Resources
An analytical chemistry student standardizes an ebulliometer (boiling-point elevation apparatus) to determine the molecular weight of an unknown organic compound. Pure ethanol () has a normal boiling point of and an ebullioscopic constant . A nonvolatile, nonelectrolyte solute having polar covalent character is dissolved in of pure ethanol. The resulting boiling point is measured as . (a) Calculate the molality of the solute in . (b) If of the unknown solute was added, determine its molar mass. (c) On a molecular level, explain why dissolving a nonvolatile solute with strong solute-solvent dipole interactions elevates the solvent's boiling point.
Answer and steps
Final answer
(a) . (Calculated via ; ). (b) Molar mass . (; ). (c) Dissolving nonvolatile solute particles dilutes the solvent molecules at the liquid surface, entropy of the solution is greater than the pure liquid (stabilizing the liquid phase), and favorable solute-solvent intermolecular attractions lower the escaping tendency (vapor pressure) of ethanol, requiring a higher temperature for the vapor pressure to equal atmospheric pressure.
Steps
Part (a): Calculating the Molality ()
- Determine the boiling-point elevation (): The elevation in boiling point is the difference between the boiling point of the solution () and that of the pure solvent ():
- Apply the boiling-point elevation formula: Because the solute is a nonelectrolyte, its van 't Hoff factor is . The relationship between boiling-point elevation and molality is:
- Solve for molality ():
Part (b): Determining the Molar Mass of the Solute
- Convert solvent mass to kilograms:
- Calculate the amount of dissolved solute in moles (): From the definition of molality, :
- Compute the molar mass ():
Part (c): Molecular-Level Explanation of Boiling-Point Elevation
A liquid boils when its vapor pressure equals atmospheric pressure. Boiling-point elevation occurs due to two interconnected molecular factors:
- Surface Dilution: Nonvolatile solute particles occupy part of the liquid's surface area. This reduces the fraction of surface sites available to volatile ethanol molecules, directly lowering the rate of vaporization.
- Solute-Solvent Intermolecular Forces: Strong dipole-dipole interactions between polar solute molecules and polar ethanol molecules () stabilize the liquid phase. These attractive forces decrease the escaping tendency of ethanol molecules into the gas phase.
Together, these effects lower the solution's vapor pressure at any given temperature compared to pure ethanol. As a result, the solution must be heated to a higher temperature before its vapor pressure matches the external atmospheric pressure, leading to an elevated boiling point.
Typical errors
01 The student forgets to convert the mass of ethanol from grams to kilograms when calculating moles of solute from molality.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Molality is defined per kilogram of solvent. Multiplying directly by grams () does not cancel the mass units; you must convert to first.
- Step 3Correct
Your formula for molar mass () is correct, but using instead of carried over the unit-conversion error.
- Step 4
Solute particles occupy the surface and attractive dipole-dipole forces reduce solvent evaporation, lowering vapor pressure. The solution must be heated to a higher temperature to reach atmospheric pressure, raising the boiling point.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the boiling point elevation and the molality .
You correctly applied the relationship to determine molar mass from moles.
You clearly articulated the connection between intermolecular attractions, vapor-pressure reduction, and elevated boiling point.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the solvent mass directly in grams () instead of kilograms () when solving for moles.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked dimensional unit cancellation between molality () and solvent mass, leading to a missing factor of ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Molality Unit Alignment
Molality is strictly defined as .
Always convert solvent mass into kilograms () before multiplying by molality.
- Perform a Sanity Check on Molar Mass
Small organic molecules typically have molar masses between and .
If your calculated molar mass is a fraction of a gram per mole (such as ), check immediately whether grams and kilograms were mixed up.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the mass of ethanol solvent from grams to kilograms: .
Calculate the moles of unknown solute: .
Calculate the molar mass using the measured solute mass: .
Molar mass
02 The student uses the solution's absolute boiling point instead of the boiling-point elevation in the ebullioscopic equation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You substituted the absolute boiling point of the solution () directly into the equation instead of the temperature elevation .
- Step 2Correct
Your formulas and conversions for solvent mass, moles of solute, and molar mass are completely correct, but the final value was affected by the molality from Part (a).
- Step 3
Nonvolatile solute molecules lower the vapor pressure of the solvent because fewer solvent molecules are at the surface. A higher temperature is required for vapor pressure to reach external pressure, elevating the boiling point.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted grams of solvent to kilograms accurately.
You applied the relationship between molality, moles, and mass correctly to solve for molar mass.
You correctly connected surface dilution to vapor pressure depression and boiling point elevation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set equal to the final solution temperature rather than subtracting the pure solvent's boiling point .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing a state property (, absolute temperature) with a colligative change (, the temperature difference caused by adding solute).
REASONING PATH
Your ACEpath teacher’s suggested approach- Colligative Elevation vs. Absolute Temperature
Always subtract the normal boiling point of the pure solvent from the solution's boiling point before dividing by .
- Sanity Check on Molality and Molar Mass
A molality of implies nearly of solute per kilogram of solvent, yielding an unrealistically small organic molar mass (, lighter than helium).
If an organic solute's calculated molar mass is under , check whether your was too large by forgetting to subtract .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the boiling-point elevation: .
Compute the true molality: .
Find moles of solute in of ethanol: .
Calculate molar mass: .
(a) ; (b) .
03 The student misattributes boiling-point elevation to the boiling of the solute rather than vapor pressure lowering of the solvent.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
The boiling point increases because the solute has a higher boiling point than ethanol and takes more heat to boil. Therefore, adding the solute directly raises the average boiling temperature of the mixture.
CorrectBoiling occurs when the solvent's vapor pressure equals atmospheric pressure. Dissolving a nonvolatile solute introduces favorable solute-solvent intermolecular attractions and dilutes solvent molecules at the liquid surface, decreasing the solvent's escaping tendency (vapor pressure). A higher temperature is therefore required to bring the solution's vapor pressure up to external pressure.
Boiling-point elevation is a colligative property of the solvent, not an average of the components' boiling points. Because the solute is nonvolatile, it does not vaporize; instead, solute-solvent interactions and surface dilution lower the solvent's vapor pressure, which requires heating the solution to a higher temperature to reach atmospheric pressure.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the boiling point elevation .
You correctly applied the formula to determine the molality.
You accurately converted grams of solvent to kilograms and computed the solute's molar mass.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated boiling point elevation as a weighted average of two boiling liquids rather than recognizing it as a colligative phenomenon caused by vapor-pressure lowering of the solvent.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define the Condition for Boiling
A liquid boils when its vapor pressure equals atmospheric pressure ().
Always connect boiling point changes back to changes in the liquid's equilibrium vapor pressure.
- Identify Nonvolatile Solute Behavior
A nonvolatile solute has a negligible vapor pressure and does not boil off; it impedes solvent vaporization through surface dilution and solute-solvent attractions.
Explain boiling-point elevation in terms of solvent escaping tendency rather than solute boiling characteristics.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the boiling condition: A liquid boils when its vapor pressure equals atmospheric pressure ().
Explain the vapor pressure lowering: Nonvolatile solute particles occupy surface sites and establish attractive dipole-dipole interactions with ethanol molecules, decreasing ethanol's escaping tendency into the vapor phase.
Connect lowering to temperature elevation: Because the solution's vapor pressure is lower at any given temperature, the solution must be heated to a higher temperature before reaches external atmospheric pressure.
Boiling occurs when solvent vapor pressure equals atmospheric pressure. Adding a nonvolatile solute dilutes the solvent at the surface and forms strong solute-solvent dipole attractions, lowering the vapor pressure of ethanol. Consequently, a higher temperature is required for the vapor pressure to reach atmospheric pressure, elevating the boiling point.
Lock it in
What is the SI unit required for solvent mass in the molality equation ?
Kilograms (). Remember: molality is moles per kilogram of solvent, so divide grams of solvent by .
Similar question
A solution contains of glucose () dissolved in of water. Calculate the molality of the solution.
Answer
. Steps: . Convert solvent mass: . Then .
A nonvolatile molecular solute increases the boiling point of pure benzene (, ) to when of the solute is dissolved in of benzene. Determine the molar mass of the solute.
Answer
. Steps: . Molality . Mass of benzene . Moles of solute . Molar mass .
When of a nonvolatile organic compound is dissolved in of carbon tetrachloride (), the boiling point elevation is . Calculate the molar mass of the compound and state the effect on the result if the student mistakenly assumed the solvent mass was .
Answer
; the mistaken molar mass would be (underestimated by a factor of 1000). Steps: . Correct moles . .