Resources

A student measures the diameter of a spherical gold nanoparticle as d=10.4 nmd = 10.4\text{ nm} and calculates its volume using V=43πr3=43π(10.4 nm2)3V = \frac{4}{3}\pi r^3 = \frac{4}{3}\pi \left(\frac{10.4\text{ nm}}{2}\right)^3. The student argues that because 43\frac{4}{3} and 22 appear as fractions and small whole numbers, they introduce uncertainty that limits the result to 11 significant figure, while another student argues that using the calculator's stored value for π\pi introduces experimental error. Classify the status of the formula constants (44, 33, 22, and π\pi), and determine the correct volume of the nanoparticle in nm3\text{nm}^3 with appropriate significant figures.

Answer and steps

Final answer

The numbers 44, 33, and 22 are exact mathematical integers, and π\pi is an exact irrational mathematical constant; none of them limit significant figures. The only measured value is the diameter (10.4 nm10.4\text{ nm}, 33 significant figures, giving radius r=5.20 nmr = 5.20\text{ nm}). Thus, V=43π(5.20 nm)3=589 nm3V = \frac{4}{3}\pi(5.20\text{ nm})^3 = 589\text{ nm}^3 (33 significant figures).

Steps

01

Distinguish Exact Numbers from Measured Numbers

In scientific calculations, values fall into two distinct categories:

  • Measured numbers: Obtained through experimental measurement using instruments. They always possess experimental uncertainty, and their precision is reflected by their number of significant figures. Here, the diameter d=10.4 nmd = 10.4\text{ nm} is a measured value containing 33 significant figures.
  • Exact numbers: Arise from exact definitions, whole-item counts, or pure mathematical derivations. Exact numbers have an infinite number of significant figures (∞\infty sig figs) and therefore never limit the number of significant figures in a calculation.

02

Classify the Formula Constants (44, 33, 22, and π\pi)

  • The integers 44 and 33: Arise directly from the geometric derivation (integration) of the volume of a sphere. They are exact mathematical integers (43=4.000…3.000…\frac{4}{3} = \frac{4.000\dots}{3.000\dots}).
  • The integer 22: Originates from the exact definition of a radius as half of a diameter (r=d2r = \frac{d}{2}). It is an exact conversion factor and does not limit precision.
  • The constant π\pi: A fundamental mathematical constant defined as the ratio of a circle's circumference to its diameter (π≈3.14159265…\pi \approx 3.14159265\dots). It is an exact irrational number, not an experimental measurement. Using π\pi from a calculator provides precision far beyond that of any physical measurement and introduces no experimental error.

Therefore, none of the formula constants limit the significant figures of the calculated volume.


03

Calculate the Nanoparticle Volume

First, calculate the radius from the measured diameter:

r=d2=10.4 nm2=5.20 nmr = \frac{d}{2} = \frac{10.4\text{ nm}}{2} = 5.20\text{ nm}

Because the divisor 22 is exact, the radius retains all 33 significant figures of the measured diameter.

Next, compute the volume using the spherical volume formula:

V=43πr3=43π(5.20 nm)3V = \frac{4}{3}\pi r^3 = \frac{4}{3}\pi (5.20\text{ nm})^3

V≈43π(140.608 nm3)≈588.978 nm3V \approx \frac{4}{3}\pi (140.608\text{ nm}^3) \approx 588.978\text{ nm}^3

Rounding to 33 significant figures to match the measured value:

V=589 nm3V = 589\text{ nm}^3


Pitfall to Avoid

Do not confuse simple integers or fractions in geometric formulas (such as 22 or 43\frac{4}{3}) with measurements rounded to 11 digit. Always check the origin of a number: if it is part of a mathematical definition or geometric formula, treat it as exact with infinite significant figures.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the geometric integers 4, 3, and 2 as measured values with 1 significant figure and inappropriately rounds the final volume to 1 significant figure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    4, 3, and 2 are measured integers with 1 significant figure, and π\pi is an approximation. They limit the calculation to 1 significant figure.

    Correct

    The numbers 44, 33, and 22 are exact mathematical integers, and π\pi is an exact irrational constant. None of them limit significant figures.

    Formula coefficients from geometric derivations (44 and 33) and definitional conversion factors (22, since r=d/2r = d/2) are exact numbers with infinite significant figures. Likewise, π\pi is an exact mathematical constant, not a measured quantity with experimental uncertainty. Therefore, none of these numbers limit the precision of the calculation.

  2. Step 2

    r=10.4 nm/2=5.2 nmr = 10.4\text{ nm} / 2 = 5.2\text{ nm}

    Correct

    r=10.4 nm2=5.20 nmr = \frac{10.4\text{ nm}}{2} = 5.20\text{ nm}

    Because the divisor 22 is an exact definitional integer (vert∞ vert \infty significant figures), dividing the measured diameter of 10.4 nm10.4\text{ nm} (33 significant figures) preserves all 33 significant figures, giving r=5.20 nmr = 5.20\text{ nm}.

  3. Step 3

    V=(4/3)×π×(5.2 nm)3=588.98 nm3  ⟹  V=600 nm3V = (4/3) \times \pi \times (5.2\text{ nm})^3 = 588.98\text{ nm}^3 \implies V = 600\text{ nm}^3

    Correct

    V=43π(5.20 nm)3≈588.978 nm3  ⟹  V=589 nm3V = \frac{4}{3}\pi (5.20\text{ nm})^3 \approx 588.978\text{ nm}^3 \implies V = 589\text{ nm}^3

    Because the only measured quantity is the diameter with 33 significant figures, the final volume must be rounded to 33 significant figures, yielding 589 nm3589\text{ nm}^3.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct spherical volume formula V=43πr3V = \frac{4}{3}\pi r^3.

You correctly related the diameter to the radius by dividing by 22.

You performed the numerical arithmetic correctly to find the unrounded volume of approximately 588.98 nm3588.98\text{ nm}^3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Exact vs. measured number confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You classified integers and mathematical constants within geometric formulas as measured values, assuming that any single-digit number possesses only 1 significant figure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exact Numbers vs. Measured Numbers
  • Exact numbers arise from definitions, counts, or pure mathematical formulas and possess infinitely many significant figures; only experimental measurements carry uncertainty.

  • Always identify where a number comes from: if it is defined by a formula (such as 43\frac{4}{3}, 22, or π\pi), never use it to restrict the significant figures of your final result.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify 44, 33, and 22 as exact integers (infinite significant figures) and π\pi as an exact mathematical constant.

  2. Identify the measured diameter d=10.4 nmd = 10.4\text{ nm} as having 33 significant figures.

  3. Compute radius r=10.4 nm2=5.20 nmr = \frac{10.4\text{ nm}}{2} = 5.20\text{ nm}, retaining 33 significant figures.

  4. Calculate volume V=43π(5.20 nm)3≈588.978 nm3V = \frac{4}{3}\pi (5.20\text{ nm})^3 \approx 588.978\text{ nm}^3 and round to 33 significant figures.

Final answer

V=589 nm3V = 589\text{ nm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Before rounding any calculation, write down which quantities are experimentally measured and which are exact formula constants or definitions.

  • Practice identifying exact numbers in other common formulas, such as perimeter (P=2l+2wP = 2l + 2w), kinetic energy (Ek=12mv2E_k = \frac{1}{2}mv^2), and unit conversions (1 in=2.54 cm1\text{ in} = 2.54\text{ cm}).

OverviewACEpath Teacher's Diagnosis

02 The student forgets to divide the diameter by 2, substituting the diameter directly in place of the radius in the volume formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    4, 3, and 2 are exact formula constants, and π\pi is an exact mathematical constant. They do not limit significant figures or introduce experimental uncertainty.

  2. Step 2

    V=(43)×π×(10.4 nm)3V = \left(\frac{4}{3}\right) \times \pi \times (10.4\text{ nm})^3

    Correct

    V=43πr3=43π(5.20 nm)3V = \frac{4}{3}\pi r^3 = \frac{4}{3}\pi (5.20\text{ nm})^3

    You used the given diameter d=10.4 nmd = 10.4\text{ nm} directly in place of the radius rr. The radius is half the diameter, so r=10.4 nm2=5.20 nmr = \frac{10.4\text{ nm}}{2} = 5.20\text{ nm}.

  3. Step 3

    V=4711.8 nm3  ⟹  V=4710 nm3V = 4711.8\text{ nm}^3 \implies V = 4710\text{ nm}^3

    Correct

    V≈588.98 nm3  ⟹  V=589 nm3V \approx 588.98\text{ nm}^3 \implies V = 589\text{ nm}^3

    Your rounding to 3 significant figures was technically consistent with using 10.4 nm10.4\text{ nm}, but the numerical value was too large by a factor of 23=82^3 = 8 due to using diameter instead of radius.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified 44, 33, 22, and π\pi as exact numbers that do not limit significant figures.

You recognized that the measured value contains 33 significant figures and correctly applied 33 significant figures to your final rounded result.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius vs. diameter substitution error

You substituted the diameter dd directly into the volume formula V=43πr3V = \frac{4}{3}\pi r^3 instead of using the radius rr.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the definition of the variable rr in geometric formulas when given diameter data.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Formula Variable
  • The standard volume of a sphere formula is written in terms of radius: V=43πr3V = \frac{4}{3}\pi r^3.

  • Whenever a problem states a diameter dd, explicitly write down r=d2r = \frac{d}{2} as your first step before substituting.

Exact Divisor in Radius Conversion
  • The 22 in r=d2r = \frac{d}{2} is an exact definition, so it never reduces significant figures.

  • Keep the exact number of significant figures from the measured diameter: 10.4 nm/2=5.20 nm10.4\text{ nm} / 2 = 5.20\text{ nm} (3 sig figs).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the radius: r=d2=10.4 nm2=5.20 nmr = \frac{d}{2} = \frac{10.4\text{ nm}}{2} = 5.20\text{ nm}.

  2. Substitute r=5.20 nmr = 5.20\text{ nm} into the formula: V=43π(5.20 nm)3V = \frac{4}{3}\pi (5.20\text{ nm})^3.

  3. Compute the unrounded volume: V≈588.978 nm3V \approx 588.978\text{ nm}^3.

  4. Round to 33 significant figures to match the measured diameter: V=589 nm3V = 589\text{ nm}^3.

Final answer

589 nm3589\text{ nm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out r=d/2r = d / 2 explicitly before writing any geometric formula involving spheres or circles.

  • Practice checking whether given values are diameters or radii before plugging them into formulas.

OverviewACEpath Teacher's Diagnosis

03 The student approximates π as 3.14 with 3 significant figures, but then squares the radius instead of cubing it when applying the volume formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    4, 3, and 2 are exact integers, and π\pi is a mathematical constant that introduces no experimental uncertainty.

  2. Step 2

    r=10.4 nm2=5.20 nmr = \frac{10.4\text{ nm}}{2} = 5.20\text{ nm}

  3. Step 3

    V=(43)×π×(5.20 nm)2  ⟹  V=(43)×3.1416×27.04 nm2=113.26 nm3V = \left(\frac{4}{3}\right) \times \pi \times (5.20\text{ nm})^2 \implies V = \left(\frac{4}{3}\right) \times 3.1416 \times 27.04\text{ nm}^2 = 113.26\text{ nm}^3

    Correct

    V=43πr3=43π(5.20 nm)3≈588.98 nm3V = \frac{4}{3}\pi r^3 = \frac{4}{3}\pi (5.20\text{ nm})^3 \approx 588.98\text{ nm}^3

    You substituted the radius with an exponent of 22 rather than 33. The volume of a sphere requires cubing the radius: r3=(5.20 nm)3=140.608 nm3r^3 = (5.20\text{ nm})^3 = 140.608\text{ nm}^3.

  4. Step 4

    V=113 nm3V = 113\text{ nm}^3

    Correct

    V=589 nm3V = 589\text{ nm}^3

    Your rounding to 33 significant figures was appropriate for your intermediate value, but the numerical answer is incorrect due to the formula exponent error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the geometric coefficients and π\pi as exact values that do not limit significant figures.

You maintained the correct precision of 33 significant figures when calculating the radius.

You recognized that the final answer must be rounded to 33 significant figures based on the measured diameter.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula transcription error (squared radius instead of cubed)

You wrote r2r^2 instead of r3r^3 in the sphere volume formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the two-dimensional area formula (A=πr2A = \pi r^2) or surface area factors with the three-dimensional volume formula (V=43πr3V = \frac{4}{3}\pi r^3). Checking units during calculation provides an immediate safeguard: squaring nm\text{nm} yields nm2\text{nm}^2, which cannot represent a volume.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula Verification
  • The volume of a sphere is V=43πr3V = \frac{4}{3}\pi r^3, where the linear dimension is raised to the third power.

  • Always double-check that volume formulas contain a cubic length term (r3r^3) rather than an area term (r2r^2).

Unit Dimensionality Check
  • Every algebraic step must maintain dimensional consistency: ([length])3=[volume]([\text{length}])^3 = [\text{volume}].

  • Notice that (5.20 nm)2=27.04 nm2(5.20\text{ nm})^2 = 27.04\text{ nm}^2 produces square nanometers, signaling a missing factor of radius before converting to volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Cube the radius: (5.20 nm)3=140.608 nm3(5.20\text{ nm})^3 = 140.608\text{ nm}^3.

  2. Multiply by 43π\frac{4}{3}\pi: V=43×π×140.608 nm3≈588.978 nm3V = \frac{4}{3} \times \pi \times 140.608\text{ nm}^3 \approx 588.978\text{ nm}^3.

  3. Round to 33 significant figures to match the measured diameter (10.4 nm10.4\text{ nm}).

Final answer

V=589 nm3V = 589\text{ nm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform dimensional analysis on intermediate terms: ensure that units evaluate to nm3\text{nm}^3 through the algebra rather than writing nm3\text{nm}^3 after squaring.

  • Review standard geometric formulas for three-dimensional shapes (V=43πr3V = \frac{4}{3}\pi r^3, Asurface=4πr2A_{\text{surface}} = 4\pi r^2) to avoid mixing power exponents.

Lock it in

Similar question

01

A cylindrical wire has a measured length of L=15.20 cmL = 15.20\text{ cm} and a measured diameter of d=0.400 cmd = 0.400\text{ cm}. Using the formula V=π(d2)2LV = \pi \left(\frac{d}{2}\right)^2 L, calculate the volume in cm3\text{cm}^3 with the correct number of significant figures.

Answer

V=1.91 cm3V = 1.91\text{ cm}^3. The factor 22 and constant π\pi are exact; the diameter (33 sig figs) and length (44 sig figs) limit the calculation to 33 sig figs (V=π(0.200 cm)2(15.20 cm)=1.91008… cm3V = \pi(0.200\text{ cm})^2(15.20\text{ cm}) = 1.91008\dots\text{ cm}^3).

02

A student determines the average mass of 33 identical iron pellets. The combined mass on a digital balance reads 14.862 g14.862\text{ g}. Calculate the average mass of one pellet to the appropriate number of significant figures.

Answer

Average mass =4.9540 g= 4.9540\text{ g}. The pellet count (33) is an exact whole-number count (infinite sig figs), so the result maintains the 55 significant figures of the measured mass (14.862 g/314.862\text{ g} / 3).

03

The speed of an electron is calculated using v=2Ekmv = \sqrt{\frac{2E_k}{m}}. If Ek=4.50×10−18 JE_k = 4.50 \times 10^{-18}\text{ J} (measured, 33 sig figs) and m=9.109×10−31 kgm = 9.109 \times 10^{-31}\text{ kg} (measured physical constant, 44 sig figs), state how many significant figures the final calculated speed should have, and compute vv in m/s\text{m/s}.

Answer

v=3.14×106 m/sv = 3.14 \times 10^6\text{ m/s} (33 significant figures). The integer 22 is an exact formula coefficient; the precision is limited by the least precise measured value, EkE_k (33 sig figs): 2(4.50×10−18)/(9.109×10−31)≈3.1433×106 m/s\sqrt{2(4.50 \times 10^{-18}) / (9.109 \times 10^{-31})} \approx 3.1433 \times 10^6\text{ m/s}.

Loading workspace…