Resources
In a nuclear medicine quality-assurance laboratory, a aliquot of an acidic radioactive waste solution containing strontium-90 (, ) is analyzed after aging in storage for . To quantify the remaining unreacted non-radioactive carrier acid () and establish safety bounds, the technician titrates the aliquot with standardized . The equivalence point requires exactly of titrant. Given that the initial molarity of in the aliquot prior to the decay was known to be , calculate the remaining molar concentration of in the solution at the time of titration. Express your final answer in scientific notation to three significant figures.
Answer and steps
Final answer
Steps
Identify the Relevant Data and Separate Extraneous Information
Radioactive decay follows first-order kinetics and depends exclusively on the decay constant (or half-life) and elapsed time:
- Initial concentration,
- Half-life of strontium-90,
- Total decay time,
Common Pitfall: The titration with determines the concentration of the carrier acid (), not the concentration of radioactive strontium. Since the problem directly provides the initial concentration of , the titration data is extraneous and not needed for this calculation.
Determine the Number of Half-Lives Elapsed
The number of half-lives, , that have elapsed during storage is given by:
Substitute the given time values:
Exactly half-lives have passed.
Calculate the Remaining Concentration
For every half-life that elapses, the remaining concentration of a radionuclide is reduced by half:
Substitute the initial concentration and :
The remaining molar concentration of after is .
Typical errors
01 The student misidentifies the half-life as the mean lifetime by setting the decay constant to k = 1/t1/2 rather than ln(2)/t1/2, resulting in an underestimated remaining concentration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You defined the decay constant as the reciprocal of the half-life. For first-order radioactive decay, the half-life is related to the decay constant by , so .
- Step 2Correct
Your exponential setup and arithmetic substitution were mathematically sound, but they inherited the incorrect decay constant from Step 1.
- Step 3Correct
Your final calculation accurately evaluated the expression from Step 2, but the final numerical value is incorrect due to the initial formula error in Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the titration data applies only to the carrier acid and is extraneous to the strontium decay calculation.
You correctly identified that nuclear decay follows first-order exponential kinetics.
You carried out the exponential multiplication and scientific notation rounding accurately according to your written formula.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual error confusing half-life () with mean lifetime ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used the relation instead of . The reciprocal of is the mean lifetime (), the time required for a sample to decay to of its initial value, whereas half-life requires an extra factor of because the concentration halves ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Half-Life vs. Mean Lifetime
For first-order decay, .
Whenever you are given half-life , always include in the numerator when solving for , or directly use .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the number of elapsed half-lives: .
Alternatively, calculate the decay constant: .
Calculate the remaining concentration: .
02 The student calculates the concentration of 90Sr2+ that decayed rather than the remaining concentration by multiplying the initial molarity by the decayed fraction instead of the remaining fraction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The question asks for the remaining molar concentration of , not the amount lost to decay. The fraction remaining after half-lives is , whereas represents the fraction that has decayed.
- Step 3Correct
Your final calculation evaluated the expression from Step 2 accurately, but the numerical result reflects the concentration that decayed rather than the remaining concentration.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly filtered out the extraneous titration data involving and .
You calculated the exact number of elapsed half-lives as .
You accurately carried out the arithmetic operations.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou solved for the quantity that had decayed instead of the quantity remaining, using the decayed fraction in place of the remaining fraction .
REASONING PATH
Your ACEpath teacher’s suggested approach- Target Quantity Check
For radioactive decay, the fraction of original nuclei remaining after half-lives is , while the fraction decayed is .
Always re-read the prompt prompt keywords: if asked for 'remaining', multiply by ; only subtract from if explicitly asked for the amount 'decayed' or 'lost'.
- Reasonableness / Direction of Change
After multiple half-lives, the remaining concentration of a reactant must be substantially smaller than its initial concentration.
Check that after half-lives, the remaining concentration is of the start, not .
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that after half-lives, the fraction of remaining is .
Multiply the initial concentration by the remaining fraction: .
Evaluate the product to three significant figures: .
03 The student incorporates the extraneous titration data by applying a dilution factor for the combined volume at the equivalence point rather than reporting the concentration in the aged aliquot.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You calculated the concentration in the combined solution at the titration equivalence point. The prompt asked for the concentration of in the solution at the time of titration (the aged aliquot being tested), so the titration volume was extraneous information.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the number of elapsed half-lives from the storage time and half-life.
You correctly applied the half-life decay formula to determine the decayed concentration in the original aliquot.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeApplying a post-titration dilution factor to the aliquot concentration.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that every numerical quantity provided in an analytical scenario (the titration volume and concentration used to quantify the carrier acid) must be integrated into the final formula, leading you to calculate the final concentration in the titrated mixture rather than in the sample aliquot itself.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define the Target System
Identify the exact physical state and sample referenced by the question before applying volume adjustments.
Notice whether the question asks for the concentration in the aliquot being analyzed or in the final reaction mixture.
- Filter Extraneous Analytical Data
Data from side-assays (such as titrating an inactive carrier acid) do not affect an independently known radioactive analyte concentration.
Check if a given measurement is intended to quantify a completely different species before incorporating it into your calculation.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that the question asks for the concentration of in the solution at the time of titration (the aged aliquot).
Recognize that adding titrant measures the carrier acid and does not change the pre-titration concentration of strontium-90 in the aliquot.
Report the concentration obtained after radioactive decay without applying any dilution.
Lock it in
What is the exact mathematical relationship between the first-order decay constant and the half-life ?
. Setting forgets that decay halves rather than drops by a factor of .
Similar question
Phosphorus-32 () is a beta emitter with a half-life of . If an initial sample contains of , how many moles remain after ?
Answer
. Calculate the number of elapsed half-lives: . Then, .
Iodine-131 () has a half-life of . (a) Calculate its decay constant in . (b) If a patient receives an initial dose of , calculate the mass of remaining after .
Answer
(a) ; (b) . Key steps: . Then, .
A research laboratory analyzes a aliquot of tritiated water (, ). An analyst mistakenly calculates the decay constant as instead of and computes the remaining activity after . Determine the ratio of the true remaining activity to the analyst's erroneously calculated activity.
Answer
Ratio . Key steps: Two half-lives elapse (). The true remaining fraction is . The erroneous formula gives . Ratio of true to erroneous activity is .