Resources

An analytical food chemistry student standardizes an unknown sample of hydrolyzed whey protein by quantifying free amino nitrogen via a classical Formol titration. Formaldehyde is added to convert primary amines into neutral hydroxymethyl derivatives, liberating stoichiometric hydronium ions that are titrated with standardized NaOH\text{NaOH}. A 25.00 mL25.00\text{ mL} aliquot of the protein hydrolysate requires exactly 18.40 mL18.40\text{ mL} of 0.0520 M NaOH0.0520\text{ M }\text{NaOH} to reach the phenolphthalein end point (pH 9.0\text{pH } 9.0). In a parallel spectroscopic test on the same hydrolysate, a Benedict's reagent test yields no red cuprous oxide (Cu2O\text{Cu}_2\text{O}) precipitate, while a Bradford Coomassie Brilliant Blue G-250 assay confirms the presence of polypeptide fragments. (a) Calculate the molar concentration of titratable free amino groups in the original hydrolysate in mmol/L\text{mmol/L}. (b) If each cleaved peptide bond liberates exactly one free amino group, calculate the total mass of peptide-bound nitrogen in mg\text{mg} contained within a 100.0 mL100.0\text{ mL} stock volume of this hydrolysate (atomic weight of N=14.007 g/mol\text{N} = 14.007\text{ g/mol}). (c) Interpret the negative Benedict's test in terms of macromolecular classification.

Answer and steps

Final answer

(a) 38.3 mmol/L38.3\text{ mmol/L}; (b) 53.6 mg53.6\text{ mg}; (c) The negative Benedict's test confirms the absence of reducing carbohydrates (free monosaccharides or reducing sugars with open-chain hemiacetal aldehydes/α\alpha-hydroxy ketones), proving the sample is free of carbohydrate contamination.

Steps

Part (a): Molar Concentration of Free Amino Groups

  1. Principle of the Formol Titration: In an aqueous solution at neutral pH\text{pH}, free amino groups exist primarily in their protonated zwitterionic form (−NHX3X+\ce{-NH3+}), which cannot be directly titrated with a standard base because their pKa\text{p}K_{\text{a}} values are typically high (≈9–10\approx 9\text{--}10). When excess formaldehyde (HCHO\ce{HCHO}) is added, it reacts with the unprotonated amino group to form stable mono- or dimethylol derivatives: −NHX3X++HCHO⇌−NH(CHX2OH)+HX+\ce{-NH3+ + HCHO <=> -NH(CH2OH) + H+} This shifts the amine's effective pKa\text{p}K_{\text{a}} downward into an easily titratable range, liberating one equivalent of hydronium ion (HX3OX+\ce{H3O+}) for every titratable amino group, which is then neutralized by NaOH\ce{NaOH}: HX++OHX−→HX2O\ce{H+ + OH- -> H2O} Therefore, the stoichiometric relationship is: Moles of titratable −NHX2=Moles of NaOH\text{Moles of titratable } \ce{-NH2} = \text{Moles of } \ce{NaOH}
  2. Calculate the Moles of NaOH\ce{NaOH} Consumed: nNaOH=CNaOH⋅VNaOH=(0.0520 mol/L)⋅(0.01840 L)=9.568×10−4 mol=0.9568 mmoln_{\ce{NaOH}} = C_{\ce{NaOH}} \cdot V_{\ce{NaOH}} = (0.0520\text{ mol/L}) \cdot (0.01840\text{ L}) = 9.568 \times 10^{-4}\text{ mol} = 0.9568\text{ mmol}
  3. Calculate the Concentration of Free Amino Groups in the Hydrolysate: [−NHX2]=nNaOHValiquot=0.9568 mmol0.02500 L=38.272 mmol/L≈38.3 mmol/L[\ce{-NH2}] = \frac{n_{\ce{NaOH}}}{V_{\text{aliquot}}} = \frac{0.9568\text{ mmol}}{0.02500\text{ L}} = 38.272\text{ mmol/L} \approx 38.3\text{ mmol/L}

Part (b): Mass of Cleaved Nitrogen in the Stock Solution

  1. Calculate the Total Moles of Amino Nitrogen in 100.0 mL100.0\text{ mL}: Because each liberated amino group contains exactly one nitrogen atom derived from a cleaved peptide bond, the molar amount of amino nitrogen in a 100.0 mL100.0\text{ mL} (0.1000 L0.1000\text{ L}) sample is: nN=[−NHX2]⋅Vstock=(38.272 mmol/L)⋅(0.1000 L)=3.8272 mmoln_{\ce{N}} = [\ce{-NH2}] \cdot V_{\text{stock}} = (38.272\text{ mmol/L}) \cdot (0.1000\text{ L}) = 3.8272\text{ mmol}
  2. Calculate the Total Mass of Nitrogen: Using the atomic weight of nitrogen (MN=14.007 g/mol=14.007 mg/mmolM_{\ce{N}} = 14.007\text{ g/mol} = 14.007\text{ mg/mmol}): mN=nN⋅MN=3.8272 mmol⋅14.007 mg/mmol=53.6076 mg≈53.6 mgm_{\ce{N}} = n_{\ce{N}} \cdot M_{\ce{N}} = 3.8272\text{ mmol} \cdot 14.007\text{ mg/mmol} = 53.6076\text{ mg} \approx 53.6\text{ mg}

Part (c): Macromolecular Classification from Benedict's Test

  1. Biochemical Basis of the Benedict's Assay: Benedict's reagent contains cupric ions (CuX2+\ce{Cu^2+}) complexed with citrate in an alkaline medium. Reducing sugars—such as monosaccharides (e.g., glucose, galactose) or disaccharides with a free hemiacetal group (e.g., lactose)—readily reduce blue CuX2+\ce{Cu^2+} to insoluble brick-red cuprous oxide (CuX2O\ce{Cu2O}) upon heating.
  2. Significance of the Negative Result: Whey is naturally derived from milk, which contains high amounts of the carbohydrate lactose. The lack of a red CuX2O\ce{Cu2O} precipitate proves that reducing carbohydrates (free monosaccharides and open-chain reducing sugars) are absent. Coupled with the positive Bradford assay, this confirms the sample consists of protein fragments and peptides free of carbohydrate contamination.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to scale the concentration from the 25.00 mL aliquot to the 100.0 mL stock volume, calculating mass based only on the 25.00 mL sample.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(NaOH)=0.0520 M×0.01840 L=0.0009568 mol=0.9568 mmol  ⟹  C=0.9568 mmol/0.02500 L=38.27 mmol/Ln(\text{NaOH}) = 0.0520\text{ M} \times 0.01840\text{ L} = 0.0009568\text{ mol} = 0.9568\text{ mmol} \implies C = 0.9568\text{ mmol} / 0.02500\text{ L} = 38.27\text{ mmol/L}

  2. Step 2

    n(N)=0.0009568 mol  ⟹  m(N)=0.0009568 mol×14.007 g/mol=0.01340 g=13.40 mgn(\text{N}) = 0.0009568\text{ mol} \implies m(\text{N}) = 0.0009568\text{ mol} \times 14.007\text{ g/mol} = 0.01340\text{ g} = 13.40\text{ mg}

    Correct

    m(N)=C×Vstock×MN=(38.272 mmol/L)×(0.1000 L)×(14.007 mg/mmol)≈53.6 mgm(\text{N}) = C \times V_{\text{stock}} \times M_{\text{N}} = (38.272\text{ mmol/L}) \times (0.1000\text{ L}) \times (14.007\text{ mg/mmol}) \approx 53.6\text{ mg}

    You used the moles from the 25.00 mL25.00\text{ mL} titration aliquot (0.9568 mmol0.9568\text{ mmol}) instead of determining the total moles in the 100.0 mL100.0\text{ mL} stock flask (nstock=4×0.9568 mmol=3.8272 mmoln_{\text{stock}} = 4 \times 0.9568\text{ mmol} = 3.8272\text{ mmol}). This caused your final mass to be exactly a factor of 4 too low.

  3. Step 3

    The negative Benedict's test indicates the absence of reducing sugars in the protein hydrolysate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the 1:11:1 stoichiometry between hydronium ions liberated in the Formol titration and sodium hydroxide.

You calculated the molar concentration of titratable free amino groups in part (a) accurately.

You correctly related a negative Benedict's test result to the absence of reducing carbohydrates.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Aliquot-to-Stock Volume Scaling Omission

You accidentally substituted the moles consumed during the titration of the 25.00 mL25.00\text{ mL} aliquot directly into the mass equation for the 100.0 mL100.0\text{ mL} stock volume.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the quantity of analyte titrated in an analytical aliquot with the total analyte present in the whole stock solution, omitting the aliquot dilution factor VstockValiquot\frac{V_{\text{stock}}}{V_{\text{aliquot}}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Stock vs. Aliquot Verification
  • An aliquot is only a fraction of the stock solution: nstock=C×Vstock=naliquot×(VstockValiquot)n_{\text{stock}} = C \times V_{\text{stock}} = n_{\text{aliquot}} \times \left(\frac{V_{\text{stock}}}{V_{\text{aliquot}}}\right).

  • Whenever a question specifies a stock volume different from the titration volume, explicitly calculate nstockn_{\text{stock}} before converting to mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total moles of nitrogen in 100.0 mL100.0\text{ mL} stock: nN, stock=[-NH2]×Vstock=38.272 mmol/L×0.1000 L=3.8272 mmoln_{\text{N, stock}} = [\text{-NH}_2] \times V_{\text{stock}} = 38.272\text{ mmol/L} \times 0.1000\text{ L} = 3.8272\text{ mmol}.

  2. Convert moles to mass using nitrogen's atomic weight: mN=3.8272 mmol×14.007 mg/mmol=53.608 mg≈53.6 mgm_{\text{N}} = 3.8272\text{ mmol} \times 14.007\text{ mg/mmol} = 53.608\text{ mg} \approx 53.6\text{ mg}.

Final answer

(a) 38.3 mmol/L38.3\text{ mmol/L}; (b) 53.6 mg53.6\text{ mg}; (c) Absence of reducing sugars/carbohydrates.

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate problem statements by circling aliquot volume (VtitratedV_{\text{titrated}}) and stock volume (VtotalV_{\text{total}}) with distinct labels.

  • Review volumetric analysis scaling by calculating total yield from aliquot titrations.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets Benedict's reagent as a general test for proteins or peptide bonds rather than reducing carbohydrates.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(NaOH)=0.0520 mol/L×0.01840 L=0.9568 mmol  ⟹  C=0.9568 mmol0.02500 L=38.27 mmol/Ln(\text{NaOH}) = 0.0520\text{ mol/L} \times 0.01840\text{ L} = 0.9568\text{ mmol} \implies C = \frac{0.9568\text{ mmol}}{0.02500\text{ L}} = 38.27\text{ mmol/L}

  2. Step 2

    n(N) in 100 mL=0.03827 mol/L×0.1000 L=0.003827 mol  ⟹  m(N)=0.003827 mol×14.007 g/mol=53.61 mgn(\text{N})\text{ in } 100\text{ mL} = 0.03827\text{ mol/L} \times 0.1000\text{ L} = 0.003827\text{ mol} \implies m(\text{N}) = 0.003827\text{ mol} \times 14.007\text{ g/mol} = 53.61\text{ mg}

  3. Step 3

    The negative Benedict's test indicates that no intact proteins or peptide bonds are present.

    Correct

    The negative Benedict's test confirms the absence of reducing carbohydrates (such as lactose or free monosaccharides), showing that the hydrolysate is free of carbohydrate contamination.

    Benedict's reagent detects reducing sugars with free aldehyde or α\alpha-hydroxy ketone groups, not intact proteins or peptide bonds. A test that identifies peptide bonds is the Biuret test.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the stoichiometric ratio between NaOH\ce{NaOH} and liberated protons in the formol titration.

You accurately scaled the concentration to a 100.0 mL100.0\text{ mL} volume and correctly converted moles of nitrogen into milligrams.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reagent specificity confusion (Biuret vs. Benedict's test)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated Benedict's reagent with protein and peptide detection rather than carbohydrate reducing sugars. Both Benedict's and Biuret reagents contain alkaline copper(II) ions, which frequently leads to confusing the two assays.

REASONING PATH
Your ACEpath teacher’s suggested approach
Benedict's Test Target
  • Benedict's reagent contains CuX2+\ce{Cu^2+} complexed with citrate and detects reducing sugars (carbohydrates) by forming a brick-red CuX2O\ce{Cu2O} precipitate upon heating.

  • Always categorize Benedict's test under carbohydrate functional group detection (aldehydes/hemiacetals), not protein detection.

Protein and Peptide Detection
  • The Biuret test detects peptide bonds through chelation with CuX2+\ce{Cu^2+} (turning purple), while the Bradford assay uses Coomassie Brilliant Blue G-250 to detect proteins.

  • When asked about protein presence or backbone integrity, look to Biuret or Bradford assays rather than Benedict's.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that Benedict's solution reacts specifically with reducing sugars containing free or hemiacetal aldehyde/ketone groups.

  2. Note that whey protein hydrolysates originate from milk, which contains lactose (a reducing disaccharide).

  3. Conclude that the absence of a red CuX2O\ce{Cu2O} precipitate indicates no reducing carbohydrates are present in the sample.

Final answer

(a) 38.3 mmol/L38.3\text{ mmol/L}; (b) 53.6 mg53.6\text{ mg}; (c) The negative Benedict's test indicates the absence of reducing carbohydrates (free monosaccharides or reducing sugars like lactose), confirming the sample is free from carbohydrate contamination.

NEXT STEPS
Final Takeaways from Your Teacher
  • Create a summary table comparing common qualitative biochemical reagents (Benedict's, Biuret, Iodine, Bradford, and Ninhydrin) by their target macromolecule and observable positive outcome.

  • Review the distinction between copper-based carbohydrate tests (Benedict's, Fehling's) and copper-based protein tests (Biuret).

OverviewACEpath Teacher's Diagnosis

03 The student divides the number of millimoles by the titration volume of NaOH rather than the aliquot volume of the hydrolysate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(NaOH)=0.0520 M×0.01840 L=0.9568 mmoln(\text{NaOH}) = 0.0520\text{ M} \times 0.01840\text{ L} = 0.9568\text{ mmol}

  2. Step 2

    C=0.9568 mmol0.01840 L=52.00 mmol/LC = \frac{0.9568\text{ mmol}}{0.01840\text{ L}} = 52.00\text{ mmol/L}

    Correct

    [−NHX2]=nNaOHValiquot=0.9568 mmol0.02500 L=38.3 mmol/L[\ce{-NH2}] = \frac{n_{\ce{NaOH}}}{V_{\text{aliquot}}} = \frac{0.9568\text{ mmol}}{0.02500\text{ L}} = 38.3\text{ mmol/L}

    You divided by the titrant volume of NaOH\text{NaOH} (18.40 mL18.40\text{ mL}) instead of the sample aliquot volume of hydrolysate (25.00 mL25.00\text{ mL}). Dividing by the titrant volume simply recalculated the molarity of your standard base solution.

  3. Step 3

    n(N) in 100 mL=0.05200 mol/L×0.1000 L=0.005200 mol  ⟹  m(N)=0.005200 mol×14.007 g/mol=72.84 mgn(\text{N}) \text{ in } 100\text{ mL} = 0.05200\text{ mol/L} \times 0.1000\text{ L} = 0.005200\text{ mol} \implies m(\text{N}) = 0.005200\text{ mol} \times 14.007\text{ g/mol} = 72.84\text{ mg}

    Correct

    nN=(38.272 mmol/L)⋅(0.1000 L)=3.8272 mmol  ⟹  mN=3.8272 mmol⋅14.007 mg/mmol=53.6 mgn_{\ce{N}} = (38.272\text{ mmol/L}) \cdot (0.1000\text{ L}) = 3.8272\text{ mmol} \implies m_{\ce{N}} = 3.8272\text{ mmol} \cdot 14.007\text{ mg/mmol} = 53.6\text{ mg}

    Your calculation method for total nitrogen mass was completely sound, but the numerical answer was affected by the incorrect concentration carried over from part (a).

  4. Step 4

    The negative Benedict's test shows that reducing sugars are absent from the sample.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the molar amount of standard titrant consumed with complete precision.

You correctly applied the 1:11:1 stoichiometric relationship between liberated amino groups and elemental nitrogen.

You accurately identified that Benedict's test specifically detects reducing carbohydrates.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Titration Volume Confusion

Dividing the analyte moles by the volume of titrant delivered from the buret rather than by the volume of analyte pipetted into the flask.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the titrant delivery volume (VtitrantV_{\text{titrant}}) with the sample analyte volume (VanalyteV_{\text{analyte}}) when applying the concentration formula C=nVC = \frac{n}{V}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Sample vs. Titrant
  • The concentration of an unknown analyte is [Analyte]=nanalyteVanalyte aliquot[\text{Analyte}] = \frac{n_{\text{analyte}}}{V_{\text{analyte aliquot}}}.

  • Always circle and label the analyte aliquot volume (VsampleV_{\text{sample}}) separately from the buret reading (VtitrantV_{\text{titrant}}) before calculating concentration.

Sanity Check on Calculated Concentration
  • Dividing moles of titrant by the volume of titrant merely reproduces the original titrant concentration: Mtitrant⋅VtitrantVtitrant=Mtitrant\frac{M_{\text{titrant}} \cdot V_{\text{titrant}}}{V_{\text{titrant}}} = M_{\text{titrant}}.

  • Notice if your calculated analyte concentration is identical to the titrant concentration (0.0520 M0.0520\text{ M}). If it is, you divided by the wrong volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. [−NHX2]=nNaOHValiquot=0.9568 mmol0.02500 L=38.272 mmol/L≈38.3 mmol/L[\ce{-NH2}] = \frac{n_{\ce{NaOH}}}{V_{\text{aliquot}}} = \frac{0.9568\text{ mmol}}{0.02500\text{ L}} = 38.272\text{ mmol/L} \approx 38.3\text{ mmol/L}

  2. nN=[−NHX2]⋅Vstock=(38.272 mmol/L)⋅(0.1000 L)=3.8272 mmoln_{\ce{N}} = [\ce{-NH2}] \cdot V_{\text{stock}} = (38.272\text{ mmol/L}) \cdot (0.1000\text{ L}) = 3.8272\text{ mmol}

  3. mN=nN⋅14.007 mg/mmol=3.8272 mmol⋅14.007 mg/mmol=53.6 mgm_{\ce{N}} = n_{\ce{N}} \cdot 14.007\text{ mg/mmol} = 3.8272\text{ mmol} \cdot 14.007\text{ mg/mmol} = 53.6\text{ mg}

Final answer

(a) 38.3 mmol/L38.3\text{ mmol/L}; (b) 53.6 mg53.6\text{ mg}; (c) Absence of reducing carbohydrates (sugars)

NEXT STEPS
Final Takeaways from Your Teacher
  • In titration problems, write explicit subscripts on every volume term, such as VsampleV_{\text{sample}} and VNaOHV_{\text{NaOH}}, to prevent mixing them up.

  • Perform a quick dimensional sanity check: verify that your calculated concentration does not trivially match the concentration of your titrant.

Lock it in

Similar question

01

A 20.00 mL20.00\text{ mL} aliquot taken from a 200.0 mL200.0\text{ mL} volumetric flask of hydrolyzed soy protein requires 14.50 mL14.50\text{ mL} of 0.0400 M NaOH0.0400\text{ M }\ce{NaOH} in a Formol titration. Calculate the total mass of liberated amino nitrogen (atomic weight of N=14.01 g/mol\ce{N} = 14.01\text{ g/mol}) in the entire 200.0 mL200.0\text{ mL} flask.

Answer

81.3 mg81.3\text{ mg}. Key steps: naliquot=0.01450 L×0.0400 mol/L=0.580 mmoln_{\text{aliquot}} = 0.01450\text{ L} \times 0.0400\text{ mol/L} = 0.580\text{ mmol}. Scaling factor =200.0 mL20.00 mL=10= \frac{200.0\text{ mL}}{20.00\text{ mL}} = 10. Total nstock=5.80 mmoln_{\text{stock}} = 5.80\text{ mmol}. Mass m=5.80 mmol×14.01 mg/mmol=81.26 mg≈81.3 mgm = 5.80\text{ mmol} \times 14.01\text{ mg/mmol} = 81.26\text{ mg} \approx 81.3\text{ mg}.

02

A 25.00 mL25.00\text{ mL} sample of an amino acid solution is diluted to 250.0 mL250.0\text{ mL} in a volumetric flask. A 50.00 mL50.00\text{ mL} aliquot of this diluted solution requires 12.00 mL12.00\text{ mL} of 0.1000 M NaOH0.1000\text{ M }\ce{NaOH} for neutralization after reaction with formaldehyde. Determine the concentration of amino acid in the original 25.00 mL25.00\text{ mL} sample in mol/L\text{mol/L}.

Answer

0.240 mol/L0.240\text{ mol/L}. Key steps: naliquot=0.01200 L×0.1000 mol/L=1.200 mmoln_{\text{aliquot}} = 0.01200\text{ L} \times 0.1000\text{ mol/L} = 1.200\text{ mmol}. Diluted flask concentration =1.200 mmol50.00 mL=0.0240 M= \frac{1.200\text{ mmol}}{50.00\text{ mL}} = 0.0240\text{ M}. Dilution factor =250.0 mL25.00 mL=10= \frac{250.0\text{ mL}}{25.00\text{ mL}} = 10. Original concentration =0.0240 M×10=0.240 M= 0.0240\text{ M} \times 10 = 0.240\text{ M}.

03

A chemist dissolves 1.850 g1.850\text{ g} of an impure oligopeptide powder into 100.0 mL100.0\text{ mL} of water. A 15.00 mL15.00\text{ mL} aliquot consumes 18.75 mL18.75\text{ mL} of 0.0200 M NaOH0.0200\text{ M }\ce{NaOH} via Formol titration. If the peptide contains 16.0%16.0\% nitrogen by mass and completely hydrolyzes so that each nitrogen atom corresponds to one titratable amino group, calculate the mass percentage purity of the peptide in the original powder.

Answer

18.9%18.9\%. Key steps: naliquot=0.01875 L×0.0200 mol/L=0.375 mmoln_{\text{aliquot}} = 0.01875\text{ L} \times 0.0200\text{ mol/L} = 0.375\text{ mmol}. Scaling to stock: nstock=0.375 mmol×100.0 mL15.00 mL=2.50 mmoln_{\text{stock}} = 0.375\text{ mmol} \times \frac{100.0\text{ mL}}{15.00\text{ mL}} = 2.50\text{ mmol}. Mass of N=2.50 mmol×14.01 mg/mmol=35.025 mg=0.035025 g\ce{N} = 2.50\text{ mmol} \times 14.01\text{ mg/mmol} = 35.025\text{ mg} = 0.035025\text{ g}. Mass of pure peptide =0.035025 g0.160=0.2189 g= \frac{0.035025\text{ g}}{0.160} = 0.2189\text{ g}. Purity =0.2189 g1.850 g×100%≈11.8%= \frac{0.2189\text{ g}}{1.850\text{ g}} \times 100\% \approx 11.8\%.

Loading workspace…