Resources

An unknown main-group Period 3 element, XX, exhibits the following successive ionization energies: IE1=786.5 kJ/molIE_1 = 786.5\text{ kJ/mol}, IE2=1577 kJ/molIE_2 = 1577\text{ kJ/mol}, IE3=3232 kJ/molIE_3 = 3232\text{ kJ/mol}, IE4=4356 kJ/molIE_4 = 4356\text{ kJ/mol}, and IE5=16091 kJ/molIE_5 = 16091\text{ kJ/mol}. Identify element XX, state the number of valence electrons in its neutral ground state, and write its full ground-state electron configuration.

Answer and steps

Final answer

Element XX: Silicon (Si\text{Si}); Valence electrons: 44; Electron configuration: 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2

Steps

01

Analyze the successive ionization energies to find the valence electrons

Ionization energy (IEIE) is the energy required to remove an electron from a gaseous atom or ion. Successive ionization energies always increase because each subsequent electron is removed from an increasingly positive ion. However, a dramatic, disproportionate jump occurs when removal shifts from outer-shell (valence) electrons to a tightly bound inner-shell (core) electron:

  • IE1=786.5 kJ/molIE_1 = 786.5\text{ kJ/mol}
  • IE2=1577 kJ/molIE_2 = 1577\text{ kJ/mol}
  • IE3=3232 kJ/molIE_3 = 3232\text{ kJ/mol}
  • IE4=4356 kJ/molIE_4 = 4356\text{ kJ/mol}
  • IE5=16091 kJ/molIE_5 = 16091\text{ kJ/mol}

From IE1IE_1 through IE4IE_4, the values increase steadily as successive electrons are removed from the same outermost principal energy level (n=3n = 3).

Between IE4IE_4 and IE5IE_5, the ionization energy jumps by more than 11700 kJ/mol11700\text{ kJ/mol} (a factor of nearly 3.73.7). This massive increase signifies that the fifth electron is being removed from a stable, inner noble-gas core (n=2n = 2), which experiences a much greater effective nuclear charge and is located much closer to the nucleus.

Therefore, element XX possesses 44 valence electrons.

Common Pitfall: A common mistake is assuming that the large value at IE5IE_5 implies 55 valence electrons. The large jump occurs after all valence electrons have been removed; hence, the index immediately preceding the leap indicates the count of valence electrons (44, not 55).


02

Identify Element XX

  • Element XX is a main-group element in Period 3.
  • Main-group elements with 44 valence electrons belong to Group 14 (Group IVA).
  • The Period 3, Group 14 element has an atomic number of Z=14Z = 14, which corresponds to Silicon (Si\ce{Si}).

03

Determine the ground-state electron configuration

A neutral silicon atom has 1414 electrons. Filling the orbitals in order of increasing energy according to the Aufbau principle:

1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2

  • Element XX: Silicon (Si\ce{Si})
  • Valence electrons: 44
  • Ground-state electron configuration: 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the index of the largest ionization energy jump by assigning valence electrons equal to the ionization step after the jump (IE5) instead of before it, concluding the element has 5 valence electrons (phosphorus).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    IE5−IE4=16091−4356=11735 kJ/molIE_5 - IE_4 = 16091 - 4356 = 11735\text{ kJ/mol}

  2. Step 2

    Largest jump is at IE5IE_5, so there are 55 valence electrons.

    Correct

    A huge jump at IE5IE_5 means the 5th5^{\text{th}} electron is removed from a noble-gas core; therefore, there are 44 valence electrons.

    The massive energy increase at IE5IE_5 signifies that removing the fifth electron breaks into an inner core shell (n=2n=2). Because only the first four electrons reside in the valence shell (n=3n=3), the atom has 44 valence electrons, not 55.

  3. Step 3

    Period 3 element with 55 valence electrons is phosphorus (P\text{P}).

    Correct

    Element XX is in Period 3, Group 14, which is silicon (Si\text{Si}).

    Because this conclusion was based on having 55 valence electrons rather than 44, the element was identified as phosphorus instead of silicon.

  4. Step 4

    55   ⟹  \implies 1s22s22p63s23p31s^2 2s^2 2p^6 3s^2 3p^3

    Correct

    44 valence electrons   ⟹  \implies 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2

    Following from your previous step, you wrote the configuration for phosphorus with 1515 electrons instead of silicon with 1414 electrons.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted IE4IE_4 from IE5IE_5 to pinpoint where the largest numerical surge occurred.

You correctly matched your assumed valence electron count and period to determine a corresponding main-group element and its ground-state electron configuration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ionization energy jump index misinterpretation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the valence electron count with the index after the jump (IEn+1IE_{n+1}) rather than the number of outer electrons successfully removed before the jump (nn). A dramatic spike marks the removal of the first inner-shell (core) electron.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting Ionization Energy Jumps
  • If the dramatic jump occurs between IEnIE_n and IEn+1IE_{n+1}, the first nn electrons are valence electrons, and the (n+1)th(n+1)^{\text{th}} electron is the first core electron.

  • Always take the index before the jump (nn) as the total number of valence electrons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. The large leap occurs between IE4IE_4 and IE5IE_5, showing that the 5th5^{\text{th}} electron is removed from a stable inner shell (n=2n=2).

  2. Because 44 electrons are removed from the valence shell before encountering the core jump, element XX has 44 valence electrons.

  3. A Period 3 element with 44 valence electrons belongs to Group 14 (atomic number Z=14Z = 14), which is silicon (Si\text{Si}).

  4. Write the ground-state electron configuration for neutral silicon (1414 electrons): 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2.

Final answer

Element XX: Silicon (Si\text{Si}); Valence electrons: 44; Electron configuration: 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2

NEXT STEPS
Final Takeaways from Your Teacher
  • When reading successive ionization energy data, draw a dividing line at the giant gap; count only the entries to the left of the line as valence electrons.

  • Practice connecting the valence electron count directly to group numbers for main-group elements in Periods 2 and 3.

OverviewACEpath Teacher's Diagnosis

02 The student focuses on ratio rather than absolute differences and misidentifies the transition from IE2 to IE3 as the core jump because IE3 is more than double IE2, incorrectly identifying the element as magnesium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    IE2=1577 kJ/mol, IE3=3232 kJ/mol  ⟹  IE3 is more than double IE2, showing a jump after 2 electrons.IE_2 = 1577\text{ kJ/mol},\, IE_3 = 3232\text{ kJ/mol} \implies IE_3 \text{ is more than double } IE_2\text{, showing a jump after 2 electrons.}

    Correct

    Between IE4=4356 kJ/molIE_4 = 4356\text{ kJ/mol} and IE5=16091 kJ/molIE_5 = 16091\text{ kJ/mol}, the energy increases by over 11700 kJ/mol11700\text{ kJ/mol} (nearly a 44-fold increase), indicating that the 5th5\text{th} electron is removed from an inner core shell (n=2n=2). Thus, the atom has 44 valence electrons.

    Successive ionization energies naturally increase by a factor of 1.51.5 to 22 within the same valence shell because each electron is removed from a progressively more positive ion. A true core transition involves a drastic, multi-fold jump (here, an increase of >11700 kJ/mol>11700\text{ kJ/mol} from IE4IE_4 to IE5IE_5).

  2. Step 2

    The element has 2 valence electrons and is magnesium (Mg).\text{The element has 2 valence electrons and is magnesium (Mg).}

    Correct

    A Period 3 element with 4 valence electrons belongs to Group 14, which is silicon (Si).\text{A Period 3 element with 4 valence electrons belongs to Group 14, which is silicon (Si).}

    Because you concluded there were 22 valence electrons in Step 1, you identified the element as magnesium instead of silicon.

  3. Step 3

    2  ⟹  1s22s22p63s22 \implies 1s^2 2s^2 2p^6 3s^2

    Correct

    Valence electrons: 4  ⟹  1s22s22p63s23p2\text{Valence electrons: } 4 \implies 1s^2 2s^2 2p^6 3s^2 3p^2

    Your electron configuration was consistent with magnesium (Z=12Z=12), but neutral silicon (Z=14Z=14) has 1414 electrons, ending in 3s23p23s^2 3p^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized the fundamental principle that a dramatic leap in ionization energy reveals the boundary between valence and core electrons.

You correctly determined the identity and ground-state electron configuration corresponding to your count of valence electrons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentified Core Ionization Jump

No

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a doubling of ionization energy within the same principal energy level (n=3n=3) as a core transition, without surveying the full data set to locate the single largest, order-of-magnitude leap (IE4→IE5IE_4 \to IE_5).

REASONING PATH
Your ACEpath teacher’s suggested approach
Locating the Core Jump
  • In successive ionization energy data, calculate the difference and ratio across all adjacent values; the core transition is the single disproportionate leap (often >3×>3\times to 5×5\times larger than the preceding value).

  • Always scan all given ionization energies to find the largest jump before concluding the number of valence electrons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare all consecutive jumps: IE2−IE1=790.5 kJ/molIE_2 - IE_1 = 790.5\text{ kJ/mol}, IE3−IE2=1655 kJ/molIE_3 - IE_2 = 1655\text{ kJ/mol}, IE4−IE3=1124 kJ/molIE_4 - IE_3 = 1124\text{ kJ/mol}, and IE5−IE4=11735 kJ/molIE_5 - IE_4 = 11735\text{ kJ/mol}.

  2. The leap between IE4IE_4 and IE5IE_5 is by far the largest, showing that 44 electrons are in the outer shell and the 5th5\text{th} electron is removed from the n=2n=2 core.

  3. In Period 3, the Group 14 element with 44 valence electrons is silicon (Si\ce{Si}, Z=14Z=14).

  4. Write the full electron configuration for 1414 electrons: 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2.

Final answer

Element XX: Silicon (Si\ce{Si}); Valence electrons: 44; Electron configuration: 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Compare differences between every adjacent pair of ionization energies across the entire data set before choosing the jump point.

  • Remember that removing an electron from a positive ion always causes a moderate increase, but breaking a noble-gas core requires a massive energy jump.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the number of valence electrons with the total atomic number, identifying beryllium (atomic number 4) instead of the Period 3 element with 4 valence electrons.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Large jump between IE4 and IE5 means 4 valence electrons.\text{Large jump between } IE_4 \text{ and } IE_5 \text{ means } 4 \text{ valence electrons.}

  2. Step 2

    Atomic number is 4, which corresponds to beryllium (Be).\text{Atomic number is } 4\text{, which corresponds to beryllium (Be).}

    Correct

    Element X is in Period 3 with 4 valence electrons (Group 14), so Z=14, which is Silicon (Si).\text{Element } X \text{ is in Period } 3 \text{ with } 4 \text{ valence electrons (Group 14), so } Z = 14\text{, which is Silicon (Si).}

    You equated the number of valence electrons (44) with the total atomic number (Z=4Z = 4). Beryllium has 44 total electrons and is in Period 2 with only 22 valence electrons. A main-group element in Period 3 with 44 valence electrons belongs to Group 14, which is silicon (Si\text{Si}).

  3. Step 3

    1s22s21s^2 2s^2

    Correct

    1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2

    Your electron configuration correctly matches beryllium (Z=4Z = 4), but it is affected by the misidentification of element XX in the previous step. Silicon (Z=14Z = 14) has the ground-state electron configuration 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly interpreted the dramatic jump between IE4IE_4 and IE5IE_5 as evidence for 44 valence electrons.

You accurately stated that the neutral atom has 44 valence electrons.

You wrote a valid ground-state electron configuration for the atomic number you selected.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating valence electrons with atomic number

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the count of outermost valence electrons with the total atomic number (ZZ), overlooking the problem constraint that element XX belongs to Period 3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Valence electrons vs. Total atomic number
  • The number of valence electrons is the number of electrons in the outermost shell (ss and pp subshells for main-group elements), not the total number of protons or electrons in the atom (ZZ).

  • Use the period number to find the outermost principal quantum level (n=3n = 3), then use the valence electron count to identify the group (Group 14) and atomic number (Z=14Z = 14).

Period 3 position
  • Elements in Period 3 occupy the third energy level and include Na\text{Na} through Ar\text{Ar} (Z=11Z = 11 to 1818).

  • Always verify that your chosen element is located in the specified period on the periodic table.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the valence electron count (44) to determine that element XX belongs to Group 14 (IVA).

  2. Combine Group 14 with the given condition that XX is a Period 3 element to identify element XX as Silicon (Si\text{Si}), which has atomic number Z=14Z = 14.

  3. Write the full electron configuration for 1414 electrons: 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2.

Final answer

Element XX: Silicon (Si\text{Si}); Valence electrons: 44; Electron configuration: 1s22s22p63s23p21s^2 2s^2 2p^6 3s^2 3p^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to navigate the periodic table by combining period (row) and group (column) information.

  • Practice distinguishing between core electrons, valence electrons, and total atomic number (ZZ).

Lock it in

Similar question

01

An unknown Period 3 element YY has the following successive ionization energies in kJ/mol\text{kJ/mol}: IE1=496IE_1 = 496, IE2=4562IE_2 = 4562, IE3=6910IE_3 = 6910, IE4=9543IE_4 = 9543. Identify element YY and state its number of valence electrons.

Answer

Valence electrons: 11; Element YY: Sodium (Na\text{Na}). The huge jump occurs immediately between IE1IE_1 and IE2IE_2 (a nearly tenfold increase), indicating that only 11 valence electron is present. A Period 3 element with 11 valence electron belongs to Group 1, which is sodium.

02

An unknown main-group element ZZ in Period 3 has successive ionization energies: IE1=578 kJ/molIE_1 = 578\text{ kJ/mol}, IE2=1817 kJ/molIE_2 = 1817\text{ kJ/mol}, IE3=2745 kJ/molIE_3 = 2745\text{ kJ/mol}, IE4=11577 kJ/molIE_4 = 11577\text{ kJ/mol}, and IE5=14842 kJ/molIE_5 = 14842\text{ kJ/mol}. Identify element ZZ and write its full ground-state electron configuration.

Answer

Element ZZ: Aluminum (Al\text{Al}); Electron configuration: 1s22s22p63s23p11s^2 2s^2 2p^6 3s^2 3p^1. The dramatic jump appears between IE3IE_3 and IE4IE_4 (jumping by over 8800 kJ/mol8800\text{ kJ/mol}), showing that the element has 33 valence electrons. In Period 3, Group 13 corresponds to aluminum (Z=13Z = 13), with configuration 1s22s22p63s23p11s^2 2s^2 2p^6 3s^2 3p^1.

03

Explain why the removal of the fifth electron from a neutral silicon atom requires nearly four times as much energy as the fourth electron (IE5=16091 kJ/molIE_5 = 16091\text{ kJ/mol} vs. IE4=4356 kJ/molIE_4 = 4356\text{ kJ/mol}), citing principal quantum levels (nn) and effective nuclear charge (ZeffZ_{\text{eff}}).

Answer

The first four electrons of silicon are removed from the n=3n = 3 valence shell. After these are removed, the Si4+\text{Si}^{4+} ion has a stable neon-like core configuration (1s22s22p61s^2 2s^2 2p^6). The fifth electron must be removed from the n=2n = 2 principal energy level, which has a significantly smaller average radius and experiences much less shielding, resulting in a dramatically higher effective nuclear charge (ZeffZ_{\text{eff}}) and a massive surge in required energy.

Loading workspace…