Resources

A chemical reaction progress diagram profiles the single-step conversion of reactant A\text{A} to product B\text{B}. On the vertical potential energy axis, the baseline potential energy of reactant A\text{A} is 45.0 kJ/mol45.0\text{ kJ/mol}, the energy of the activated complex at the peak is 112.5 kJ/mol112.5\text{ kJ/mol}, and the potential energy of product B\text{B} is 18.0 kJ/mol18.0\text{ kJ/mol}. (a) Determine the activation energy for the forward reaction, Ea, forwardE_{\text{a, forward}}. (b) Determine the enthalpy change for the overall reaction, ΔHrxn\Delta H_{\text{rxn}}, and state whether the reaction is endothermic or exothermic. (c) Determine the activation energy for the reverse reaction, Ea, reverseE_{\text{a, reverse}}.

Answer and steps

Final answer

(a) Ea, forward=67.5 kJ/molE_{\text{a, forward}} = 67.5\text{ kJ/mol}; (b) ΔHrxn=−27.0 kJ/mol\Delta H_{\text{rxn}} = -27.0\text{ kJ/mol}, exothermic; (c) Ea, reverse=94.5 kJ/molE_{\text{a, reverse}} = 94.5\text{ kJ/mol}.

Steps

Part (a): Forward Activation Energy (Ea, forwardE_{\text{a, forward}})

The activation energy of the forward reaction is the energy barrier that reactants must overcome to reach the transition state (activated complex). It equals the difference between the potential energy of the activated complex and the potential energy of the reactants:

Ea, forward=Eactivated complex−EreactantsE_{\text{a, forward}} = E_{\text{activated complex}} - E_{\text{reactants}}

Substitute the given values:

Ea, forward=112.5 kJ/mol−45.0 kJ/mol=67.5 kJ/molE_{\text{a, forward}} = 112.5\text{ kJ/mol} - 45.0\text{ kJ/mol} = 67.5\text{ kJ/mol}


Part (b): Enthalpy Change of the Reaction (ΔHrxn\Delta H_{\text{rxn}})

The overall change in enthalpy is the difference in potential energy between the products and the reactants:

ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}

Substitute the given values:

ΔHrxn=18.0 kJ/mol−45.0 kJ/mol=−27.0 kJ/mol\Delta H_{\text{rxn}} = 18.0\text{ kJ/mol} - 45.0\text{ kJ/mol} = -27.0\text{ kJ/mol}

  • Thermochemical Classification: Because the enthalpy change is negative (ΔHrxn<0\Delta H_{\text{rxn}} < 0), potential energy is released to the surroundings as heat, meaning the reaction is exothermic.

Common Pitfall: Ensure you subtract reactants from products (Final−Initial\text{Final} - \text{Initial}) when calculating ΔH\Delta H. Calculating Ereactants−EproductsE_{\text{reactants}} - E_{\text{products}} will yield the wrong sign.


Part (c): Reverse Activation Energy (Ea, reverseE_{\text{a, reverse}})

The activation energy for the reverse reaction is the energy needed for the product molecules to reach the same activated complex:

Ea, reverse=Eactivated complex−EproductsE_{\text{a, reverse}} = E_{\text{activated complex}} - E_{\text{products}}

Substitute the values:

Ea, reverse=112.5 kJ/mol−18.0 kJ/mol=94.5 kJ/molE_{\text{a, reverse}} = 112.5\text{ kJ/mol} - 18.0\text{ kJ/mol} = 94.5\text{ kJ/mol}

(Check using the relationship Ea, reverse=Ea, forward−ΔHrxnE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H_{\text{rxn}}: 67.5 kJ/mol−(−27.0 kJ/mol)=94.5 kJ/mol67.5\text{ kJ/mol} - (-27.0\text{ kJ/mol}) = 94.5\text{ kJ/mol}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates enthalpy change as reactants minus products instead of products minus reactants, incorrectly obtaining a positive ΔH of +27.0 kJ/mol and classifying the reaction as endothermic.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ea, forward=112.5 kJ/mol−45.0 kJ/mol  ⟹  Ea, forward=67.5 kJ/molE_{\text{a, forward}} = 112.5\text{ kJ/mol} - 45.0\text{ kJ/mol} \implies E_{\text{a, forward}} = 67.5\text{ kJ/mol}

  2. Step 2

    ΔH=45.0 kJ/mol−18.0 kJ/mol=+27.0 kJ/mol  ⟹  ΔH>0, so the reaction is endothermic\Delta H = 45.0\text{ kJ/mol} - 18.0\text{ kJ/mol} = +27.0\text{ kJ/mol} \implies \Delta H > 0\text{, so the reaction is endothermic}

    Correct

    ΔHrxn=18.0 kJ/mol−45.0 kJ/mol=−27.0 kJ/mol  ⟹  exothermic\Delta H_{\text{rxn}} = 18.0\text{ kJ/mol} - 45.0\text{ kJ/mol} = -27.0\text{ kJ/mol} \implies \text{exothermic}

    You calculated ΔH\Delta H as Ereactants−EproductsE_{\text{reactants}} - E_{\text{products}} instead of Eproducts−EreactantsE_{\text{products}} - E_{\text{reactants}}. Because enthalpy change is always final state minus initial state, ΔH\Delta H is negative (−27.0 kJ/mol-27.0\text{ kJ/mol}), which means the reaction is exothermic.

  3. Step 3

    Ea, reverse=112.5 kJ/mol−18.0 kJ/mol  ⟹  Ea, reverse=94.5 kJ/molE_{\text{a, reverse}} = 112.5\text{ kJ/mol} - 18.0\text{ kJ/mol} \implies E_{\text{a, reverse}} = 94.5\text{ kJ/mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that activation energy is measured from the ground state to the transition state peak for both the forward and reverse directions.

You performed all arithmetic operations accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign inversion in thermodynamic state change

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You subtracted the final state (products) from the initial state (reactants) when computing ΔH\Delta H, rather than following the fundamental thermodynamic convention of Δ=final−initial\Delta = \text{final} - \text{initial}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convention for Change (Delta)
  • Any change denoted by Δ\Delta is always defined as Final−Initial\text{Final} - \text{Initial}, giving ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}.

  • Always write the products term first and check whether the products sit lower (exothermic, ΔH<0\Delta H < 0) or higher (endothermic, ΔH>0\Delta H > 0) than the reactants on the energy axis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the thermodynamic definition ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}.

  2. Substitute the given values: ΔHrxn=18.0 kJ/mol−45.0 kJ/mol=−27.0 kJ/mol\Delta H_{\text{rxn}} = 18.0\text{ kJ/mol} - 45.0\text{ kJ/mol} = -27.0\text{ kJ/mol}.

  3. Classify the thermochemical sign: since ΔHrxn<0\Delta H_{\text{rxn}} < 0, energy is released and the reaction is exothermic.

Final answer

(a) Ea, forward=67.5 kJ/molE_{\text{a, forward}} = 67.5\text{ kJ/mol}; (b) ΔHrxn=−27.0 kJ/mol\Delta H_{\text{rxn}} = -27.0\text{ kJ/mol}, exothermic; (c) Ea, reverse=94.5 kJ/molE_{\text{a, reverse}} = 94.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before calculating, inspect the diagram visually: if the product plateau is lower than the reactant plateau, immediately write down that ΔH\Delta H must be negative and exothermic.

  • Use the consistency check Ea, reverse−Ea, forward=−ΔHrxnE_{\text{a, reverse}} - E_{\text{a, forward}} = -\Delta H_{\text{rxn}} to verify both activation barriers and enthalpy change together.

OverviewACEpath Teacher's Diagnosis

02 The student confuses activation energy with the absolute energy of the transition state and reports the peak value of 112.5 kJ/mol rather than the difference between the transition state and the initial state.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ea, forward=E(peak)=112.5 kJ/molE_{\text{a, forward}} = E(\text{peak}) = 112.5\text{ kJ/mol}

    Correct

    Ea, forward=Epeak−Ereactants=112.5 kJ/mol−45.0 kJ/mol=67.5 kJ/molE_{\text{a, forward}} = E_{\text{peak}} - E_{\text{reactants}} = 112.5\text{ kJ/mol} - 45.0\text{ kJ/mol} = 67.5\text{ kJ/mol}

    Activation energy represents an energy barrier (a difference), not an absolute energy level. To find Ea, forwardE_{\text{a, forward}}, you must subtract the baseline reactant energy from the transition-state peak energy.

  2. Step 2

    ΔH=18.0 kJ/mol−45.0 kJ/mol=−27.0 kJ/mol  ⟹  The reaction is exothermic\Delta H = 18.0\text{ kJ/mol} - 45.0\text{ kJ/mol} = -27.0\text{ kJ/mol} \implies \text{The reaction is exothermic}

  3. Step 3

    Ea, reverse=112.5 kJ/mol−18.0 kJ/mol=94.5 kJ/molE_{\text{a, reverse}} = 112.5\text{ kJ/mol} - 18.0\text{ kJ/mol} = 94.5\text{ kJ/mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated ΔHrxn\Delta H_{\text{rxn}} using products minus reactants and classified the reaction as exothermic.

You correctly recognized that reverse activation energy requires subtracting the product energy from the peak energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Peak energy vs activation barrier confusion

You equated the forward activation energy directly to the peak energy value of 112.5 kJ/mol112.5\text{ kJ/mol} instead of calculating the height of the barrier above the reactants.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated activation energy as an absolute position on the energy axis rather than a relative height difference (ΔE\Delta E) from the starting state to the transition state.

REASONING PATH
Your ACEpath teacher’s suggested approach
Activation Energy Is a Difference
  • Ea=Etransition state−Einitial stateE_{\text{a}} = E_{\text{transition state}} - E_{\text{initial state}}

  • Always find the height difference from your starting level to the peak; never take the peak value alone unless reactants start at exactly 0 kJ/mol0\text{ kJ/mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the initial baseline energy of reactant A\text{A}: Ereactants=45.0 kJ/molE_{\text{reactants}} = 45.0\text{ kJ/mol}.

  2. Identify the transition state energy at the peak: Epeak=112.5 kJ/molE_{\text{peak}} = 112.5\text{ kJ/mol}.

  3. Calculate the difference: Ea, forward=112.5 kJ/mol−45.0 kJ/mol=67.5 kJ/molE_{\text{a, forward}} = 112.5\text{ kJ/mol} - 45.0\text{ kJ/mol} = 67.5\text{ kJ/mol}.

Final answer

Ea, forward=67.5 kJ/molE_{\text{a, forward}} = 67.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the graphical definition of activation energy as the vertical arrow pointing from the reactant plateau to the summit.

  • Check that both forward and reverse activation energies are calculated as differences from their respective starting plateaus.

OverviewACEpath Teacher's Diagnosis

03 The student calculates reverse activation energy from the reactant energy level rather than the product energy level, resulting in 67.5 kJ/mol instead of 94.5 kJ/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ea, forward=112.5 kJ/mol−45.0 kJ/mol=67.5 kJ/molE_{\text{a, forward}} = 112.5\text{ kJ/mol} - 45.0\text{ kJ/mol} = 67.5\text{ kJ/mol}

  2. Step 2

    ΔH=18.0 kJ/mol−45.0 kJ/mol=−27.0 kJ/mol  ⟹  The reaction is exothermic\Delta H = 18.0\text{ kJ/mol} - 45.0\text{ kJ/mol} = -27.0\text{ kJ/mol} \implies \text{The reaction is exothermic}

  3. Step 3

    Ea, reverse=112.5 kJ/mol−45.0 kJ/mol  ⟹  Ea, reverse=67.5 kJ/molE_{\text{a, reverse}} = 112.5\text{ kJ/mol} - 45.0\text{ kJ/mol} \implies E_{\text{a, reverse}} = 67.5\text{ kJ/mol}

    Correct

    Ea, reverse=Eactivated complex−Eproducts=112.5 kJ/mol−18.0 kJ/mol=94.5 kJ/molE_{\text{a, reverse}} = E_{\text{activated complex}} - E_{\text{products}} = 112.5\text{ kJ/mol} - 18.0\text{ kJ/mol} = 94.5\text{ kJ/mol}

    You subtracted the reactant energy (45.0 kJ/mol45.0\text{ kJ/mol}) rather than the product energy (18.0 kJ/mol18.0\text{ kJ/mol}). For the reverse reaction, the products act as the starting point to reach the transition-state barrier.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the forward activation energy as the barrier from reactants to the activated complex.

You correctly found the enthalpy change ΔH\Delta H using Final−Initial\text{Final} - \text{Initial} and properly deduced that the process is exothermic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Baseline Reference Error in Reverse Activation Energy

You reused the reactant potential energy (45.0 kJ/mol45.0\text{ kJ/mol}) instead of using the product potential energy (18.0 kJ/mol18.0\text{ kJ/mol}) when calculating the reverse energy barrier.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the baseline starting state of the forward reaction with that of the reverse reaction. In a reverse reaction, the products (extB ext{B}) serve as the starting state, so the reverse barrier is measured from the product plateau up to the transition-state peak: Ea, reverse=Epeak−EproductsE_{\text{a, reverse}} = E_{\text{peak}} - E_{\text{products}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Starting State for Reverse Direction
  • Ea, reverse=Eactivated complex−EproductsE_{\text{a, reverse}} = E_{\text{activated complex}} - E_{\text{products}}

  • Always measure reverse activation energy from the energy plateau of the products to the peak.

Consistency Check via Enthalpy
  • Ea, reverse=Ea, forward−ΔHrxnE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H_{\text{rxn}}

  • Verify your calculation: 67.5 kJ/mol−(−27.0 kJ/mol)=94.5 kJ/mol67.5\text{ kJ/mol} - (-27.0\text{ kJ/mol}) = 94.5\text{ kJ/mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the energy of the activated complex: Epeak=112.5 kJ/molE_{\text{peak}} = 112.5\text{ kJ/mol}.

  2. Identify the starting baseline for the reverse reaction (the products): Eproducts=18.0 kJ/molE_{\text{products}} = 18.0\text{ kJ/mol}.

  3. Compute the barrier difference: Ea, reverse=112.5 kJ/mol−18.0 kJ/mol=94.5 kJ/molE_{\text{a, reverse}} = 112.5\text{ kJ/mol} - 18.0\text{ kJ/mol} = 94.5\text{ kJ/mol}.

Final answer

(a) Ea, forward=67.5 kJ/molE_{\text{a, forward}} = 67.5\text{ kJ/mol}; (b) ΔHrxn=−27.0 kJ/mol\Delta H_{\text{rxn}} = -27.0\text{ kJ/mol}, exothermic; (c) Ea, reverse=94.5 kJ/molE_{\text{a, reverse}} = 94.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating reverse activation energy, highlight the product plateau on the energy diagram to visually anchor the starting energy.

  • Use the formula Ea, reverse=Ea, forward−ΔHE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H as an automatic double-check for every reaction energy diagram problem.

Lock it in

Similar question

01

A single-step reaction has reactants at 30.0 kJ/mol30.0\text{ kJ/mol}, a transition state peak at 95.0 kJ/mol95.0\text{ kJ/mol}, and products at 72.0 kJ/mol72.0\text{ kJ/mol}. Calculate ΔHrxn\Delta H_{\text{rxn}} and state whether the reaction is endothermic or exothermic.

Answer

ΔHrxn=Eproducts−Ereactants=72.0 kJ/mol−30.0 kJ/mol=+42.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}} = 72.0\text{ kJ/mol} - 30.0\text{ kJ/mol} = +42.0\text{ kJ/mol}. Because ΔH>0\Delta H > 0, the reaction is endothermic.

02

For the reaction X→Y\text{X} \rightarrow \text{Y}, the forward activation energy is Ea, forward=55.0 kJ/molE_{\text{a, forward}} = 55.0\text{ kJ/mol} and the enthalpy change is ΔHrxn=−35.0 kJ/mol\Delta H_{\text{rxn}} = -35.0\text{ kJ/mol}. Find the activation energy for the reverse reaction, Ea, reverseE_{\text{a, reverse}}.

Answer

Using Ea, reverse=Ea, forward−ΔHrxnE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H_{\text{rxn}}, we have Ea, reverse=55.0 kJ/mol−(−35.0 kJ/mol)=90.0 kJ/molE_{\text{a, reverse}} = 55.0\text{ kJ/mol} - (-35.0\text{ kJ/mol}) = 90.0\text{ kJ/mol}.

03

In a catalyzed reaction, reactants lie at 80 kJ/mol80\text{ kJ/mol}, products lie at 25 kJ/mol25\text{ kJ/mol}, and the uncatalyzed peak is at 150 kJ/mol150\text{ kJ/mol}. A catalyst lowers the activation energy by 20 kJ/mol20\text{ kJ/mol}. Determine ΔHrxn\Delta H_{\text{rxn}} and the catalyzed reverse activation energy Ea, reverse, catE_{\text{a, reverse, cat}}.

Answer

ΔHrxn=25−80=−55 kJ/mol\Delta H_{\text{rxn}} = 25 - 80 = -55\text{ kJ/mol} (unaffected by catalyst). The catalyzed peak is 150−20=130 kJ/mol150 - 20 = 130\text{ kJ/mol}. Therefore, Ea, reverse, cat=130−25=105 kJ/molE_{\text{a, reverse, cat}} = 130 - 25 = 105\text{ kJ/mol}.

Loading workspace…