Resources

A natural mineral water sample contains 485 mg/L485\text{ mg/L} of calcium hydrogen carbonate, Ca(HCO3)2\text{Ca(HCO}_3)_2. (a) State the alternative common name still recognized by IUPAC for the hydrogen carbonate ion. (b) Convert this concentration into millimoles per liter (mmol/L\text{mmol/L}) of calcium hydrogen carbonate (molar mass = 162.11 g/mol162.11\text{ g/mol}).

Answer and steps

Final answer

(a) Bicarbonate ion; (b) 2.99 mmol/L2.99\text{ mmol/L}

Steps

Part (a): Identify the Common Name for the Ion

The systematic IUPAC name for the polyatomic ion HCOX3X−\ce{HCO3-} is hydrogen carbonate.

An older, widely used traditional name that IUPAC still accepts is the bicarbonate ion (often used in everyday contexts such as "sodium bicarbonate").

Naming Rule: The prefix bi- historically indicated the presence of an acidic hydrogen atom bonded to an oxyanion (e.g., hydrogen sulfate HSOX4X−\ce{HSO4-} is also known as bisulfate).


Part (b): Convert Concentration to mmol/L\text{mmol/L}

  1. Understand the Units: The concentration is given as 485 mg/L485\text{ mg/L}, and the target unit is mmol/L\text{mmol/L}. Using the molar mass of calcium hydrogen carbonate (Ca(HCOX3)X2\ce{Ca(HCO3)2}): M=162.11 g/mol=162.11 mg/mmolM = 162.11\text{ g/mol} = 162.11\text{ mg/mmol}
  2. Calculate the Molar Concentration: Divide the mass concentration by the molar mass: Concentration in mmol/L=Concentration in mg/LMolar mass in mg/mmol\text{Concentration in mmol/L} = \frac{\text{Concentration in mg/L}}{\text{Molar mass in mg/mmol}}

    Concentration=485 mg/L162.11 mg/mmol≈2.9918 mmol/L\text{Concentration} = \frac{485\text{ mg/L}}{162.11\text{ mg/mmol}} \approx 2.9918\text{ mmol/L}

  3. Round to Significant Figures: The given value 485 mg/L485\text{ mg/L} has three significant figures, so round the final result to three significant figures: Concentration=2.99 mmol/L\text{Concentration} = 2.99\text{ mmol/L}

Common Pitfall: A common mistake is converting milligrams directly to grams without converting moles to millimoles, which adds unnecessary conversion steps. Remembering that 1 g/mol=1 mg/mmol1\text{ g/mol} = 1\text{ mg/mmol} allows direct conversion between mg/L\text{mg/L} and mmol/L\text{mmol/L}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the hydrogen carbonate ion (bicarbonate) with the carbonate ion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Carbonate

    Correct

    Bicarbonate (or bicarbonate ion)

    You wrote "Carbonate", which corresponds to the COX3X2−\ce{CO3^2-} ion. The hydrogen carbonate ion (HCOX3X−\ce{HCO3-}) has the recognized common name bicarbonate.

  2. Step 2

    Concentration=485 mg/L/162.11 g/mol  ⟹  =2.99 mmol/L\text{Concentration} = 485\text{ mg/L} / 162.11\text{ g/mol} \implies = 2.99\text{ mmol/L}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted mg/L\text{mg/L} to mmol/L\text{mmol/L} using the given molar mass.

You rounded the final concentration properly to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Nomenclature confusion between oxyanion and hydrogen oxyanion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You omitted the prefix "bi-" in traditional chemical nomenclature, confusing the unprotonated oxyanion (carbonate, COX3X2−\ce{CO3^2-}) with the singly protonated oxyanion (hydrogen carbonate or bicarbonate, HCOX3X−\ce{HCO3-}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the meaning of the "bi-" prefix
  • In older nomenclature, the prefix "bi-" indicates the addition of one hydrogen ion (HX+\ce{H+}) to an oxyanion.

  • Whenever you see "hydrogen [oxyanion]", remember its common alternative uses "bi-" (e.g., hydrogen carbonate = bicarbonate, hydrogen sulfate = bisulfate).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the formula and systematic name of the ion: HCOX3X−\ce{HCO3-} is hydrogen carbonate.

  2. Apply the traditional IUPAC-recognized common naming convention: replacing "hydrogen" with "bi-" gives bicarbonate.

Final answer

(a) Bicarbonate ion; (b) 2.99 mmol/L2.99\text{ mmol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the traditional "bi-" prefix rules for polyatomic ions (such as bicarbonate, bisulfate, and bisulfite).

  • Practice identifying the formulas and charges of oxyanions versus their hydrogen-containing counterparts.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies the mass concentration by the molar mass instead of dividing by it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bicarbonate\text{Bicarbonate}

  2. Step 2

    Concentration=485 mg/L×162.11 g/mol  ⟹  =78623.35 mmol/L\text{Concentration} = 485\text{ mg/L} \times 162.11\text{ g/mol} \implies = 78623.35\text{ mmol/L}

    Correct

    Concentration=485 mg/L162.11 mg/mmol≈2.99 mmol/L\text{Concentration} = \frac{485\text{ mg/L}}{162.11\text{ mg/mmol}} \approx 2.99\text{ mmol/L}

    To convert mass concentration to molar concentration, you must divide by molar mass (n=mMn = \frac{m}{M}). Multiplying by molar mass does not cancel the mass units.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that bicarbonate is the common name for hydrogen carbonate.

You correctly identified the given numerical values for mass concentration (485 mg/L485\text{ mg/L}) and molar mass (162.11 g/mol162.11\text{ g/mol}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Operation in Unit Conversion

You set up a multiplication between mass concentration and molar mass rather than a division.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the relationship between mass, moles, and molar mass. Because molar mass has units of g/mol\text{g/mol} (or mg/mmol\text{mg/mmol}), converting from mass to amount of substance requires dividing mass by molar mass: amount (mmol)=mass (mg)molar mass (mg/mmol)\text{amount (mmol)} = \frac{\text{mass (mg)}}{\text{molar mass (mg/mmol)}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Always track units as algebraic factors to ensure unwanted units cancel.

  • Write out mgL×mmolmg=mmolL\frac{\text{mg}}{\text{L}} \times \frac{\text{mmol}}{\text{mg}} = \frac{\text{mmol}}{\text{L}} to confirm that molar mass must be in the denominator.

Molar Mass Equivalence
  • 1 g/mol=1 mg/mmol1\text{ g/mol} = 1\text{ mg/mmol}.

  • Express molar mass directly as 162.11 mg/mmol162.11\text{ mg/mmol} when working with mg/L\text{mg/L} to convert straight to mmol/L\text{mmol/L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the molar mass in matching metric prefixes: M=162.11 g/mol=162.11 mg/mmolM = 162.11\text{ g/mol} = 162.11\text{ mg/mmol}.

  2. Divide the mass concentration by the molar mass: c=485 mg/L162.11 mg/mmol≈2.9918 mmol/Lc = \frac{485\text{ mg/L}}{162.11\text{ mg/mmol}} \approx 2.9918\text{ mmol/L}.

  3. Round to three significant figures to match the given value of 485 mg/L485\text{ mg/L}.

Final answer

(a) Bicarbonate ion; (b) 2.99 mmol/L2.99\text{ mmol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using dimensional analysis to set up conversion factors so units cancel out properly.

  • Check that your final numerical value makes physical sense: mineral water solute concentrations are typically small numbers of millimoles per liter, not tens of thousands.

OverviewACEpath Teacher's Diagnosis

03 The student improperly factors in a factor of 1000 during unit conversion, dividing by 1000 instead of recognizing that mg/L divided by g/mol directly yields mmol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bicarbonate\text{Bicarbonate}

  2. Step 2

    485 mg/L=0.485 g/L  ⟹  0.485/162.11=0.00299485\text{ mg/L} = 0.485\text{ g/L} \implies 0.485 / 162.11 = 0.00299

  3. Step 3

    Concentration=0.00299/1000=0.00000299 mmol/L\text{Concentration} = 0.00299 / 1000 = 0.00000299\text{ mmol/L}

    Correct

    Concentration=0.00299 mol/L×1000 mmol/mol=2.99 mmol/L\text{Concentration} = 0.00299\text{ mol/L} \times 1000\text{ mmol/mol} = 2.99\text{ mmol/L}

    Since 1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}, converting from mol/L\text{mol/L} to mmol/L\text{mmol/L} requires multiplying by 10001000, not dividing by 10001000.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the common name bicarbonate for the hydrogen carbonate ion.

You correctly converted 485 mg/L485\text{ mg/L} to 0.485 g/L0.485\text{ g/L}.

You correctly used the molar mass 162.11 g/mol162.11\text{ g/mol} to find the molarity in mol/L\text{mol/L}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted metric prefix conversion

You divided by 1000 instead of multiplying by 1000 when converting moles to millimoles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the direction of the metric prefix conversion factor between the base unit (mol) and the milli-prefix unit (mmol), forgetting that a smaller unit yields a larger numerical value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Multiplier
  • 1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}, so mmol=mol×1000\text{mmol} = \text{mol} \times 1000.

  • Multiply by 10001000 when going from moles to millimoles, or check that your numerical value becomes larger because millimoles are smaller units.

Direct Ratio Shortcut
  • 1 g/mol=1 mg/mmol1\text{ g/mol} = 1\text{ mg/mmol}, so mg/Lg/mol=mmol/L\frac{\text{mg/L}}{\text{g/mol}} = \text{mmol/L}.

  • Divide mg/L\text{mg/L} directly by molar mass in g/mol\text{g/mol} to obtain mmol/L\text{mmol/L} in one single step without intermediate unit conversions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Concentration=0.00299 mol/L×1000 mmol1 mol\text{Concentration} = 0.00299\text{ mol/L} \times \frac{1000\text{ mmol}}{1\text{ mol}}

  2. Concentration=2.99 mmol/L\text{Concentration} = 2.99\text{ mmol/L}

Final answer

(a) Bicarbonate ion; (b) 2.99 mmol/L2.99\text{ mmol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit conversion factors with units cancelling, such as 1000 mmol1 mol\frac{1000\text{ mmol}}{1\text{ mol}}, to ensure you multiply rather than divide.

  • Use the equivalence 1 g/mol=1 mg/mmol1\text{ g/mol} = 1\text{ mg/mmol} as a fast and reliable check for solutions given in mg/L\text{mg/L}.

Lock it in

Similar question

01

A bottle of household baking soda contains sodium hydrogen carbonate, NaHCOX3\ce{NaHCO3}. State its common traditional name and write the formula of the anion it contains.

Answer

Common name: sodium bicarbonate. Anion formula: HCOX3X−\ce{HCO3-}. The prefix "bi-" corresponds to the presence of one hydrogen atom in the polyatomic oxyanion.

02

A sample of mineral water contains 366 mg/L366\text{ mg/L} of magnesium hydrogen carbonate, Mg(HCOX3)X2\ce{Mg(HCO3)2} (molar mass = 146.34 g/mol146.34\text{ g/mol}). Calculate the concentration in mmol/L\text{mmol/L} to three significant figures.

Answer

2.50 mmol/L2.50\text{ mmol/L}. Since 1 g/mol=1 mg/mmol1\text{ g/mol} = 1\text{ mg/mmol}, divide the concentration by the molar mass: 366 mg/L146.34 mg/mmol≈2.5007 mmol/L≈2.50 mmol/L\frac{366\text{ mg/L}}{146.34\text{ mg/mmol}} \approx 2.5007\text{ mmol/L} \approx 2.50\text{ mmol/L}.

03

An environmental chemist titrates a water sample containing both carbonate (COX3X2−\ce{CO3^2-}) and hydrogen carbonate (HCOX3X−\ce{HCO3-}) ions. (a) Provide the alternative common name for hydrogen carbonate. (b) If the sample contains 0.150 g/L0.150\text{ g/L} of HCOX3X−\ce{HCO3-} ions (molar mass = 61.02 g/mol61.02\text{ g/mol}), determine its molarity in mmol/L\text{mmol/L}.

Answer

(a) Bicarbonate ion. (b) 2.46 mmol/L2.46\text{ mmol/L}. Converting 0.150 g/L0.150\text{ g/L} to 150 mg/L150\text{ mg/L}, then dividing by molar mass gives 150 mg/L61.02 mg/mmol≈2.458 mmol/L≈2.46 mmol/L\frac{150\text{ mg/L}}{61.02\text{ mg/mmol}} \approx 2.458\text{ mmol/L} \approx 2.46\text{ mmol/L}.

Loading workspace…