Resources

An aqueous deicing mixture containing magnesium chloride (MgCl2\text{MgCl}_2) is cooled toward freezing. Because real ionic solutions deviate from ideal behavior at higher concentrations, a 0.250 m0.250\text{ m} MgCl2\text{MgCl}_2 solution produces an experimentally observed freezing point depression of ΔTf=1.25∘C\Delta T_f = 1.25^\circ\text{C} in water (Kf=1.86∘C⋅kg/molK_f = 1.86^\circ\text{C}\cdot\text{kg/mol}). Calculate the apparent van 't Hoff factor (ii) under these threshold concentration conditions, and determine the percent deviation of this empirical ii from the ideal limiting factor predicted by complete dissociation.

Answer and steps

Final answer

i=2.69i = 2.69; percent deviation is 10.3%10.3\%

Steps

01

Identify the ideal van 't Hoff factor (iideali_{\text{ideal}})

When soluble ionic compounds dissolve in water, they dissociate into ions. For magnesium chloride (MgClX2\ce{MgCl2}):

MgClX2(s)→MgX2+(aq)+2 ClX−(aq)\ce{MgCl2 (s) -> Mg^2+ (aq) + 2 Cl^- (aq)}

Complete dissociation produces 11 mole of MgX2+\ce{Mg^2+} ions and 22 moles of ClX−\ce{Cl^-} ions for every 11 mole of MgClX2\ce{MgCl2} formula units dissolved. Therefore, the ideal theoretical van 't Hoff factor is:

iideal=1+2=3i_{\text{ideal}} = 1 + 2 = 3


02

Calculate the apparent experimental van 't Hoff factor (iempiricali_{\text{empirical}})

The colligative property formula relating freezing point depression (ΔTf\Delta T_f), molality (mm), the cryoscopic constant (KfK_f), and the van 't Hoff factor (ii) is:

ΔTf=i⋅Kf⋅m\Delta T_f = i \cdot K_f \cdot m

Rearranging to solve for ii:

i=ΔTfKf⋅mi = \frac{\Delta T_f}{K_f \cdot m}

Substitute the given experimental values into the equation:

i=1.25∘C1.86∘C⋅kg/mol⋅0.250 mol/kgi = \frac{1.25^\circ\text{C}}{1.86^\circ\text{C}\cdot\text{kg/mol} \cdot 0.250\text{ mol/kg}}

i=1.250.465≈2.6882≈2.69i = \frac{1.25}{0.465} \approx 2.6882 \approx 2.69

(Note: In real concentrated solutions, interionic attractions and transient ion pairing prevent ions from acting completely independently, causing iempiricali_{\text{empirical}} to be less than iideali_{\text{ideal}}.)


03

Determine the percent deviation

The percent deviation compares the difference between the ideal theoretical value and the empirical value relative to the ideal value:

Percent Deviation=∣iideal−iempirical∣iideal×100%\text{Percent Deviation} = \frac{|i_{\text{ideal}} - i_{\text{empirical}}|}{i_{\text{ideal}}} \times 100\%

Using iideal=3i_{\text{ideal}} = 3 and iempirical=2.69i_{\text{empirical}} = 2.69:

Percent Deviation=3−2.693×100%=0.313×100%≈10.3%\text{Percent Deviation} = \frac{3 - 2.69}{3} \times 100\% = \frac{0.31}{3} \times 100\% \approx 10.3\%

(Calculating directly with the unrounded value 3−2.68823×100%=0.31183×100%=10.39%\frac{3 - 2.6882}{3} \times 100\% = \frac{0.3118}{3} \times 100\% = 10.39\% rounds similarly to 10.3%10.3\% when using the three-digit rounded ii.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student identifies the ideal limiting van 't Hoff factor as 2 by counting only two distinct elements or neglecting the subscript on chlorine, resulting in an incorrect percent deviation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔTf=i⋅Kf⋅m  ⟹  i=1.251.86⋅0.250≈2.69\Delta T_f = i \cdot K_f \cdot m \implies i = \frac{1.25}{1.86 \cdot 0.250} \approx 2.69

  2. Step 2

    MgClX2→MgX2++ClX−\ce{MgCl2 -> Mg^2+ + Cl^-},\quad so \text{so } i_{ideal\text{ideal}} = 2_

    Correct

    MgClX2→MgX2++2 ClX−\ce{MgCl2 -> Mg^2+ + 2 Cl^-},\quad so \text{so } i_{ideal\text{ideal}} = 1 + 2 = 3_

    You omitted the stoichiometric subscript of 22 on chlorine when writing the dissociation reaction. One mole of MgClX2\ce{MgCl2} yields one mole of MgX2+\ce{Mg^2+} and two moles of ClX−\ce{Cl^-}, giving iideal=3i_{\text{ideal}} = 3.

  3. Step 3

    Percent deviation\text{Percent deviation} = (∣2.69−2∣2)\left(\frac{|2.69 - 2|}{2}\right) ⋅\cdot 100% = (0.692)\left(\frac{0.69}{2}\right) ⋅\cdot 100% = 34.5%

    Correct

    Percent deviation\text{Percent deviation} = ∣3−2.69∣3\frac{|3 - 2.69|}{3} ×\times 100% ≈\approx 10.3%

    You correctly applied the percent deviation formula, but your result was affected by the incorrect value of iideal=2i_{\text{ideal}} = 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and rearranged the freezing point depression formula ΔTf=i⋅Kf⋅m\Delta T_f = i \cdot K_f \cdot m.

You accurately computed the experimental van 't Hoff factor as 2.692.69.

You correctly set up the formula for percent deviation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dissociation stoichiometry error

No, this is a conceptual misunderstanding of balancing ionic dissociation equations from chemical formulas.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not account for the subscript in the chemical formula MgClX2\ce{MgCl2}, assuming dissociation produces only one chloride ion instead of two, resulting in iideal=2i_{\text{ideal}} = 2 instead of 33.

REASONING PATH
Your ACEpath teacher’s suggested approach
Count all ions from chemical subscripts
  • When a strong electrolyte dissociates completely, iideali_{\text{ideal}} equals the total sum of cations and anions produced per formula unit: AXx BXy→x AXy++y BXx−\ce{A_x B_y -> x A^{y+} + y B^{x-}}, so iideal=x+yi_{\text{ideal}} = x + y.

  • Always balance the dissociation equation and verify that both mass and charge are conserved before summing the ions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the balanced dissociation reaction for magnesium chloride: MgClX2(s)→MgX2+(aq)+2 ClX−(aq)\ce{MgCl2 (s) -> Mg^2+ (aq) + 2 Cl^- (aq)}.

  2. Sum the moles of ions formed per formula unit: iideal=1+2=3i_{\text{ideal}} = 1 + 2 = 3.

  3. Substitute iideal=3i_{\text{ideal}} = 3 and iempirical=2.69i_{\text{empirical}} = 2.69 into the percent deviation equation: Percent deviation=∣3−2.69∣3×100%=0.313×100%≈10.3%\text{Percent deviation} = \frac{|3 - 2.69|}{3} \times 100\% = \frac{0.31}{3} \times 100\% \approx 10.3\%.

Final answer

i=2.69i = 2.69; percent deviation is 10.3%10.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing dissociation equations for ionic compounds with subscripts greater than 1 (such as CaClX2\ce{CaCl2}, Al(NOX3)X3\ce{Al(NO3)3}, and NaX2SOX4\ce{Na2SO4}) to determine ideal van 't Hoff factors reliably.

  • Before calculating deviation, double-check whether the empirical ii is physically plausible (for MgClX2\ce{MgCl2}, iempiricali_{\text{empirical}} must fall between 11 and the theoretical maximum 33).

OverviewACEpath Teacher's Diagnosis

02 The student uses the empirical value rather than the theoretical ideal reference value in the denominator when calculating percent deviation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔTf=i⋅Kf⋅m  ⟹  i=1.251.86⋅0.250  ⟹  i=2.69\Delta T_f = i \cdot K_f \cdot m \implies i = \frac{1.25}{1.86 \cdot 0.250} \implies i = 2.69

  2. Step 2

    MgCl2→Mg2++2Cl−, so iideal=3\text{MgCl}_2 \to \text{Mg}^{2+} + 2\text{Cl}^-, \text{ so } i_{\text{ideal}} = 3

  3. Step 3

    Percent deviation=(∣2.69−3∣2.69)⋅100%  ⟹  Percent deviation=(0.312.69)⋅100%=11.5%\text{Percent deviation} = \left(\frac{|2.69 - 3|}{2.69}\right) \cdot 100\% \implies \text{Percent deviation} = \left(\frac{0.31}{2.69}\right) \cdot 100\% = 11.5\%

    Correct

    Percent deviation=∣iideal−iempirical∣iideal×100%=∣3−2.69∣3×100%=10.3%\text{Percent deviation} = \frac{|i_{\text{ideal}} - i_{\text{empirical}}|}{i_{\text{ideal}}} \times 100\% = \frac{|3 - 2.69|}{3} \times 100\% = 10.3\%

    You placed the empirical value (2.692.69) in the denominator instead of the theoretical reference value (iideal=3i_{\text{ideal}} = 3). Percent deviation is measured relative to the expected theoretical standard.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly rearranged the freezing point depression formula to find the apparent van 't Hoff factor.

You accurately determined the ideal van 't Hoff factor from the dissociation stoichiometry of magnesium chloride.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong denominator in percent deviation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the experimental result as the baseline in the denominator rather than the theoretical/ideal value that serves as the true standard of comparison.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Base in Percent Error / Deviation
  • Percent Error / Deviation=∣Theoretical−Experimental∣Theoretical×100%\text{Percent Error / Deviation} = \frac{|\text{Theoretical} - \text{Experimental}|}{\text{Theoretical}} \times 100\%

  • Always place the theoretical, accepted, or ideal reference value in the denominator when calculating deviation from an ideal model.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the ideal value iideal=3i_{\text{ideal}} = 3 into the denominator: Percent deviation=∣3−2.69∣3×100%\text{Percent deviation} = \frac{|3 - 2.69|}{3} \times 100\%

  2. Simplify the fraction: 0.313×100%≈10.33%\frac{0.31}{3} \times 100\% \approx 10.33\%

  3. Round to three significant figures to match the measured inputs: 10.3%10.3\%

Final answer

i=2.69i = 2.69; percent deviation is 10.3%10.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the denominator of your percent error or percent deviation expression always represents the accepted, ideal, or theoretical baseline value.

  • Practice distinguishing between percent difference (comparing two experimental measurements) and percent deviation (comparing an experimental measurement to an established theoretical standard).

OverviewACEpath Teacher's Diagnosis

03 The student calculates the denominator product as Kf / m instead of Kf · m when rearranging the freezing point depression formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    i=ΔTfKf/m  ⟹  i=1.251.86/0.250  ⟹  i=1.257.44≈0.168i = \frac{\Delta T_f}{K_f / m} \implies i = \frac{1.25}{1.86 / 0.250} \implies i = \frac{1.25}{7.44} \approx 0.168

    Correct

    i=ΔTfKf⋅m=1.25∘C1.86∘C⋅kg/mol⋅0.250 mol/kg=1.250.465≈2.69i = \frac{\Delta T_f}{K_f \cdot m} = \frac{1.25^\circ\text{C}}{1.86^\circ\text{C}\cdot\text{kg/mol} \cdot 0.250\text{ mol/kg}} = \frac{1.25}{0.465} \approx 2.69

    Starting from ΔTf=i⋅Kf⋅m\Delta T_f = i \cdot K_f \cdot m, dividing both sides by the product (Kf⋅m)(K_f \cdot m) gives i=ΔTfKf⋅mi = \frac{\Delta T_f}{K_f \cdot m}, not ΔTfKf/m\frac{\Delta T_f}{K_f / m}.

  2. Step 2

    MgClX2→MgX2++2 ClX−\ce{MgCl2 -> Mg^2+ + 2Cl^-}, so iideal=3i_{\text{ideal}} = 3

  3. Step 3

    Percent deviation=(∣0.168−3∣3)⋅100%  ⟹  Percent deviation=(2.8323)⋅100%=94.4%\text{Percent deviation} = \left(\frac{|0.168 - 3|}{3}\right) \cdot 100\% \implies \text{Percent deviation} = \left(\frac{2.832}{3}\right) \cdot 100\% = 94.4\%

    Correct

    Percent deviation=∣3−2.69∣3×100%=0.313×100%≈10.3%\text{Percent deviation} = \frac{|3 - 2.69|}{3} \times 100\% = \frac{0.31}{3} \times 100\% \approx 10.3\%

    Your formula and substitution method were correct, but the calculated deviation was affected by the erroneous value of i=0.168i = 0.168 from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the ionic dissociation equation for MgClX2\ce{MgCl2} to find iideal=3i_{\text{ideal}} = 3.

You correctly applied the percent deviation formula using your calculated values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error in colligative property formula

No; this was an algebraic misconception when dividing out multiple factors from a product.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When isolating a factor from a multi-variable product equation (y=a⋅b⋅cy = a \cdot b \cdot c), all accompanying factors must enter the denominator as a product (a=yb⋅ca = \frac{y}{b \cdot c}). Dividing one factor by another in the denominator instead inverted the relationship with molality.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Variables in Product Equations
  • If A=B⋅C⋅DA = B \cdot C \cdot D, then B=AC⋅DB = \frac{A}{C \cdot D}

  • Always place all factors being moved from the numerator into the denominator multiplied together.

Physical Sanity Check for $i$
  • For a salt that dissociates into nn ions, 1<iempirical≤n1 < i_{\text{empirical}} \le n in aqueous solution.

  • Check whether your calculated ii is between 11 and the theoretical maximum; a value less than 11 signals an inversion error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange the freezing point depression formula correctly: i=ΔTfKf⋅mi = \frac{\Delta T_f}{K_f \cdot m}

  2. Substitute the given values: i=1.251.86⋅0.250=1.250.465≈2.69i = \frac{1.25}{1.86 \cdot 0.250} = \frac{1.25}{0.465} \approx 2.69

  3. Calculate the percent deviation using iideal=3i_{\text{ideal}} = 3: Percent deviation=∣3−2.69∣3×100%=0.313×100%≈10.3%\text{Percent deviation} = \frac{|3 - 2.69|}{3} \times 100\% = \frac{0.31}{3} \times 100\% \approx 10.3\%

Final answer

i=2.69i = 2.69; percent deviation is 10.3%10.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating single variables from three-term products such as ΔTb=iKbm\Delta T_b = i K_b m and Π=iMRT\Pi = i M R T.

  • Perform a physical boundary check on colligative calculations: verify that i≥1i \ge 1 for non-associating solutes.

Lock it in

Similar question

01

A 0.150 m0.150\text{ m} aqueous solution of calcium chloride (CaClX2\ce{CaCl2}) has a measured freezing point depression of ΔTf=0.750∘C\Delta T_f = 0.750^\circ\text{C} in water (Kf=1.86∘C⋅kg/molK_f = 1.86^\circ\text{C}\cdot\text{kg/mol}). Calculate the apparent van 't Hoff factor (ii) and the percent deviation from ideal behavior.

Answer

i=2.69i = 2.69; percent deviation is 10.3%10.3\%. Dissociation: CaClX2→CaX2++2 ClX−  ⟹  iideal=3\ce{CaCl2 -> Ca^2+ + 2 Cl^-} \implies i_{\text{ideal}} = 3. From colligative data, i=0.7501.86×0.150≈2.688≈2.69i = \frac{0.750}{1.86 \times 0.150} \approx 2.688 \approx 2.69. Percent deviation =∣3−2.688∣3×100%≈10.4%= \frac{|3 - 2.688|}{3} \times 100\% \approx 10.4\% (or 10.3%10.3\% using rounded 2.692.69).

02

An aqueous solution of aluminum sulfate, AlX2(SOX4)X3\ce{Al2(SO4)3}, has a concentration of 0.0500 m0.0500\text{ m} and an experimental freezing point depression of ΔTf=0.395∘C\Delta T_f = 0.395^\circ\text{C} (Kf=1.86∘C⋅kg/molK_f = 1.86^\circ\text{C}\cdot\text{kg/mol}). Find the apparent van 't Hoff factor and determine its percent deviation from complete dissociation.

Answer

i=4.25i = 4.25; percent deviation is 15.0%15.0\%. Dissociation: AlX2(SOX4)X3→2 AlX3++3 SOX4X2−  ⟹  iideal=2+3=5\ce{Al2(SO4)3 -> 2 Al^3+ + 3 SO4^2-} \implies i_{\text{ideal}} = 2 + 3 = 5. Experimental factor: i=0.3951.86×0.0500≈4.247≈4.25i = \frac{0.395}{1.86 \times 0.0500} \approx 4.247 \approx 4.25. Percent deviation =∣5−4.247∣5×100%≈15.1%= \frac{|5 - 4.247|}{5} \times 100\% \approx 15.1\% (or 15.0%15.0\% using 4.254.25).

03

A 0.200 m0.200\text{ m} solution of an unknown strong electrolyte salt MXx XXy\ce{M_x X_y} exhibits an apparent freezing point depression of ΔTf=1.02∘C\Delta T_f = 1.02^\circ\text{C} (Kf=1.86∘C⋅kg/molK_f = 1.86^\circ\text{C}\cdot\text{kg/mol}). If the empirical factor has an 8.6%8.6\% deviation below its integer ideal limiting value, identify the ideal van 't Hoff factor iideali_{\text{ideal}} and suggest a matching stoichiometry for the salt formula.

Answer

iideal=3i_{\text{ideal}} = 3; stoichiometric formula type MXX2\ce{MX2} or MX2X\ce{M2X}. Step 1: Calculate iempirical=1.021.86×0.200≈2.742i_{\text{empirical}} = \frac{1.02}{1.86 \times 0.200} \approx 2.742. Step 2: Since iempirical=iideal×(1−0.086)=0.914⋅iideali_{\text{empirical}} = i_{\text{ideal}} \times (1 - 0.086) = 0.914 \cdot i_{\text{ideal}}, solve for iideal=2.7420.914≈3.00i_{\text{ideal}} = \frac{2.742}{0.914} \approx 3.00. A salt with iideal=3i_{\text{ideal}} = 3 forms three ions upon dissociation, matching formulas such as MgClX2\ce{MgCl2} or KX2SOX4\ce{K2SO4}.

Loading workspace…