Resources

An analytical chemist isolates 1.434 g1.434\text{ g} of pure dried silver chloride precipitate, AgCl(s)\text{AgCl}(s) (molar mass =143.32 g/mol= 143.32\text{ g/mol}), from the reaction between 40.0 mL40.0\text{ mL} of an unknown aqueous calcium chloride solution, CaCl2(aq)\text{CaCl}_2(aq), and excess silver nitrate, AgNO3(aq)\text{AgNO}_3(aq). Write the balanced net ionic equation for the precipitation, and calculate the original molar concentration of the CaCl2(aq)\text{CaCl}_2(aq) solution.

Answer and steps

Final answer

Net ionic equation: Ag+(aq)+Cl−(aq)→AgCl(s)\text{Ag}^+(aq) + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s); Original concentration: [CaCl2]=0.125 M[\text{CaCl}_2] = 0.125\text{ M}

Steps

01

Write the Balanced Net Ionic Equation

  1. Write the overall molecular equation: Aqueous calcium chloride reacts with aqueous silver nitrate to form a precipitate of silver chloride and soluble calcium nitrate: CaClX2(aq)+2AgNOX3(aq)→2AgCl(s)+Ca(NOX3)X2(aq)\ce{CaCl2}(aq) + 2\ce{AgNO3}(aq) \rightarrow 2\ce{AgCl}(s) + \ce{Ca(NO3)2}(aq)
  2. Write the complete ionic equation: Dissociate all strong, soluble electrolytes into their constituent ions: CaX2+(aq)+2ClX−(aq)+2AgX+(aq)+2NOX3X−(aq)→2AgCl(s)+CaX2+(aq)+2NOX3X−(aq)\ce{Ca^{2+}}(aq) + 2\ce{Cl-}(aq) + 2\ce{Ag+}(aq) + 2\ce{NO3-}(aq) \rightarrow 2\ce{AgCl}(s) + \ce{Ca^{2+}}(aq) + 2\ce{NO3-}(aq)
  3. Identify and cancel spectator ions: The ions that remain unchanged on both sides are CaX2+(aq)\ce{Ca^{2+}}(aq) and NOX3X−(aq)\ce{NO3-}(aq). Removing them leaves: 2AgX+(aq)+2ClX−(aq)→2AgCl(s)2\ce{Ag+}(aq) + 2\ce{Cl-}(aq) \rightarrow 2\ce{AgCl}(s)
  4. Simplify coefficients to the lowest whole-number ratio: AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+}(aq) + \ce{Cl-}(aq) \rightarrow \ce{AgCl}(s)

02

Determine the Moles of AgCl\ce{AgCl} Formed

Use the mass and molar mass of silver chloride: Moles of AgCl=massmolar mass=1.434 g143.32 g/mol=0.01000 mol\text{Moles of } \ce{AgCl} = \frac{\text{mass}}{\text{molar mass}} = \frac{1.434\text{ g}}{143.32\text{ g/mol}} = 0.01000\text{ mol}


03

Relate Moles of AgCl\ce{AgCl} to Moles of CaClX2\ce{CaCl2}

From the net ionic equation, each mole of AgCl\ce{AgCl} requires 1 mol1\text{ mol} of chloride ions: n(ClX−)=n(AgCl)=0.01000 moln(\ce{Cl-}) = n(\ce{AgCl}) = 0.01000\text{ mol}

Each formula unit of calcium chloride, CaClX2\ce{CaCl2}, releases two chloride ions upon dissolving: CaClX2(aq)→CaX2+(aq)+2ClX−(aq)\ce{CaCl2}(aq) \rightarrow \ce{Ca^{2+}}(aq) + 2\ce{Cl-}(aq)

Therefore, the moles of CaClX2\ce{CaCl2} consumed are: n(CaClX2)=12⋅n(ClX−)=0.01000 mol2=0.00500 moln(\ce{CaCl2}) = \frac{1}{2} \cdot n(\ce{Cl-}) = \frac{0.01000\text{ mol}}{2} = 0.00500\text{ mol}

Common Pitfall: Forgetting the 1:21 : 2 stoichiometric ratio between CaClX2\ce{CaCl2} and ClX−\ce{Cl-}. Assuming a 1:11 : 1 ratio would incorrectly double the resulting concentration.


04

Calculate the Molar Concentration of CaClX2\ce{CaCl2}

Convert the given volume of the solution to liters: V=40.0 mL=0.0400 LV = 40.0\text{ mL} = 0.0400\text{ L}

Calculate the original molarity: [CaClX2]=n(CaClX2)V=0.00500 mol0.0400 L=0.125 M[\ce{CaCl2}] = \frac{n(\ce{CaCl2})}{V} = \frac{0.00500\text{ mol}}{0.0400\text{ L}} = 0.125\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that each mole of CaCl₂ yields two moles of Cl⁻ ions, assuming a 1:1 mole ratio between CaCl₂ and AgCl.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+}(aq) + \ce{Cl-}(aq) \rightarrow \ce{AgCl}(s)

  2. Step 2

    n(AgCl)=1.434 g143.32 g/mol=0.0100 moln(\ce{AgCl}) = \frac{1.434\text{ g}}{143.32\text{ g/mol}} = 0.0100\text{ mol}

  3. Step 3

    n(CaClX2)=n(AgCl)=0.0100 moln(\ce{CaCl2}) = n(\ce{AgCl}) = 0.0100\text{ mol}

    Correct

    n(CaClX2)=12n(ClX−)=12n(AgCl)=0.00500 moln(\ce{CaCl2}) = \frac{1}{2} n(\ce{Cl-}) = \frac{1}{2} n(\ce{AgCl}) = 0.00500\text{ mol}

    Each formula unit of CaClX2\ce{CaCl2} dissociates to produce two ClX−\ce{Cl-} ions: CaClX2(aq)→CaX2+(aq)+2ClX−(aq)\ce{CaCl2}(aq) \rightarrow \ce{Ca^{2+}}(aq) + 2\ce{Cl-}(aq). Therefore, 1 mol1\text{ mol} of CaClX2\ce{CaCl2} yields 2 mol2\text{ mol} of AgCl\ce{AgCl}, meaning n(CaClX2)=0.0100 mol2=0.00500 moln(\ce{CaCl2}) = \frac{0.0100\text{ mol}}{2} = 0.00500\text{ mol}.

  4. Step 4

    V=40.0 mL=0.0400 L  ⟹  M=0.0100 mol0.0400 L=0.250 MV = 40.0\text{ mL} = 0.0400\text{ L} \implies M = \frac{0.0100\text{ mol}}{0.0400\text{ L}} = 0.250\text{ M}

    Correct

    V=0.0400 L  ⟹  [CaClX2]=0.00500 mol0.0400 L=0.125 MV = 0.0400\text{ L} \implies [\ce{CaCl2}] = \frac{0.00500\text{ mol}}{0.0400\text{ L}} = 0.125\text{ M}

    Your concentration formula and unit conversion were executed properly, but the result is doubled because it used the incorrect mole value from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct balanced net ionic equation for silver chloride precipitation.

You correctly calculated the moles of AgCl\ce{AgCl} from the given mass.

You converted the solution volume from milliliters to liters accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Subscript Stoichiometry Oversight

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated the moles of the ionic compound CaClX2\ce{CaCl2} directly to the moles of the precipitate AgCl\ce{AgCl}, overlooking the chemical formula subscript that dictates two chloride ions per calcium chloride formula unit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Subscript to Ion Mole Ratio
  • For a salt AXx BXy\ce{A_x B_y}, the moles of ion B\ce{B} produced are y×n(AXx BXy)y \times n(\ce{A_x B_y}).

  • Write the dissociation equation CaClX2→CaX2++2ClX−\ce{CaCl2} \rightarrow \ce{Ca^{2+}} + 2\ce{Cl-} before converting between the moles of salt and the moles of precipitate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate precipitate moles to the original salt: each mole of CaClX2\ce{CaCl2} contains 2 mol2\text{ mol} of ClX−\ce{Cl-}, so n(CaClX2)=n(ClX−)2=0.0100 mol2=0.00500 moln(\ce{CaCl2}) = \frac{n(\ce{Cl-})}{2} = \frac{0.0100\text{ mol}}{2} = 0.00500\text{ mol}.

  2. Divide by the solution volume in liters: [CaClX2]=0.00500 mol0.0400 L=0.125 M[\ce{CaCl2}] = \frac{0.00500\text{ mol}}{0.0400\text{ L}} = 0.125\text{ M}.

Final answer

Net ionic equation: AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+}(aq) + \ce{Cl-}(aq) \rightarrow \ce{AgCl}(s); Original concentration: [CaClX2]=0.125 M[\ce{CaCl2}] = 0.125\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the dissociation equation of the dissolved salt to verify how many moles of the precipitating ion are released per mole of salt.

  • Check that your mole conversion includes the stoichiometric factor from the subscript before computing molarity.

OverviewACEpath Teacher's Diagnosis

02 The student writes a full molecular or ionic equation with spectator ions included rather than eliminating spectators for the net ionic equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    CaX2+(aq)+2 ClX−(aq)+2 AgX+(aq)+2 NOX3X−(aq)→2 AgCl(s)+CaX2+(aq)+2 NOX3X−(aq)\ce{Ca^{2+}(aq) + 2Cl-(aq) + 2Ag+(aq) + 2NO3-(aq) -> 2AgCl(s) + Ca^{2+}(aq) + 2NO3-(aq)}

    Correct

    AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}

    You wrote the complete ionic equation rather than the net ionic equation. To obtain the net ionic equation, you need to cancel the spectator ions (CaX2+\ce{Ca^{2+}} and NOX3X−\ce{NO3-}) that appear unchanged on both sides and reduce the remaining coefficients to the lowest whole-number ratio.

  2. Step 2

    n(AgCl)=1.434 g143.32 g/mol=0.0100 moln(\ce{AgCl}) = \frac{1.434\text{ g}}{143.32\text{ g/mol}} = 0.0100\text{ mol}

  3. Step 3

    n(CaClX2)=0.0100 mol2=0.00500 moln(\ce{CaCl2}) = \frac{0.0100\text{ mol}}{2} = 0.00500\text{ mol}

  4. Step 4

    M=0.00500 mol0.0400 L=0.125 MM = \frac{0.00500\text{ mol}}{0.0400\text{ L}} = 0.125\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of precipitate formed from its mass and molar mass.

You correctly used the 1:21:2 mole ratio between calcium chloride and chloride ions.

You correctly converted the solution volume to liters and determined the initial concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Spectator ions retained in net ionic equation

You stopped at the complete ionic equation without crossing out the spectator ions.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a complete ionic equation with a net ionic equation by omitting the final step of canceling spectator ions and simplifying coefficients to their lowest whole-number ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Differentiating Complete vs. Net Ionic Equations
  • A complete ionic equation shows all soluble strong electrolytes dissociated into ions; a net ionic equation excludes spectator ions that do not undergo chemical change.

  • Always identify ions identical in phase and charge on both sides of the arrow, cross them out, and divide remaining coefficients by their greatest common divisor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify and cancel the spectator ions CaX2+(aq)\ce{Ca^{2+}(aq)} and 2 NOX3X−(aq)\ce{2NO3-(aq)} from both sides of your complete ionic equation: 2AgX+(aq)+2ClX−(aq)→2AgCl(s)2\ce{Ag+(aq)} + 2\ce{Cl-(aq)} \rightarrow 2\ce{AgCl(s)}.

  2. Simplify the coefficients to the lowest whole-number ratio by dividing by 22: AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq)} + \ce{Cl-(aq)} \rightarrow \ce{AgCl(s)}.

Final answer

Net ionic equation: AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}; [CaClX2]=0.125 M[\ce{CaCl2}] = 0.125\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between molecular, complete ionic, and net ionic equations.

  • Practice identifying spectator ions immediately from solubility rules before writing precipitation equations.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert the volume from milliliters to liters when calculating molarity, resulting in a concentration that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ag+(aq)+Cl−(aq)→AgCl(s)\text{Ag}^+(aq) + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s)

  2. Step 2

    n(AgCl)=1.434143.32=0.0100 moln(\text{AgCl}) = \frac{1.434}{143.32} = 0.0100\text{ mol}

  3. Step 3

    n(CaCl2)=0.0100 mol2=0.00500 moln(\text{CaCl}_2) = \frac{0.0100\text{ mol}}{2} = 0.00500\text{ mol}

  4. Step 4

    M=0.00500 mol40.0 mL=0.000125 MM = \frac{0.00500\text{ mol}}{40.0\text{ mL}} = 0.000125\text{ M}

    Correct

    [CaCl2]=0.00500 mol0.0400 L=0.125 M[\text{CaCl}_2] = \frac{0.00500\text{ mol}}{0.0400\text{ L}} = 0.125\text{ M}

    Molarity is defined as moles of solute per liter of solution (mol/L\text{mol/L}), not per milliliter. Dividing by 40.0 mL40.0\text{ mL} directly caused your final concentration to be too small by a factor of 10001000.

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the balanced net ionic precipitation equation correctly.

You accurately converted the mass of precipitate into moles.

You correctly accounted for the two chloride ions per formula unit of calcium chloride.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Volume Unit Conversion Omission in Molarity

You divided moles directly by milliliters (40.0 mL40.0\text{ mL}) instead of converting the volume to liters (0.0400 L0.0400\text{ L}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the dimensional units of molarity (1 M=1 mol/L1\text{ M} = 1\text{ mol/L}) when substituting volume into the molarity formula.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Alignment for Molarity
  • Molarity (M)=moles of solute (mol)volume of solution (L)\text{Molarity } (M) = \frac{\text{moles of solute } (\text{mol})}{\text{volume of solution } (\text{L})}

  • Always convert any volume given in mL\text{mL} to L\text{L} by dividing by 10001000 before calculating molar concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the solution volume to liters: V=40.0 mL×1 L1000 mL=0.0400 LV = 40.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.0400\text{ L}.

  2. Calculate the molar concentration: [CaCl2]=nV=0.00500 mol0.0400 L=0.125 M[\text{CaCl}_2] = \frac{n}{V} = \frac{0.00500\text{ mol}}{0.0400\text{ L}} = 0.125\text{ M}.

Final answer

Net ionic equation: Ag+(aq)+Cl−(aq)→AgCl(s)\text{Ag}^+(aq) + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s); Original concentration: [CaCl2]=0.125 M[\text{CaCl}_2] = 0.125\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit units during each calculation step so unit mismatches like mol/mL\text{mol/mL} stand out immediately.

  • Double-check that any volume in mL\text{mL} is divided by 10001000 whenever you calculate molarity.

Lock it in

Similar question

01

A 25.0 mL25.0\text{ mL} sample of an aqueous magnesium chloride solution, MgClX2(aq)\ce{MgCl2}(aq), reacts with excess silver nitrate to produce 0.574 g0.574\text{ g} of AgCl(s)\ce{AgCl}(s) (molar mass =143.32 g/mol= 143.32\text{ g/mol}). Calculate the molar concentration of the original MgClX2\ce{MgCl2} solution.

Answer

[MgClX2]=0.0801 M[\ce{MgCl2}] = 0.0801\text{ M}. Key steps: n(AgCl)=0.574 g143.32 g/mol≈0.004005 moln(\ce{AgCl}) = \frac{0.574\text{ g}}{143.32\text{ g/mol}} \approx 0.004005\text{ mol}; n(MgClX2)=n(AgCl)2=0.0020025 moln(\ce{MgCl2}) = \frac{n(\ce{AgCl})}{2} = 0.0020025\text{ mol}; M=0.0020025 mol0.0250 L≈0.0801 MM = \frac{0.0020025\text{ mol}}{0.0250\text{ L}} \approx 0.0801\text{ M}.

02

Excess barium nitrate, Ba(NOX3)X2(aq)\ce{Ba(NO3)2}(aq), is added to 50.0 mL50.0\text{ mL} of an unknown sodium phosphate solution, NaX3POX4(aq)\ce{Na3PO4}(aq), precipitating 1.805 g1.805\text{ g} of barium phosphate, BaX3(POX4)X2(s)\ce{Ba3(PO4)2}(s) (molar mass =601.93 g/mol= 601.93\text{ g/mol}). Find the molarity of the original NaX3POX4(aq)\ce{Na3PO4}(aq) solution.

Answer

[NaX3POX4]=0.120 M[\ce{Na3PO4}] = 0.120\text{ M}. Key steps: n(BaX3(POX4)X2)=1.805 g601.93 g/mol≈0.002999 moln(\ce{Ba3(PO4)2}) = \frac{1.805\text{ g}}{601.93\text{ g/mol}} \approx 0.002999\text{ mol}; each mole of BaX3(POX4)X2\ce{Ba3(PO4)2} contains 2 mol2\text{ mol} of POX4X3−\ce{PO4^{3-}}, so n(NaX3POX4)=2×0.002999 mol=0.00600 moln(\ce{Na3PO4}) = 2 \times 0.002999\text{ mol} = 0.00600\text{ mol}; [NaX3POX4]=0.00600 mol0.0500 L=0.120 M[\ce{Na3PO4}] = \frac{0.00600\text{ mol}}{0.0500\text{ L}} = 0.120\text{ M}.

03

A 100.0 mL100.0\text{ mL} solution contains a mixture of NaCl\ce{NaCl} and CaClX2\ce{CaCl2}. Addition of excess AgNOX3\ce{AgNO3} yields 5.733 g5.733\text{ g} of AgCl(s)\ce{AgCl}(s) (143.32 g/mol143.32\text{ g/mol}). In a separate test on an identical 100.0 mL100.0\text{ mL} sample, all calcium is precipitated as calcium oxalate, CaCX2OX4(s)\ce{CaC2O4}(s) (128.10 g/mol128.10\text{ g/mol}), yielding 1.281 g1.281\text{ g}. Determine the molar concentrations of both CaClX2\ce{CaCl2} and NaCl\ce{NaCl} in the original mixture.

Answer

[CaClX2]=0.100 M[\ce{CaCl2}] = 0.100\text{ M}, [NaCl]=0.200 M[\ce{NaCl}] = 0.200\text{ M}. Key steps: n(CaX2+)=1.281 g128.10 g/mol=0.0100 mol  ⟹  [CaClX2]=0.0100 mol0.1000 L=0.100 Mn(\ce{Ca^{2+}}) = \frac{1.281\text{ g}}{128.10\text{ g/mol}} = 0.0100\text{ mol} \implies [\ce{CaCl2}] = \frac{0.0100\text{ mol}}{0.1000\text{ L}} = 0.100\text{ M}; chloride from CaClX2=2×0.0100=0.0200 mol\ce{CaCl2} = 2 \times 0.0100 = 0.0200\text{ mol}; total chloride n(AgCl)=5.733 g143.32 g/mol=0.0400 moln(\ce{AgCl}) = \frac{5.733\text{ g}}{143.32\text{ g/mol}} = 0.0400\text{ mol}; chloride from NaCl=0.0400−0.0200=0.0200 mol  ⟹  [NaCl]=0.0200 mol0.1000 L=0.200 M\ce{NaCl} = 0.0400 - 0.0200 = 0.0200\text{ mol} \implies [\ce{NaCl}] = \frac{0.0200\text{ mol}}{0.1000\text{ L}} = 0.200\text{ M}.

Loading workspace…