Resources

A standard electrochemical cell operates under standard conditions using the overall redox equation: Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn}(s) + \text{Cu}^{2+}(aq) \rightarrow \text{Zn}^{2+}(aq) + \text{Cu}(s). The standard reduction potentials are E∘=−0.763 VE^\circ = -0.763\text{ V} for Zn2+/Zn\text{Zn}^{2+}/\text{Zn} and E∘=+0.342 VE^\circ = +0.342\text{ V} for Cu2+/Cu\text{Cu}^{2+}/\text{Cu}. (a) Identify the chemical formula and physical state of the species acting as the spectator spectator counter-ion if the copper solution was prepared using Cu(NO3)2(aq)\text{Cu(NO}_3)_2(aq). (b) Calculate the standard cell potential Ecell∘E^\circ_{\text{cell}} using proper thermodynamic sign conventions. (c) Calculate the standard Gibbs free energy change, ΔG∘\Delta G^\circ, in kJ/mol\text{kJ/mol} for this reaction at 298 K298\text{ K} (F=96485 C/molF = 96485\text{ C/mol}).

Answer and steps

Final answer

(a) NO3−(aq)\text{NO}_3^-(aq); (b) Ecell∘=+1.105 VE^\circ_{\text{cell}} = +1.105\text{ V}; (c) ΔG∘=−213 kJ/mol\Delta G^\circ = -213\text{ kJ/mol}.

Steps

Part (a): Identifying the Spectator Counter-Ion

  1. Dissociation of the salt: When copper(II) nitrate dissolves completely in water, it dissociates into its constituent ions: Cu(NOX3)X2(aq)→CuX2+(aq)+2NOX3X−(aq)\ce{Cu(NO3)2}(aq) \rightarrow \ce{Cu^2+}(aq) + 2\ce{NO3^-}(aq)
  2. Spectator ion role: In the given net ionic redox reaction, CuX2+(aq)\ce{Cu^2+}(aq) is reduced to Cu(s)\ce{Cu}(s), while the nitrate ions do not participate in electron transfer or undergo any chemical change. Therefore, the spectator counter-ion is the aqueous nitrate ion: NOX3X−(aq)\ce{NO3^-}(aq)

Part (b): Calculating the Standard Cell Potential (Ecell∘E^\circ_{\text{cell}})

  1. Identify the half-reactions:

    • Reduction (Cathode): CuX2+(aq)+2e−→Cu(s)(Ecathode∘=+0.342 V)\ce{Cu^2+}(aq) + 2e^- \rightarrow \ce{Cu}(s) \quad (E^\circ_{\text{cathode}} = +0.342\text{ V})
    • Oxidation (Anode): Zn(s)→ZnX2+(aq)+2e−(Eanode∘=−0.763 V)\ce{Zn}(s) \rightarrow \ce{Zn^2+}(aq) + 2e^- \quad (E^\circ_{\text{anode}} = -0.763\text{ V})
  2. Compute the standard cell potential: Using the standard reduction potentials: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} Ecell∘=+0.342 V−(−0.763 V)=+1.105 VE^\circ_{\text{cell}} = +0.342\text{ V} - (-0.763\text{ V}) = +1.105\text{ V}

    Pitfall to avoid: Do not change the sign of Eanode∘E^\circ_{\text{anode}} before plugging it into the formula Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}, as standard reduction potentials are already tabulated in reduction form.


Part (c): Calculating the Standard Gibbs Free Energy Change (ΔG∘\Delta G^\circ)

  1. Determine the number of moles of electrons transferred (nn): In the balanced equation, 22 electrons are transferred per mole of reaction (n=2n = 2).
  2. Apply the thermodynamic relationship: ΔG∘=−nFEcell∘\Delta G^\circ = -n F E^\circ_{\text{cell}}

    Substitute the known values (n=2n = 2, F=96485 C/molF = 96485\text{ C/mol}, and Ecell∘=+1.105 VE^\circ_{\text{cell}} = +1.105\text{ V}): ΔG∘=−(2)(96485 C/mol)(1.105 V)\Delta G^\circ = -(2)(96485\text{ C/mol})(1.105\text{ V}) ΔG∘=−213231.85 J/mol\Delta G^\circ = -213231.85\text{ J/mol}

  3. Convert to kilojoules per mole (kJ/mol\text{kJ/mol}): ΔG∘=−213231.85 J/mol1000 J/kJ≈−213 kJ/mol\Delta G^\circ = \frac{-213231.85\text{ J/mol}}{1000\text{ J/kJ}} \approx -213\text{ kJ/mol}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the cathode and anode potentials when calculating the cell potential, obtaining a negative value of -1.105 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NO3−(aq)\text{NO}_3^-(aq)

  2. Step 2

    Ecell∘=E∘(Zn2+/Zn)−E∘(Cu2+/Cu)  ⟹  Ecell∘=−0.763 V−0.342 V=−1.105 VE^\circ_{\text{cell}} = E^\circ(\text{Zn}^{2+}/\text{Zn}) - E^\circ(\text{Cu}^{2+}/\text{Cu}) \implies E^\circ_{\text{cell}} = -0.763\text{ V} - 0.342\text{ V} = -1.105\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=+0.342 V−(−0.763 V)=+1.105 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.342\text{ V} - (-0.763\text{ V}) = +1.105\text{ V}

    You swapped the cathode and anode. In the overall reaction, CuX2+\ce{Cu^2+} gains electrons (reduction at cathode) while Zn\ce{Zn} loses electrons (oxidation at anode), so Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} must give +1.105 V+1.105\text{ V} for a spontaneous galvanic cell.

  3. Step 3

    n=2  ⟹  ΔG∘=−(2)(96485)(−1.105)  ⟹  ΔG∘=+213232 J/mol=+213 kJ/moln = 2 \implies \Delta G^\circ = -(2)(96485)(-1.105) \implies \Delta G^\circ = +213232\text{ J/mol} = +213\text{ kJ/mol}

    Correct

    ΔG∘=−(2)(96485 C/mol)(1.105 V)=−213232 J/mol≈−213 kJ/mol\Delta G^\circ = -(2)(96485\text{ C/mol})(1.105\text{ V}) = -213232\text{ J/mol} \approx -213\text{ kJ/mol}

    Your formula, electron count (n=2n = 2), and arithmetic were completely correct, but the final sign was flipped due to carrying through the negative cell potential from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified NO3−(aq)\text{NO}_3^-(aq) as the non-reacting spectator ion.

You accurately determined that n=2n = 2 electrons are transferred in the redox equation.

You correctly set up and calculated the thermodynamic relation ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Cathode and Anode Potentials

No, this is a conceptual misunderstanding of assigning reduction/cathode and oxidation/anode from the given chemical equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You subtracted the reduction half-cell from the oxidation half-cell instead of computing Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} (or Ereduction∘−Eoxidation∘E^\circ_{\text{reduction}} - E^\circ_{\text{oxidation}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Reduction vs. Oxidation
  • Reduction happens at the cathode (decrease in oxidation number); oxidation happens at the anode (increase in oxidation number).

  • Look at the overall equation: CuX2+→Cu\ce{Cu^2+} \rightarrow \ce{Cu} is reduction (cathode), and Zn→ZnX2+\ce{Zn} \rightarrow \ce{Zn^2+} is oxidation (anode).

Calculate Cell Potential
  • Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} using standard reduction potentials as tabulated.

  • Substitute the reduction potentials directly: Ecell∘=(+0.342 V)−(−0.763 V)=+1.105 VE^\circ_{\text{cell}} = (+0.342\text{ V}) - (-0.763\text{ V}) = +1.105\text{ V}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the cathode half-reaction where reduction occurs: CuX2+(aq)+2e−→Cu(s)\ce{Cu^2+}(aq) + 2e^- \rightarrow \ce{Cu}(s) with E∘=+0.342 VE^\circ = +0.342\text{ V}.

  2. Identify the anode half-reaction where oxidation occurs: Zn(s)→ZnX2+(aq)+2e−\ce{Zn}(s) \rightarrow \ce{Zn^2+}(aq) + 2e^- with E∘=−0.763 VE^\circ = -0.763\text{ V}.

  3. Calculate the cell potential: Ecell∘=Ecathode∘−Eanode∘=+0.342 V−(−0.763 V)=+1.105 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.342\text{ V} - (-0.763\text{ V}) = +1.105\text{ V}.

  4. Substitute into the Gibbs free energy formula with n=2n = 2: ΔG∘=−(2)(96485 C/mol)(1.105 V)=−213 kJ/mol\Delta G^\circ = -(2)(96485\text{ C/mol})(1.105\text{ V}) = -213\text{ kJ/mol}.

Final answer

(a) NO3−(aq)\text{NO}_3^-(aq); (b) Ecell∘=+1.105 VE^\circ_{\text{cell}} = +1.105\text{ V}; (c) ΔG∘=−213 kJ/mol\Delta G^\circ = -213\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the two half-reactions explicitly and label which is cathode (reduction) and anode (oxidation) before applying Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

  • Remember that a standard galvanic/electrochemical cell producing spontaneous current must have Ecell∘>0E^\circ_{\text{cell}} > 0 and ΔG∘<0\Delta G^\circ < 0.

OverviewACEpath Teacher's Diagnosis

02 The student omits the negative sign in the thermodynamic relation ΔG° = -nFE°cell, arriving at a positive Gibbs free energy value of +213 kJ/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NO3−(aq)\text{NO}_3^-(aq)

  2. Step 2

    Ecell∘=0.342 V−(−0.763 V)  ⟹  Ecell∘=+1.105 VE^\circ_{\text{cell}} = 0.342\text{ V} - (-0.763\text{ V}) \implies E^\circ_{\text{cell}} = +1.105\text{ V}

  3. Step 3

    n=2  ⟹  ΔG∘=nFEcell∘n = 2 \implies \Delta G^\circ = nFE^\circ_{\text{cell}}

    Correct

    n=2  ⟹  ΔG∘=−nFEcell∘n = 2 \implies \Delta G^\circ = -nFE^\circ_{\text{cell}}

    You correctly determined that n=2n = 2, but omitted the negative sign in the thermodynamic formula relating ΔG∘\Delta G^\circ to Ecell∘E^\circ_{\text{cell}}.

  4. Step 4

    ΔG∘=(2)(96485)(1.105)=+213 kJ/mol\Delta G^\circ = (2)(96485)(1.105) = +213\text{ kJ/mol}

    Correct

    ΔG∘=−(2)(96485 C/mol)(1.105 V)=−213232 J/mol≈−213 kJ/mol\Delta G^\circ = -(2)(96485\text{ C/mol})(1.105\text{ V}) = -213232\text{ J/mol} \approx -213\text{ kJ/mol}

    Your arithmetic and unit conversion to kilojoules per mole were accurate, but the result carried forward the incorrect positive sign from the formula in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the aqueous nitrate ion NO3−(aq)\text{NO}_3^-(aq) as the spectator counter-ion.

You correctly calculated the standard cell potential Ecell∘=+1.105 VE^\circ_{\text{cell}} = +1.105\text{ V} from the reduction potentials.

You correctly deduced that 2 mol2\text{ mol} of electrons are transferred per mole of reaction.

You accurately carried out the numerical multiplication and converted joules to kilojoules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of negative sign in Gibbs free energy relation

You wrote ΔG∘=nFEcell∘\Delta G^\circ = nFE^\circ_{\text{cell}} without the leading minus sign, yielding a positive value.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting the thermodynamic sign convention: a positive cell potential (Ecell∘>0E^\circ_{\text{cell}} > 0) corresponds to an electrochemically spontaneous reaction, which must correspond to a negative change in Gibbs free energy (ΔG∘<0\Delta G^\circ < 0). Thus, the equation requires an explicit negative sign: ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Spontaneity Check
  • Spontaneous processes have Ecell∘>0E^\circ_{\text{cell}} > 0 and ΔG∘<0\Delta G^\circ < 0.

  • Always verify that a galvanic cell with a positive voltage produces a negative ΔG∘\Delta G^\circ.

Fundamental Relation
  • ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}}, where 1 V⋅C=1 J1\text{ V} \cdot \text{C} = 1\text{ J}.

  • Write out the complete formula with the negative sign before substituting numeric values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the thermodynamic formula relating free energy change and cell potential: ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}}.

  2. Substitute n=2n = 2, F=96485 C/molF = 96485\text{ C/mol}, and Ecell∘=1.105 VE^\circ_{\text{cell}} = 1.105\text{ V}: ΔG∘=−(2)(96485 C/mol)(1.105 V)=−213232 J/mol\Delta G^\circ = -(2)(96485\text{ C/mol})(1.105\text{ V}) = -213232\text{ J/mol}.

  3. Convert to kJ/mol\text{kJ/mol} by dividing by 1000 J/kJ1000\text{ J/kJ}: ΔG∘≈−213 kJ/mol\Delta G^\circ \approx -213\text{ kJ/mol}.

Final answer

ΔG∘=−213 kJ/mol\Delta G^\circ = -213\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that positive cell potentials consistently yield negative Gibbs free energy values.

  • Practice using ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}} across spontaneous and non-spontaneous cells to cement the sign convention.

OverviewACEpath Teacher's Diagnosis

03 The student assumes n = 1 electron is transferred rather than n = 2, halving the magnitude of the calculated standard Gibbs free energy to -107 kJ/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NO3−(aq)\text{NO}_3^-(aq)

  2. Step 2

    Ecell∘=0.342 V−(−0.763 V)=+1.105 VE^\circ_{\text{cell}} = 0.342\text{ V} - (-0.763\text{ V}) = +1.105\text{ V}

  3. Step 3

    n=1n = 1

    Correct

    n=2n = 2

    In the balanced redox reaction, zinc is oxidized from Zn(s)\text{Zn}(s) to Zn2+(aq)\text{Zn}^{2+}(aq) by losing 22 electrons, and copper(II) is reduced from Cu2+(aq)\text{Cu}^{2+}(aq) to Cu(s)\text{Cu}(s) by gaining 22 electrons, so n=2n = 2 moles of electrons transferred per mole of reaction.

  4. Step 4

    ΔG∘=−(1)(96485)(1.105)⟹ΔG∘=−106616 J/mol=−107 kJ/mol\Delta G^\circ = -(1)(96485)(1.105) \Longrightarrow \Delta G^\circ = -106616\text{ J/mol} = -107\text{ kJ/mol}

    Correct

    ΔG∘=−(2)(96485 C/mol)(1.105 V)=−213232 J/mol≈−213 kJ/mol\Delta G^\circ = -(2)(96485\text{ C/mol})(1.105\text{ V}) = -213232\text{ J/mol} \approx -213\text{ kJ/mol}

    Your calculation followed the correct formula ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}} and conversion to kJ/mol\text{kJ/mol}, but the numerical outcome was affected by using n=1n = 1 rather than n=2n = 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the correct spectator ion formula and state.

You accurately calculated the standard cell potential using proper thermodynamic sign conventions.

You used the correct equation ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}} and converted joules to kilojoules properly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect electron count in electrochemical free energy

You wrote n=1n = 1 instead of determining the total number of electrons exchanged between the two half-reactions.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely looked at the stoichiometric coefficients of 11 in front of the single chemical species in Zn+Cu2+→Zn2++Cu\text{Zn} + \text{Cu}^{2+} \rightarrow \text{Zn}^{2+} + \text{Cu} rather than splitting the equation into separate half-reactions to count the electrons transferred (2e−2e^-).

REASONING PATH
Your ACEpath teacher’s suggested approach
Separate Into Half-Reactions
  • The value of nn in ΔG∘=−nFE∘\Delta G^\circ = -nFE^\circ is the moles of electrons transferred in the balanced redox equation, found from the change in oxidation number.

  • Always write out either the oxidation half-reaction (Zn→Zn2++2e−\text{Zn} \rightarrow \text{Zn}^{2+} + 2e^-) or reduction half-reaction (Cu2++2e−→Cu\text{Cu}^{2+} + 2e^- \rightarrow \text{Cu}) to read nn directly from the electron coefficient.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the oxidation half-reaction: Zn(s)→Zn2+(aq)+2e−\text{Zn}(s) \rightarrow \text{Zn}^{2+}(aq) + 2e^-, which shows that n=2n = 2.

  2. Substitute n=2n = 2, F=96485 C/molF = 96485\text{ C/mol}, and Ecell∘=1.105 VE^\circ_{\text{cell}} = 1.105\text{ V} into ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}}.

  3. Compute ΔG∘=−(2)(96485)(1.105)=−213231.85 J/mol=−213 kJ/mol\Delta G^\circ = -(2)(96485)(1.105) = -213231.85\text{ J/mol} = -213\text{ kJ/mol}.

Final answer

(a) NO3−(aq)\text{NO}_3^-(aq); (b) Ecell∘=+1.105 VE^\circ_{\text{cell}} = +1.105\text{ V}; (c) ΔG∘=−213 kJ/mol\Delta G^\circ = -213\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice splitting balanced net ionic redox equations into oxidation and reduction half-reactions to confirm the value of nn.

  • Verify that the oxidation number change per atom multiplied by the number of reacting atoms equals nn before applying ΔG∘=−nFE∘\Delta G^\circ = -nFE^\circ.

Lock it in

Similar question

01

A galvanic cell operates via the reaction: Mg(s)+FeX2+(aq)→MgX2+(aq)+Fe(s)\ce{Mg}(s) + \ce{Fe^2+}(aq) \rightarrow \ce{Mg^2+}(aq) + \ce{Fe}(s). Given E∘(MgX2+/Mg)=−2.37 VE^\circ(\ce{Mg^2+/Mg}) = -2.37\text{ V} and E∘(FeX2+/Fe)=−0.44 VE^\circ(\ce{Fe^2+/Fe}) = -0.44\text{ V}, calculate the standard cell potential Ecell∘E^\circ_{\text{cell}}.

Answer

Ecell∘=+1.93 VE^\circ_{\text{cell}} = +1.93\text{ V}. Reduction occurs at the cathode (FeX2+→Fe\ce{Fe^2+} \rightarrow \ce{Fe}), and oxidation occurs at the anode (Mg→MgX2+\ce{Mg} \rightarrow \ce{Mg^2+}). Thus, Ecell∘=Ecathode∘−Eanode∘=−0.44 V−(−2.37 V)=+1.93 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = -0.44\text{ V} - (-2.37\text{ V}) = +1.93\text{ V}.

02

For the reaction 2Al(s)+3SnX2+(aq)→2AlX3+(aq)+3Sn(s)2\ce{Al}(s) + 3\ce{Sn^2+}(aq) \rightarrow 2\ce{Al^3+}(aq) + 3\ce{Sn}(s), the standard reduction potentials are E∘(AlX3+/Al)=−1.66 VE^\circ(\ce{Al^3+/Al}) = -1.66\text{ V} and E∘(SnX2+/Sn)=−0.14 VE^\circ(\ce{Sn^2+/Sn}) = -0.14\text{ V}. (a) Calculate Ecell∘E^\circ_{\text{cell}}. (b) Determine the standard Gibbs free energy change, ΔG∘\Delta G^\circ, in kJ/mol\text{kJ/mol} (F=96485 C/molF = 96485\text{ C/mol}).

Answer

(a) Ecell∘=+1.52 VE^\circ_{\text{cell}} = +1.52\text{ V}; (b) ΔG∘=−880 kJ/mol\Delta G^\circ = -880\text{ kJ/mol}. Cathode: SnX2+→Sn\ce{Sn^2+} \rightarrow \ce{Sn} (E∘=−0.14 VE^\circ = -0.14\text{ V}); Anode: Al→AlX3+\ce{Al} \rightarrow \ce{Al^3+} (E∘=−1.66 VE^\circ = -1.66\text{ V}). Ecell∘=−0.14−(−1.66)=+1.52 VE^\circ_{\text{cell}} = -0.14 - (-1.66) = +1.52\text{ V}. The balanced reaction transfers n=6n = 6 electrons. ΔG∘=−nFE∘=−(6)(96485 C/mol)(1.52 V)=−879943 J/mol≈−880 kJ/mol\Delta G^\circ = -nFE^\circ = -(6)(96485\text{ C/mol})(1.52\text{ V}) = -879943\text{ J/mol} \approx -880\text{ kJ/mol}.

03

A voltaic cell is constructed using the dichromate and iodide half-reactions in acidic solution: CrX2OX7X2−(aq)+14HX+(aq)+6IX−(aq)→2CrX3+(aq)+3IX2(s)+7HX2O(l)\ce{Cr2O7^2-}(aq) + 14\ce{H+}(aq) + 6\ce{I-}(aq) \rightarrow 2\ce{Cr^3+}(aq) + 3\ce{I2}(s) + 7\ce{H2O}(l). The standard potentials are E∘(CrX2OX7X2−/CrX3+)=+1.33 VE^\circ(\ce{Cr2O7^2-/Cr^3+}) = +1.33\text{ V} and E∘(IX2/IX−)=+0.54 VE^\circ(\ce{I2/I-}) = +0.54\text{ V}. Calculate Ecell∘E^\circ_{\text{cell}} and the equilibrium constant KK at 298 K298\text{ K} using ln⁡K=nFEcell∘RT\ln K = \frac{n F E^\circ_{\text{cell}}}{R T} (where R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}).

Answer

Ecell∘=+0.79 VE^\circ_{\text{cell}} = +0.79\text{ V} and K≈1.3×1080K \approx 1.3 \times 10^{80}. Cathode is dichromate reduction (E∘=+1.33 VE^\circ = +1.33\text{ V}), anode is iodide oxidation (E∘=+0.54 VE^\circ = +0.54\text{ V}). Ecell∘=1.33−0.54=+0.79 VE^\circ_{\text{cell}} = 1.33 - 0.54 = +0.79\text{ V}. Here n=6n = 6 electrons transferred. ln⁡K=(6)(96485)(0.79)(8.314)(298)≈184.6\ln K = \frac{(6)(96485)(0.79)}{(8.314)(298)} \approx 184.6, yielding K=e184.6≈1.3×1080K = e^{184.6} \approx 1.3 \times 10^{80}.

Loading workspace…