Resources

A specialized pharmaceutical microbalance has a minimum detection limit threshold of 1.50×10−6 g1.50 \times 10^{-6}\text{ g} (1.50  μg1.50\;\mu\text{g}). Determine the minimum number of formula units of anhydrous magnesium sulfate (MgSO4\text{MgSO}_4, molar mass =120.37 g/mol= 120.37\text{ g/mol}) required to trigger a measurable response on this microbalance.

Answer and steps

Final answer

Nmin=7.50×1015 formula unitsN_{\text{min}} = 7.50 \times 10^{15}\text{ formula units}

Steps

01

Convert mass to moles

To find the minimum number of formula units required to register on the microbalance, we convert the mass of anhydrous magnesium sulfate (MgSOX4\ce{MgSO4}) into moles, and then convert moles into formula units using Avogadro's constant.

The relationship between mass (mm), molar mass (MM), and amount in moles (nn) is:

n=mMn = \frac{m}{M}

Given:

  • Minimum mass, m=1.50×10−6 gm = 1.50 \times 10^{-6}\text{ g}
  • Molar mass of MgSOX4\ce{MgSO4}, M=120.37 g/molM = 120.37\text{ g/mol}

Substitute the values:

n=1.50×10−6 g120.37 g/mol≈1.246×10−8 moln = \frac{1.50 \times 10^{-6}\text{ g}}{120.37\text{ g/mol}} \approx 1.246 \times 10^{-8}\text{ mol}

02

Convert moles to formula units

One mole of an ionic compound contains Avogadro's number of formula units (NA≈6.022×1023 formula units/molN_{\text{A}} \approx 6.022 \times 10^{23}\text{ formula units/mol}).

The total number of formula units (NminN_{\text{min}}) is:

Nmin=n⋅NAN_{\text{min}} = n \cdot N_{\text{A}}

Substitute the values:

Nmin=(1.246×10−8 mol)⋅(6.022×1023 formula units/mol)N_{\text{min}} = (1.246 \times 10^{-8}\text{ mol}) \cdot (6.022 \times 10^{23}\text{ formula units/mol})

Nmin≈7.504×1015 formula unitsN_{\text{min}} \approx 7.504 \times 10^{15}\text{ formula units}

Rounding to three significant figures to match the given mass (1.50×10−6 g1.50 \times 10^{-6}\text{ g}):

Nmin=7.50×1015 formula unitsN_{\text{min}} = 7.50 \times 10^{15}\text{ formula units}


Common Pitfall to Avoid: Ionic compounds such as MgSOX4\ce{MgSO4} do not exist as discrete molecules. Be careful not to refer to them as "molecules" or multiply by the number of constituent ions (MgX2+\ce{Mg^2+} and SOX4X2−\ce{SO4^2-}), because the question specifically asks for the number of formula units of MgSOX4\ce{MgSO4}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies the mass by the molar mass instead of dividing by it to find moles, resulting in an excessively large number of formula units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=m×M  ⟹  n=(1.50×10−6 g)×(120.37 g/mol)=1.806×10−4 moln = m \times M \implies n = (1.50 \times 10^{-6}\text{ g}) \times (120.37\text{ g/mol}) = 1.806 \times 10^{-4}\text{ mol}

    Correct

    n=mM=1.50×10−6 g120.37 g/mol≈1.246×10−8 moln = \frac{m}{M} = \frac{1.50 \times 10^{-6}\text{ g}}{120.37\text{ g/mol}} \approx 1.246 \times 10^{-8}\text{ mol}

    You multiplied mass by molar mass instead of dividing mass by molar mass. Checking the units shows that g×(g/mol)=g2/mol\text{g} \times (\text{g/mol}) = \text{g}^2/\text{mol}, whereas dividing yields gg/mol=mol\frac{\text{g}}{\text{g/mol}} = \text{mol}.

  2. Step 2

    N=n×NA=(1.806×10−4 mol)×(6.022×1023 mol−1)  ⟹  N=1.09×1020 formula unitsN = n \times N_{\text{A}} = (1.806 \times 10^{-4}\text{ mol}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) \implies N = 1.09 \times 10^{20}\text{ formula units}

    Correct

    N=n×NA=(1.246×10−8 mol)×(6.022×1023 mol−1)≈7.50×1015 formula unitsN = n \times N_{\text{A}} = (1.246 \times 10^{-8}\text{ mol}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) \approx 7.50 \times 10^{15}\text{ formula units}

    Your relationship for converting moles to formula units was completely correct, but your calculation used the incorrect mole value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Avogadro's constant to relate moles to total formula units.

You performed the arithmetic correctly based on the intermediate value you found.

You clearly tracked and labeled your physical quantities and units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion (multiplication instead of division)

You set n=m×Mn = m \times M instead of n=mMn = \frac{m}{M} when finding the amount in moles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the algebraic relationship between mass, molar mass, and moles, which can be avoided by verifying that the units cancel to yield moles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Cancellation Check
  • Molar mass has units of g/mol\text{g/mol}. To obtain mol\text{mol}, mass must be divided by molar mass: gg/mol=mol\frac{\text{g}}{\text{g/mol}} = \text{mol}.

  • Always write out unit fractions and cancel units before computing numeric values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the standard formula n=mMn = \frac{m}{M} to convert mass into moles.

  2. Substitute the given mass and molar mass: n=1.50×10−6 g120.37 g/mol=1.246×10−8 moln = \frac{1.50 \times 10^{-6}\text{ g}}{120.37\text{ g/mol}} = 1.246 \times 10^{-8}\text{ mol}.

  3. Multiply the correct mole quantity by Avogadro's number: N=(1.246×10−8 mol)×(6.022×1023 formula units/mol)=7.50×1015 formula unitsN = (1.246 \times 10^{-8}\text{ mol}) \times (6.022 \times 10^{23}\text{ formula units/mol}) = 7.50 \times 10^{15}\text{ formula units}.

Final answer

7.50×1015 formula units7.50 \times 10^{15}\text{ formula units}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mole conversion triangle or dimensional analysis roadmap (m→÷Mn→×NANm \xrightarrow{\div M} n \xrightarrow{\times N_{\text{A}}} N).

  • Practice tracking units explicitly through each step to catch inverted formulas immediately.

OverviewACEpath Teacher's Diagnosis

02 The student divides by Avogadro's number instead of multiplying by it when converting from moles to formula units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=mM=(1.50×10−6 g)120.37 g/mol=1.25×10−8 moln = \frac{m}{M} = \frac{(1.50 \times 10^{-6}\text{ g})}{120.37\text{ g/mol}} = 1.25 \times 10^{-8}\text{ mol}

  2. Step 2

    N=nNA=(1.25×10−8 mol)6.022×1023 mol−1N = \frac{n}{N_A} = \frac{(1.25 \times 10^{-8}\text{ mol})}{6.022 \times 10^{23}\text{ mol}^{-1}}

    Correct

    N=n⋅NA=(1.246×10−8 mol)(6.022×1023 formula units/mol)N = n \cdot N_A = (1.246 \times 10^{-8}\text{ mol})(6.022 \times 10^{23}\text{ formula units/mol})

    To convert from moles to individual formula units, you need to multiply by Avogadro's number (N=n⋅NAN = n \cdot N_A) because each mole contains 6.022×10236.022 \times 10^{23} particles. Dividing by NAN_A inverts the dimensional relationship.

  3. Step 3

    N=2.08×10−32 formula unitsN = 2.08 \times 10^{-32}\text{ formula units}

    Correct

    N=7.50×1015 formula unitsN = 7.50 \times 10^{15}\text{ formula units}

    This final result is incorrect due to the inverted formula in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the formula n=mMn = \frac{m}{M} to find moles from mass.

You accurately looked up and used Avogadro's constant with its standard numerical value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Conversion Factor (Moles to Particles)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the relationship between moles and particle count by dividing by Avogadro's number instead of multiplying. A mole represents a massive collection of items, so moving from moles to individual particles must always yield a substantially larger number.

REASONING PATH
Your ACEpath teacher’s suggested approach
Particle-to-Mole Equation Check
  • N=n⋅NA  ⟺  n=NNAN = n \cdot N_A \iff n = \frac{N}{N_A}

  • When finding total particles (NN), multiply moles (nn) by NAN_A; only divide by NAN_A when converting a known count of particles back into moles.

Physical Sanity Check
  • Individual particle counts cannot be less than 11 (a fraction of an atom or formula unit is physically impossible).

  • If your calculated particle count has a negative exponent such as 10−3210^{-32}, immediately recognize that an operation was inverted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. N=n⋅NAN = n \cdot N_A

  2. N=(1.246×10−8 mol)×(6.022×1023 formula units/mol)N = (1.246 \times 10^{-8}\text{ mol}) \times (6.022 \times 10^{23}\text{ formula units/mol})

  3. N≈7.504×1015 formula unitsN \approx 7.504 \times 10^{15}\text{ formula units}

Final answer

N=7.50×1015 formula unitsN = 7.50 \times 10^{15}\text{ formula units}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out dimensional analysis units explicitly (e.g., mol×particlesmol=particles\text{mol} \times \frac{\text{particles}}{\text{mol}} = \text{particles}) so you can visually verify that moles cancel out.

  • Perform a quick order-of-magnitude reality check: counting particles from any macroscopic or microscopic sample must produce a positive exponent (N≫1N \gg 1).

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the microgram threshold as grams and converts 1.50 micrograms by multiplying by 10^-6 g again, introducing a duplicate 10^-6 factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    1.50×10−6  μg=1.50×10−12 g1.50 \times 10^{-6}\;\mu\text{g} = 1.50 \times 10^{-12}\text{ g}

    Correct

    m=1.50×10−6 gm = 1.50 \times 10^{-6}\text{ g}

    The problem gave the detection threshold as 1.50×10−6 g1.50 \times 10^{-6}\text{ g} (which is equivalent to 1.50  μg1.50\;\mu\text{g}). By writing 1.50×10−6  μg1.50 \times 10^{-6}\;\mu\text{g} and multiplying by 10−610^{-6} again, you introduced an extra factor of 10−610^{-6}, understating the mass as 1.50×10−12 g1.50 \times 10^{-12}\text{ g}.

  2. Step 2

    n=1.50×10−12 g120.37 g/mol=1.25×10−14 moln = \frac{1.50 \times 10^{-12}\text{ g}}{120.37\text{ g/mol}} = 1.25 \times 10^{-14}\text{ mol}

    Correct

    n=1.50×10−6 g120.37 g/mol≈1.25×10−8 moln = \frac{1.50 \times 10^{-6}\text{ g}}{120.37\text{ g/mol}} \approx 1.25 \times 10^{-8}\text{ mol}

    Your formula n=mMn = \frac{m}{M} and arithmetic were executed properly, but the calculated molar amount was off by a factor of 10−610^{-6} due to the mass error in Step 1.

  3. Step 3

    N=n×NA=(1.25×10−14 mol)×(6.022×1023 mol−1)  ⟹  N=7.50×109 formula unitsN = n \times N_{\text{A}} = (1.25 \times 10^{-14}\text{ mol}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) \implies N = 7.50 \times 10^9\text{ formula units}

    Correct

    N=(1.246×10−8 mol)×(6.022×1023 mol−1)=7.50×1015 formula unitsN = (1.246 \times 10^{-8}\text{ mol}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) = 7.50 \times 10^{15}\text{ formula units}

    You correctly multiplied the moles by Avogadro's constant to find formula units, but the final value carried through the earlier 10−610^{-6} factor error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula n=mMn = \frac{m}{M} to relate mass and molar mass.

You correctly multiplied the amount in moles by Avogadro's constant (NA=6.022×1023 mol−1N_{\text{A}} = 6.022 \times 10^{23}\text{ mol}^{-1}) to obtain the number of formula units.

You rounded your final answer to three significant figures with the correct unit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Duplicate Metric Prefix Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You combined scientific notation and metric prefix conversion redundantly by taking a quantity already expressed in grams (1.50×10−6 g1.50 \times 10^{-6}\text{ g}) and multiplying it by 10−610^{-6} again as if it had been given as 1.50×10−6  μg1.50 \times 10^{-6}\;\mu\text{g}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Unit Labels and Clarifications
  • When a problem presents a value with an equivalent parenthetical form such as '1.50×10−6 g1.50 \times 10^{-6}\text{ g} (1.50  μg1.50\;\mu\text{g})', both denote the exact same quantity in different units: 1.50  μg=1.50×10−6 g1.50\;\mu\text{g} = 1.50 \times 10^{-6}\text{ g}.

  • Identify the unit attached to the scientific notation. If it already has the base unit 'g\text{g}', use that value directly without applying the prefix multiplier again.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. m=1.50×10−6 gm = 1.50 \times 10^{-6}\text{ g}

  2. n=1.50×10−6 g120.37 g/mol≈1.246×10−8 moln = \frac{1.50 \times 10^{-6}\text{ g}}{120.37\text{ g/mol}} \approx 1.246 \times 10^{-8}\text{ mol}

  3. N=(1.246×10−8 mol)×(6.022×1023 mol−1)=7.50×1015 formula unitsN = (1.246 \times 10^{-8}\text{ mol}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) = 7.50 \times 10^{15}\text{ formula units}

Final answer

Nmin=7.50×1015 formula unitsN_{\text{min}} = 7.50 \times 10^{15}\text{ formula units}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always match the numerical value with its explicitly written unit before performing unit conversions.

  • Double-check whether a given number in scientific notation is already expressed in the base unit needed for molar mass calculations (grams).

Lock it in

Similar question

01

Calculate the number of moles and formula units present in a 2.50 mg2.50\text{ mg} sample of sodium chloride (NaCl\ce{NaCl}, molar mass =58.44 g/mol= 58.44\text{ g/mol}).

Answer

n=2.50×10−3 g58.44 g/mol=4.28×10−5 moln = \frac{2.50 \times 10^{-3}\text{ g}}{58.44\text{ g/mol}} = 4.28 \times 10^{-5}\text{ mol}; N=(4.28×10−5 mol)×(6.022×1023 formula units/mol)=2.58×1019 formula unitsN = (4.28 \times 10^{-5}\text{ mol}) \times (6.022 \times 10^{23}\text{ formula units/mol}) = 2.58 \times 10^{19}\text{ formula units}.

02

A forensic test detects 3.20×10−9 g3.20 \times 10^{-9}\text{ g} of calcium carbonate (CaCOX3\ce{CaCO3}, molar mass =100.09 g/mol= 100.09\text{ g/mol}). How many CaX2+\ce{Ca^2+} ions are present in this sample?

Answer

n=3.20×10−9 g100.09 g/mol=3.20×10−11 moln = \frac{3.20 \times 10^{-9}\text{ g}}{100.09\text{ g/mol}} = 3.20 \times 10^{-11}\text{ mol}; formula units of CaCOX3=(3.20×10−11 mol)×(6.022×1023 mol−1)=1.93×1013\ce{CaCO3} = (3.20 \times 10^{-11}\text{ mol}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) = 1.93 \times 10^{13}; since each formula unit contains one CaX2+\ce{Ca^2+} ion, there are 1.93×1013  CaX2+1.93 \times 10^{13}\;\ce{Ca^2+} ions.

03

A sample of hydrated copper(II) sulfate (CuSOX4 ⋅ 5 HX2O\ce{CuSO4*5H2O}, molar mass =249.68 g/mol= 249.68\text{ g/mol}) contains 1.80×10181.80 \times 10^{18} formula units. What is the mass of this sample in milligrams?

Answer

n=1.80×10186.022×1023 mol−1=2.99×10−6 moln = \frac{1.80 \times 10^{18}}{6.022 \times 10^{23}\text{ mol}^{-1}} = 2.99 \times 10^{-6}\text{ mol}; mass m=n×M=(2.99×10−6 mol)×(249.68 g/mol)=7.46×10−4 g=0.746 mgm = n \times M = (2.99 \times 10^{-6}\text{ mol}) \times (249.68\text{ g/mol}) = 7.46 \times 10^{-4}\text{ g} = 0.746\text{ mg}.

Loading workspace…