Resources

A student measures the electrical resistivity of a copper alloy wire across temperature. At reference temperature T0=20.0∘CT_0 = 20.0^\circ\text{C}, the wire has resistivity ρ0=2.80×10−8 Ω⋅m\rho_0 = 2.80 \times 10^{-8}\ \Omega\cdot\text{m} and temperature coefficient of resistivity α=+0.00393 ∘C−1\alpha = +0.00393\text{ }^\circ\text{C}^{-1}. (a) Calculate the electrical resistivity ρ\rho when the wire is cooled in liquid nitrogen to T1=−196.0∘CT_1 = -196.0^\circ\text{C} using the linear relation ρ=ρ0[1+α(T−T0)]\rho = \rho_0[1 + \alpha(T - T_0)]. (b) In evaluating why pure metals show positive temperature coefficients (α>0\alpha > 0) while intrinsic semiconductors show negative coefficients (α<0\alpha < 0), explain the physical meaning of the sign of dρdT\frac{d\rho}{dT} in terms of charge carrier density versus lattice vibration (phonon) scattering.

Answer and steps

Final answer

(a) ρ=4.23×10−9 Ω⋅m\rho = 4.23 \times 10^{-9}\ \Omega\cdot\text{m}; (b) For metals, carrier density nn is constant; higher temperature increases lattice thermal vibrations (phonons), reducing relaxation time τ\tau and increasing scattering, so dρdT>0\frac{d\rho}{dT} > 0. For intrinsic semiconductors, thermal excitation exponentially increases carrier density nn, dominating over scattering, so dρdT<0\frac{d\rho}{dT} < 0.

Steps

Part (a): Calculating Resistivity at Low Temperature

  1. Identify the Given Values and Linear Model:

    • Reference temperature: T0=20.0∘CT_0 = 20.0^\circ\text{C}
    • Reference resistivity: ρ0=2.80×10−8 Ω⋅m\rho_0 = 2.80 \times 10^{-8}\ \Omega\cdot\text{m}
    • Temperature coefficient of resistivity: α=+0.00393 ∘C−1\alpha = +0.00393\ ^\circ\text{C}^{-1}
    • Final temperature: T1=−196.0∘CT_1 = -196.0^\circ\text{C}

    The linear temperature dependence of resistivity is given by: ρ=ρ0[1+α(T1−T0)]\rho = \rho_0 [1 + \alpha(T_1 - T_0)]

  2. Calculate the Temperature Difference: ΔT=T1−T0=−196.0∘C−20.0∘C=−216.0∘C\Delta T = T_1 - T_0 = -196.0^\circ\text{C} - 20.0^\circ\text{C} = -216.0^\circ\text{C}
  3. Compute the Bracketed Scaling Factor: 1+αΔT=1+(0.00393 ∘C−1)(−216.0∘C)=1−0.84888=0.151121 + \alpha \Delta T = 1 + (0.00393\ ^\circ\text{C}^{-1})(-216.0^\circ\text{C}) = 1 - 0.84888 = 0.15112
  4. Calculate ρ\rho: ρ=(2.80×10−8 Ω⋅m)⋅0.15112≈4.23×10−9 Ω⋅m\rho = (2.80 \times 10^{-8}\ \Omega\cdot\text{m}) \cdot 0.15112 \approx 4.23 \times 10^{-9}\ \Omega\cdot\text{m}

    (Common Pitfall: Ensure the sign of ΔT\Delta T is negative when cooling below the reference temperature; subtracting T1T_1 from T0T_0 rather than T1−T0T_1 - T_0 is a frequent algebraic mistake).


Part (b): Physical Origin of the Sign of dρdT\frac{d\rho}{dT}

Electrical resistivity can be understood microscopically via the Drude model: ρ=mene2τ\rho = \frac{m_e}{n e^2 \tau} where mem_e is electron mass, ee is elementary charge, nn is charge carrier concentration (carrier density), and τ\tau is the mean relaxation time between scattering events.

  • Metals (dρdT>0\frac{d\rho}{dT} > 0, α>0\alpha > 0): In metallic bonding, valence electrons form a delocalized "sea of electrons." The carrier density nn is essentially fixed and independent of temperature. As temperature increases, the positive metal ion cores in the crystal lattice vibrate with greater amplitude (increased lattice thermal vibrations, or phonons). This increases the scattering probability of conducting electrons, shortening the mean free time τ\tau. Because nn is constant and τ\tau decreases, resistivity increases with temperature: dρdT>0\frac{d\rho}{dT} > 0
  • Intrinsic Semiconductors (dρdT<0\frac{d\rho}{dT} < 0, α<0\alpha < 0): At low temperatures, electrons are bound within the valence band. Increasing temperature thermally excites electrons across the band gap into the conduction band, causing the carrier density nn to increase exponentially (n∝e−Eg/(2kBT)n \propto e^{-E_g / (2 k_B T)}). Although lattice vibrations also increase (reducing τ\tau), the exponential increase in carrier density nn strongly dominates over the decrease in τ\tau. As a result, resistivity drops substantially as temperature rises: dρdT<0\frac{d\rho}{dT} < 0

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates ΔT as T₀ - T₁ instead of T₁ - T₀, resulting in an erroneous temperature increase and higher resistivity upon cooling.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔT=20.0∘C−(−196.0∘C)=216.0∘C\Delta T = 20.0^\circ\text{C} - (-196.0^\circ\text{C}) = 216.0^\circ\text{C}

    Correct

    ΔT=T1−T0=−196.0∘C−20.0∘C=−216.0∘C\Delta T = T_1 - T_0 = -196.0^\circ\text{C} - 20.0^\circ\text{C} = -216.0^\circ\text{C}

    You reversed the initial and final temperatures when calculating the change in temperature. The change is defined as final minus initial (T1−T0T_1 - T_0). Cooling down to liquid nitrogen temperatures must yield a negative ΔT\Delta T.

  2. Step 2

    ρ=(2.80×10−8)[1+(0.00393)(216.0)]  ⟹  ρ=(2.80×10−8)(1+0.84888)  ⟹  ρ=5.18×10−8 Ω⋅m\rho = (2.80 \times 10^{-8})[1 + (0.00393)(216.0)] \implies \rho = (2.80 \times 10^{-8})(1 + 0.84888) \implies \rho = 5.18 \times 10^{-8}\ \Omega\cdot\text{m}

    Correct

    ρ=(2.80×10−8 Ω⋅m)[1+(0.00393 ∘C−1)(−216.0∘C)]=4.23×10−9 Ω⋅m\rho = (2.80 \times 10^{-8}\ \Omega\cdot\text{m})[1 + (0.00393\ ^\circ\text{C}^{-1})(-216.0^\circ\text{C})] = 4.23 \times 10^{-9}\ \Omega\cdot\text{m}

    Your arithmetic and substitution steps followed your formula correctly, but the result was affected by the positive ΔT\Delta T sign error from Step 1.

  3. Step 3

    In metals, carrier density is constant and lattice vibration scattering increases with temperature, so resistivity increases and dρ/dT>0d\rho/dT > 0. In intrinsic semiconductors, thermal generation of charge carriers increases carrier density, which dominates over scattering, so dρ/dT<0d\rho/dT < 0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly articulated the microscopic roles of carrier density and lattice vibration scattering across metals and intrinsic semiconductors.

You correctly recalled and algebraically applied the linear temperature relation ρ=ρ0[1+αΔT]\rho = \rho_0[1 + \alpha\Delta T].

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in delta variable definition

You subtracted the final temperature from the reference temperature rather than computing T−T0T - T_0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the standard definition of change as ΔT=Tfinal−Tinitial\Delta T = T_{\text{final}} - T_{\text{initial}}, or set up the subtraction to keep ΔT\Delta T positive without considering that cooling requires a negative change in temperature.

REASONING PATH
Your ACEpath teacher’s suggested approach
Temperature change sign check
  • ΔT\Delta T is always defined as Tfinal−TreferenceT_{\text{final}} - T_{\text{reference}} (T−T0T - T_0). When cooling, ΔT<0\Delta T < 0.

  • Always write out ΔT=T−T0\Delta T = T - T_0 explicitly before substituting negative temperatures.

Physical plausibility check for metals
  • Because metals have positive temperature coefficients (α>0\alpha > 0), cooling must decrease electrical resistivity (ρ<ρ0\rho < \rho_0).

  • Verify after computing whether cooling produced a resistivity value lower than the room-temperature value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct temperature difference: ΔT=T1−T0=−196.0∘C−20.0∘C=−216.0∘C\Delta T = T_1 - T_0 = -196.0^\circ\text{C} - 20.0^\circ\text{C} = -216.0^\circ\text{C}.

  2. Substitute ΔT\Delta T into the linear equation: ρ=(2.80×10−8 Ω⋅m)[1+(0.00393 ∘C−1)(−216.0∘C)]\rho = (2.80 \times 10^{-8}\ \Omega\cdot\text{m})[1 + (0.00393\ ^\circ\text{C}^{-1})(-216.0^\circ\text{C})].

  3. Evaluate the bracketed term: 1−0.84888=0.151121 - 0.84888 = 0.15112.

  4. Multiply to find ρ\rho: ρ=(2.80×10−8 Ω⋅m)(0.15112)≈4.23×10−9 Ω⋅m\rho = (2.80 \times 10^{-8}\ \Omega\cdot\text{m})(0.15112) \approx 4.23 \times 10^{-9}\ \Omega\cdot\text{m}.

Final answer

(a) ρ=4.23×10−9 Ω⋅m\rho = 4.23 \times 10^{-9}\ \Omega\cdot\text{m}; (b) For metals, nn is constant and phonon scattering increases with TT, so dρdT>0\frac{d\rho}{dT} > 0. For semiconductors, carrier generation dominates over scattering, so dρdT<0\frac{d\rho}{dT} < 0.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice explicitly writing (Tfinal−Tinitial)(T_{\text{final}} - T_{\text{initial}}) with parentheses when dealing with negative temperatures.

  • Perform a sanity check on transport properties: metals become better conductors (lower resistivity) when cooled.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the physical mechanism of semiconductors with metals, claiming that semiconductor resistivity decreases because lattice vibrations freeze out rather than because carrier density increases.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔT=−196.0∘C−20.0∘C=−216.0∘C  ⟹  ρ=(2.80×10−8)[1+(0.00393)(−216.0)]  ⟹  ρ=(2.80×10−8)(1−0.84888)  ⟹  ρ=4.23×10−9 Ω⋅m\Delta T = -196.0^\circ\text{C} - 20.0^\circ\text{C} = -216.0^\circ\text{C} \implies \rho = (2.80 \times 10^{-8})[1 + (0.00393)(-216.0)] \implies \rho = (2.80 \times 10^{-8})(1 - 0.84888) \implies \rho = 4.23 \times 10^{-9}\ \Omega\cdot\text{m}

  2. Step 2

    For metals, dρ/dT>0d\rho/dT > 0 because carrier density is fixed and increased phonon scattering impedes electron flow as temperature rises.

  3. Step 3

    For semiconductors, dρ/dT<0d\rho/dT < 0 because rising temperature reduces lattice vibrations and allows electrons to move more freely, while carrier density stays unchanged.

    Correct

    In intrinsic semiconductors, thermal excitation promotes electrons across the band gap into the conduction band, causing carrier density nn to increase exponentially; this increase dominates over higher phonon scattering, so dρdT<0\frac{d\rho}{dT} < 0.

    Lattice vibrations increase with temperature in all solid lattices. Semiconductor resistivity decreases with temperature because thermal excitation across the band gap exponentially boosts the free carrier concentration nn, which far outweighs the opposing effect of increased phonon scattering.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the temperature change and final resistivity accurately with correct signs and units in part (a).

You correctly attributed the positive temperature coefficient in metals to increased phonon scattering at fixed carrier density.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentifying the Mechanism of Semiconductor Resistivity Temperature Dependence

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that charge carrier density in intrinsic semiconductors remains fixed with temperature and that thermal energy reduces lattice vibrations, whereas thermal energy actually increases lattice vibrations in all solids while exponentially generating free carriers across the band gap.

REASONING PATH
Your ACEpath teacher’s suggested approach
Universal Effect of Temperature on Lattice Vibrations
  • In every crystalline solid, increasing temperature increases thermal energy (kBTk_B T) and lattice vibration amplitude (phonon population); lattice vibrations never decrease with rising temperature.

  • Always treat lattice phonon scattering as increasing with temperature regardless of whether the material is a metal, semiconductor, or insulator.

Carrier Density Contrast (Drude Framework: $\rho = \frac{m_e}{n e^2 \tau}$)
  • For metals, valence electrons are already delocalized (n≈constantn \approx \text{constant}), so scattering dictates dρdT>0\frac{d\rho}{dT} > 0. For intrinsic semiconductors, electrons must be thermally excited across the band gap (n∝e−Eg/(2kBT)n \propto e^{-E_g / (2k_B T)}), so exponential carrier growth dominates over scattering and drives dρdT<0\frac{d\rho}{dT} < 0.

  • When explaining temperature coefficients, contrast constant carrier density nn in metals with exponentially activated carrier density n(T)n(T) in semiconductors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express electrical conductivity and resistivity via the Drude relation: ρ=mene2τ\rho = \frac{m_e}{n e^2 \tau}.

  2. Note that for all solids, higher temperature increases lattice vibrations (phonons), which shortens relaxation time τ\tau and tends to increase resistivity.

  3. Recognize that in an intrinsic semiconductor, valence electrons are bound at low temperatures. Thermal energy promotes electrons across the band gap EgE_g into the conduction band.

  4. Conclude that because the carrier concentration increases exponentially with temperature (n(T)∝e−Eg/(2kBT)n(T) \propto e^{-E_g/(2k_B T)}), the dramatic rise in nn overwhelms the decrease in τ\tau, producing dρdT<0\frac{d\rho}{dT} < 0.

Final answer

(a) ρ=4.23×10−9 Ω⋅m\rho = 4.23 \times 10^{-9}\ \Omega\cdot\text{m}; (b) In metals, nn is constant while phonon scattering increases with temperature, so dρdT>0\frac{d\rho}{dT} > 0. In intrinsic semiconductors, thermal excitation exponentially increases carrier density nn, overcoming increased phonon scattering so that dρdT<0\frac{d\rho}{dT} < 0.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Drude conductivity equation σ=ne2τm\sigma = \frac{n e^2 \tau}{m} to analyze how temperature independently impacts carrier density nn versus scattering time τ\tau.

  • Practice distinguishing metals, intrinsic semiconductors, and doped semiconductors on a resistivity versus temperature plot.

Lock it in

Similar question

01

An aluminum wire has a resistivity of ρ0=2.65×10−8 Ω⋅m\rho_0 = 2.65 \times 10^{-8}\ \Omega\cdot\text{m} at T0=20.0∘CT_0 = 20.0^\circ\text{C} and a temperature coefficient α=0.00429∘C−1\alpha = 0.00429^\circ\text{C}^{-1}. Calculate its resistivity when cooled in dry ice to T=−78.5∘CT = -78.5^\circ\text{C}.

Answer

ΔT=−78.5∘C−20.0∘C=−98.5∘C\Delta T = -78.5^\circ\text{C} - 20.0^\circ\text{C} = -98.5^\circ\text{C}. Then ρ=(2.65×10−8)[1+0.00429(−98.5)]=(2.65×10−8)(1−0.4226)≈1.53×10−8 Ω⋅m\rho = (2.65 \times 10^{-8})[1 + 0.00429(-98.5)] = (2.65 \times 10^{-8})(1 - 0.4226) \approx 1.53 \times 10^{-8}\ \Omega\cdot\text{m}.

02

A platinum resistance thermometer has a resistance of 100.0 Ω100.0\ \Omega at 0.0∘C0.0^\circ\text{C} with α=0.00392∘C−1\alpha = 0.00392^\circ\text{C}^{-1}. When placed in a cold bath, its resistance drops to 45.1 Ω45.1\ \Omega. Determine the temperature of the bath.

Answer

Using R=R0[1+α(T−T0)]R = R_0[1 + \alpha(T - T_0)], 45.1=100.0[1+0.00392(T−0)]  ⟹  0.451=1+0.00392T  ⟹  0.00392T=−0.549  ⟹  T=−140.1∘C45.1 = 100.0[1 + 0.00392(T - 0)] \implies 0.451 = 1 + 0.00392T \implies 0.00392T = -0.549 \implies T = -140.1^\circ\text{C}.

03

Explain why cooling a heavily doped n-type semiconductor down from room temperature might initially cause its resistivity to decrease slightly before eventually increasing sharply at extremely low temperatures.

Answer

Between moderate and low temperatures, carrier density nn remains constant (exhaustion/freeze-out has not yet occurred), so reduced lattice phonon scattering decreases resistivity. At extremely low cryogenic temperatures, carrier freeze-out occurs where thermal energy cannot ionize donor atoms, causing nn to plummet exponentially and driving resistivity sharply up.

Loading workspace…