Resources

An unknown polyatomic oxoacid containing chlorine has a molar mass of approximately 100.46 g/mol100.46\text{ g/mol} and ionizes in water to release hydrogen ions and an oxoanion with a −1-1 charge. (a) Deduce the chemical formula of the acid. (b) State the systematic name of the acid in aqueous solution and the corresponding name of its conjugate base anion.

Answer and steps

Final answer

(a) HClO3\text{HClO}_3; (b) Chloric acid; conjugate base: chlorate ion (ClO3−\text{ClO}_3^-)

Steps

01

Establish the General Formula of the Oxoacid

An oxoacid of chlorine consists of hydrogen, chlorine, and oxygen. Because it ionizes in water to release a hydrogen ion (HX+\ce{H+}) and an oxoanion with a −1-1 charge, the acid is monoprotic (contains one acidic hydrogen per formula unit):

HClOXn(aq)→HX+(aq)+ClOXnX−(aq)\ce{HClO_n(aq) -> H+(aq) + ClO_n^-(aq)}

where nn is an integer representing the number of oxygen atoms in the polyatomic structure.


02

Relate Molar Mass and Formula

Using standard atomic weights:

  • Hydrogen (H\ce{H}): 1.01 g/mol1.01\text{ g/mol}
  • Chlorine (Cl\ce{Cl}): 35.45 g/mol35.45\text{ g/mol}
  • Oxygen (O\ce{O}): 16.00 g/mol16.00\text{ g/mol}

The molar mass of HClOXn\ce{HClO_n} is calculated as:

M(HClOXn)=M(H)+M(Cl)+n⋅M(O)=1.01+35.45+16.00n=36.46+16.00n g/molM(\ce{HClO_n}) = M(\ce{H}) + M(\ce{Cl}) + n \cdot M(\ce{O}) = 1.01 + 35.45 + 16.00n = 36.46 + 16.00n\text{ g/mol}

In the series of chlorine oxoacids:

  • Hypochlorous acid (HClO\ce{HClO}, n=1n=1): M≈52.46 g/molM \approx 52.46\text{ g/mol}
  • Chlorous acid (HClOX2\ce{HClO2}, n=2n=2): M≈68.46 g/molM \approx 68.46\text{ g/mol}
  • Chloric acid (HClOX3\ce{HClO3}, n=3n=3): M≈84.46 g/molM \approx 84.46\text{ g/mol}
  • Perchloric acid (HClOX4\ce{HClO4}, n=4n=4): M≈100.46 g/molM \approx 100.46\text{ g/mol}

The identified chlorine oxoacid is HClOX3\ce{HClO3}.

Pitfall Alert: Be careful not to confuse chloric acid (HClOX3\ce{HClO3}) with perchloric acid (HClOX4\ce{HClO4}). The prefix per- signifies the maximum oxidation state with one additional oxygen atom relative to the reference -ic acid.


03

Determine the Names of the Acid and Conjugate Base

Standard inorganic nomenclature for oxoacids and their corresponding oxoanions follows specific suffix rules:

  1. Name of the acid: The reference oxidation state for the halogen oxoacid family uses the suffix -ic acid. Therefore, aqueous HClOX3\ce{HClO3} is systematically named chloric acid.
  2. Name of the conjugate base anion: Removing HX+\ce{H+} from HClOX3\ce{HClO3} yields the anion ClOX3X−\ce{ClO3-}. An acid ending in -ic acid yields an anion ending in -ate ion: chloric acid⟶chlorate ion\text{chloric acid} \longrightarrow \text{chlorate ion}

Thus, the conjugate base anion ClOX3X−\ce{ClO3-} is named the chlorate ion.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts molar masses incorrectly or confuses chloric acid with perchloric acid, deducing n = 3 and giving names corresponding to chloric acid/chlorate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    M(HClOn)=1.01+35.45+16.00n=100.46  ⟹  16.00n=48.00  ⟹  n=3M(\text{HClO}_n) = 1.01 + 35.45 + 16.00n = 100.46 \implies 16.00n = 48.00 \implies n = 3

    Correct

    1.01+35.45+16.00n=100.46  ⟹  16.00n=64.00  ⟹  n=41.01 + 35.45 + 16.00n = 100.46 \implies 16.00n = 64.00 \implies n = 4

    You correctly set up the molar mass equation, but made an arithmetic subtraction error: 100.46−36.46=64.00100.46 - 36.46 = 64.00, not 48.0048.00. Dividing 64.0064.00 by 16.0016.00 gives n=4n = 4.

  2. Step 2

    Formula: HClO3\text{Formula: } \text{HClO}_3

    Correct

    Formula: HClO4\text{Formula: } \text{HClO}_4

    Your formula followed directly from your calculated value of n=3n = 3, but because n=4n = 4, the correct formula is HClO4\text{HClO}_4.

  3. Step 3

    Acid name: chloric acid,Anion name: chlorate ion\text{Acid name: chloric acid}, \text{Anion name: chlorate ion}

    Correct

    Acid name: perchloric acid,Anion name: perchlorate ion\text{Acid name: perchloric acid}, \text{Anion name: perchlorate ion}

    You correctly applied the nomenclature rules to HClO3\text{HClO}_3, but because the acid is HClO4\text{HClO}_4, its systematic aqueous name is perchloric acid and its conjugate base (ClO4−\text{ClO}_4^-) is the perchlorate ion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the general formula HClOn\text{HClO}_n for a monoprotic chlorine oxoacid.

You used accurate standard atomic weights for hydrogen, chlorine, and oxygen in your setup.

You correctly applied oxoacid and oxoanion nomenclature rules to the formula you deduced.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic Subtraction Error

You subtracted 36.4636.46 from 100.46100.46 and obtained 48.0048.00 instead of 64.0064.00, which produced n=3n = 3 instead of n=4n = 4.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

An arithmetic error when isolating 16.00n16.00n (100.46−36.46100.46 - 36.46) resulted in an incorrect oxygen count of 33. This propagated into parts (a) and (b), leading to chloric acid instead of perchloric acid.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Oxygen Mass
  • For an oxoacid HaXbOn\text{H}_a\text{X}_b\text{O}_n, the mass contributed by oxygen is 16.00n=M(total)−[a⋅M(H)+b⋅M(X)]16.00n = M(\text{total}) - [a \cdot M(\text{H}) + b \cdot M(\text{X})].

  • Perform decimal subtraction carefully or verify by adding back: 36.46+64.00=100.46 g/mol36.46 + 64.00 = 100.46\text{ g/mol}.

Chlorine Oxoacid Series
  • The four chlorine oxoacids are hypochlorous (HClO\text{HClO}, +1+1), chlorous (HClO2\text{HClO}_2, +3+3), chloric (HClO3\text{HClO}_3, +5+5), and perchloric (HClO4\text{HClO}_4, +7+7).

  • Notice that each additional oxygen adds exactly 16.00 g/mol16.00\text{ g/mol}: 52.46→68.46→84.46→100.46 g/mol52.46 \to 68.46 \to 84.46 \to 100.46\text{ g/mol}. Since the molar mass is 100.46 g/mol100.46\text{ g/mol}, it corresponds to the four-oxygen member.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the combined mass of H\text{H} and Cl\text{Cl} from the total molar mass: 16.00n=100.46−(1.01+35.45)=100.46−36.46=64.0016.00n = 100.46 - (1.01 + 35.45) = 100.46 - 36.46 = 64.00.

  2. Divide by the molar mass of oxygen to determine nn: n=64.0016.00=4n = \frac{64.00}{16.00} = 4.

  3. Write the formula for the acid: HClO4\text{HClO}_4.

  4. Apply systematic nomenclature: HClO4\text{HClO}_4 is perchloric acid, and removing HX+\ce{H+} gives its conjugate base ClOX4X−\ce{ClO_4^-}, the perchlorate ion.

Final answer

(a) HClO4\text{HClO}_4; (b) Perchloric acid; conjugate base: perchlorate ion (ClO4−\text{ClO}_4^-)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice solving for unknown formula subscripts with multi-digit decimal subtraction.

  • Memorize the four-member halogen oxoacid naming pattern: hypo-...-ous, -ous, -ic, and per-...-ic.

OverviewACEpath Teacher's Diagnosis

02 The student deduces the correct formula HClO4 but omits the 'per-' prefix in the nomenclature of chlorine oxoacids with the highest oxidation state, naming them chloric acid and chlorate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    M(HClOXn)=1.01+35.45+16.00n=100.46  ⟹  36.46+16.00n=100.46  ⟹  16.00n=64.00  ⟹  n=4  ⟹  Formula: HClOX4M(\ce{HClO_n}) = 1.01 + 35.45 + 16.00n = 100.46 \implies 36.46 + 16.00n = 100.46 \implies 16.00n = 64.00 \implies n = 4 \implies \text{Formula: } \ce{HClO4}

  2. Step 2

    Acid name: chloric acid\text{Acid name: chloric acid}

    Correct

    perchloric acid\text{perchloric acid}

    Chloric acid corresponds to HClOX3\ce{HClO3} where chlorine has a +5+5 oxidation state. For HClOX4\ce{HClO4}, where chlorine is in its highest oxidation state of +7+7, the prefix per- must be added to give perchloric acid.

  3. Step 3

    Anion name: chlorate ion\text{Anion name: chlorate ion}

    Correct

    perchlorate ion\text{perchlorate ion}

    The conjugate base of HClOX4\ce{HClO4} is ClOX4X−\ce{ClO4-}. While an -ic acid forms an -ate anion, the per- prefix is retained, making it the perchlorate ion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the general formula of a monoprotic chlorine oxoacid as HClOXn\ce{HClO_n}.

You solved the linear equation for the number of oxygen atoms accurately to find n=4n = 4 and deduced HClOX4\ce{HClO4}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Nomenclature of halogen oxoacids and oxoanions

No, this is a conceptual naming convention error regarding the prefix used for the halogen oxoacid with the highest oxidation state.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated HClOX4\ce{HClO4} as the base -ic acid rather than recognizing that HClOX3\ce{HClO3} is chloric acid (oxidation state +5+5) and HClOX4\ce{HClO4} has one additional oxygen atom (oxidation state +7+7), which requires the per- prefix (perchloric acid / perchlorate ion).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Acid Identification
  • In halogen oxoacid nomenclature, the reference acid with suffix -ic has three oxygen atoms: HClOX3\ce{HClO3} is chloric acid.

  • Use chloric acid (HClOX3\ce{HClO3}) and chlorate (ClOX3X−\ce{ClO3-}) as the reference baseline.

Prefix for One More Oxygen
  • An oxoacid with one more oxygen atom than the -ic acid takes the prefix per- (per---ic acid), and its conjugate base takes per---ate.

  • Name HClOX4\ce{HClO4} perchloric acid and ClOX4X−\ce{ClO4-} perchlorate ion.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the chlorine oxoacid series: HClO\ce{HClO} (hypochlorous acid), HClOX2\ce{HClO2} (chlorous acid), HClOX3\ce{HClO3} (chloric acid), and HClOX4\ce{HClO4} (perchloric acid).

  2. Since the deduced formula contains 4 oxygen atoms (HClOX4\ce{HClO4}), apply the prefix per- to the base name: perchloric acid.

  3. Remove HX+\ce{H+} to obtain the conjugate base ClOX4X−\ce{ClO4-}, retaining the prefix per- with the suffix -ate: perchlorate ion.

Final answer

(a) HClOX4\ce{HClO4}; (b) Perchloric acid; conjugate base: perchlorate ion (ClOX4X−\ce{ClO4-})

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the four chlorine oxoacids in order of increasing oxygen atoms: hypo-...-ous (1O1\ce{O}), -ous (2O2\ce{O}), -ic (3O3\ce{O}), and per-...-ic (4O4\ce{O}).

  • Practice naming the corresponding conjugate base anions by switching -ic acid to -ate ion and -ous acid to -ite ion while keeping any hypo- or per- prefixes.

OverviewACEpath Teacher's Diagnosis

03 The student deduces the correct formula HClO4 and acid name perchloric acid, but confuses oxoanion nomenclature suffixes by using '-ite' instead of '-ate', naming the conjugate base perchlorite.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1.01+35.45+16.00n=100.46  ⟹  16.00n=64.00  ⟹  n=4  ⟹  Formula: HClOX41.01 + 35.45 + 16.00n = 100.46 \implies 16.00n = 64.00 \implies n = 4 \implies \text{Formula: } \ce{HClO4}

  2. Step 2

    Acid name: perchloric acid\text{Acid name: perchloric acid}

  3. Step 3

    Anion name: perchlorite ion\text{Anion name: perchlorite ion}

    Correct

    Perchlorate ion\text{Perchlorate ion}

    You paired the '-ic acid' form with the '-ite' suffix instead of '-ate'. An oxoacid ending in '-ic acid' yields an anion ending in '-ate'.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up and solved the molar mass equation to determine the number of oxygen atoms.

You accurately identified the acid formula as HClOX4\ce{HClO4}.

You correctly assigned the name perchloric acid to HClOX4\ce{HClO4}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Nomenclature Suffix Mismatch

You accidentally swapped the anion suffix rule, writing '-ite' rather than '-ate' for the conjugate base of an '-ic' acid.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusion regarding the systematic pairing between oxoacid and oxoanion suffixes: acids ending in '-ic acid' correspond to anions ending in '-ate', whereas acids ending in '-ous acid' correspond to anions ending in '-ite'.

REASONING PATH
Your ACEpath teacher’s suggested approach
Oxoacid to Oxoanion Suffix Pairing
  • An acid ending in '-ic acid' always forms an anion ending in '-ate' (maintaining any prefix such as 'per-'). An acid ending in '-ous acid' forms an anion ending in '-ite'.

  • Pair 'perchloric acid' with 'perchlorate ion' by converting '-ic' to '-ate'.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. The acid is perchloric acid (HClOX4\ce{HClO4}).

  2. Ionization removes a proton: HClOX4→HX++ClOX4X−\ce{HClO4 -> H+ + ClO4-}.

  3. Apply the suffix rule: an '-ic acid' forms an '-ate' anion, preserving the prefix 'per-'.

Final answer

(a) HClOX4\ce{HClO4}; (b) Perchloric acid; conjugate base: perchlorate ion (ClOX4X−\ce{ClO4-})

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic: 'I ate something icky; delicious bite of white' (-ate\text{-ate} ↔\leftrightarrow -ic\text{-ic}; -ite\text{-ite} ↔\leftrightarrow -ous\text{-ous}).

  • Review the complete chlorine oxoacid/oxoanion series from hypochlorite to perchlorate.

Lock it in

Similar question

01

An unknown oxoacid of bromine has the general formula HBrOn\text{HBrO}_n and a molar mass of approximately 112.91 g/mol112.91\text{ g/mol}. Using M(H)=1.01 g/molM(\text{H}) = 1.01\text{ g/mol}, M(Br)=79.90 g/molM(\text{Br}) = 79.90\text{ g/mol}, and M(O)=16.00 g/molM(\text{O}) = 16.00\text{ g/mol}, deduce (a) the chemical formula of the acid and (b) its systematic name and the name of its conjugate base anion.

Answer

(a) HBrO2\text{HBrO}_2; (b) Bromous acid; conjugate base: bromite ion (BrO2−\text{BrO}_2^-). Key steps: 16.00n=112.91−(1.01+79.90)=32.00  ⟹  n=216.00n = 112.91 - (1.01 + 79.90) = 32.00 \implies n = 2.

02

An unknown diprotic oxoacid of sulfur has the formula H2SOn\text{H}_2\text{SO}_n and a molar mass of approximately 98.08 g/mol98.08\text{ g/mol}. Given M(H)=1.01 g/molM(\text{H}) = 1.01\text{ g/mol}, M(S)=32.06 g/molM(\text{S}) = 32.06\text{ g/mol}, and M(O)=16.00 g/molM(\text{O}) = 16.00\text{ g/mol}, deduce its formula, systematic acid name, and the name and formula of its fully deprotonated conjugate base anion.

Answer

Formula: H2SO4\text{H}_2\text{SO}_4; Acid name: sulfuric acid; Anion: sulfate ion (SO42−\text{SO}_4^{2-}). Key steps: 2(1.01)+32.06+16.00n=98.08  ⟹  16.00n=64.00  ⟹  n=42(1.01) + 32.06 + 16.00n = 98.08 \implies 16.00n = 64.00 \implies n = 4.

03

An oxoacid of iodine has a molar mass of approximately 175.91 g/mol175.91\text{ g/mol}. Using M(H)=1.01 g/molM(\text{H}) = 1.01\text{ g/mol}, M(I)=126.90 g/molM(\text{I}) = 126.90\text{ g/mol}, and M(O)=16.00 g/molM(\text{O}) = 16.00\text{ g/mol}, deduce its chemical formula, state its systematic name, and state the formula and name of the acid formed if one additional oxygen atom is added.

Answer

Formula: HIO3\text{HIO}_3; Name: iodic acid (conjugate base: iodate ion). Key steps: 16.00n=175.91−(1.01+126.90)=48.00  ⟹  n=316.00n = 175.91 - (1.01 + 126.90) = 48.00 \implies n = 3. Adding one oxygen gives HIO4\text{HIO}_4, named periodic acid (conjugate base: periodate ion).

Loading workspace…