Resources

In an ultra-high vacuum (UHV) chamber designed for surface physics experiments, the pressure is reduced to an extreme asymptotic limit of 1.20×10−9 torr1.20 \times 10^{-9}\text{ torr} at a regulated laboratory temperature of 298 K298\text{ K}. Calculate the number density of residual gas molecules per cubic centimeter (molecules/cm3\text{molecules/cm}^3) remaining in the chamber at this extreme low-pressure threshold. (1 atm=760 torr1\text{ atm} = 760\text{ torr}, R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}), NA=6.022×1023 molecules/molN_{\text{A}} = 6.022 \times 10^{23}\text{ molecules/mol}).

Answer and steps

Final answer

3.88×107 molecules/cm33.88 \times 10^7\text{ molecules/cm}^3

Steps

01

Convert pressure to atmospheres (atm\text{atm})

To find the number density of gas molecules per cubic centimeter, we relate the macroscopic gas variables to the number of molecules using the ideal gas law, PV=nRTPV = nRT.

The ideal gas constant is given in units involving atmospheres, so we first convert the pressure from torr\text{torr} to atm\text{atm}:

P=1.20×10−9 torr760 torr/atm≈1.5789×10−12 atmP = \frac{1.20 \times 10^{-9}\text{ torr}}{760\text{ torr/atm}} \approx 1.5789 \times 10^{-12}\text{ atm}

02

Determine molar density (mol/L\text{mol/L})

Rearranging the ideal gas equation PV=nRTPV = nRT gives the molar concentration (moles per unit volume):

nV=PRT\frac{n}{V} = \frac{P}{RT}

Substitute the known values (P=1.5789×10−12 atmP = 1.5789 \times 10^{-12}\text{ atm}, R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}), and T=298 KT = 298\text{ K}):

nV=1.5789×10−12 atm(0.08206 L⋅atm/(mol⋅K))(298 K)\frac{n}{V} = \frac{1.5789 \times 10^{-12}\text{ atm}}{(0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}))(298\text{ K})}

nV=1.5789×10−1224.4539 mol/L≈6.4566×10−14 mol/L\frac{n}{V} = \frac{1.5789 \times 10^{-12}}{24.4539}\text{ mol/L} \approx 6.4566 \times 10^{-14}\text{ mol/L}

03

Convert moles to molecules

Multiply the molar density by Avogadro's number (NA=6.022×1023 molecules/molN_{\text{A}} = 6.022 \times 10^{23}\text{ molecules/mol}) to find the number of molecules per liter:

DensityL=(6.4566×10−14 mol/L)×(6.022×1023 molecules/mol)≈3.888×1010 molecules/L\text{Density}_{\text{L}} = \left(6.4566 \times 10^{-14}\text{ mol/L}\right) \times \left(6.022 \times 10^{23}\text{ molecules/mol}\right) \approx 3.888 \times 10^{10}\text{ molecules/L}

04

Convert volume from liters to cubic centimeters

Since 1 L=1000 cm31\text{ L} = 1000\text{ cm}^3 (1 cm3=10−3 L1\text{ cm}^3 = 10^{-3}\text{ L}):

Number density=3.888×1010 molecules/L1000 cm3/L≈3.88×107 molecules/cm3\text{Number density} = \frac{3.888 \times 10^{10}\text{ molecules/L}}{1000\text{ cm}^3/\text{L}} \approx 3.88 \times 10^7\text{ molecules/cm}^3

Common Pitfall: When converting from liters to cubic centimeters, remember that 1 cm31\text{ cm}^3 is one-thousandth of a liter, so the number of particles in 1 cm31\text{ cm}^3 must be 10310^3 times smaller than in 1 L1\text{ L}, requiring division by 10001000.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert liters to cubic centimeters, reporting the number density per liter instead of per cubic centimeter.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=1.20×10−9760=1.58×10−12 atmP = \frac{1.20 \times 10^{-9}}{760} = 1.58 \times 10^{-12}\text{ atm}

  2. Step 2

    nV=PRT=1.58×10−120.08206×298=6.46×10−14 mol/L\frac{n}{V} = \frac{P}{RT} = \frac{1.58 \times 10^{-12}}{0.08206 \times 298} = 6.46 \times 10^{-14}\text{ mol/L}

  3. Step 3

    NV=(6.46×10−14 mol/L)×(6.022×1023 molecules/mol)\frac{N}{V} = (6.46 \times 10^{-14}\text{ mol/L}) \times (6.022 \times 10^{23}\text{ molecules/mol})

  4. Step 4

    NV=3.89×1010 molecules/cm3\frac{N}{V} = 3.89 \times 10^{10}\text{ molecules/cm}^3

    Correct

    NVcm3=3.89×1010 molecules/L1000 cm3/L≈3.88×107 molecules/cm3\frac{N}{V_{\text{cm}^3}} = \frac{3.89 \times 10^{10}\text{ molecules/L}}{1000\text{ cm}^3/\text{L}} \approx 3.88 \times 10^7\text{ molecules/cm}^3

    You carried over the numerical value in molecules/L\text{molecules/L} and relabeled it as molecules/cm3\text{molecules/cm}^3. Because 1 L=1000 cm31\text{ L} = 1000\text{ cm}^3, the density in one cubic centimeter must be 10001000 times smaller, requiring you to divide by 1000 cm3/L1000\text{ cm}^3/\text{L}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the given pressure from torr to atmospheres.

You accurately rearranged the ideal gas law to calculate molar density.

You correctly applied Avogadro's number to convert moles to molecules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion in the denominator (L to cm³)

You accurately evaluated the number of molecules per liter (3.89×10103.89 \times 10^{10}), but directly wrote the unit as molecules/cm3\text{molecules/cm}^3 without performing the volume conversion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating unit renaming with dimensional analysis when converting compound units containing a denominator volume (1/L1/\text{L} vs. 1/cm31/\text{cm}^3). Because 1 cm3=10−3 L1\text{ cm}^3 = 10^{-3}\text{ L}, converting per liter to per cubic centimeter requires dividing by 10310^3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator Unit Scaling Check
  • When converting a density quantity with volume in the denominator, 1 L=1000 cm31\text{ L} = 1000\text{ cm}^3, so 1L=11000 cm3=10−3 cm−3\frac{1}{\text{L}} = \frac{1}{1000\text{ cm}^3} = 10^{-3}\text{ cm}^{-3}.

  • Always write the conversion factor explicitly as ×(1 L1000 cm3)\times \left(\frac{1\text{ L}}{1000\text{ cm}^3}\right) so the liter units cancel out in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert liters to cubic centimeters using the relation 1 L=1000 cm31\text{ L} = 1000\text{ cm}^3:

  2. Number density=3.888×1010 molecules1 L×1 L1000 cm3=3.888×107 molecules/cm3\text{Number density} = \frac{3.888 \times 10^{10}\text{ molecules}}{1\text{ L}} \times \frac{1\text{ L}}{1000\text{ cm}^3} = 3.888 \times 10^7\text{ molecules/cm}^3

  3. Round to three significant figures.

Final answer

3.88×107 molecules/cm33.88 \times 10^7\text{ molecules/cm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out dimensional analysis factors explicitly with cancelling units rather than swapping unit labels at the final step.

  • Perform a sanity check on intensive properties: a smaller volume (like 1 cm31\text{ cm}^3 compared to 1 L1\text{ L}) must contain fewer particles, so the value must decrease.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the pressure conversion factor by multiplying the pressure in torr by 760 instead of dividing by 760.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=1.20×10−9×760=9.12×10−7 atmP = 1.20 \times 10^{-9} \times 760 = 9.12 \times 10^{-7}\text{ atm}

    Correct

    P=1.20×10−9 torr760 torr/atm≈1.58×10−12 atmP = \frac{1.20 \times 10^{-9}\text{ torr}}{760\text{ torr/atm}} \approx 1.58 \times 10^{-12}\text{ atm}

    Since 1 atm=760 torr1\text{ atm} = 760\text{ torr}, converting from a smaller unit (torr\text{torr}) to a larger unit (atm\text{atm}) requires dividing by 760760, not multiplying.

  2. Step 2

    nV=9.12×10−70.08206×298=3.73×10−8 mol/L\frac{n}{V} = \frac{9.12 \times 10^{-7}}{0.08206 \times 298} = 3.73 \times 10^{-8}\text{ mol/L}

    Correct

    nV=1.58×10−12 atm(0.08206 L⋅atm/(mol⋅K))(298 K)≈6.46×10−14 mol/L\frac{n}{V} = \frac{1.58 \times 10^{-12}\text{ atm}}{(0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}))(298\text{ K})} \approx 6.46 \times 10^{-14}\text{ mol/L}

    Your application of the ideal gas law nV=PRT\frac{n}{V} = \frac{P}{RT} was carried out correctly, but the numerical result was affected by the initial pressure conversion error.

  3. Step 3

    nV=3.73×10−81000=3.73×10−11 mol/cm3\frac{n}{V} = \frac{3.73 \times 10^{-8}}{1000} = 3.73 \times 10^{-11}\text{ mol/cm}^3

    Correct

    nV=6.46×10−14 mol/L1000 cm3/L≈6.46×10−17 mol/cm3\frac{n}{V} = \frac{6.46 \times 10^{-14}\text{ mol/L}}{1000\text{ cm}^3/\text{L}} \approx 6.46 \times 10^{-17}\text{ mol/cm}^3

    You correctly recognized that 1 L=1000 cm31\text{ L} = 1000\text{ cm}^3 and divided by 10001000, though the value carried over the earlier pressure mistake.

  4. Step 4

    NV=(3.73×10−11 mol/cm3)×(6.022×1023 molecules/mol)=2.25×1013 molecules/cm3\frac{N}{V} = (3.73 \times 10^{-11}\text{ mol/cm}^3) \times (6.022 \times 10^{23}\text{ molecules/mol}) = 2.25 \times 10^{13}\text{ molecules/cm}^3

    Correct

    NV=(6.46×10−17 mol/cm3)×(6.022×1023 molecules/mol)≈3.88×107 molecules/cm3\frac{N}{V} = (6.46 \times 10^{-17}\text{ mol/cm}^3) \times (6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.88 \times 10^7\text{ molecules/cm}^3

    You correctly multiplied by Avogadro's constant to reach the final number density, but the result reflects the propagated pressure error from step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the molar concentration nV=PRT\frac{n}{V} = \frac{P}{RT} from the ideal gas equation.

You correctly converted volume concentration from liters to cubic centimeters by dividing by 10001000.

You correctly applied Avogadro's number to convert moles to molecules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted pressure unit conversion

Multiplying by 760760 instead of dividing by 760760 when converting pressure from torr\text{torr} to atm\text{atm}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusion over dimensional analysis and conversion factors when transitioning from a smaller pressure unit (torr\text{torr}) to a larger reference unit (atm\text{atm}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Conversion Direction
  • To convert from a smaller unit to a larger unit, divide by the conversion ratio: P(atm)=P(torr)760 torr/atmP(\text{atm}) = \frac{P(\text{torr})}{760\text{ torr/atm}}.

  • Write down explicit conversion factors with canceling units: (1.20×10−9 torr)×(1 atm760 torr)(1.20 \times 10^{-9}\text{ torr}) \times \left(\frac{1\text{ atm}}{760\text{ torr}}\right) to ensure units cancel properly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert pressure using division: P=1.20×10−9 torr760 torr/atm≈1.579×10−12 atmP = \frac{1.20 \times 10^{-9}\text{ torr}}{760\text{ torr/atm}} \approx 1.579 \times 10^{-12}\text{ atm}.

  2. Calculate molar density in mol/L\text{mol/L}: nV=1.579×10−12 atm(0.08206 L⋅atm/(mol⋅K))(298 K)≈6.457×10−14 mol/L\frac{n}{V} = \frac{1.579 \times 10^{-12}\text{ atm}}{(0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}))(298\text{ K})} \approx 6.457 \times 10^{-14}\text{ mol/L}.

  3. Convert liters to cubic centimeters: nV=6.457×10−14 mol/L1000 cm3/L≈6.457×10−17 mol/cm3\frac{n}{V} = \frac{6.457 \times 10^{-14}\text{ mol/L}}{1000\text{ cm}^3/\text{L}} \approx 6.457 \times 10^{-17}\text{ mol/cm}^3.

  4. Multiply by Avogadro's number: NV=(6.457×10−17 mol/cm3)×(6.022×1023 molecules/mol)≈3.88×107 molecules/cm3\frac{N}{V} = (6.457 \times 10^{-17}\text{ mol/cm}^3) \times (6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.88 \times 10^7\text{ molecules/cm}^3.

Final answer

3.88×107 molecules/cm33.88 \times 10^7\text{ molecules/cm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out dimensional analysis unit fractions to verify that unwanted units cancel out.

  • Perform a quick magnitude sanity check: pressure in atmospheres should always be numerically smaller than pressure in torr\text{torr} because 1 atm1\text{ atm} contains many torr\text{torr}.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by 1000 instead of dividing by 1000 when converting liters to cubic centimeters.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=1.20×10−9760=1.58×10−12 atmP = \frac{1.20 \times 10^{-9}}{760} = 1.58 \times 10^{-12}\text{ atm}

  2. Step 2

    nV=1.58×10−120.08206×298=6.46×10−14 mol/L\frac{n}{V} = \frac{1.58 \times 10^{-12}}{0.08206 \times 298} = 6.46 \times 10^{-14}\text{ mol/L}

  3. Step 3

    nV=6.46×10−14×1000=6.46×10−11 mol/cm3\frac{n}{V} = 6.46 \times 10^{-14} \times 1000 = 6.46 \times 10^{-11}\text{ mol/cm}^3

    Correct

    nV=6.46×10−14 mol/L1000 cm3/L=6.46×10−17 mol/cm3\frac{n}{V} = \frac{6.46 \times 10^{-14}\text{ mol/L}}{1000\text{ cm}^3/\text{L}} = 6.46 \times 10^{-17}\text{ mol/cm}^3

    Because 1 L=1000 cm31\text{ L} = 1000\text{ cm}^3 sits in the denominator, a single cubic centimeter holds one-thousandth of the moles present in a full liter. You multiplied by 10001000 instead of dividing by 10001000.

  4. Step 4

    NV=(6.46×10−11 mol/cm3)×(6.022×1023 molecules/mol)=3.89×1013 molecules/cm3\frac{N}{V} = (6.46 \times 10^{-11}\text{ mol/cm}^3) \times (6.022 \times 10^{23}\text{ molecules/mol}) = 3.89 \times 10^{13}\text{ molecules/cm}^3

    Correct

    NV=(6.46×10−17 mol/cm3)×(6.022×1023 molecules/mol)≈3.88×107 molecules/cm3\frac{N}{V} = (6.46 \times 10^{-17}\text{ mol/cm}^3) \times (6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.88 \times 10^7\text{ molecules/cm}^3

    Your multiplication by Avogadro's number followed correct reasoning, but the result inherited the factor-of-10610^6 discrepancy from the conversion error in step c.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the pressure from torr to atmospheres using the conversion factor 760 torr/atm760\text{ torr/atm}.

You correctly applied the ideal gas equation in the form nV=PRT\frac{n}{V} = \frac{P}{RT} to find the molar concentration in moles per liter.

You recognized that multiplying molar density by Avogadro's constant yields molecular number density.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator Unit Conversion Error

You multiplied by 10001000 when converting per-liter concentration into per-cubic-centimeter concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When converting a composite unit with volume in the denominator, such as mol/L\text{mol/L}, replacing 1 L1\text{ L} with 1000 cm31000\text{ cm}^3 requires placing 10001000 in the denominator (dividing by 10001000). Multiplying by 10001000 incorrectly implies that a smaller volume contains more particles than a larger volume.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator Conversion Check
  • If unit BB is in the denominator and 1 A=k⋅B1\text{ A} = k\cdot B, then 1A=1k B\frac{1}{\text{A}} = \frac{1}{k\text{ B}}, requiring division by kk.

  • Write the unit conversion explicitly with canceling units: molL×1 L1000 cm3\frac{\text{mol}}{\text{L}} \times \frac{1\text{ L}}{1000\text{ cm}^3}.

Physical Sanity Check
  • A smaller volume of the same uniform gas must contain fewer particles than a larger volume.

  • Check whether your calculated quantity for 1 cm31\text{ cm}^3 is smaller than your quantity for 1 L1\text{ L} (1000 cm31000\text{ cm}^3).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the unit conversion explicitly: nV=(6.46×10−14 mol/L)×(1 L1000 cm3)=6.46×10−17 mol/cm3\frac{n}{V} = (6.46 \times 10^{-14}\text{ mol/L}) \times \left(\frac{1\text{ L}}{1000\text{ cm}^3}\right) = 6.46 \times 10^{-17}\text{ mol/cm}^3.

  2. Multiply by Avogadro's number: NV=(6.46×10−17 mol/cm3)×(6.022×1023 molecules/mol)=3.88×107 molecules/cm3\frac{N}{V} = (6.46 \times 10^{-17}\text{ mol/cm}^3) \times (6.022 \times 10^{23}\text{ molecules/mol}) = 3.88 \times 10^7\text{ molecules/cm}^3.

Final answer

3.88×107 molecules/cm33.88 \times 10^7\text{ molecules/cm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out dimensional analysis factors explicitly with units in fractions so denominator terms cancel properly.

  • Perform a quick physical plausibility check: ensure a smaller sub-volume holds fewer molecules than the total volume.

Lock it in

Similar question

01

A sample of nitrogen gas has a molar concentration of 4.10×10−5 mol/L4.10 \times 10^{-5}\text{ mol/L}. Calculate its number density in molecules/cm3\text{molecules/cm}^3. (NA=6.022×1023 molecules/molN_{\text{A}} = 6.022 \times 10^{23}\text{ molecules/mol}).

Answer

2.47×1016 molecules/cm32.47 \times 10^{16}\text{ molecules/cm}^3. Multiply by NAN_{\text{A}} to find density in liters: (4.10×10−5 mol/L)(6.022×1023 molecules/mol)=2.469×1019 molecules/L(4.10 \times 10^{-5}\text{ mol/L})(6.022 \times 10^{23}\text{ molecules/mol}) = 2.469 \times 10^{19}\text{ molecules/L}. Divide by 1000 cm3/L1000\text{ cm}^3/\text{L} to get 2.47×1016 molecules/cm32.47 \times 10^{16}\text{ molecules/cm}^3.

02

An electron beam apparatus operates at T=300 KT = 300\text{ K} and P=2.50×10−6 torrP = 2.50 \times 10^{-6}\text{ torr}. Find the number density of gas molecules in molecules/cm3\text{molecules/cm}^3. (1 atm=760 torr1\text{ atm} = 760\text{ torr}, R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}), NA=6.022×1023 molecules/molN_{\text{A}} = 6.022 \times 10^{23}\text{ molecules/mol}).

Answer

8.04×1010 molecules/cm38.04 \times 10^{10}\text{ molecules/cm}^3. Convert pressure: P=(2.50×10−6)/760=3.289×10−9 atmP = (2.50 \times 10^{-6})/760 = 3.289 \times 10^{-9}\text{ atm}. Find molar density: n/V=P/(RT)=(3.289×10−9)/(0.08206×300)=1.336×10−10 mol/Ln/V = P/(RT) = (3.289 \times 10^{-9})/(0.08206 \times 300) = 1.336 \times 10^{-10}\text{ mol/L}. Convert to molecules: (1.336×10−10)(6.022×1023)=8.046×1013 molecules/L(1.336 \times 10^{-10})(6.022 \times 10^{23}) = 8.046 \times 10^{13}\text{ molecules/L}. Divide by 1000 cm3/L1000\text{ cm}^3/\text{L} to obtain 8.04×1010 molecules/cm38.04 \times 10^{10}\text{ molecules/cm}^3.

03

In interstellar space, the particle density is 1.00 atom/cm31.00\text{ atom/cm}^3 at an effective temperature of 50.0 K50.0\text{ K}. Calculate the equivalent gas pressure in torr. (1 atm=760 torr1\text{ atm} = 760\text{ torr}, R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}), NA=6.022×1023 molecules/molN_{\text{A}} = 6.022 \times 10^{23}\text{ molecules/mol}).

Answer

3.88×10−19 torr3.88 \times 10^{-19}\text{ torr}. Convert volume density: 1.00 atom/cm3×1000 cm3/L=1000 atoms/L1.00\text{ atom/cm}^3 \times 1000\text{ cm}^3/\text{L} = 1000\text{ atoms/L}. Convert to molar concentration: n/V=1000/(6.022×1023)=1.661×10−21 mol/Ln/V = 1000/(6.022 \times 10^{23}) = 1.661 \times 10^{-21}\text{ mol/L}. Calculate pressure: P=(n/V)RT=(1.661×10−21)(0.08206)(50.0)=6.813×10−21 atmP = (n/V)RT = (1.661 \times 10^{-21})(0.08206)(50.0) = 6.813 \times 10^{-21}\text{ atm}. Convert to torr: P=(6.813×10−21)×760=5.18×10−18 torrP = (6.813 \times 10^{-21}) \times 760 = 5.18 \times 10^{-18}\text{ torr} (or using P=nkBTP = n k_B T). Note: (1.661×10−21)(0.08206)(50)×760=5.18×10−18 torr(1.661 \times 10^{-21})(0.08206)(50) \times 760 = 5.18 \times 10^{-18}\text{ torr}.

Loading workspace…