Resources

A wastewater treatment process removes dissolved copper(II) ions by precipitating insoluble copper(II) hydroxide via the exothermic reaction: Cu2+(aq)+2OH−(aq)→Cu(OH)2(s)\text{Cu}^{2+}(aq) + 2\text{OH}^-(aq) \rightarrow \text{Cu}(\text{OH})_2(s), with ΔHrxn∘=−54.4 kJ/mol\Delta H_{\text{rxn}}^\circ = -54.4\text{ kJ/mol}. An industrial retention basin receives an effluent stream where the concentration of Cu2+\text{Cu}^{2+} is reported as 381 mg/L381\text{ mg/L}. If 2.50×103 L2.50\times 10^3\text{ L} of this effluent is treated with stoichiometric sodium hydroxide, calculate: (a) the total amount of substance of Cu2+\text{Cu}^{2+} precipitated in moles, and (b) the total quantity of thermal energy released into the aqueous surroundings, expressed in megajoules (MJ\text{MJ}).

Answer and steps

Final answer

(a) nCu2+=15.0 moln_{\text{Cu}^{2+}} = 15.0\text{ mol}; (b) qsurr=0.816 MJq_{\text{surr}} = 0.816\text{ MJ} (or ΔH=−0.816 MJ\Delta H = -0.816\text{ MJ})

Steps

Part (a): Determining the Moles of CuX2+\ce{Cu^{2+}} Precipitated

  1. Calculate the total mass of dissolved CuX2+\ce{Cu^{2+}}: The effluent stream has a concentration of 381 mg/L381\text{ mg/L} and a total volume of 2.50×103 L2.50 \times 10^3\text{ L}. Mass of CuX2+=(381 mg/L)⋅(2.50×103 L)=9.525×105 mg\text{Mass of }\ce{Cu^{2+}} = (381\text{ mg/L}) \cdot (2.50 \times 10^3\text{ L}) = 9.525 \times 10^5\text{ mg}

    Convert milligrams to grams: 9.525×105 mg⋅1 g1000 mg=952.5 g9.525 \times 10^5\text{ mg} \cdot \frac{1\text{ g}}{1000\text{ mg}} = 952.5\text{ g}

  2. Convert mass to moles using molar mass: The standard atomic weight of copper (Cu\ce{Cu}) is approximately 63.55 g/mol63.55\text{ g/mol}. nCuX2+=massmolar mass=952.5 g63.55 g/mol≈14.99 mol≈15.0 moln_{\ce{Cu^{2+}}} = \frac{\text{mass}}{\text{molar mass}} = \frac{952.5\text{ g}}{63.55\text{ g/mol}} \approx 14.99\text{ mol} \approx 15.0\text{ mol}

    Since stoichiometric hydroxide is added, all dissolved CuX2+\ce{Cu^{2+}} precipitates completely as Cu(OH)X2(s)\ce{Cu(OH)2(s)}. nCuX2+=15.0 moln_{\ce{Cu^{2+}}} = 15.0\text{ mol}


Part (b): Calculating the Thermal Energy Released

  1. Relate enthalpy change to the reaction stoichiometry: The balanced equation shows that 1 mol1\text{ mol} of CuX2+\ce{Cu^{2+}} reacts to release 54.4 kJ54.4\text{ kJ} of energy (ΔHrxn∘=−54.4 kJ/mol\Delta H^\circ_{\text{rxn}} = -54.4\text{ kJ/mol}): ΔH=n⋅ΔHrxn∘=14.99 mol⋅(−54.4 kJ/mol)=−815.4 kJ\Delta H = n \cdot \Delta H^\circ_{\text{rxn}} = 14.99\text{ mol} \cdot (-54.4\text{ kJ/mol}) = -815.4\text{ kJ} Using the rounded value of 15.0 mol15.0\text{ mol}: ΔH=15.0 mol⋅(−54.4 kJ/mol)=−816 kJ\Delta H = 15.0\text{ mol} \cdot (-54.4\text{ kJ/mol}) = -816\text{ kJ}
  2. Convert to megajoules (MJ\text{MJ}) and interpret the sign: Convert kilojoules (kJ\text{kJ}) to megajoules (MJ\text{MJ}), where 1 MJ=1000 kJ1\text{ MJ} = 1000\text{ kJ}: ΔH=−816 kJ1000 kJ/MJ=−0.816 MJ\Delta H = \frac{-816\text{ kJ}}{1000\text{ kJ/MJ}} = -0.816\text{ MJ}

    • Pitfall note: The negative sign on ΔH\Delta H indicates an exothermic reaction (the chemical system loses energy). By the first law of thermodynamics, heat lost by the system is absorbed by the surroundings: qsurr=−ΔH=−(−0.816 MJ)=0.816 MJq_{\text{surr}} = -\Delta H = -(-0.816\text{ MJ}) = 0.816\text{ MJ}

    Therefore, the total thermal energy released into the aqueous surroundings is 0.816 MJ0.816\text{ MJ} (corresponding to ΔH=−0.816 MJ\Delta H = -0.816\text{ MJ}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milligrams to grams when calculating moles, resulting in an answer that is 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass of CuX2+=381 mg/L×2500 L=952500 mg\text{mass of }\ce{Cu^{2+}} = 381\text{ mg/L} \times 2500\text{ L} = 952500\text{ mg}

  2. Step 2

    n(CuX2+)=95250063.55=15000 moln(\ce{Cu^{2+}}) = \frac{952500}{63.55} = 15000\text{ mol}

    Correct

    n(CuX2+)=952.5 g63.55 g/mol≈15.0 moln(\ce{Cu^{2+}}) = \frac{952.5\text{ g}}{63.55\text{ g/mol}} \approx 15.0\text{ mol}

    You divided a mass in milligrams (952500 mg952500\text{ mg}) directly by the molar mass in grams per mole (63.55 g/mol63.55\text{ g/mol}) without converting milligrams to grams first. Dividing milligrams by g/mol\text{g/mol} gives millimoles (15000 mmol15000\text{ mmol}), which equals 15.0 mol15.0\text{ mol}.

  3. Step 3

    energy released=15000 mol×54.4 kJ/mol=816000 kJ  ⟹  816000 kJ=816 MJ\text{energy released} = 15000\text{ mol} \times 54.4\text{ kJ/mol} = 816000\text{ kJ} \implies 816000\text{ kJ} = 816\text{ MJ}

    Correct

    qsurr=15.0 mol×54.4 kJ/mol=816 kJ  ⟹  816 kJ=0.816 MJq_{\text{surr}} = 15.0\text{ mol} \times 54.4\text{ kJ/mol} = 816\text{ kJ} \implies 816\text{ kJ} = 0.816\text{ MJ}

    Your formula and unit conversion from kilojoules to megajoules were correct, but the numerical answer inherited the factor-of-10001000 error from your mole calculation in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total mass of dissolved copper(II) ions from the given volume and concentration.

You correctly multiplied the amount of substance by the enthalpy of reaction to find the total thermal energy released.

You correctly converted kilojoules to megajoules using the factor of 1000 kJ/MJ1000\text{ kJ/MJ}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission (Mass)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated mass in milligrams as if it were in grams when applying n=mMn = \frac{m}{M}, forgetting that molar mass is standardized in grams per mole (g/mol\text{g/mol}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match mass units before using molar mass
  • Because molar mass has units of g/mol\text{g/mol}, the mass in n=mMn = \frac{m}{M} must always be expressed in grams (g\text{g}).

  • Whenever mass is given or calculated in milligrams (mg\text{mg}), divide by 10001000 to convert to grams before dividing by molar mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the total mass of CuX2+\ce{Cu^{2+}} from milligrams to grams: m=952500 mg×1 g1000 mg=952.5 gm = 952500\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 952.5\text{ g}.

  2. Calculate the amount of substance in moles using the molar mass of copper: n=952.5 g63.55 g/mol≈15.0 moln = \frac{952.5\text{ g}}{63.55\text{ g/mol}} \approx 15.0\text{ mol}.

  3. Calculate the total energy released into the surroundings: qsurr=15.0 mol×54.4 kJ/mol=816 kJq_{\text{surr}} = 15.0\text{ mol} \times 54.4\text{ kJ/mol} = 816\text{ kJ}.

  4. Convert the energy to megajoules: qsurr=816 kJ1000 kJ/MJ=0.816 MJq_{\text{surr}} = \frac{816\text{ kJ}}{1000\text{ kJ/MJ}} = 0.816\text{ MJ}.

Final answer

(a) nCuX2+=15.0 moln_{\ce{Cu^{2+}}} = 15.0\text{ mol}; (b) qsurr=0.816 MJq_{\text{surr}} = 0.816\text{ MJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include explicit units in every intermediate fraction (for example, write 952500 mg63.55 g/mol\frac{952500\text{ mg}}{63.55\text{ g/mol}}) to immediately spot unit mismatches.

  • Check that your final answer magnitude is physically reasonable for industrial chemical operations.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets stoichiometric coefficients and multiplies the enthalpy of reaction by 2 because of the 2 OH⁻ in the balanced equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mass of CuX2+=381 mg/L×2500 L=952.5 g  ⟹  n(CuX2+)=952.5 g63.55 g/mol=15.0 mol\text{mass of }\ce{Cu^{2+}} = 381\text{ mg/L} \times 2500\text{ L} = 952.5\text{ g} \implies n(\ce{Cu^{2+}}) = \frac{952.5\text{ g}}{63.55\text{ g/mol}} = 15.0\text{ mol}

  2. Step 2

    ΔH per reaction with 2 OHX−=2×54.4 kJ/mol=108.8 kJ/mol\Delta H\text{ per reaction with } 2\,\ce{OH^-} = 2 \times 54.4\text{ kJ/mol} = 108.8\text{ kJ/mol}

    Correct

    ΔH=nCuX2+×ΔHrxn∘=15.0 mol×(−54.4 kJ/mol)\Delta H = n_{\ce{Cu^{2+}}} \times \Delta H^\circ_{\text{rxn}} = 15.0\text{ mol} \times (-54.4\text{ kJ/mol})

    The standard enthalpy of reaction, ΔHrxn∘=−54.4 kJ/mol\Delta H^\circ_{\text{rxn}} = -54.4\text{ kJ/mol}, already corresponds to the balanced equation as written (that is, per 1 mol1\text{ mol} of CuX2+\ce{Cu^{2+}} reacting with 2 mol2\text{ mol} of OHX−\ce{OH^-}). Multiplying by 2 incorrectly scales the reaction enthalpy.

  3. Step 3

    energy released=15.0 mol×108.8 kJ/mol=1632 kJ  ⟹  1632 kJ=1.63 MJ\text{energy released} = 15.0\text{ mol} \times 108.8\text{ kJ/mol} = 1632\text{ kJ} \implies 1632\text{ kJ} = 1.63\text{ MJ}

    Correct

    qsurr=−ΔH=15.0 mol×54.4 kJ/mol=816 kJ=0.816 MJq_{\text{surr}} = -\Delta H = 15.0\text{ mol} \times 54.4\text{ kJ/mol} = 816\text{ kJ} = 0.816\text{ MJ}

    Your unit conversion from kilojoules to megajoules was carried out properly, but the numerical value was doubled due to the error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted concentration and volume into the total mass of copper ions.

You correctly used the molar mass of copper to determine the moles of CuX2+\ce{Cu^{2+}}.

You correctly identified the unit conversion factor between kilojoules and megajoules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Enthalpy Scaling Misconception

You noticed the stoichiometric coefficient of 2 in front of OHX−\ce{OH^-} and multiplied ΔHrxn∘\Delta H^\circ_{\text{rxn}} by 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the given ΔHrxn∘\Delta H^\circ_{\text{rxn}} as an energy term per individual ion rather than per stoichiometric mole of the balanced equation. In thermochemical equations, the units kJ/mol\text{kJ/mol} mean 'kilojoules per mole of reaction event', which already incorporates the stoichiometric amounts of all reactants and products shown in the equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Meaning of 'per mole of reaction'
  • ΔHrxn∘\Delta H^\circ_{\text{rxn}} is given per stoichiometric mole of the reaction as written, meaning per 1 mol1\text{ mol} of CuX2+\ce{Cu^{2+}}, per 2 mol2\text{ mol} of OHX−\ce{OH^-}, and per 1 mol1\text{ mol} of Cu(OH)X2\ce{Cu(OH)2} formed.

  • Do not multiply ΔHrxn∘\Delta H^\circ_{\text{rxn}} by any stoichiometric coefficient when relating it to the moles of a substance whose coefficient is 1.

Calculating Enthalpy from Moles
  • For a substance with stoichiometric coefficient νi\nu_i, the total enthalpy change is ΔH=niνiΔHrxn∘\Delta H = \frac{n_i}{\nu_i} \Delta H^\circ_{\text{rxn}}.

  • Divide the reacting moles of substance ii by its coefficient νi\nu_i before multiplying by ΔHrxn∘\Delta H^\circ_{\text{rxn}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that νCuX2+=1\nu_{\ce{Cu^{2+}}} = 1, so 15.0 mol15.0\text{ mol} of CuX2+\ce{Cu^{2+}} corresponds to 15.0 mol15.0\text{ mol} of reaction events.

  2. Compute total enthalpy change: ΔH=15.0 mol×(−54.4 kJ/mol)=−816 kJ\Delta H = 15.0\text{ mol} \times (-54.4\text{ kJ/mol}) = -816\text{ kJ}.

  3. Convert to megajoules: ΔH=−816 kJ1000 kJ/MJ=−0.816 MJ\Delta H = \frac{-816\text{ kJ}}{1000\text{ kJ/MJ}} = -0.816\text{ MJ}.

  4. Determine thermal energy released to surroundings: qsurr=−ΔH=0.816 MJq_{\text{surr}} = -\Delta H = 0.816\text{ MJ}.

Final answer

(a) nCuX2+=15.0 moln_{\ce{Cu^{2+}}} = 15.0\text{ mol}; (b) qsurr=0.816 MJq_{\text{surr}} = 0.816\text{ MJ} (or ΔH=−0.816 MJ\Delta H = -0.816\text{ MJ})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of 'mole of reaction' in thermochemistry.

  • Practice using the formula q=nνΔHrxn∘q = \frac{n}{\nu} \Delta H^\circ_{\text{rxn}} when given different reactants in an equation.

  • Work through reactions where stoichiometric coefficients are greater than 1 to ensure coefficients are divided, not multiplied.

OverviewACEpath Teacher's Diagnosis

03 The student divides the mass of Cu²⁺ by the molar mass of Cu(OH)₂ instead of Cu²⁺ when finding the moles of copper ions in the effluent.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass of Cu2+=381 mg/L×2500 L=952.5 g\text{mass of }\text{Cu}^{2+} = 381\text{ mg/L} \times 2500\text{ L} = 952.5\text{ g}

  2. Step 2

    molar mass of Cu(OH)2=63.55+2×(16.00+1.01)=97.57 g/mol  ⟹  n(Cu2+)=952.5 g97.57 g/mol=9.76 mol\text{molar mass of }\text{Cu(OH)}_2 = 63.55 + 2 \times (16.00 + 1.01) = 97.57\text{ g/mol} \implies n(\text{Cu}^{2+}) = \frac{952.5\text{ g}}{97.57\text{ g/mol}} = 9.76\text{ mol}

    Correct

    n(Cu2+)=952.5 g63.55 g/mol≈15.0 moln(\text{Cu}^{2+}) = \frac{952.5\text{ g}}{63.55\text{ g/mol}} \approx 15.0\text{ mol}

    You used the molar mass of the product Cu(OH)2\text{Cu(OH)}_2 (97.57 g/mol97.57\text{ g/mol}) instead of the molar mass of the solute Cu2+\text{Cu}^{2+} (63.55 g/mol63.55\text{ g/mol}). Because the 952.5 g952.5\text{ g} represents dissolved Cu2+\text{Cu}^{2+}, you must divide by the molar mass of copper alone.

  3. Step 3

    energy released=9.76 mol×54.4 kJ/mol=531 kJ  ⟹  531 kJ=0.531 MJ\text{energy released} = 9.76\text{ mol} \times 54.4\text{ kJ/mol} = 531\text{ kJ} \implies 531\text{ kJ} = 0.531\text{ MJ}

    Correct

    qsurr=15.0 mol×54.4 kJ/mol=816 kJ=0.816 MJq_{\text{surr}} = 15.0\text{ mol} \times 54.4\text{ kJ/mol} = 816\text{ kJ} = 0.816\text{ MJ}

    Your conversion method and unit conversion from kJ\text{kJ} to MJ\text{MJ} were logically sound, but the numerical answer was affected by the incorrect mole count from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total mass of dissolved copper(II) ions from concentration and volume.

You properly applied the relationship between reaction moles, enthalpy of reaction, and unit conversion to megajoules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Molar Mass in Solute-to-Mole Conversion

You divided the mass of dissolved Cu2+\text{Cu}^{2+} by the molar mass of Cu(OH)2\text{Cu(OH)}_2 instead of Cu2+\text{Cu}^{2+}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the chemical identity of the given solute mass with the chemical identity of the precipitated solid.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Mass to Chemical Identity
  • When converting mass to moles, always divide by the molar mass of the exact chemical species that the mass represents.

  • Check the label on your mass: if it is mass of Cu2+\text{Cu}^{2+}, use M(Cu)=63.55 g/molM(\text{Cu}) = 63.55\text{ g/mol}, not the formula weight of the precipitate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. n(Cu2+)=952.5 g63.55 g/mol=14.99 mol≈15.0 moln(\text{Cu}^{2+}) = \frac{952.5\text{ g}}{63.55\text{ g/mol}} = 14.99\text{ mol} \approx 15.0\text{ mol}

  2. qsurr=14.99 mol×54.4 kJ/mol=815.4 kJq_{\text{surr}} = 14.99\text{ mol} \times 54.4\text{ kJ/mol} = 815.4\text{ kJ}

  3. qsurr=815.4 kJ1000 kJ/MJ≈0.816 MJq_{\text{surr}} = \frac{815.4\text{ kJ}}{1000\text{ kJ/MJ}} \approx 0.816\text{ MJ}

Final answer

(a) nCu2+=15.0 moln_{\text{Cu}^{2+}} = 15.0\text{ mol}; (b) qsurr=0.816 MJq_{\text{surr}} = 0.816\text{ MJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before dividing mass by molar mass, explicitly write the formula of the substance whose mass you measured (e.g., mCu2+m_{\text{Cu}^{2+}}).

  • Verify that stoichiometry is applied at the mole stage rather than trying to account for precipitation products during the initial mole calculation.

Lock it in

Similar question

01

An industrial rinse tank contains 500 L500\text{ L} of wastewater with a nickel(II) ion concentration of 117.4 mg/L117.4\text{ mg/L}. Calculate the total amount of NiX2+\ce{Ni^{2+}} present in moles. (M(Ni)=58.69 g/molM(\ce{Ni}) = 58.69\text{ g/mol})

Answer

1.00 mol1.00\text{ mol}. Calculate mass: 117.4 mg/L×500 L=58700 mg117.4\text{ mg/L} \times 500\text{ L} = 58700\text{ mg}. Convert to grams: 58700 mg÷1000=58.7 g58700\text{ mg} \div 1000 = 58.7\text{ g}. Calculate moles: n=58.7 g58.69 g/mol≈1.00 moln = \frac{58.7\text{ g}}{58.69\text{ g/mol}} \approx 1.00\text{ mol}.

02

A neutralization process treats 1.20×104 L1.20 \times 10^4\text{ L} of acidic runoff containing 490 mg/L490\text{ mg/L} of sulfuric acid (HX2SOX4\ce{H2SO4}, M=98.08 g/molM = 98.08\text{ g/mol}). The neutralization reaction releases 114 kJ114\text{ kJ} per mole of HX2SOX4\ce{H2SO4}. Calculate the total thermal energy released, expressed in megajoules (MJ\text{MJ}).

Answer

6.84 MJ6.84\text{ MJ}. Total mass =490 mg/L×12000 L=5.88×106 mg=5880 g= 490\text{ mg/L} \times 12000\text{ L} = 5.88 \times 10^6\text{ mg} = 5880\text{ g}. Moles n=5880 g98.08 g/mol=60.0 moln = \frac{5880\text{ g}}{98.08\text{ g/mol}} = 60.0\text{ mol}. Total heat released =60.0 mol×114 kJ/mol=6840 kJ=6.84 MJ= 60.0\text{ mol} \times 114\text{ kJ/mol} = 6840\text{ kJ} = 6.84\text{ MJ}.

03

The precipitation of lead(II) iodide, PbX2+(aq)+2 IX−(aq)→PbIX2(s)\ce{Pb^{2+}(aq) + 2I^-(aq) -> PbI2(s)}, has an enthalpy change of ΔH∘=−62.0 kJ/mol\Delta H^\circ = -62.0\text{ kJ/mol}. A wastewater stream contains 82.88 mg/L82.88\text{ mg/L} of dissolved PbX2+\ce{Pb^{2+}} (M=207.2 g/molM = 207.2\text{ g/mol}). What volume of this stream, in liters, must react completely to release exactly 2.48 kJ2.48\text{ kJ} of thermal energy?

Answer

100 L100\text{ L}. Moles required: n=2.48 kJ62.0 kJ/mol=0.0400 moln = \frac{2.48\text{ kJ}}{62.0\text{ kJ/mol}} = 0.0400\text{ mol}. Mass of lead required: m=0.0400 mol×207.2 g/mol=8.288 g=8288 mgm = 0.0400\text{ mol} \times 207.2\text{ g/mol} = 8.288\text{ g} = 8288\text{ mg}. Volume needed: V=8288 mg82.88 mg/L=100 LV = \frac{8288\text{ mg}}{82.88\text{ mg/L}} = 100\text{ L}.

Loading workspace…