Resources
A forensic chemist analyzes a residue collected from an incendiary device using atomic emission spectroscopy. The detector records a sharp, intense emission transition corresponding to a molar transition energy of . Given Avogadro's number , Planck's constant , and : (a) Work backwards to calculate the energy of a single emitted photon in joules (). (b) Determine the exact wavelength (in ) of this photon. (c) Using the emission line database— (, green), (, pale apple-green), and (, blue)—identify the metal element present in the sample and state its expected flame test color.
Answer and steps
Final answer
(a) ; (b) (closely matching the prominent barium band); (c) Barium (), characteristic pale apple-green flame.
Steps
Part (a): Calculate the Energy of a Single Photon
The molar transition energy represents the total energy released when one mole of excited atoms or ions each emits one photon. To find the energy of an individual photon, convert the energy to joules and divide by Avogadro's number:
Using the relationship :
Pitfall: Forgetting to convert to before dividing leads to a result that is off by a factor of .
Part (b): Determine the Wavelength of the Emitted Photon
According to the Planck-Einstein relation, photon energy is related to wavelength by:
Rearranging to solve for the wavelength :
Substitute the values for Planck's constant (), the speed of light (), and the photon energy calculated in part (a):
Convert meters to nanometers ():
Part (c): Identify the Element and Flame Test Color
Compare the calculated wavelength () with the given database entries:
- : (blue)
- : (green)
- : (pale apple-green)
The calculated emission line at falls within the characteristic barium emission band ():
- Element identified: Barium ()
- Expected flame test color: Pale apple-green
Typical errors
01 The student forgets to convert kilojoules to joules when calculating the single photon energy, resulting in an energy that is off by a factor of 1000.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You forgot to convert the molar energy from kilojoules to joules (). Dividing kilojoules directly by Avogadro's number yields an answer in kilojoules per photon rather than joules, making the calculated energy times too small.
- Step 2Correct
You rearranged the Planck-Einstein relation and converted meters to nanometers correctly, but the resulting wavelength was inflated by a factor of due to the energy error in the previous step.
- Step 3
The wavelength does not match any metal in the database, so no metal can be identified.
CorrectBarium () with a characteristic pale apple-green flame.
Because the calculated wavelength was in the infrared spectrum () instead of the visible spectrum (), you concluded that no metal in the database matched.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled the relationship between molar transition energy and individual photon energy using Avogadro's number.
You accurately recalled and rearranged the Planck-Einstein formula .
You carried through your arithmetic and metric unit conversions consistently based on your initial number.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided directly by without multiplying by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the mismatch between the energy unit of molar transitions (typically reported in ) and the SI base energy unit of Planck's constant ( in ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Match Units with Fundamental Constants
Planck's constant uses joules (), so all input energies must be in joules before substituting into .
Always multiply values given in by to get before computing single-photon energies.
- Sanity Check Emission Wavelengths
Visible flame tests and spectral lines strictly fall within the range of approximately to .
If your calculated wavelength for a flame test color falls outside , immediately check whether you missed a factor of or inverted a formula.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the given molar energy to base SI units: .
Divide by Avogadro's number to find the single photon energy: .
Calculate the wavelength: .
Match with the database: aligns with the barium emission band (), confirming with an expected pale apple-green flame.
(a) ; (b) ; (c) Barium (), pale apple-green flame
02 The student multiplies the molar energy by Avogadro's number instead of dividing, erroneously scaling up to find the energy of a single photon.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You multiplied the molar energy by Avogadro's number instead of dividing. One mole contains photons, so an individual photon must carry a tiny fraction of that molar energy, not a vastly larger amount.
- Step 2Correct
You correctly set up the Planck-Einstein relation and executed the arithmetic accurately, but the resulting wavelength was thrown off by the erroneous energy value from part (a).
- Step 3Correct
Because of the propagated error from earlier steps, you obtained a wavelength of , which prevented you from matching the barium transition at .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the molar transition energy from to .
You correctly rearranged the Planck-Einstein relation to solve for wavelength as .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the direction of unit conversion between macroscopic molar quantities and microscopic single-particle quantities. To go from a per-mole value () to a per-particle value (), you must divide by Avogadro's number (), because a single photon carries only a microscopic fraction of a mole's worth of energy.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the magnitude of photon energy
Visible light photons typically possess energies on the order of .
Always sanity-check your answer: if your calculated photon energy is positive and has an exponent around , you know you multiplied by instead of dividing.
- Use dimensional analysis with units
.
Write out the full unit labels including '/mol' and '/photon' so that units cancel correctly.
CORRECTED PATH
ACEpath Teacher's DemonstrationDivide the molar energy by Avogadro's number: .
Calculate the wavelength: .
Compare with the database: closely matches the emission band ().
(a) ; (b) ; (c) Barium (), pale apple-green flame.
03 The student inverts the wavelength equation by writing λ = E / (hc) instead of λ = hc / E.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You inverted the Planck-Einstein relation when solving for wavelength. Starting from , multiplying both sides by gives , which rearranges to .
- Step 3Correct
Because of the inverted wavelength value from part (b), you were unable to match the calculated wavelength to the barium emission band in the reference table.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the molar transition energy from to .
You applied Avogadro's number accurately to obtain the single-photon energy.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou isolated as rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen rearranging an equation where the target variable is in the denominator (), dividing by the constants instead of clearing the denominator first leads to an inverted expression. Dimensional analysis confirms that has units of (wavenumber) rather than (wavelength).
REASONING PATH
Your ACEpath teacher’s suggested approach- Clearing Denominators
To solve for , first multiply both sides by to get , then divide by to get .
Always write out the intermediate cross-multiplication step before isolating a variable from a denominator.
- Unit Sanity Check
Wavelength must have units of distance (meters or nanometers). Visible light wavelengths are always around ().
If your calculated wavelength has a huge exponent such as or , suspect an inverted equation immediately.
CORRECTED PATH
ACEpath Teacher's DemonstrationRearrange the Planck-Einstein relation correctly: .
Substitute the constants and calculated energy: .
Convert to nanometers: .
Compare to the database: it closely matches (, pale apple-green).
(a) ; (b) ; (c) Barium (), pale apple-green flame.
Lock it in
How do you correctly convert a molar transition energy in to the energy of a single photon in joules ()?
. Always convert kilojoules to joules first because is defined using joules.
Similar question
An unknown salt produces an atomic emission line with a molar transition energy of . Calculate the energy of a single emitted photon in joules (). Use .
Answer
. Key step: Convert to joules first, , then divide by : .
Using the single photon energy calculated from (), calculate its wavelength in nanometers () and identify whether the flame appears crimson-red (, ), yellow (, ), or violet (, ). (, )
Answer
(violet flame, ). Key step: , which closely matches potassium.
A pyrotechnic compound produces a red emission line at . Determine the transition energy per mole of atoms in . (, , )
Answer
. Key steps: . Multiply by : .