Resources
A common intuitive heuristic is that increasing the stoichiometric excess of an inexpensive green reagent (such as water or ethanol in an equilibrium esterification) will always improve the overall sustainability of the process by driving the conversion of a scarce carboxylic acid toward . Consider the synthesis of ethyl acetate (molar mass ) from acetic acid (molar mass ) and ethanol (molar mass ), for which at . In Scheme A, an equimolar feed of acetic acid and ethanol is reacted to equilibrium. In Scheme B, of acetic acid is reacted with a 4-fold stoichiometric excess of ethanol (). In both schemes, any unreacted ethanol is burned or discarded as waste rather than recycled. (a) Calculate the equilibrium fractional conversion of acetic acid for Scheme A and Scheme B. (b) Calculate the Process Mass Intensity (PMI) of the raw reaction mixture for both Scheme A and Scheme B. (c) By what percentage does the PMI increase (worsen) in Scheme B compared to Scheme A?
Answer and steps
Final answer
(a) Scheme A conversion , Scheme B conversion ; (b) Scheme A , Scheme B ; (c) PMI increases by
Steps
Part (a): Equilibrium Fractional Conversion of Acetic Acid
The reversible esterification reaction is:
Since the total number of moles of reactants equals the total number of moles of products (), the reaction volume cancels out in the equilibrium constant expression:
Scheme A (Equimolar Feed: and )
Let be the moles of acetic acid reacted at equilibrium:
- Equilibrium moles: , , , .
Substitute into the equilibrium expression:
Taking the square root of both sides:
The fractional conversion of acetic acid for Scheme A is:
Scheme B (Excess Ethanol Feed: and )
Let be the moles of acetic acid reacted at equilibrium:
- Equilibrium moles: , , , .
Setting up the equilibrium expression:
Solving this equilibrium relation yields an equilibrium conversion for Scheme B of:
Part (b): Process Mass Intensity (PMI)
Process Mass Intensity (PMI) quantifies the total mass of materials required to produce a unit mass of isolated product:
Using the molar masses:
- Acetic acid ():
- Ethanol ():
- Ethyl acetate ():
Scheme A:
- Total input mass:
- Mass of ethyl acetate produced:
- PMI:
Scheme B:
- Total input mass:
- Mass of ethyl acetate produced:
- PMI:
Part (c): Percentage Increase in PMI
The percentage increase (worsening) of the PMI in Scheme B relative to Scheme A is:
Key Pitfall in Green Chemistry Metrics: A higher chemical conversion does not automatically imply a greener or more sustainable process. Although driving the equilibrium with a 4-fold stoichiometric excess of ethanol increases acetic acid conversion from to , discarding the unreacted excess ethanol substantially increases the total material input per unit of product, worsening the Process Mass Intensity by .
Typical errors
01 The student misinterprets a 4-fold stoichiometric excess as 4.000 mol of excess reagent added on top of the 1.000 mol stoichiometric amount, using 5.000 mol of ethanol instead of 4.000 mol.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
- Step 2
,
Correct,
You treated the 4-fold stoichiometric excess as an additional added to the stoichiometric ( total), but the problem specified that the 4-fold stoichiometric excess corresponds to a total feed of of ethanol.
- Step 3
- Step 4Correct
,
Your PMI calculation method for Scheme B is mathematically sound, but the numerical result is affected by your earlier use of ethanol instead of .
- Step 5Correct
Your relative percentage increase formula is correct, but the numerical answer is shifted due to the propagated PMI error from Scheme B.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up and solved the equilibrium expression for Scheme A.
You properly used the standard Process Mass Intensity formula .
You correctly calculated the percentage change between your two PMI values.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou interpreted an N-fold stoichiometric excess as adding N stoichiometric equivalents on top of the base stoichiometric amount (1 + N = 5 equivalents), rather than feeding N stoichiometric equivalents in total as clarified in the problem statement.
REASONING PATH
Your ACEpath teacher’s suggested approach- Stoichiometric Multiplier vs. Percent Excess
In chemical process engineering, an '-fold stoichiometric ratio/excess' typically means . In contrast, 'a excess' means .
Always check whether the problem specifies the total mole feed explicitly (such as '4-fold stoichiometric excess ()') before adding quantities to the base amount.
CORRECTED PATH
ACEpath Teacher's DemonstrationFor Scheme B, use and set up the equilibrium equation: .
Expand and rearrange: .
Solve for the physically meaningful root: , giving .
Calculate Scheme B input mass: , and product mass: .
Calculate Scheme B PMI: .
Calculate percentage increase: .
(a) Scheme A conversion , Scheme B conversion ; (b) Scheme A PMI , Scheme B PMI ; (c) PMI increases by
02 The student omits water from the equilibrium expression, treating esterification as a combination reaction where Kc = [ester] / ([acid][alcohol]), leading to an incorrect conversion for Scheme B.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In an esterification reaction, water is formed in an equimolar amount with the ester (). The numerator must represent both products, , rather than just .
- Step 3
- Step 4Correct
Your formula and total input mass calculation for Scheme B were completely correct, but your product mass and final PMI were affected by using instead of .
- Step 5Correct
Your percentage increase formula was applied correctly to your calculated PMI values, but the final numerical value was carried forward from the earlier conversion error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly balanced the equilibrium expression and solved the conversion for Scheme A.
You correctly defined Process Mass Intensity as the ratio of total input mass to product mass.
You accurately calculated the total raw input masses for both reaction schemes.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou included in Scheme A, but accidentally wrote in the numerator of Scheme B's expression.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating esterification as an addition reaction () rather than a condensation reaction () when the stoichiometry is non-equimolar, thereby forgetting that must be included as a product term in non-aqueous equilibria.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check all reaction products in $K_c$
For a condensation reaction carried out in neat liquid or non-aqueous media, the equilibrium expression is .
Always write out the full stoichiometric equation first and verify that every product formed by the reaction appears with its respective power in the numerator of .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the equilibrium expression for Scheme B including water: .
Expand and rearrange: , which simplifies to .
Solve for : .
Calculate ethyl acetate mass for Scheme B: .
Compute .
Calculate percentage increase: .
(a) Scheme A conversion , Scheme B conversion ; (b) Scheme A , Scheme B ; (c) PMI increases by
03 The student confuses Process Mass Intensity with E-factor by dividing total waste mass rather than total input mass by product mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You divided the waste mass by the product mass (), which defines the Sheldon -factor. Process Mass Intensity (PMI) is defined as the ratio of total input mass to desired product mass (), so .
- Step 3Correct
Your relative percentage change formula is correct, but your final answer is affected by carrying forward the -factor values from Part (b) instead of the true PMI values.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up and solved the equilibrium expressions for both reaction conditions.
You accurately calculated the total raw input masses and product masses for both schemes.
You correctly applied the relative percentage change formula in Part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misunderstanding of the definition of Process Mass Intensity versus the Sheldon E-factor.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used the formula for the Environmental Factor () instead of Process Mass Intensity (). Because all mass not incorporated into the product becomes waste by conservation of mass (), the two metrics are directly related by . An ideal process has an -factor of , but an ideal PMI of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Recall the exact definition of Process Mass Intensity (PMI)
Always place the total input mass (reactants, reagents, solvents, catalysts) in the numerator, never the waste mass alone.
- Distinguish PMI from Sheldon's E-factor
Check the theoretical minimum: the best possible -factor is (zero waste), while the best possible PMI is ( of input mass becomes product).
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate using total inputs: .
Recalculate using total inputs: .
Compute the relative increase: .
(a) Scheme A conversion , Scheme B conversion (or ); (b) Scheme A , Scheme B ; (c) PMI increases by
Lock it in
What does a '4-fold stoichiometric amount' (or 4 equivalents) mean for a reactant requiring 1 mole stoichiometrically?
It means the total feed is , not . Memory cue: '-fold' multiplies the base stoichiometric quantity by .
Similar question
A reaction is run with of A and a 3-fold stoichiometric excess of B ( total feed). If of product C is formed, calculate the unreacted moles of B remaining at the end of the reaction.
Answer
Since of A reacts with B, of B is consumed. Moles of B remaining .
A synthesis produces of desired drug substance from raw material inputs consisting of of starting material, of reagent, and of solvent (none of which is recycled). Calculate the Process Mass Intensity (PMI).
Answer
. .
An esterification equilibrium has . Scheme 1 feeds A and B. Scheme 2 feeds A and B. Determine the fractional conversion of A in Scheme 2, and identify why an unseparated excess of B increases waste.
Answer
Let conversion be : . Solving the quadratic gives (95.1% conversion). Although conversion improves from to , the extra of unreacted B ends up in the waste stream if not recycled, drastically inflating the mass of inputs per gram of product.