Resources

An environmental water quality technician converts a trace lead concentration of 15.5 ppm15.5\text{ ppm} (where 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L} exactly by definition for dilute aqueous solutions) into standard SI units of mol/m3\text{mol/m}^3. Given the measured lead atomic mass of 207.2 g/mol207.2\text{ g/mol} and the exact metric prefix equivalences (1 g=103 mg1\text{ g} = 10^3\text{ mg}, 1 m3=103 L1\text{ m}^3 = 10^3\text{ L}), evaluate the calculation: determine which factors are exact versus measured, and calculate the concentration in mol/m3\text{mol/m}^3 to the correct number of significant figures.

Answer and steps

Final answer

The conversion factors (103 mg/g10^3\text{ mg/g} and 103 L/m310^3\text{ L/m}^3) and the definition of ppm are exact numbers (infinite significant figures). The measured numbers are 15.5 mg/L15.5\text{ mg/L} (33 significant figures) and 207.2 g/mol207.2\text{ g/mol} (44 significant figures). The concentration is 15.5×10−3 g/L207.2 g/mol×103 L/m3=7.48×10−2 mol/m3\frac{15.5 \times 10^{-3}\text{ g/L}}{207.2\text{ g/mol}} \times 10^3\text{ L/m}^3 = 7.48 \times 10^{-2}\text{ mol/m}^3 (33 significant figures).

Steps

01

Classify Values as Exact or Measured Numbers

  • Exact Numbers: These arise from definitions or standard system equivalences and possess an infinite number of significant figures. They do not limit the precision of a calculation.

    • The definition of concentration in dilute solution: 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}
    • The metric prefix equivalence: 1 g=103 mg1\text{ g} = 10^3\text{ mg}
    • The volume equivalence: 1 m3=103 L1\text{ m}^3 = 10^3\text{ L}
  • Measured Numbers: These values come from experimental observation or analytical instruments and inherently contain uncertainty.

    • Trace lead concentration: 15.5 mg/L15.5\text{ mg/L} (3 significant figures3\text{ significant figures})
    • Atomic mass of lead (Pb\ce{Pb}): 207.2 g/mol207.2\text{ g/mol} (4 significant figures4\text{ significant figures})

02

Set Up the Unit Conversion

Convert the concentration from mg/L\text{mg/L} to mol/m3\text{mol/m}^3 using dimensional analysis:

Concentration=(15.5 mg1 L)⋅(1 g103 mg)⋅(1 mol207.2 g)⋅(103 L1 m3)\text{Concentration} = \left(\frac{15.5\text{ mg}}{1\text{ L}}\right) \cdot \left(\frac{1\text{ g}}{10^3\text{ mg}}\right) \cdot \left(\frac{1\text{ mol}}{207.2\text{ g}}\right) \cdot \left(\frac{10^3\text{ L}}{1\text{ m}^3}\right)

Notice that the factor of 10310^3 in the numerator and denominator cancel:

Concentration=15.5207.2 mol/m3≈0.074807 mol/m3\text{Concentration} = \frac{15.5}{207.2}\text{ mol/m}^3 \approx 0.074807\text{ mol/m}^3


03

Apply Significant Figure Rules

When multiplying or dividing, the final result is limited by the measured value with the fewest significant figures:

  • 15.515.5 has 33 significant figures.
  • 207.2207.2 has 44 significant figures.
  • All conversion factors are exact and do not affect the count.

Rounding the result to 33 significant figures gives:

Concentration=7.48×10−2 mol/m3\text{Concentration} = 7.48 \times 10^{-2}\text{ mol/m}^3

Common Pitfall: Do not count the zeros in defined metric equivalences like 103 mg/g10^3\text{ mg/g} or 103 L/m310^3\text{ L/m}^3 as having only 11 significant figure. Because these are defined relationships, their precision is infinite. Conversely, atomic weights from periodic tables are experimentally measured constants and must be counted for significant figures unless defined otherwise.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student incorrectly inverts the volume conversion factor between liters and cubic meters, multiplying by 10⁻³ m³/L instead of 10³ L/m³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Exact: 1 ppm=1 mg/L, 1 g=1000 mg, 1 m3=1000 L1\text{ ppm} = 1\text{ mg/L},\ 1\text{ g} = 1000\text{ mg},\ 1\text{ m}^3 = 1000\text{ L}; Measured: 15.5 ppm, 207.2 g/mol  ⟹  15.5 ppm=15.5 mg/L15.5\text{ ppm},\ 207.2\text{ g/mol} \implies 15.5\text{ ppm} = 15.5\text{ mg/L}

  2. Step 2

    C=(15.5 mg/L)×(1 g1000 mg)×(1 mol207.2 g)×(1 m31000 L)C = (15.5\text{ mg/L}) \times \left(\frac{1\text{ g}}{1000\text{ mg}}\right) \times \left(\frac{1\text{ mol}}{207.2\text{ g}}\right) \times \left(\frac{1\text{ m}^3}{1000\text{ L}}\right)

    Correct

    C=(15.5 mg1 L)×(1 g1000 mg)×(1 mol207.2 g)×(1000 L1 m3)C = \left(\frac{15.5\text{ mg}}{1\text{ L}}\right) \times \left(\frac{1\text{ g}}{1000\text{ mg}}\right) \times \left(\frac{1\text{ mol}}{207.2\text{ g}}\right) \times \left(\frac{1000\text{ L}}{1\text{ m}^3}\right)

    Because liters are already in the denominator of 15.5 mg/L15.5\text{ mg/L}, you need liters in the numerator of your conversion factor, 1000 L1 m3\frac{1000\text{ L}}{1\text{ m}^3}, so that the unit cancels out.

  3. Step 3

    C=15.5(207.2×1000000) mol/m3=7.48×10−8 mol/m3C = \frac{15.5}{(207.2 \times 1000000)}\text{ mol/m}^3 = 7.48 \times 10^{-8}\text{ mol/m}^3

    Correct

    C=15.5×10001000×207.2 mol/m3=7.48×10−2 mol/m3C = \frac{15.5 \times 1000}{1000 \times 207.2}\text{ mol/m}^3 = 7.48 \times 10^{-2}\text{ mol/m}^3

    You applied significant figures and arithmetic correctly to your written expression, but the result is off by a factor of 10610^6 due to the inverted volume conversion factor in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between exact conversion equivalences and measured analytical values.

You maintained the correct 3 significant figures based on the measured concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted conversion factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You set up the volume conversion factor as (1 m3/1000 L)(1\text{ m}^3 / 1000\text{ L}) without checking that liters must be in the numerator to cancel the liters in the denominator of mg/L\text{mg/L}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Cancellation Check
  • To cancel a unit located in the denominator of an initial value, the same unit must appear in the numerator of the conversion factor.

  • Always write compound units as explicit vertical fractions (such as mgL\frac{\text{mg}}{\text{L}}) and draw strike-through lines across numerator-denominator pairs before multiplying.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the initial concentration as 15.5 mg1 L\frac{15.5\text{ mg}}{1\text{ L}}.

  2. Multiply by 1000 L1 m3\frac{1000\text{ L}}{1\text{ m}^3} so that L\text{L} in the numerator cancels L\text{L} in the denominator.

  3. Simplify the factors: 15.5207.2×10001000 mol/m3=15.5207.2 mol/m3\frac{15.5}{207.2} \times \frac{1000}{1000}\text{ mol/m}^3 = \frac{15.5}{207.2}\text{ mol/m}^3.

Final answer

7.48×10−2 mol/m37.48 \times 10^{-2}\text{ mol/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting compound units where the target change occurs in the denominator.

  • Always cross-cancel units explicitly on paper before performing numerical multiplication.

OverviewACEpath Teacher's Diagnosis

02 A student determines significant figures based on the 4 significant figures of the atomic mass rather than identifying the limiting 3 significant figures of the measured concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1 ppm=1 mg/L, 1 g=1000 mg, 1 m3=1000 L1\text{ ppm} = 1\text{ mg/L},\ 1\text{ g} = 1000\text{ mg},\ 1\text{ m}^3 = 1000\text{ L} ⟹ Measured: 15.5 ppm, 207.2 g/mol\text{Measured: } 15.5\text{ ppm},\ 207.2\text{ g/mol}

  2. Step 2

    15.5 ppm=15.5 mg/L  ⟹  C=(15.5 mg/L)×(1 g103 mg)×(1 mol207.2 g)×(103 L1 m3)=15.5207.215.5\text{ ppm} = 15.5\text{ mg/L} \implies C = (15.5\text{ mg/L}) \times \left(\frac{1\text{ g}}{10^3\text{ mg}}\right) \times \left(\frac{1\text{ mol}}{207.2\text{ g}}\right) \times \left(\frac{10^3\text{ L}}{1\text{ m}^3}\right) = \frac{15.5}{207.2}

  3. Step 3

    C=0.07481 mol/m3C = 0.07481\text{ mol/m}^3

    Correct

    C=0.0748 mol/m3C = 0.0748\text{ mol/m}^3 (or 7.48×10−2 mol/m37.48 \times 10^{-2}\text{ mol/m}^3)

    In multiplication and division, the final answer is limited by the measured quantity with the fewest significant figures. The measured value 15.5 mg/L15.5\text{ mg/L} has 33 significant figures, while 207.2 g/mol207.2\text{ g/mol} has 44. Rounding 0.0748069...0.0748069... to 33 significant figures yields 0.0748 mol/m30.0748\text{ mol/m}^3 (7.48×10−2 mol/m37.48 \times 10^{-2}\text{ mol/m}^3), not 44 significant figures.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished exact definitions and metric equivalences from measured experimental quantities.

You set up the dimensional analysis factors properly so that all intermediate units canceled into mol/m3\text{mol/m}^3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Significant figure limitation in multiplication/division

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You matched the final decimal precision to the 4 significant figures of the molar mass (207.2 g/mol207.2\text{ g/mol}) instead of identifying the limiting factor as the initial concentration (15.5 mg/L15.5\text{ mg/L}), which only has 3 significant figures.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rule of Fewest Significant Figures
  • When multiplying or dividing measured quantities, the final result must have the same number of significant figures as the measurement with the FEWEST significant figures.

  • Before rounding, count the significant figures of every non-exact term in the expression: min⁡(3,4)=3\min(3, 4) = 3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify significant figures of measured quantities: 15.515.5 has 33 significant figures, and 207.2207.2 has 44 significant figures.

  2. Since conversion factors are exact, the calculation is limited by 33 significant figures.

  3. Evaluate 15.5207.2=0.0748069... mol/m3\frac{15.5}{207.2} = 0.0748069...\text{ mol/m}^3.

  4. Round to 33 significant figures: 0.0748 mol/m3=7.48×10−2 mol/m30.0748\text{ mol/m}^3 = 7.48 \times 10^{-2}\text{ mol/m}^3.

Final answer

7.48×10−2 mol/m37.48 \times 10^{-2}\text{ mol/m}^3 (or 0.0748 mol/m30.0748\text{ mol/m}^3)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the number of significant figures directly under each measured number before doing arithmetic.

  • Remember that the term with the fewest significant figures always dictates the rounding of the product or quotient.

OverviewACEpath Teacher's Diagnosis

03 A student multiplies by the atomic mass instead of dividing by it when converting grams to moles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    1 ppm=1 mg/L,  1 g=1000 mg,  1 m3=1000 L1\text{ ppm} = 1\text{ mg/L},\; 1\text{ g} = 1000\text{ mg},\; 1\text{ m}^3 = 1000\text{ L} and Measured: 15.5 ppm (3 sig figs),  207.2 g/mol (4 sig figs)\text{Measured: } 15.5\text{ ppm (3 sig figs)},\; 207.2\text{ g/mol (4 sig figs)}

  2. Step 2

    15.5 ppm=15.5 mg/L  ⟹  C=(15.5 mg/L)×(1 g1000 mg)×(207.2 molg)×(1000 L1 m3)15.5\text{ ppm} = 15.5\text{ mg/L} \implies C = (15.5\text{ mg/L}) \times \left(\frac{1\text{ g}}{1000\text{ mg}}\right) \times \left(\frac{207.2\text{ mol}}{\text{g}}\right) \times \left(\frac{1000\text{ L}}{1\text{ m}^3}\right)

    Correct

    C=(15.5 mg1 L)×(1 g103 mg)×(1 mol207.2 g)×(103 L1 m3)C = \left(\frac{15.5\text{ mg}}{1\text{ L}}\right) \times \left(\frac{1\text{ g}}{10^3\text{ mg}}\right) \times \left(\frac{1\text{ mol}}{207.2\text{ g}}\right) \times \left(\frac{10^3\text{ L}}{1\text{ m}^3}\right)

    The atomic mass of lead is 207.2 g/mol207.2\text{ g/mol}, which means 1 mol=207.2 g1\text{ mol} = 207.2\text{ g}. To cancel grams in the numerator and obtain moles, you must place grams in the denominator: (1 mol207.2 g)\left(\frac{1\text{ mol}}{207.2\text{ g}}\right).

  3. Step 3

    C=15.5×207.2=3210 mol/m3C = 15.5 \times 207.2 = 3210\text{ mol/m}^3

    Correct

    C=15.5207.2 mol/m3=7.48×10−2 mol/m3C = \frac{15.5}{207.2}\text{ mol/m}^3 = 7.48 \times 10^{-2}\text{ mol/m}^3

    Because the molar mass factor was inverted in the setup, you multiplied instead of dividing. Dividing 15.515.5 by 207.2207.2 yields approximately 0.074807 mol/m30.074807\text{ mol/m}^3, which rounds to 7.48×10−2 mol/m37.48 \times 10^{-2}\text{ mol/m}^3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished exact defined equivalences from measured quantities.

You correctly identified that the 3 significant figures from 15.5 ppm15.5\text{ ppm} govern the final rounding.

You properly converted metric units between milligrams, grams, liters, and cubic meters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Conversion Factor

You wrote 207.2 molg\frac{207.2\text{ mol}}{\text{g}} instead of 1 mol207.2 g\frac{1\text{ mol}}{207.2\text{ g}}, inverting the relationship defined by molar mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating molar mass units (grams per mole) with moles per gram, causing you to multiply by molar mass instead of dividing to convert grams to moles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Cancellation Check
  • Conversion factors must place the unit you wish to eliminate opposite to its current position (numerator vs. denominator).

  • Before calculating, draw strike-through lines across identical numerator and denominator units to ensure only your target unit remains.

Molar Mass Definition
  • Molar mass represents the mass of one mole: M=mass (g)1 molM = \frac{\text{mass (g)}}{1\text{ mol}}.

  • Always write molar mass conversion factors as either M g1 mol\frac{M\text{ g}}{1\text{ mol}} or 1 molM g\frac{1\text{ mol}}{M\text{ g}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the molar mass conversion factor with g\text{g} in the denominator: 1 mol207.2 g\frac{1\text{ mol}}{207.2\text{ g}}.

  2. Cancel out units: (15.5 mgL)×(1 g1000 mg)×(1 mol207.2 g)×(1000 L1 m3)=15.5207.2 mol/m3\left(\frac{15.5\text{ mg}}{\text{L}}\right) \times \left(\frac{1\text{ g}}{1000\text{ mg}}\right) \times \left(\frac{1\text{ mol}}{207.2\text{ g}}\right) \times \left(\frac{1000\text{ L}}{1\text{ m}^3}\right) = \frac{15.5}{207.2}\text{ mol/m}^3.

  3. Evaluate the quotient: 15.5207.2≈0.074807 mol/m3\frac{15.5}{207.2} \approx 0.074807\text{ mol/m}^3.

  4. Round to 3 significant figures: 7.48×10−2 mol/m37.48 \times 10^{-2}\text{ mol/m}^3.

Final answer

7.48×10−2 mol/m37.48 \times 10^{-2}\text{ mol/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review unit cancellation whenever setting up molar conversions to ensure desired units remain.

  • Practice setting up conversion factors by writing the standard form 1 molatomic mass in g\frac{1\text{ mol}}{\text{atomic mass in g}} when converting from mass to moles.

Lock it in

Similar question

01

A water sample contains sulfate at a concentration of 48.0 ppm48.0\text{ ppm} (1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L} exactly). Convert this concentration to g/m3\text{g/m}^3.

Answer

48.0 g/m348.0\text{ g/m}^3. Steps: (48.0 mg/L)×(1 g/1000 mg)×(1000 L/1 m3)=48.0 g/m3(48.0\text{ mg/L}) \times (1\text{ g} / 1000\text{ mg}) \times (1000\text{ L} / 1\text{ m}^3) = 48.0\text{ g/m}^3. The metric factors 10001000 cancel out, and the answer retains 3 significant figures.

02

An air pollutant has a concentration of 2.50×10−4 mol/m32.50 \times 10^{-4}\text{ mol/m}^3. Convert this to mol/L\text{mol/L}, expressing the answer to the correct number of significant figures.

Answer

2.50×10−7 mol/L2.50 \times 10^{-7}\text{ mol/L}. Steps: (2.50×10−4 mol/m3)×(1 m3/1000 L)=2.50×10−7 mol/L(2.50 \times 10^{-4}\text{ mol/m}^3) \times (1\text{ m}^3 / 1000\text{ L}) = 2.50 \times 10^{-7}\text{ mol/L}. Since m3\text{m}^3 is in the denominator, the factor has m3\text{m}^3 in the numerator and 1000 L1000\text{ L} in the denominator.

03

A wastewater stream contains copper ions at 3.18 mg/L3.18\text{ mg/L}. Given the molar mass of copper is 63.55 g/mol63.55\text{ g/mol}, calculate the molar concentration in mol/m3\text{mol/m}^3 to the correct number of significant figures.

Answer

5.00×10−2 mol/m35.00 \times 10^{-2}\text{ mol/m}^3. Steps: (3.18 mg/L)×(1 g/1000 mg)×(1 mol/63.55 g)×(1000 L/1 m3)=3.18/63.55 mol/m3=0.050039 mol/m3(3.18\text{ mg/L}) \times (1\text{ g} / 1000\text{ mg}) \times (1\text{ mol} / 63.55\text{ g}) \times (1000\text{ L} / 1\text{ m}^3) = 3.18 / 63.55\text{ mol/m}^3 = 0.050039\text{ mol/m}^3, rounded to 3 significant figures (dictated by 3.18 mg/L3.18\text{ mg/L}).

Loading workspace…