.00600 moln(\ce{CO3^{2-}}) = 0.00600\text{ mol}, the ions are in exact stoichiometric equivalence (1:11:1 ratio), so neither is in excess.

    You compared initial concentrations instead of the actual moles present. Because solution volumes differ, higher concentration does not necessarily mean greater quantity. Since the mole amounts are identical and react in a 1:11:1 ratio, there is no excess reactant.

  3. Step 3

    Excess mol Ca2+=0.00600 mol−0.00400 mol=0.00200 mol  ⟹  Total volume=100.0 mL=0.100 L  ⟹  [Ca2+]=0.00200 mol0.100 L=0.0200 M\text{Excess mol Ca}^{2+} = 0.00600\text{ mol} - 0.00400\text{ mol} = 0.00200\text{ mol} \implies \text{Total volume} = 100.0\text{ mL} = 0.100\text{ L} \implies [\text{Ca}^{2+}] = \frac{0.00200\text{ mol}}{0.100\text{ L}} = 0.0200\text{ M}

    Correct

    Excess n(CaX2+)=0.00600 mol−0.00600 mol=0.00 mol  ⟹  [CaX2+]=0.00 mol0.100 L=0.00 M\text{Excess } n(\ce{Ca^{2+}}) = 0.00600\text{ mol} - 0.00600\text{ mol} = 0.00\text{ mol} \implies [\ce{Ca^{2+}}] = \frac{0.00\text{ mol}}{0.100\text{ L}} = 0.00\text{ M}

    You correctly added the volumes to find the total volume of 0.100 L0.100\text{ L}, but your subtraction and final concentration were thrown off by misidentifying CaX2+\ce{Ca^{2+}} as an excess reactant.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of each reactant using n=M×Vn = M \times V.

You correctly determined the total solution volume by adding the volumes of the mixed solutions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Limiting Reactant Identified by Concentration Rather Than Moles

You compared the initial molarities (0.150 M>0.100 M0.150\text{ M} > 0.100\text{ M}) instead of looking at the equal mole quantities (0.00600 mol0.00600\text{ mol}) you had just calculated.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating molar concentration (an intensive property) with total amount of substance in moles (an extensive property) when determining limiting and excess reactants in solution stoichiometry.

REASONING PATH
Your ACEpath teacher’s suggested approach
Comparing Quantities for Stoichiometry
  • Chemical equations relate amounts in moles, never concentrations or volumes directly.

  • Always compare n=M×Vn = M \times V divided by stoichiometric coefficients to determine limiting and excess reactants.

Stoichiometric Equivalence
  • When the mole ratio of available reactants matches their balanced stoichiometric coefficients, all reactants are consumed simultaneously.

  • Check whether nAa=nBb\frac{n_A}{a} = \frac{n_B}{b} before searching for an excess reactant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the available moles of CaX2+\ce{Ca^{2+}} (0.00600 mol0.00600\text{ mol}) and COX3X2−\ce{CO3^{2-}} (0.00600 mol0.00600\text{ mol}) using the 1:11:1 stoichiometric ratio.

  2. Recognize that both reactants are completely consumed: remaining n(CaX2+)=6.00 mmol−6.00 mmol=0.00 mmol\text{remaining } n(\ce{Ca^{2+}}) = 6.00\text{ mmol} - 6.00\text{ mmol} = 0.00\text{ mmol}.

  3. Calculate the remaining concentration in the mixture: [CaX2+]=0.00 mmol100.0 mL=0.00 M[\ce{Ca^{2+}}] = \frac{0.00\text{ mmol}}{100.0\text{ mL}} = 0.00\text{ M}.

Final answer

[CaX2+]=0.00 M[\ce{Ca^{2+}}] = 0.00\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Compare stoichiometric mole ratios rather than initial molarities when identifying limiting reactants.

  • Practice identifying stoichiometric equivalence points where neither reactant remains in excess.

OverviewACEpath Teacher's Diagnosis

02 A student might calculate the molarity of Ca²⁺ by dividing the initial moles of Ca²⁺ by the new total volume, mistakenly ignoring the precipitation reaction entirely.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mol CaX2+=0.0400 L×0.150 M=0.00600 mol\text{mol }\ce{Ca^{2+}} = 0.0400\text{ L} \times 0.150\text{ M} = 0.00600\text{ mol}

  2. Step 2

    Total volume=40.0 mL+60.0 mL=0.100 L\text{Total volume} = 40.0\text{ mL} + 60.0\text{ mL} = 0.100\text{ L}

  3. Step 3

    [CaX2+]=0.00600 mol0.100 L=0.0600 M[\ce{Ca^{2+}}] = \frac{0.00600\text{ mol}}{0.100\text{ L}} = 0.0600\text{ M}

    Correct

    n(COX3X2−)=0.0600 L×0.100 M=0.00600 mol  ⟹  nremaining(CaX2+)=0.00600 mol−0.00600 mol=0.00 mol  ⟹  [CaX2+]=0.00 mol0.100 L=0.00 Mn(\ce{CO3^{2-}}) = 0.0600\text{ L} \times 0.100\text{ M} = 0.00600\text{ mol} \implies n_{\text{remaining}}(\ce{Ca^{2+}}) = 0.00600\text{ mol} - 0.00600\text{ mol} = 0.00\text{ mol} \implies [\ce{Ca^{2+}}] = \frac{0.00\text{ mol}}{0.100\text{ L}} = 0.00\text{ M}

    You divided initial moles by total volume without accounting for the chemical reaction. Because CaX2+\ce{Ca^{2+}} reacts in a 1:11:1 ratio with COX3X2−\ce{CO3^{2-}}, all 0.00600 mol0.00600\text{ mol} of CaX2+\ce{Ca^{2+}} reacts to form solid CaCOX3\ce{CaCO3}, leaving zero unreacted calcium ions in solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial moles of CaX2+\ce{Ca^{2+}} from the given molarity and volume.

You correctly calculated the final total volume of the combined solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignored chemical reaction stoichiometry

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the mixing of two reactive electrolyte solutions as a physical dilution rather than a precipitation reaction. When two solutions form an insoluble precipitate, you must compare the moles of both reacting species using an ICF (Initial-Change-Final) table or stoichiometry to find how much unreacted excess remains before calculating the final concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for reacting species
  • When mixing two solutions containing ions that can form an insoluble precipitate, determine the moles of both the cation and the anion.

  • Always find the moles of every reacting ion, not just the ion asked about in the final question.

Subtract consumed reactant before calculating concentration
  • Molarity after reaction equals remaining moles divided by total volume: [ion]=ninitial−nconsumedVtotal[\text{ion}] = \frac{n_{\text{initial}} - n_{\text{consumed}}}{V_{\text{total}}}.

  • Set up a mole table to find the limiting reactant and compute the remaining excess moles before dividing by VtotalV_{\text{total}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate initial moles of COX3X2−\ce{CO3^{2-}}: n(COX3X2−)=0.0600 L×0.100 M=0.00600 moln(\ce{CO3^{2-}}) = 0.0600\text{ L} \times 0.100\text{ M} = 0.00600\text{ mol}.

  2. Apply the reaction stoichiometry CaX2++COX3X2−→CaCOX3(s)\ce{Ca^{2+} + CO3^{2-} -> CaCO3(s)}: 0.00600 mol0.00600\text{ mol} of CaX2+\ce{Ca^{2+}} reacts with 0.00600 mol0.00600\text{ mol} of COX3X2−\ce{CO3^{2-}}.

  3. Calculate remaining unreacted CaX2+\ce{Ca^{2+}}: nremaining=0.00600 mol−0.00600 mol=0.00 moln_{\text{remaining}} = 0.00600\text{ mol} - 0.00600\text{ mol} = 0.00\text{ mol}.

  4. Divide remaining moles by total volume: [CaX2+]=0.00 mol0.100 L=0.00 M[\ce{Ca^{2+}}] = \frac{0.00\text{ mol}}{0.100\text{ L}} = 0.00\text{ M}.

Final answer

[CaX2+]=0.00 M[\ce{Ca^{2+}}] = 0.00\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using an ICF (Initial-Change-Final) table in moles whenever solutions are mixed and a net ionic reaction occurs.

  • Distinguish between spectator ions (which only undergo dilution) and precipitate-forming ions (which are consumed by reaction).

Lock it in

Similar question

01

A solution is prepared by mixing 25.0 mL25.0\text{ mL} of 0.200 M Ba(NOX3)X2(aq)0.200\text{ M }\ce{Ba(NO3)2}(aq) with 75.0 mL75.0\text{ mL} of 0.100 M NaX2SOX4(aq)0.100\text{ M }\ce{Na2SO4}(aq). Insoluble BaSOX4\ce{BaSO4} precipitates according to BaX2+(aq)+SOX4X2−(aq)→BaSOX4(s)\ce{Ba^{2+}(aq) + SO4^{2-}(aq) -> BaSO4(s)}. Assuming complete precipitation, calculate the final equilibrium concentration of the excess unreacted ion.

Answer

[SOX4X2−]=0.0250 M[\ce{SO4^{2-}}] = 0.0250\text{ M}. Key steps: n(BaX2+)=25.0 mL×0.200 M=5.00 mmoln(\ce{Ba^{2+}}) = 25.0\text{ mL} \times 0.200\text{ M} = 5.00\text{ mmol}; n(SOX4X2−)=75.0 mL×0.100 M=7.50 mmoln(\ce{SO4^{2-}}) = 75.0\text{ mL} \times 0.100\text{ M} = 7.50\text{ mmol}. Excess SOX4X2−=7.50−5.00=2.50 mmol\ce{SO4^{2-}} = 7.50 - 5.00 = 2.50\text{ mmol}. Total volume =25.0+75.0=100.0 mL= 25.0 + 75.0 = 100.0\text{ mL}. Final [SOX4X2−]=2.50 mmol100.0 mL=0.0250 M[\ce{SO4^{2-}}] = \frac{2.50\text{ mmol}}{100.0\text{ mL}} = 0.0250\text{ M}.

02

A student mixes 50.0 mL50.0\text{ mL} of 0.120 M Pb(NOX3)X2(aq)0.120\text{ M }\ce{Pb(NO3)2}(aq) with 50.0 mL50.0\text{ mL} of 0.200 M KI(aq)0.200\text{ M }\ce{KI}(aq), forming yellow precipitate PbIX2(s)\ce{PbI2}(s) via PbX2+(aq)+2 IX−(aq)→PbIX2(s)\ce{Pb^{2+}(aq) + 2I^-(aq) -> PbI2(s)}. Calculate the concentration of the excess ion remaining in solution after precipitation goes to completion.

Answer

[PbX2+]=0.0100 M[\ce{Pb^{2+}}] = 0.0100\text{ M}. Key steps: n(PbX2+)=50.0 mL×0.120 M=6.00 mmoln(\ce{Pb^{2+}}) = 50.0\text{ mL} \times 0.120\text{ M} = 6.00\text{ mmol}; n(IX−)=50.0 mL×0.200 M=10.0 mmoln(\ce{I-}) = 50.0\text{ mL} \times 0.200\text{ M} = 10.0\text{ mmol}. By stoichiometry, 10.0 mmol IX−10.0\text{ mmol }\ce{I-} consumes 5.00 mmol PbX2+5.00\text{ mmol }\ce{Pb^{2+}}. Excess PbX2+=6.00−5.00=1.00 mmol\ce{Pb^{2+}} = 6.00 - 5.00 = 1.00\text{ mmol}. Total volume =100.0 mL= 100.0\text{ mL}. Final [PbX2+]=1.00 mmol100.0 mL=0.0100 M[\ce{Pb^{2+}}] = \frac{1.00\text{ mmol}}{100.0\text{ mL}} = 0.0100\text{ M}.

03

You mix 30.0 mL30.0\text{ mL} of 0.250 M AgNOX3(aq)0.250\text{ M }\ce{AgNO3}(aq) with 20.0 mL20.0\text{ mL} of 0.150 M KX2CrOX4(aq)0.150\text{ M }\ce{K2CrO4}(aq) to form brick-red AgX2CrOX4(s)\ce{Ag2CrO4}(s) via 2AgX+(aq)+CrOX4X2−(aq)→AgX2CrOX4(s)2\ce{Ag+}(aq) + \ce{CrO4^{2-}}(aq) \rightarrow \ce{Ag2CrO4}(s). Determine which ion is in excess and find its final molar concentration in the mixture.

Answer

[AgX+]=0.0300 M[\ce{Ag+}] = 0.0300\text{ M}. Key steps: n(AgX+)=30.0 mL×0.250 M=7.50 mmoln(\ce{Ag+}) = 30.0\text{ mL} \times 0.250\text{ M} = 7.50\text{ mmol}; n(CrOX4X2−)=20.0 mL×0.150 M=3.00 mmoln(\ce{CrO4^{2-}}) = 20.0\text{ mL} \times 0.150\text{ M} = 3.00\text{ mmol}. Consuming 3.00 mmol CrOX4X2−3.00\text{ mmol }\ce{CrO4^{2-}} requires 2×3.00=6.00 mmol AgX+2 \times 3.00 = 6.00\text{ mmol }\ce{Ag+}. Excess AgX+=7.50−6.00=1.50 mmol\ce{Ag+} = 7.50 - 6.00 = 1.50\text{ mmol}. Total volume =30.0+20.0=50.0 mL= 30.0 + 20.0 = 50.0\text{ mL}. Final [AgX+]=1.50 mmol50.0 mL=0.0300 M[\ce{Ag+}] = \frac{1.50\text{ mmol}}{50.0\text{ mL}} = 0.0300\text{ M}.

Loading workspace…