Resources

A rigid, closed steel cylinder contains a sample of argon gas at an initial temperature of 22.0∘C22.0^\circ\text{C} and an initial pressure of 745 torr745\text{ torr}. Heat is added to the container until the internal pressure reaches 1150 torr1150\text{ torr}. Assuming the volume remains strictly constant, calculate the final temperature of the gas in degrees Celsius (∘C^\circ\text{C}).

Answer and steps

Final answer

182∘C182^\circ\text{C}

Steps

01

Identify the given values and applicable gas law

The container is a rigid, closed cylinder, which means both the volume (VV) and the amount of gas (nn) remain constant. According to Gay-Lussac's Law, the pressure of a gas is directly proportional to its absolute temperature in Kelvin when volume and moles are held constant:

P1T1=P2T2\frac{P_1}{T_1} = \frac{P_2}{T_2}

The given values are:

  • Initial pressure, P1=745 torrP_1 = 745\text{ torr}
  • Initial temperature, t1=22.0∘Ct_1 = 22.0^\circ\text{C}
  • Final pressure, P2=1150 torrP_2 = 1150\text{ torr}
02

Convert the initial temperature to Kelvin

Gas law calculations require temperature to be expressed in an absolute scale (Kelvin). A common pitfall is calculating directly in degrees Celsius, which violates the direct proportionality requirement:

T1=22.0+273.15=295.15 KT_1 = 22.0 + 273.15 = 295.15\text{ K}

03

Rearrange and solve for the final temperature (T2T_2)

Rearrange Gay-Lussac's Law to isolate T2T_2:

T2=T1⋅P2P1T_2 = T_1 \cdot \frac{P_2}{P_1}

Substitute the values:

T2=295.15 K⋅1150 torr745 torr≈455.60 KT_2 = 295.15\text{ K} \cdot \frac{1150\text{ torr}}{745\text{ torr}} \approx 455.60\text{ K}

04

Convert the final temperature back to degrees Celsius

Subtract 273.15273.15 to convert the temperature back to Celsius:

t2=455.60−273.15=182.45∘C≈182∘Ct_2 = 455.60 - 273.15 = 182.45^\circ\text{C} \approx 182^\circ\text{C}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student fails to convert the temperature from Celsius to Kelvin, directly substituting Celsius temperatures into Gay-Lussac's law to get 34.0 °C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P1T1=P2T2  ⟹  T2=T1⋅(P2P1)\frac{P_1}{T_1} = \frac{P_2}{T_2} \implies T_2 = T_1 \cdot \left(\frac{P_2}{P_1}\right)

  2. Step 2

    T2=22.0⋅(1150745)T_2 = 22.0 \cdot \left(\frac{1150}{745}\right)

    Correct

    T2=(22.0+273.15) K⋅(1150 torr745 torr)=295.15 K⋅(1150745)T_2 = (22.0 + 273.15)\text{ K} \cdot \left(\frac{1150\text{ torr}}{745\text{ torr}}\right) = 295.15\text{ K} \cdot \left(\frac{1150}{745}\right)

    Gas laws require absolute temperature in Kelvin. You substituted 22.0∘C22.0^\circ\text{C} directly instead of converting to Kelvin by adding 273.15273.15.

  3. Step 3

    T2=34.0∘CT_2 = 34.0^\circ\text{C}

    Correct

    T2=455.6 K  ⟹  t2=455.6−273.15≈182∘CT_2 = 455.6\text{ K} \implies t_2 = 455.6 - 273.15 \approx 182^\circ\text{C}

    Your arithmetic on the substituted numbers was carried out properly, but because the initial temperature was in Celsius, the final temperature is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a rigid, closed container holds volume and amount of gas constant, which means Gay-Lussac's Law applies.

You accurately rearranged P1T1=P2T2\frac{P_1}{T_1} = \frac{P_2}{T_2} to solve for T2T_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Celsius to Kelvin conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated degrees Celsius as directly proportional to pressure, forgetting that gas laws are derived from the kinetic molecular theory where thermal energy and pressure are proportional to absolute temperature (TT in Kelvin), not relative temperature in Celsius.

REASONING PATH
Your ACEpath teacher’s suggested approach
Temperature Scale in Gas Laws
  • Always convert temperatures to Kelvin (T=t+273.15T = t + 273.15) before multiplying or dividing in any gas law equation.

  • Check that temperature has units of K\text{K} before substituting it into P1T1=P2T2\frac{P_1}{T_1} = \frac{P_2}{T_2}.

Final Unit Verification
  • If the question asks for degrees Celsius, solve for T2T_2 in Kelvin first, then subtract 273.15273.15 at the very end.

  • Convert T2 (K)→t2 (∘C)T_2\text{ (K)} \to t_2\text{ (}^\circ\text{C)} only as the final step after calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the initial temperature to Kelvin: T1=22.0+273.15=295.15 KT_1 = 22.0 + 273.15 = 295.15\text{ K}.

  2. Substitute the Kelvin temperature into your rearranged formula: T2=295.15 K⋅(1150 torr745 torr)≈455.60 KT_2 = 295.15\text{ K} \cdot \left(\frac{1150\text{ torr}}{745\text{ torr}}\right) \approx 455.60\text{ K}.

  3. Convert the final temperature back to degrees Celsius: t2=455.60−273.15≈182∘Ct_2 = 455.60 - 273.15 \approx 182^\circ\text{C}.

Final answer

182∘C182^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Whenever you see temperature given in ∘C^\circ\text{C} in a gas law problem, immediately write down its Kelvin equivalent before setting up your calculation.

  • Practice solving combined gas law problems where you convert to Kelvin at the start and back to Celsius at the end.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the pressure ratio when solving Gay-Lussac's law, multiplying by P1 / P2 instead of P2 / P1 to find a final temperature of -82.0 °C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T1=22.0+273.15=295.15 KT_1 = 22.0 + 273.15 = 295.15\text{ K}

  2. Step 2

    P1T1=P2T2  ⟹  T2=T1∗(P1P2)\frac{P_1}{T_1} = \frac{P_2}{T_2} \implies T_2 = T_1 * \left(\frac{P_1}{P_2}\right)

    Correct

    P1T1=P2T2  ⟹  T2=T1⋅(P2P1)\frac{P_1}{T_1} = \frac{P_2}{T_2} \implies T_2 = T_1 \cdot \left(\frac{P_2}{P_1}\right)

    You correctly recalled Gay-Lussac's Law, but made an algebraic error when isolating T2T_2. Cross-multiplying gives P1T2=P2T1P_1 T_2 = P_2 T_1, which divides by P1P_1 to yield T2=T1⋅(P2P1)T_2 = T_1 \cdot \left(\frac{P_2}{P_1}\right).

  3. Step 3

    T2=295.15∗(7451150)=191.2 KT_2 = 295.15 * \left(\frac{745}{1150}\right) = 191.2\text{ K}

    Correct

    T2=295.15 K⋅(1150 torr745 torr)≈455.60 KT_2 = 295.15\text{ K} \cdot \left(\frac{1150\text{ torr}}{745\text{ torr}}\right) \approx 455.60\text{ K}

    Your numerical substitution and arithmetic followed your inverted formula correctly, but the result is affected by the algebraic inversion in Step 2.

  4. Step 4

    T2=191.2−273.15=−82.0∘CT_2 = 191.2 - 273.15 = -82.0^\circ\text{C}

    Correct

    t2=455.60−273.15≈182∘Ct_2 = 455.60 - 273.15 \approx 182^\circ\text{C}

    Your method for converting back to degrees Celsius is correct, but the final value reflects the earlier formula error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the starting temperature from Celsius to Kelvin before calculating.

You selected the correct gas law relation for constant volume and amount of gas.

You correctly subtracted 273.15273.15 to express the final answer in degrees Celsius.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic isolation error (inverted ratio)

You inverted the pressure fraction P2P1\frac{P_2}{P_1} into P1P2\frac{P_1}{P_2} when rearranging Gay-Lussac's Law to isolate T2T_2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When isolating a denominator variable in a proportion ab=cd\frac{a}{b} = \frac{c}{d}, taking reciprocals or cross-multiplying first ensures that variables in the numerator and denominator are not accidentally swapped.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross-Multiplication Check
  • For any proportion AB=CD\frac{A}{B} = \frac{C}{D}, cross-multiply to obtain A⋅D=B⋅CA \cdot D = B \cdot C before isolating the unknown.

  • Multiply diagonally first: P1T2=P2T1P_1 T_2 = P_2 T_1, then divide both sides by P1P_1 to find T2=T1P2P1T_2 = T_1 \frac{P_2}{P_1}.

Physical Reality Check
  • Gay-Lussac's Law states that pressure and absolute temperature are directly proportional (P∝TP \propto T) at constant volume.

  • Check whether the trend makes physical sense: adding heat to increase pressure from 745 torr745\text{ torr} to 1150 torr1150\text{ torr} must result in a higher temperature than 22.0∘C22.0^\circ\text{C}, not a freezing −82.0∘C-82.0^\circ\text{C}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Cross-multiply the proportion: P1T2=P2T1P_1 T_2 = P_2 T_1.

  2. Divide by P1P_1 to isolate T2T_2: T2=T1⋅P2P1T_2 = T_1 \cdot \frac{P_2}{P_1}.

  3. Substitute the given values: T2=295.15 K⋅1150 torr745 torr≈455.60 KT_2 = 295.15\text{ K} \cdot \frac{1150\text{ torr}}{745\text{ torr}} \approx 455.60\text{ K}.

  4. Convert to degrees Celsius: t2=455.60−273.15=182.45∘C≈182∘Ct_2 = 455.60 - 273.15 = 182.45^\circ\text{C} \approx 182^\circ\text{C}.

Final answer

182∘C182^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice cross-multiplying proportions before isolating an unknown located in the denominator.

  • Perform a physical reasonableness check on every gas law problem: if pressure increases in a rigid container, temperature must also increase.

OverviewACEpath Teacher's Diagnosis

03 The student correctly calculates the final absolute temperature in Kelvin but forgets to convert the result back to degrees Celsius as requested, reporting 455.6 °C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T1=22.0+273.15=295.15 KT_1 = 22.0 + 273.15 = 295.15\text{ K}

  2. Step 2

    P1T1=P2T2  ⟹  T2=T1⋅(P2P1)\frac{P_1}{T_1} = \frac{P_2}{T_2} \implies T_2 = T_1 \cdot \left(\frac{P_2}{P_1}\right)

  3. Step 3

    T2=295.15⋅(1150745)=455.6 KT_2 = 295.15 \cdot \left(\frac{1150}{745}\right) = 455.6\text{ K}

  4. Step 4

    Final temperature=455.6∘C\text{Final temperature} = 455.6^\circ\text{C}

    Correct

    t2=455.6−273.15=182.45∘C≈182∘Ct_2 = 455.6 - 273.15 = 182.45^\circ\text{C} \approx 182^\circ\text{C}

    You swapped the unit label from K\text{K} to ∘C^\circ\text{C} without applying the conversion formula t=T−273.15t = T - 273.15.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the starting temperature to Kelvin before doing any gas law calculations.

You correctly identified and rearranged Gay-Lussac's Law for constant volume.

You accurately computed the intermediate final temperature in Kelvin.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion back to Celsius

You calculated the numerical value in Kelvin correctly (455.6 K455.6\text{ K}), but wrote 455.6∘C455.6^\circ\text{C} without subtracting 273.15273.15.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating temperature unit conversion as a simple label swap rather than an offset conversion where t (∘C)=T (K)−273.15t\,(^\circ\text{C}) = T\,(\text{K}) - 273.15.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Requested Units
  • Gas laws require calculations in Kelvin, but the prompt may request the final answer in Celsius.

  • Before submitting, check the question prompt for the requested unit: if Celsius is required, subtract 273.15273.15 from your Kelvin result.

Celsius vs. Kelvin Conversion
  • T (K)=t (∘C)+273.15T\,(\text{K}) = t\,(^\circ\text{C}) + 273.15 and t (∘C)=T (K)−273.15t\,(^\circ\text{C}) = T\,(\text{K}) - 273.15.

  • Never change K\text{K} to ∘C^\circ\text{C} without subtracting 273.15273.15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert from Kelvin back to Celsius using t2=T2−273.15t_2 = T_2 - 273.15.

  2. t2=455.60−273.15=182.45∘Ct_2 = 455.60 - 273.15 = 182.45^\circ\text{C}

  3. Round to three significant figures to match the initial temperature precision.

Final answer

182∘C182^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between absolute temperature (Kelvin) and Celsius.

  • Practice checking whether the question asks for temperature in K\text{K} or ∘C^\circ\text{C} at the very beginning and at the final step.

Lock it in

Similar question

01

A rigid metal aerosol can contains gas at 25.0∘C25.0^\circ\text{C} and 1.20 atm1.20\text{ atm}. If the can is left in sunlight and warms to 75.0∘C75.0^\circ\text{C}, what is the new pressure inside the can in atmospheres?

Answer

1.40 atm1.40\text{ atm}. Convert temperatures to Kelvin: T1=25.0+273.15=298.15 KT_1 = 25.0 + 273.15 = 298.15\text{ K}, T2=75.0+273.15=348.15 KT_2 = 75.0 + 273.15 = 348.15\text{ K}. Using Gay-Lussac's Law: P2=P1⋅T2T1=1.20 atm⋅348.15 K298.15 K≈1.40 atmP_2 = P_1 \cdot \frac{T_2}{T_1} = 1.20\text{ atm} \cdot \frac{348.15\text{ K}}{298.15\text{ K}} \approx 1.40\text{ atm}.

02

A constant-volume pressure cooker is pressurized to 150 kPa150\text{ kPa} at 20.0∘C20.0^\circ\text{C}. Heating increases the internal pressure to 225 kPa225\text{ kPa}. Calculate the final temperature of the steam inside in degrees Celsius (∘C^\circ\text{C}).

Answer

167∘C167^\circ\text{C}. Convert initial temperature to Kelvin: T1=20.0+273.15=293.15 KT_1 = 20.0 + 273.15 = 293.15\text{ K}. Solve for final temperature: T2=T1⋅P2P1=293.15 K⋅225 kPa150 kPa=439.73 KT_2 = T_1 \cdot \frac{P_2}{P_1} = 293.15\text{ K} \cdot \frac{225\text{ kPa}}{150\text{ kPa}} = 439.73\text{ K}. Convert back to Celsius: t2=439.73−273.15≈167∘Ct_2 = 439.73 - 273.15 \approx 167^\circ\text{C}.

03

A sample of neon gas in a flexible balloon has a volume of 2.50 L2.50\text{ L} at 15.0∘C15.0^\circ\text{C} and 0.980 atm0.980\text{ atm}. The gas is transferred to a rigid 1.80 L1.80\text{ L} sealed container and heated until its pressure reaches 1.65 atm1.65\text{ atm}. Calculate the final temperature of the gas in degrees Celsius (∘C^\circ\text{C}).

Answer

164∘C164^\circ\text{C}. Initial temperature: T1=15.0+273.15=288.15 KT_1 = 15.0 + 273.15 = 288.15\text{ K}. Using the Combined Gas Law P1V1T1=P2V2T2\frac{P_1 V_1}{T_1} = \frac{P_2 V_2}{T_2}, rearrange for T2T_2: T2=T1⋅(P2P1)⋅(V2V1)=288.15 K⋅(1.65 atm0.980 atm)⋅(1.80 L2.50 L)≈437.2 KT_2 = T_1 \cdot \left(\frac{P_2}{P_1}\right) \cdot \left(\frac{V_2}{V_1}\right) = 288.15\text{ K} \cdot \left(\frac{1.65\text{ atm}}{0.980\text{ atm}}\right) \cdot \left(\frac{1.80\text{ L}}{2.50\text{ L}}\right) \approx 437.2\text{ K}. Convert back to Celsius: t2=437.2−273.15≈164∘Ct_2 = 437.2 - 273.15 \approx 164^\circ\text{C}.

Loading workspace…