Resources

Solid calcium phosphate dissociates in water according to the equilibrium Ca3(PO4)2(s)⇌3Ca2+(aq)+2PO43−(aq)\text{Ca}_3(\text{PO}_4)_2(s) \rightleftharpoons 3\text{Ca}^{2+}(aq) + 2\text{PO}_4^{3-}(aq). Write the solubility product constant (KspK_{sp}) expression. If an analytical water sample at equilibrium is reported to have [Ca2+]=8.02 mg/L[\text{Ca}^{2+}] = 8.02\text{ mg/L} and [PO43−]=12.7 mg/L[\text{PO}_4^{3-}] = 12.7\text{ mg/L}, convert both ionic concentrations into molarity (molar masses: Ca2+=40.08 g/mol\text{Ca}^{2+} = 40.08\text{ g/mol}, PO43−=94.97 g/mol\text{PO}_4^{3-} = 94.97\text{ g/mol}), and evaluate the numerical value of KspK_{sp}.

Answer and steps

Final answer

Ksp=[Ca2+]3[PO43−]2K_{sp} = [\text{Ca}^{2+}]^3[\text{PO}_4^{3-}]^2; [Ca2+]=2.00×10−4 M[\text{Ca}^{2+}] = 2.00 \times 10^{-4}\text{ M}; [PO43−]=1.34×10−4 M[\text{PO}_4^{3-}] = 1.34 \times 10^{-4}\text{ M}; Ksp=(2.00×10−4)3(1.34×10−4)2=1.44×10−19K_{sp} = (2.00 \times 10^{-4})^3(1.34 \times 10^{-4})^2 = 1.44 \times 10^{-19}

Steps

01

Write the solubility product constant (KspK_{sp}) expression

For a heterogeneous dissolution equilibrium, the pure solid phase is omitted from the equilibrium expression because its activity is equal to 11. Each dissolved ion concentration is raised to the power of its stoichiometric coefficient from the balanced chemical equation:

CaX3(POX4)X2(s)⇌3 CaX2+(aq)+2 POX4X3−(aq)\ce{Ca3(PO4)2(s) <=> 3Ca^{2+}(aq) + 2PO4^{3-}(aq)}

Ksp=[CaX2+]3[POX4X3−]2K_{sp} = [\ce{Ca^{2+}}]^3[\ce{PO4^{3-}}]^2


02

Convert ion concentrations from mg/L\text{mg/L} to molarity (mol/L\text{mol/L})

To convert mass concentration in milligrams per liter (mg/L\text{mg/L}) to molarity (M\text{M} or mol/L\text{mol/L}), first convert milligrams to grams (1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g}), then divide by the respective molar mass (MM):

Molarity (mol/L)=Concentration in mg/L×10−3 g/mgMolar Mass in g/mol\text{Molarity } (\text{mol/L}) = \frac{\text{Concentration in mg/L} \times 10^{-3}\text{ g/mg}}{\text{Molar Mass in g/mol}}

  • For calcium ion (CaX2+\ce{Ca^{2+}}): [CaX2+]=8.02×10−3 g/L40.08 g/mol=2.00×10−4 M[\ce{Ca^{2+}}] = \frac{8.02 \times 10^{-3}\text{ g/L}}{40.08\text{ g/mol}} = 2.00 \times 10^{-4}\text{ M}
  • For phosphate ion (POX4X3−\ce{PO4^{3-}}): [POX4X3−]=12.7×10−3 g/L94.97 g/mol=1.34×10−4 M[\ce{PO4^{3-}}] = \frac{12.7 \times 10^{-3}\text{ g/L}}{94.97\text{ g/mol}} = 1.34 \times 10^{-4}\text{ M}

03

Calculate the numerical value of KspK_{sp}

Substitute the calculated molar concentrations into the solubility product expression:

Ksp=[CaX2+]3[POX4X3−]2K_{sp} = [\ce{Ca^{2+}}]^3[\ce{PO4^{3-}}]^2

Ksp=(2.00×10−4)3(1.34×10−4)2K_{sp} = (2.00 \times 10^{-4})^3(1.34 \times 10^{-4})^2

Evaluate each factor:

  • (2.00×10−4)3=8.00×10−12(2.00 \times 10^{-4})^3 = 8.00 \times 10^{-12}
  • (1.34×10−4)2≈1.796×10−8(1.34 \times 10^{-4})^2 \approx 1.796 \times 10^{-8}

Multiply the terms together:

Ksp=(8.00×10−12)(1.796×10−8)=1.44×10−19K_{sp} = (8.00 \times 10^{-12})(1.796 \times 10^{-8}) = 1.44 \times 10^{-19}

Common Pitfall: When equilibrium concentrations of the individual ions are already given by an analytical measurement, do not multiply them by their stoichiometric coefficients inside the brackets (e.g., do not write (3×[CaX2+])(3 \times [\ce{Ca^{2+}}])). Stoichiometric multipliers are only used when generating concentrations from a single unknown solubility variable ss.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the stoichiometric coefficients by omitting the exponents in the solubility product expression, leading to K_sp = [Ca²⁺][PO₄³⁻] = 2.68 × 10⁻⁸.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ksp=[Ca2+][PO43−]K_{sp} = [\text{Ca}^{2+}][\text{PO}_4^{3-}]

    Correct

    Ksp=[Ca2+]3[PO43−]2K_{sp} = [\text{Ca}^{2+}]^3[\text{PO}_4^{3-}]^2

    In a heterogeneous solubility equilibrium expression, the stoichiometric coefficient of each dissolved ion becomes its exponent. For Ca3(PO4)2(s)⇌3Ca2+(aq)+2PO43−(aq)\text{Ca}_3(\text{PO}_4)_2(s) \rightleftharpoons 3\text{Ca}^{2+}(aq) + 2\text{PO}_4^{3-}(aq), [extCa2+][ ext{Ca}^{2+}] must be cubed and [extPO43−][ ext{PO}_4^{3-}] must be squared.

  2. Step 2

    [Ca2+]=8.02×10−340.08=2.00×10−4 mol/L  ⟹  [PO43−]=12.7×10−394.97=1.34×10−4 mol/L[\text{Ca}^{2+}] = \frac{8.02 \times 10^{-3}}{40.08} = 2.00 \times 10^{-4}\text{ mol/L} \implies [\text{PO}_4^{3-}] = \frac{12.7 \times 10^{-3}}{94.97} = 1.34 \times 10^{-4}\text{ mol/L}

  3. Step 3

    Ksp=(2.00×10−4)(1.34×10−4)=2.68×10−8K_{sp} = (2.00 \times 10^{-4})(1.34 \times 10^{-4}) = 2.68 \times 10^{-8}

    Correct

    Ksp=(2.00×10−4)3(1.34×10−4)2=1.44×10−19K_{sp} = (2.00 \times 10^{-4})^3(1.34 \times 10^{-4})^2 = 1.44 \times 10^{-19}

    Your arithmetic matches your written KspK_{sp} expression, but because the stoichiometric exponents were missing, the computed value is incorrect. Raising the concentrations to their correct powers gives 1.44×10−191.44 \times 10^{-19}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted mass concentrations in mg/L\text{mg/L} to molar concentrations in mol/L\text{mol/L}.

You correctly identified that the undissolved solid reactant is omitted from the KspK_{sp} expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of stoichiometric exponents in equilibrium expression

You treated the equilibrium expression as a simple product of ion concentrations with implied exponents of 1 rather than applying the balanced coefficients as powers.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the law of mass action with a simple product of concentrations, forgetting that coefficients in the balanced chemical reaction translate directly into exponents in the equilibrium constant expression.

REASONING PATH
Your ACEpath teacher’s suggested approach
Law of Mass Action Exponents
  • For the dissociation aA(s)⇌bBm+(aq)+cCn−(aq)a\text{A}(s) \rightleftharpoons b\text{B}^{m+}(aq) + c\text{C}^{n-}(aq), the solubility product expression is Ksp=[Bm+]b[Cn−]cK_{sp} = [\text{B}^{m+}]^b[\text{C}^{n-}]^c.

  • Always circle the stoichiometric coefficients in the balanced equation and write them directly as powers above the corresponding ion brackets.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the equilibrium expression using coefficients as exponents: Ksp=[Ca2+]3[PO43−]2K_{sp} = [\text{Ca}^{2+}]^3[\text{PO}_4^{3-}]^2.

  2. Substitute the calculated molar concentrations: Ksp=(2.00×10−4)3(1.34×10−4)2K_{sp} = (2.00 \times 10^{-4})^3(1.34 \times 10^{-4})^2.

  3. Calculate the powers: (2.00×10−4)3=8.00×10−12(2.00 \times 10^{-4})^3 = 8.00 \times 10^{-12} and (1.34×10−4)2=1.80×10−8(1.34 \times 10^{-4})^2 = 1.80 \times 10^{-8}.

  4. Multiply the factors: Ksp=(8.00×10−12)(1.796×10−8)=1.44×10−19K_{sp} = (8.00 \times 10^{-12})(1.796 \times 10^{-8}) = 1.44 \times 10^{-19}.

Final answer

Ksp=[Ca2+]3[PO43−]2=1.44×10−19K_{sp} = [\text{Ca}^{2+}]^3[\text{PO}_4^{3-}]^2 = 1.44 \times 10^{-19}

NEXT STEPS
Final Takeaways from Your Teacher
  • When setting up any equilibrium expression, verify that every dissolved product has an exponent matching its stoichiometric coefficient from the balanced equation.

  • Distinguish between writing the general KspK_{sp} expression (coefficients as exponents) and expressing ion concentrations in terms of molar solubility ss (coefficients as both multipliers and exponents).

OverviewACEpath Teacher's Diagnosis

02 The student erroneously multiplies the given equilibrium concentrations by the stoichiometric coefficients before raising them to powers, confusing analytical ion concentrations with standard molar solubility relationships.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ksp=[Ca2+]3[PO43−]2K_{sp} = [\text{Ca}^{2+}]^3[\text{PO}_4^{3-}]^2

  2. Step 2

    [Ca2+]=8.02×10−340.08=2.00×10−4 mol/L  ⟹  [PO43−]=12.7×10−394.97=1.34×10−4 mol/L[\text{Ca}^{2+}] = \frac{8.02 \times 10^{-3}}{40.08} = 2.00 \times 10^{-4}\text{ mol/L} \implies [\text{PO}_4^{3-}] = \frac{12.7 \times 10^{-3}}{94.97} = 1.34 \times 10^{-4}\text{ mol/L}

  3. Step 3

    Ksp=(3×2.00×10−4)3(2×1.34×10−4)2  ⟹  Ksp=(6.00×10−4)3(2.68×10−4)2=1.55×10−17K_{sp} = (3 \times 2.00 \times 10^{-4})^3(2 \times 1.34 \times 10^{-4})^2 \implies K_{sp} = (6.00 \times 10^{-4})^3(2.68 \times 10^{-4})^2 = 1.55 \times 10^{-17}

    Correct

    Ksp=(2.00×10−4)3(1.34×10−4)2=1.44×10−19K_{sp} = (2.00 \times 10^{-4})^3(1.34 \times 10^{-4})^2 = 1.44 \times 10^{-19}

    You multiplied the equilibrium ion concentrations by 33 and 22 inside the parentheses. When equilibrium concentrations of the individual ions are already known, substitute them directly into [Ca2+]3[PO43−]2[\text{Ca}^{2+}]^3[\text{PO}_4^{3-}]^2 without adding extra stoichiometric multipliers.

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct solubility product constant expression with the proper stoichiometric powers.

You correctly converted the analytical concentrations from mg/L\text{mg/L} to mol/L\text{mol/L} using each ion's molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient double-counting

You inserted stoichiometric multipliers (33 and 22) directly into the bracketed concentration values.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused substituting an analytical ion concentration with substituting molar solubility ss. Stoichiometric multipliers like 3s3s and 2s2s are used only when defining unknown ion concentrations in terms of dissolved formula units (ss), whereas an analytical measurement already represents the complete concentration of that specific ion in solution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direct Concentration vs. Molar Solubility
  • If a problem states the equilibrium concentration of an individual ion directly (e.g., [An+][\text{A}^{n+}]), substitute that value directly as [An+][\text{A}^{n+}], without multiplying it by its coefficient.

  • Reserve multipliers (n⋅sn \cdot s) exclusively for problems where you define ion concentrations from a single unknown solubility variable ss.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the evaluated equilibrium molarities: [Ca2+]=2.00×10−4 M[\text{Ca}^{2+}] = 2.00 \times 10^{-4}\text{ M} and [PO43−]=1.34×10−4 M[\text{PO}_4^{3-}] = 1.34 \times 10^{-4}\text{ M}.

  2. Substitute directly into the KspK_{sp} expression: Ksp=[Ca2+]3[PO43−]2=(2.00×10−4)3(1.34×10−4)2K_{sp} = [\text{Ca}^{2+}]^3[\text{PO}_4^{3-}]^2 = (2.00 \times 10^{-4})^3(1.34 \times 10^{-4})^2.

  3. Calculate the powers: (2.00×10−4)3=8.00×10−12(2.00 \times 10^{-4})^3 = 8.00 \times 10^{-12} and (1.34×10−4)2=1.796×10−8(1.34 \times 10^{-4})^2 = 1.796 \times 10^{-8}.

  4. Multiply the factors: Ksp=(8.00×10−12)(1.796×10−8)=1.44×10−19K_{sp} = (8.00 \times 10^{-12})(1.796 \times 10^{-8}) = 1.44 \times 10^{-19}.

Final answer

Ksp=1.44×10−19K_{sp} = 1.44 \times 10^{-19}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether a given number represents a measured ion concentration or the molar solubility of the salt.

  • When you see brackets like [Ca2+][\text{Ca}^{2+}], remember that the entire number inside the brackets is the concentration of that ion, and the coefficient appears only as an exponent outside.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert milligrams per liter to grams per liter when calculating molarity, resulting in concentrations and a K_sp value that are off by a factor of 10¹⁵.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ksp=[CaX2+]3[POX4X3−]2K_{sp} = [\ce{Ca^{2+}}]^3[\ce{PO4^{3-}}]^2

  2. Step 2

    [CaX2+]=8.02/40.08=0.200 mol/L  ⟹  [POX4X3−]=12.7/94.97=0.134 mol/L[\ce{Ca^{2+}}] = 8.02 / 40.08 = 0.200\text{ mol/L} \implies [\ce{PO4^{3-}}] = 12.7 / 94.97 = 0.134\text{ mol/L}

    Correct

    [CaX2+]=8.02×10−3 g/L40.08 g/mol=2.00×10−4 M  ⟹  [POX4X3−]=12.7×10−3 g/L94.97 g/mol=1.34×10−4 M[\ce{Ca^{2+}}] = \frac{8.02 \times 10^{-3}\text{ g/L}}{40.08\text{ g/mol}} = 2.00 \times 10^{-4}\text{ M} \implies [\ce{PO4^{3-}}] = \frac{12.7 \times 10^{-3}\text{ g/L}}{94.97\text{ g/mol}} = 1.34 \times 10^{-4}\text{ M}

    You divided the mass concentrations by molar mass without converting milligrams to grams (1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g}), making both concentrations 10310^3 times too large.

  3. Step 3

    Ksp=(0.200)3(0.134)2=1.44×10−4K_{sp} = (0.200)^3(0.134)^2 = 1.44 \times 10^{-4}

    Correct

    Ksp=(2.00×10−4)3(1.34×10−4)2=1.44×10−19K_{sp} = (2.00 \times 10^{-4})^3(1.34 \times 10^{-4})^2 = 1.44 \times 10^{-19}

    You applied the powers and multiplied the terms correctly according to your formula, but the result is inaccurate because it propagated the unconverted molarity values from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the heterogeneous equilibrium expression Ksp=[CaX2+]3[POX4X3−]2K_{sp} = [\ce{Ca^{2+}}]^3[\ce{PO4^{3-}}]^2 omitting the pure solid.

You correctly identified that the analytical numbers represent total equilibrium ion concentrations without improperly adding inner stoichiometric multipliers.

You carried out the arithmetic operations and exponentiation accurately on your written numbers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission in Molarity Calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You divided the concentration directly by the molar mass in g/mol\text{g/mol} without first converting the mass unit from milligrams (mg\text{mg}) to grams (g\text{g}). Because 1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g}, directly dividing mg/L\text{mg/L} by g/mol\text{g/mol} yields millimoles per liter (mmol/L\text{mmol/L}) rather than moles per liter (M\text{M}). When raised to the powers of 33 and 22, this uncorrected factor of 10310^3 per ion compound magnified by (103)3×(103)2=1015(10^3)^3 \times (10^3)^2 = 10^{15}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Alignment for Molarity
  • Molarity is defined as moles of solute per liter of solution (mol/L\text{mol/L}). Because molar mass has units of g/mol\text{g/mol}, mass concentrations must be converted to grams per liter (g/L\text{g/L}) before dividing by molar mass.

  • Always set up dimensional analysis explicitly: M=mgL×1 g1000 mg×1 molmolar mass (g)\text{M} = \frac{\text{mg}}{\text{L}} \times \frac{1\text{ g}}{1000\text{ mg}} \times \frac{1\text{ mol}}{\text{molar mass (g)}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert mg/L\text{mg/L} to g/L\text{g/L} for each ion: [CaX2+]=8.02×10−3 g/L[\ce{Ca^{2+}}] = 8.02 \times 10^{-3}\text{ g/L} and [POX4X3−]=1.27×10−2 g/L[\ce{PO4^{3-}}] = 1.27 \times 10^{-2}\text{ g/L}.

  2. Divide each mass concentration by its respective molar mass: [CaX2+]=8.02×10−3 g/L40.08 g/mol=2.00×10−4 M[\ce{Ca^{2+}}] = \frac{8.02 \times 10^{-3}\text{ g/L}}{40.08\text{ g/mol}} = 2.00 \times 10^{-4}\text{ M} and [POX4X3−]=1.27×10−2 g/L94.97 g/mol=1.34×10−4 M[\ce{PO4^{3-}}] = \frac{1.27 \times 10^{-2}\text{ g/L}}{94.97\text{ g/mol}} = 1.34 \times 10^{-4}\text{ M}.

  3. Substitute the molar concentrations into the KspK_{sp} expression: Ksp=(2.00×10−4)3(1.34×10−4)2K_{sp} = (2.00 \times 10^{-4})^3(1.34 \times 10^{-4})^2.

  4. Evaluate the powers: (2.00×10−4)3=8.00×10−12(2.00 \times 10^{-4})^3 = 8.00 \times 10^{-12} and (1.34×10−4)2=1.80×10−8(1.34 \times 10^{-4})^2 = 1.80 \times 10^{-8}.

  5. Multiply the factors: Ksp=1.44×10−19K_{sp} = 1.44 \times 10^{-19}.

Final answer

Ksp=1.44×10−19K_{sp} = 1.44 \times 10^{-19}

NEXT STEPS
Final Takeaways from Your Teacher
  • When given concentrations in non-standard units such as mg/L\text{mg/L} or μg/L\mu\text{g/L}, write out the unit-cancellation factor before entering values into your calculator.

  • Review heterogeneous equilibrium problems to reinforce that analytical concentrations already represent equilibrium values [MXn+][\ce{M^{n+}}] and do not require stoichiometric pre-multipliers inside the brackets.

Lock it in

Similar question

01

Write the solubility product constant (KspK_{sp}) expression for solid silver chromate dissolving according to Ag2CrO4(s)⇌2Ag+(aq)+CrO42−(aq)\text{Ag}_2\text{CrO}_4(s) \rightleftharpoons 2\text{Ag}^+(aq) + \text{CrO}_4^{2-}(aq). If an equilibrium solution contains [Ag+]=1.3×10−4 M[\text{Ag}^+] = 1.3 \times 10^{-4}\text{ M} and [CrO42−]=6.5×10−5 M[\text{CrO}_4^{2-}] = 6.5 \times 10^{-5}\text{ M}, calculate KspK_{sp}.

Answer

Ksp=[Ag+]2[CrO42−]=(1.3×10−4)2(6.5×10−5)=1.1×10−12K_{sp} = [\text{Ag}^+]^2[\text{CrO}_4^{2-}] = (1.3 \times 10^{-4})^2(6.5 \times 10^{-5}) = 1.1 \times 10^{-12}.

02

Solid aluminum hydroxide dissolves according to Al(OH)3(s)⇌Al3+(aq)+3OH−(aq)\text{Al}(\text{OH})_3(s) \rightleftharpoons \text{Al}^{3+}(aq) + 3\text{OH}^-(aq). Write the KspK_{sp} expression. At a measured pH, an equilibrium solution has [Al3+]=2.0×10−9 M[\text{Al}^{3+}] = 2.0 \times 10^{-9}\text{ M} and [OH−]=1.0×10−8 M[\text{OH}^-] = 1.0 \times 10^{-8}\text{ M}. Calculate KspK_{sp}.

Answer

Ksp=[Al3+][OH−]3=(2.0×10−9)(1.0×10−8)3=2.0×10−33K_{sp} = [\text{Al}^{3+}][\text{OH}^-]^3 = (2.0 \times 10^{-9})(1.0 \times 10^{-8})^3 = 2.0 \times 10^{-33}.

03

A saturated solution of iron(III) phosphate has an analytical concentration of Fe3+\text{Fe}^{3+} of 0.0558 mg/L0.0558\text{ mg/L} (M=55.85 g/molM = 55.85\text{ g/mol}) and PO43−\text{PO}_4^{3-} of 0.0950 mg/L0.0950\text{ mg/L} (M=94.97 g/molM = 94.97\text{ g/mol}) from the equilibrium FePO4(s)⇌Fe3+(aq)+PO43−(aq)\text{FePO}_4(s) \rightleftharpoons \text{Fe}^{3+}(aq) + \text{PO}_4^{3-}(aq). Compare the role of exponents here with those in Ca3(PO4)2\text{Ca}_3(\text{PO}_4)_2, and calculate KspK_{sp} for FePO4\text{FePO}_4.

Answer

Both coefficients are 1, so the exponents are 1: Ksp=[Fe3+][PO43−]K_{sp} = [\text{Fe}^{3+}][\text{PO}_4^{3-}]. [Fe3+]=1.00×10−6 M[\text{Fe}^{3+}] = 1.00 \times 10^{-6}\text{ M}, [PO43−]=1.00×10−6 M[\text{PO}_4^{3-}] = 1.00 \times 10^{-6}\text{ M}. Ksp=(1.00×10−6)(1.00×10−6)=1.00×10−12K_{sp} = (1.00 \times 10^{-6})(1.00 \times 10^{-6}) = 1.00 \times 10^{-12}.

Loading workspace…