Resources

An ultra-high vacuum (UHV) chamber operating at 273.15 K273.15\text{ K} has an internal pressure reduced to an extreme asymptotic limit of 1.00×10−10 Torr1.00 \times 10^{-10}\text{ Torr} (1 atm=760 Torr1\text{ atm} = 760\text{ Torr}). Treating the residual gas as an ideal gas where 1 mol1\text{ mol} occupies 22.414 L22.414\text{ L} at 1 atm1\text{ atm} and 273.15 K273.15\text{ K}: (a) calculate the molar concentration of the residual gas inside the chamber in mol/L\text{mol/L}, (b) calculate the number of gas molecules contained within a single cubic centimeter (1.00 cm3=1.00×10−3 L1.00\text{ cm}^3 = 1.00 \times 10^{-3}\text{ L}) of this vacuum space, and (c) determine the volume in liters of this ultra-high vacuum required to enclose just one mole of gas molecules.

Answer and steps

Final answer

(a) c=5.87×10−15 mol/Lc = 5.87 \times 10^{-15}\text{ mol/L}, (b) N=3.54×106 molecules/cm3N = 3.54 \times 10^6\text{ molecules/cm}^3, (c) V=1.70×1014 LV = 1.70 \times 10^{14}\text{ L}

Steps

Part (a): Find the molar concentration (cc) of the residual gas

  1. Convert the pressure from Torr\text{Torr} to atm\text{atm}: The relationship between atmospheres and Torr\text{Torr} is 1 atm=760 Torr1\text{ atm} = 760\text{ Torr}. P=1.00×10−10 Torr760 Torr/atm≈1.316×10−13 atmP = \frac{1.00 \times 10^{-10}\text{ Torr}}{760\text{ Torr/atm}} \approx 1.316 \times 10^{-13}\text{ atm}
  2. Calculate the molar concentration using the ideal gas relationship: At standard temperature (273.15 K273.15\text{ K}) and standard pressure (1.00 atm1.00\text{ atm}), 1 mol1\text{ mol} of an ideal gas occupies a volume of Vm∘=22.414 LV_m^\circ = 22.414\text{ L}.

    Because temperature is constant at 273.15 K273.15\text{ K}, molar concentration c=nVc = \frac{n}{V} is directly proportional to pressure (P∝cP \propto c): c=PP∘⋅1Vm∘c = \frac{P}{P^\circ} \cdot \frac{1}{V_m^\circ} c=(1.316×10−13 atm1.00 atm)⋅(1 mol22.414 L)≈5.87×10−15 mol/Lc = \left(\frac{1.316 \times 10^{-13}\text{ atm}}{1.00\text{ atm}}\right) \cdot \left(\frac{1\text{ mol}}{22.414\text{ L}}\right) \approx 5.87 \times 10^{-15}\text{ mol/L}


Part (b): Calculate the number of molecules in 1.00 cm31.00\text{ cm}^3

  1. Convert volume to liters and find the moles of gas: V=1.00 cm3=1.00×10−3 LV = 1.00\text{ cm}^3 = 1.00 \times 10^{-3}\text{ L} n=c⋅V=(5.8704×10−15 mol/L)⋅(1.00×10−3 L)=5.8704×10−18 moln = c \cdot V = (5.8704 \times 10^{-15}\text{ mol/L}) \cdot (1.00 \times 10^{-3}\text{ L}) = 5.8704 \times 10^{-18}\text{ mol}
  2. Convert moles to number of molecules using Avogadro's number (NA=6.022×1023 molecules/molN_A = 6.022 \times 10^{23}\text{ molecules/mol}): N=n⋅NAN = n \cdot N_A N=(5.8704×10−18 mol)⋅(6.022×1023 molecules/mol)≈3.54×106 moleculesN = (5.8704 \times 10^{-18}\text{ mol}) \cdot (6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.54 \times 10^6\text{ molecules}

    Pitfall to avoid: Even in an "ultra-high vacuum," a cubic centimeter still holds several million molecules because Avogadro's constant is extraordinarily large.


Part (c): Determine the volume required to contain 1.00 mol1.00\text{ mol} of gas

  1. Calculate the volume per mole (molar volume, VmV_m) at this vacuum pressure: Since concentration is moles per liter (c=nVc = \frac{n}{V}), the volume occupied by 1 mol1\text{ mol} is the reciprocal of the molar concentration: V=nc=1.00 mol5.8704×10−15 mol/L≈1.70×1014 LV = \frac{n}{c} = \frac{1.00\text{ mol}}{5.8704 \times 10^{-15}\text{ mol/L}} \approx 1.70 \times 10^{14}\text{ L}

    Alternatively, using Boyle's Law (P1V1=P2V2P_1 V_1 = P_2 V_2) at constant TT: V=22.414 L⋅(760 Torr1.00×10−10 Torr)=1.70×1014 LV = 22.414\text{ L} \cdot \left(\frac{760\text{ Torr}}{1.00 \times 10^{-10}\text{ Torr}}\right) = 1.70 \times 10^{14}\text{ L}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the pressure from Torr to atmospheres before applying standard molar volume, leading to an answer that is a factor of 760 too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    c=PR×T=1.00×10−1022.414  ⟹  c=4.46×10−12 mol/Lc = \frac{P}{R \times T} = \frac{1.00 \times 10^{-10}}{22.414} \implies c = 4.46 \times 10^{-12}\text{ mol/L}

    Correct

    P=1.00×10−10 Torr760 Torr/atm≈1.316×10−13 atm  ⟹  c=PVm∘=1.316×10−13 atm22.414 L⋅atm/mol≈5.87×10−15 mol/LP = \frac{1.00 \times 10^{-10}\text{ Torr}}{760\text{ Torr/atm}} \approx 1.316 \times 10^{-13}\text{ atm} \implies c = \frac{P}{V_m^\circ} = \frac{1.316 \times 10^{-13}\text{ atm}}{22.414\text{ L}\cdot\text{atm/mol}} \approx 5.87 \times 10^{-15}\text{ mol/L}

    You used R⋅T=22.414 L⋅atm/molR \cdot T = 22.414\text{ L}\cdot\text{atm/mol}, which requires the pressure PP to be in atmospheres (atm\text{atm}). Because you plugged in P=1.00×10−10 TorrP = 1.00 \times 10^{-10}\text{ Torr} without dividing by 760 Torr/atm760\text{ Torr/atm}, your concentration was a factor of 760760 too large.

  2. Step 2

    n=c×V=(4.4615×10−12 mol/L)×(1.00×10−3 L)=4.4615×10−15 mol  ⟹  N=(4.4615×10−15 mol)×(6.022×1023 molecules/mol)=2.69×109 moleculesn = c \times V = (4.4615 \times 10^{-12}\text{ mol/L}) \times (1.00 \times 10^{-3}\text{ L}) = 4.4615 \times 10^{-15}\text{ mol} \implies N = (4.4615 \times 10^{-15}\text{ mol}) \times (6.022 \times 10^{23}\text{ molecules/mol}) = 2.69 \times 10^9\text{ molecules}

    Correct

    n=(5.8704×10−15 mol/L)×(1.00×10−3 L)=5.8704×10−18 mol  ⟹  N=n×NA=(5.8704×10−18 mol)×(6.022×1023 molecules/mol)≈3.54×106 moleculesn = (5.8704 \times 10^{-15}\text{ mol/L}) \times (1.00 \times 10^{-3}\text{ L}) = 5.8704 \times 10^{-18}\text{ mol} \implies N = n \times N_A = (5.8704 \times 10^{-18}\text{ mol}) \times (6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.54 \times 10^6\text{ molecules}

    Your method of multiplying concentration by volume to find moles and then multiplying by Avogadro's number is completely correct, but the numerical answer inherits the error from Step 1.

  3. Step 3

    V=1c=14.4615×10−12 mol/L=2.24×1011 LV = \frac{1}{c} = \frac{1}{4.4615 \times 10^{-12}\text{ mol/L}} = 2.24 \times 10^{11}\text{ L}

    Correct

    V=1c=15.8704×10−15 mol/L≈1.70×1014 LV = \frac{1}{c} = \frac{1}{5.8704 \times 10^{-15}\text{ mol/L}} \approx 1.70 \times 10^{14}\text{ L}

    You correctly recognized that the volume containing one mole is the reciprocal of the molar concentration (V=1cV = \frac{1}{c}), but your result inherits the uncorrected concentration from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related concentration to pressure and standard molar volume via c=PRTc = \frac{P}{RT}.

You correctly converted cubic centimeters to liters using 1.00 cm3=1.00×10−3 L1.00\text{ cm}^3 = 1.00 \times 10^{-3}\text{ L}.

You applied Avogadro's constant correctly to find the number of molecules.

You correctly identified that the volume occupied by one mole is the reciprocal of molar concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission (Pressure)

You entered pressure in Torr instead of atmospheres when dividing by the standard molar volume.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit consistency in gas law constants: the molar volume of 22.414 L/mol22.414\text{ L/mol} is specific to standard pressure of 1 atm1\text{ atm}, so any pressure used alongside it must be converted to atmospheres first (1 atm=760 Torr1\text{ atm} = 760\text{ Torr}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Pressure Units to Gas Constants
  • Before dividing pressure by 22.414 L/mol22.414\text{ L/mol} (or using R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})), confirm that pressure is in atm\text{atm}.

  • Divide pressure in Torr\text{Torr} or mmHg\text{mmHg} by 760760 to obtain pressure in atm\text{atm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the chamber pressure to atmospheres: P=1.00×10−10 Torr760 Torr/atm≈1.316×10−13 atmP = \frac{1.00 \times 10^{-10}\text{ Torr}}{760\text{ Torr/atm}} \approx 1.316 \times 10^{-13}\text{ atm}.

  2. Calculate the molar concentration: c=1.316×10−13 atm22.414 L⋅atm/mol≈5.87×10−15 mol/Lc = \frac{1.316 \times 10^{-13}\text{ atm}}{22.414\text{ L}\cdot\text{atm/mol}} \approx 5.87 \times 10^{-15}\text{ mol/L}.

  3. Calculate the number of molecules in 1.00 cm31.00\text{ cm}^3: N=(5.8704×10−15 mol/L)×(1.00×10−3 L)×(6.022×1023 molecules/mol)≈3.54×106 moleculesN = (5.8704 \times 10^{-15}\text{ mol/L}) \times (1.00 \times 10^{-3}\text{ L}) \times (6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.54 \times 10^6\text{ molecules}.

  4. Determine the volume required for 1.00 mol1.00\text{ mol}: V=1c=15.8704×10−15 mol/L≈1.70×1014 LV = \frac{1}{c} = \frac{1}{5.8704 \times 10^{-15}\text{ mol/L}} \approx 1.70 \times 10^{14}\text{ L}.

Final answer

(a) c=5.87×10−15 mol/Lc = 5.87 \times 10^{-15}\text{ mol/L}, (b) N=3.54×106 moleculesN = 3.54 \times 10^6\text{ molecules}, (c) V=1.70×1014 LV = 1.70 \times 10^{14}\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out explicit units beside every number in ideal gas calculations to catch mismatched pressure units immediately.

  • Practice converting vacuum pressures given in Torr, mbar, or Pa into atmospheres prior to applying standard molar volume ratios.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies 1 cm³ as 1 L instead of converting cubic centimeters to liters, yielding an answer for molecule count that is a factor of 1000 too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=1.00×10−10 Torr760 Torr/atm=1.316×10−13 atm  ⟹  c=1.316×10−13 atm22.414 L/mol=5.87×10−15 mol/LP = \frac{1.00 \times 10^{-10}\text{ Torr}}{760\text{ Torr/atm}} = 1.316 \times 10^{-13}\text{ atm} \implies c = \frac{1.316 \times 10^{-13}\text{ atm}}{22.414\text{ L/mol}} = 5.87 \times 10^{-15}\text{ mol/L}

  2. Step 2

    V=1.00 LV = 1.00\text{ L}

    Correct

    V=1.00 cm3=1.00×10−3 LV = 1.00\text{ cm}^3 = 1.00 \times 10^{-3}\text{ L}

    You treated 1.00 cm31.00\text{ cm}^3 as 1.00 L1.00\text{ L}. Since 1 cm3=1 mL=10−3 L1\text{ cm}^3 = 1\text{ mL} = 10^{-3}\text{ L}, the volume in liters should be 1.00×10−3 L1.00 \times 10^{-3}\text{ L}.

  3. Step 3

    n=(5.87×10−15 mol/L)×1.00 L=5.87×10−15 mol  ⟹  N=(5.87×10−15 mol)×(6.022×1023 molecules/mol)=3.54×109 moleculesn = (5.87 \times 10^{-15}\text{ mol/L}) \times 1.00\text{ L} = 5.87 \times 10^{-15}\text{ mol} \implies N = (5.87 \times 10^{-15}\text{ mol}) \times (6.022 \times 10^{23}\text{ molecules/mol}) = 3.54 \times 10^9\text{ molecules}

    Correct

    N=c⋅V⋅NA=(5.87×10−15 mol/L)×(1.00×10−3 L)×(6.022×1023 molecules/mol)≈3.54×106 moleculesN = c \cdot V \cdot N_A = (5.87 \times 10^{-15}\text{ mol/L}) \times (1.00 \times 10^{-3}\text{ L}) \times (6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.54 \times 10^6\text{ molecules}

    Your multiplication and use of Avogadro's constant were executed properly, but the numerical result was overstated by 10310^3 due to the earlier volume conversion error.

  4. Step 4

    V=1c=15.87×10−15 mol/L=1.70×1014 LV = \frac{1}{c} = \frac{1}{5.87 \times 10^{-15}\text{ mol/L}} = 1.70 \times 10^{14}\text{ L}

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted pressure from Torr\text{Torr} to atm\text{atm}.

You correctly calculated the molar concentration of the gas in mol/L\text{mol/L}.

You correctly set up the formula linking moles to molecules using Avogadro's constant.

You calculated the molar volume in part (c) without any errors.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric volume conversion error

You substituted V=1.00 LV = 1.00\text{ L} instead of converting 1.00 cm31.00\text{ cm}^3 to liters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating metric units of volume (treating 1 cm31\text{ cm}^3 as 1 L1\text{ L} instead of 1 mL=10−3 L1\text{ mL} = 10^{-3}\text{ L}) leads to a concentration or quantity mismatch whenever concentrations are expressed per liter.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cubic Centimeter to Liter Identity
  • 1 cm3=1 mL=10−3 L1\text{ cm}^3 = 1\text{ mL} = 10^{-3}\text{ L}, whereas 1 L=1000 cm3=1 dm31\text{ L} = 1000\text{ cm}^3 = 1\text{ dm}^3.

  • Always verify that the volume unit matches the denominator of your concentration ([c]=mol/L[c] = \text{mol/L}) before multiplying.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given volume to liters: V=1.00 cm3=1.00×10−3 LV = 1.00\text{ cm}^3 = 1.00 \times 10^{-3}\text{ L}.

  2. Calculate the amount of substance in moles: n=c⋅V=(5.87×10−15 mol/L)×(1.00×10−3 L)=5.87×10−18 moln = c \cdot V = (5.87 \times 10^{-15}\text{ mol/L}) \times (1.00 \times 10^{-3}\text{ L}) = 5.87 \times 10^{-18}\text{ mol}.

  3. Convert moles to the number of molecules using Avogadro's number: N=n⋅NA=(5.87×10−18 mol)×(6.022×1023 molecules/mol)≈3.54×106 moleculesN = n \cdot N_A = (5.87 \times 10^{-18}\text{ mol}) \times (6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.54 \times 10^6\text{ molecules}.

Final answer

(a) c=5.87×10−15 mol/Lc = 5.87 \times 10^{-15}\text{ mol/L}, (b) N=3.54×106 moleculesN = 3.54 \times 10^6\text{ molecules}, (c) V=1.70×1014 LV = 1.70 \times 10^{14}\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the key bridge conversion between linear dimensions and fluid volumes: 1 cm3=1 mL=10−3 L1\text{ cm}^3 = 1\text{ mL} = 10^{-3}\text{ L}.

  • When checking units, explicitly write out conversion factors (e.g., ×1 L1000 cm3\times \frac{1\text{ L}}{1000\text{ cm}^3}) so that cm3\text{cm}^3 visibly cancels.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the standard molar volume by the pressure reduction factor rather than dividing by it, mistakenly concluding that the required volume decreases under vacuum.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=1.00×10−10 Torr760 Torr/atm=1.316×10−13 atm  ⟹  c=1.316×10−13 atm22.414 L/mol=5.87×10−15 mol/LP = \frac{1.00 \times 10^{-10}\text{ Torr}}{760\text{ Torr/atm}} = 1.316 \times 10^{-13}\text{ atm} \implies c = \frac{1.316 \times 10^{-13}\text{ atm}}{22.414\text{ L/mol}} = 5.87 \times 10^{-15}\text{ mol/L}

  2. Step 2

    n=(5.87×10−15 mol/L)×(1.00×10−3 L)=5.87×10−18 mol  ⟹  N=(5.87×10−18 mol)×(6.022×1023 molecules/mol)=3.54×106 moleculesn = (5.87 \times 10^{-15}\text{ mol/L}) \times (1.00 \times 10^{-3}\text{ L}) = 5.87 \times 10^{-18}\text{ mol} \implies N = (5.87 \times 10^{-18}\text{ mol}) \times (6.022 \times 10^{23}\text{ molecules/mol}) = 3.54 \times 10^6\text{ molecules}

  3. Step 3

    V=22.414 L×(1.316×10−13)  ⟹  V=2.95×10−12 LV = 22.414\text{ L} \times (1.316 \times 10^{-13}) \implies V = 2.95 \times 10^{-12}\text{ L}

    Correct

    V=nc=1.00 mol5.87×10−15 mol/L≈1.70×1014 LV = \frac{n}{c} = \frac{1.00\text{ mol}}{5.87 \times 10^{-15}\text{ mol/L}} \approx 1.70 \times 10^{14}\text{ L}

    You multiplied the molar volume by the relative pressure rather than dividing by it. Under vacuum, gas expands so that a mole occupies an extraordinarily large volume.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted pressure from Torr to atmospheres.

You accurately calculated the molar concentration of the gas in moles per liter.

You applied Avogadro's constant correctly to find the number of molecules in 1.00 cm31.00\text{ cm}^3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Proportionality Confusion (Boyle's Law)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the relationship between gas volume and pressure as directly proportional instead of inversely proportional (Boyle's Law: P1V1=P2V2P_1 V_1 = P_2 V_2), multiplying by the pressure fraction rather than dividing by it (or dividing 1 mol1\text{ mol} by the molar concentration cc).

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse Pressure-Volume Relationship
  • At constant temperature and amount, volume is inversely proportional to pressure (V∝1PV \propto \frac{1}{P}).

  • When pressure drops to a vacuum, the required volume to hold a given amount of gas must increase dramatically.

Volume from Concentration
  • Molar volume at any state is the reciprocal of molar concentration: Vm=1c=VnV_m = \frac{1}{c} = \frac{V}{n}.

  • Divide 1.00 mol1.00\text{ mol} by c=5.87×10−15 mol/Lc = 5.87 \times 10^{-15}\text{ mol/L} to verify that V=1.70×1014 LV = 1.70 \times 10^{14}\text{ L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the relationship between volume, moles, and concentration: V=ncV = \frac{n}{c}.

  2. Substitute n=1.00 moln = 1.00\text{ mol} and c=5.87×10−15 mol/Lc = 5.87 \times 10^{-15}\text{ mol/L}: V=1.00 mol5.87×10−15 mol/LV = \frac{1.00\text{ mol}}{5.87 \times 10^{-15}\text{ mol/L}}.

  3. Alternatively, use Boyle's Law: V2=V1⋅P1P2=22.414 L⋅1 atm1.316×10−13 atm=1.70×1014 LV_2 = V_1 \cdot \frac{P_1}{P_2} = 22.414\text{ L} \cdot \frac{1\text{ atm}}{1.316 \times 10^{-13}\text{ atm}} = 1.70 \times 10^{14}\text{ L}.

Final answer

(a) c=5.87×10−15 mol/Lc = 5.87 \times 10^{-15}\text{ mol/L}, (b) N=3.54×106 moleculesN = 3.54 \times 10^6\text{ molecules}, (c) V=1.70×1014 LV = 1.70 \times 10^{14}\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a reality check on the direction of change: lower pressure means gas expands, so volume must increase.

  • When converting from concentration to volume for a given number of moles, remember that V=ncV = \frac{n}{c} rather than V=n⋅cV = n \cdot c.

Lock it in

Similar question

01

A low-pressure gas sample at 273.15 K273.15\text{ K} has an internal pressure of 3.80×10−2 Torr3.80 \times 10^{-2}\text{ Torr}. Calculate its molar concentration (cc) in mol/L\text{mol/L}. (Assume ideal gas behavior where Vm∘=22.414 L/molV_m^\circ = 22.414\text{ L/mol} at 1 atm1\text{ atm}).

Answer

c=2.23×10−6 mol/Lc = 2.23 \times 10^{-6}\text{ mol/L}. Key steps: P=3.80×10−2 Torr760 Torr/atm=5.00×10−5 atmP = \frac{3.80 \times 10^{-2}\text{ Torr}}{760\text{ Torr/atm}} = 5.00 \times 10^{-5}\text{ atm}; c=P22.414 L⋅atm/mol=5.00×10−522.414≈2.23×10−6 mol/Lc = \frac{P}{22.414\text{ L}\cdot\text{atm/mol}} = \frac{5.00 \times 10^{-5}}{22.414} \approx 2.23 \times 10^{-6}\text{ mol/L}.

02

In a vacuum chamber operating at 273.15 K273.15\text{ K}, the pressure is 1.52×10−7 Torr1.52 \times 10^{-7}\text{ Torr}. How many gas molecules are present in a 2.00 mL2.00\text{ mL} bulb (1 mL=10−3 L1\text{ mL} = 10^{-3}\text{ L})?

Answer

N=1.07×1010 moleculesN = 1.07 \times 10^{10}\text{ molecules}. Key steps: P=1.52×10−7760=2.00×10−10 atmP = \frac{1.52 \times 10^{-7}}{760} = 2.00 \times 10^{-10}\text{ atm}; c=2.00×10−1022.414≈8.923×10−12 mol/Lc = \frac{2.00 \times 10^{-10}}{22.414} \approx 8.923 \times 10^{-12}\text{ mol/L}; n=c⋅V=(8.923×10−12 mol/L)(2.00×10−3 L)=1.785×10−14 moln = c \cdot V = (8.923 \times 10^{-12}\text{ mol/L})(2.00 \times 10^{-3}\text{ L}) = 1.785 \times 10^{-14}\text{ mol}; N=n⋅NA=(1.785×10−14)(6.022×1023)≈1.07×1010 moleculesN = n \cdot N_A = (1.785 \times 10^{-14})(6.022 \times 10^{23}) \approx 1.07 \times 10^{10}\text{ molecules}.

03

An interstellar cloud has an effective temperature of 273.15 K273.15\text{ K} and an extremely low particle density of 1.00×103 molecules/cm31.00 \times 10^3\text{ molecules/cm}^3. Calculate the equivalent pressure of this cloud in Torr\text{Torr}.

Answer

P=2.82×10−14 TorrP = 2.82 \times 10^{-14}\text{ Torr}. Key steps: 1.00×103 molecules/cm3=1.00×106 molecules/L1.00 \times 10^3\text{ molecules/cm}^3 = 1.00 \times 10^6\text{ molecules/L}; c=1.00×106 molecules/L6.022×1023 molecules/mol≈1.66×10−18 mol/Lc = \frac{1.00 \times 10^6\text{ molecules/L}}{6.022 \times 10^{23}\text{ molecules/mol}} \approx 1.66 \times 10^{-18}\text{ mol/L}; P=c⋅(22.414 L⋅atm/mol)≈3.722×10−17 atmP = c \cdot (22.414\text{ L}\cdot\text{atm/mol}) \approx 3.722 \times 10^{-17}\text{ atm}; P=(3.722×10−17 atm)(760 Torr/atm)≈2.82×10−14 TorrP = (3.722 \times 10^{-17}\text{ atm})(760\text{ Torr/atm}) \approx 2.82 \times 10^{-14}\text{ Torr}.

Loading workspace…