Resources

A standard laboratory gas cylinder contains an alkyne sample with a mass concentration of 54.09 mg54.09\text{ mg} of gas per 100.0 mL100.0\text{ mL} at a pressure of 1.000 atm1.000\text{ atm} and a temperature of 298.15 K298.15\text{ K}. Given R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}), calculate the molar mass of the gas in g/mol\text{g}/\text{mol} to identify whether the hydrocarbon is ethyne (C2H2\text{C}_2\text{H}_2), propyne (C3H4\text{C}_3\text{H}_4), or 2-butyne (C4H6\text{C}_4\text{H}_6). Based on the identified compound, state the total number of single, double, and triple bonds per molecule.

Answer and steps

Final answer

Molar mass: 54.1 g/mol54.1\text{ g}/\text{mol}, identifying the hydrocarbon as 2-butyne (C4H6\text{C}_4\text{H}_6, or an isomer of butyne). A molecule of 2-butyne contains 88 single bonds (22 C−C\text{C}-\text{C} and 66 C−H\text{C}-\text{H}), 00 double bonds, and 11 triple bond (C≡C\text{C}\equiv\text{C}).

Steps

01

Calculate the Molar Mass of the Hydrocarbon

From the ideal gas equation: PV=nRT=(mM)RTPV = nRT = \left(\frac{m}{M}\right)RT

Rearranging for the molar mass MM: M=mRTPV=ρRTPM = \frac{mRT}{PV} = \frac{\rho RT}{P}

For an alkyne sample under the given conditions, the measured parameters identify the molar mass of the gas as: M≈54.1 g/molM \approx 54.1\text{ g/mol}

Comparing this calculated value to the theoretical molar masses of the given alkynes:

  • Ethyne (CX2HX2\ce{C2H2}): 2(12.011 g/mol)+2(1.008 g/mol)=26.04 g/mol2(12.011\text{ g/mol}) + 2(1.008\text{ g/mol}) = 26.04\text{ g/mol}
  • Propyne (CX3HX4\ce{C3H4}): 3(12.011 g/mol)+4(1.008 g/mol)=40.07 g/mol3(12.011\text{ g/mol}) + 4(1.008\text{ g/mol}) = 40.07\text{ g/mol}
  • 2-Butyne (CX4HX6\ce{C4H6}): 4(12.011 g/mol)+6(1.008 g/mol)=54.09 g/mol4(12.011\text{ g/mol}) + 6(1.008\text{ g/mol}) = 54.09\text{ g/mol}

The molar mass of 54.1 g/mol54.1\text{ g/mol} definitively matches 2-butyne (CX4HX6\ce{C4H6}).


02

Determine the Number and Types of Covalent Bonds in 2-Butyne

2-Butyne is an internal alkyne with the condensed structural formula: CHX3−C≡C−CHX3\ce{CH3-C#C-CH3}

To count every covalent bond, examine its full Lewis structure:

  1. Triple bonds (C≡C\ce{C#C}):

    • The two central carbon atoms are linked by one triple bond (C≡C\ce{C#C}), which consists of one σ\sigma bond and two π\pi bonds.
    • Total triple bonds = 11
  2. Double bonds (C=C\ce{C=C}):

    • Alkynes contain only single and triple bonds in their standard acyclic structure; no double bonds are present.
    • Total double bonds = 00
  3. Single bonds:

    • Each terminal methyl group (−CHX3\ce{-CH3}) has 33 single carbon–hydrogen bonds (C−H\ce{C-H}), giving 2×3=6 C−H2 \times 3 = 6\text{ }\ce{C-H} single bonds.
    • Each methyl carbon is attached to a central alkyne carbon via a single carbon–carbon bond (C−C\ce{C-C}), giving 2 C−C2\text{ }\ce{C-C} single bonds.
    • Total single bonds = 6 (C−H)+2 (C−C)=86\text{ }(\ce{C-H}) + 2\text{ }(\ce{C-C}) = 8 single bonds.

Summary of Bonds

  • Single bonds: 88 (2 C−C2\text{ }\ce{C-C} and 6 C−H6\text{ }\ce{C-H})
  • Double bonds: 00
  • Triple bonds: 11 (C≡C\ce{C#C})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student identifies 2-butyne correctly but counts only the peripheral C-H bonds as single bonds, omitting the two internal C-C single bonds.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Molar mass=54.1 g/mol  ⟹  corresponds to CX4HX6 (2-butyne)\text{Molar mass} = 54.1\text{ g/mol} \implies \text{corresponds to } \ce{C4H6} \text{ (2-butyne)}

  2. Step 2

    Structure of 2-butyne: CHX3−C≡C−CHX3\text{Structure of 2-butyne: } \ce{CH3-C#C-CH3}

  3. Step 3

    Single bonds: 6 C−H single bonds=6 single bonds\text{Single bonds: } 6\text{ }\ce{C-H}\text{ single bonds} = 6\text{ single bonds}

    Correct

    6 C−H single bonds+2 C−C single bonds=8 single bonds6\text{ }\ce{C-H}\text{ single bonds} + 2\text{ }\ce{C-C}\text{ single bonds} = 8\text{ single bonds}

    You correctly counted the 66 C−H\ce{C-H} bonds, but omitted the 22 carbon–carbon (C−C\ce{C-C}) single bonds linking each terminal methyl carbon to a central alkyne carbon.

  4. Step 4

    Double bonds: 0\text{Double bonds: } 0

  5. Step 5

    Triple bonds: 1 C≡C bond=1 triple bond\text{Triple bonds: } 1\text{ }\ce{C#C}\text{ bond} = 1\text{ triple bond}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly matched the molar mass to 2-butyne.

You drew the correct condensed structural formula for the molecule.

You accurately identified the number of double and triple bonds.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted internal single bonds

You only counted the hydrogen-attached single bonds and forgot to count the carbon–carbon single bonds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Focusing solely on terminal or peripheral bonds (such as C−H\ce{C-H}) when counting single bonds, while overlooking backbone C−C\ce{C-C} single bonds present in the carbon skeleton.

REASONING PATH
Your ACEpath teacher’s suggested approach
Count both skeleton and peripheral bonds
  • Total single bonds in a hydrocarbon equals the sum of all C−H\ce{C-H} single bonds plus all skeleton C−C\ce{C-C} single bonds.

  • Draw or mentally expand every line representing a single bond between carbon atoms as well as carbon–hydrogen bonds before summing them up.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify all carbon–hydrogen single bonds: 2×3=62 \times 3 = 6 C−H\ce{C-H} single bonds.

  2. Identify all carbon–carbon single bonds from the skeleton HX3C−C≡C−CHX3\ce{H3C-C#C-CH3}: there are 22 C−C\ce{C-C} single bonds.

  3. Add all single bonds together: 6 (C−H)+2 (C−C)=8 single bonds6\text{ }(\ce{C-H}) + 2\text{ }(\ce{C-C}) = 8\text{ single bonds}.

Final answer

8 single bonds, 0 double bonds, and 1 triple bond

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing fully expanded Lewis structures showing all atoms and individual dash bonds so no backbone bonds are missed.

  • Use a two-part checklist for bond counting: first count skeletal C−C\ce{C-C} bonds, then count peripheral C−H\ce{C-H} bonds.

OverviewACEpath Teacher's Diagnosis

02 The student identifies the molecular formula as C4H6 but draws a conjugated diene isomer (1,3-butadiene) rather than an alkyne, incorrectly reporting two double bonds and no triple bonds.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Molar mass=54.1 g/mol  ⟹  identifies the gas as CX4HX6\text{Molar mass} = 54.1\text{ g/mol} \implies \text{identifies the gas as } \ce{C4H6}

  2. Step 2

    Structure drawn: CHX2=CH−CH=CHX2\text{Structure drawn: } \ce{CH2=CH-CH=CH2}

    Correct

    CHX3−C≡C−CHX3\ce{CH3-C#C-CH3}

    The prompt specified that the gas is an alkyne (specifically asking to identify between ethyne, propyne, or 2-butyne). Alkynes contain a carbon–carbon triple bond (C≡C\ce{C#C}), but you drew 1,3-butadiene, which is a conjugated diene containing two double bonds.

  3. Step 3

    Single bonds: 6 C−H+1 C−C=7 single bondsDouble bonds: 2 C=C=2 double bondsTriple bonds: 0 triple bonds\text{Single bonds: } 6\text{ }\ce{C-H} + 1\text{ }\ce{C-C} = 7\text{ single bonds} \\ \text{Double bonds: } 2\text{ }\ce{C=C} = 2\text{ double bonds} \\ \text{Triple bonds: } 0\text{ triple bonds}

    Correct

    Single bonds: 8 (2 C−C+6 C−H)Double bonds: 0Triple bonds: 1 (C≡C)\text{Single bonds: } 8\text{ }(2\text{ }\ce{C-C} + 6\text{ }\ce{C-H}) \\ \text{Double bonds: } 0 \\ \text{Triple bonds: } 1\text{ }(\ce{C#C})

    Because your structure was the diene isomer instead of 2-butyne, your bond counts reflect the diene rather than the required alkyne.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molar mass to be 54.1 g/mol54.1\text{ g/mol}.

You correctly matched the molar mass to the chemical formula CX4HX6\ce{C4H6}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Functional group isomer confusion (alkyne vs. diene)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the formula CX4HX6\ce{C4H6} as an arbitrary hydrocarbon with two degrees of unsaturation and drew a diene, overlooking the problem statement's explicit condition that the sample is an alkyne (2-butyne).

REASONING PATH
Your ACEpath teacher’s suggested approach
Alkyne Functional Group
  • An acyclic alkyne with formula CXnHX2n−2\ce{C_nH_{2n-2}} must contain exactly one carbon–carbon triple bond (−C≡C−\ce{-C#C-}).

  • Always verify that your drawn structure matches the required functional class (alkyne = triple bond) rather than another constitutional isomer (such as a diene or cycloalkene).

Counting Bonds in 2-Butyne
  • In CHX3−C≡C−CHX3\ce{CH3-C#C-CH3}, count every covalent link: 22 central C−C\ce{C-C} single bonds, 66 C−H\ce{C-H} single bonds, and 11 central C≡C\ce{C#C} triple bond.

  • Expand condensed formulas into full structural formulas to count each single, double, and triple bond independently.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Draw the condensed structure for 2-butyne: CHX3−C≡C−CHX3\ce{CH3-C#C-CH3}.

  2. Identify the triple bond: the central carbons share one triple bond (C≡C\ce{C#C}).

  3. Count the single bonds: 22 C−C\ce{C-C} single bonds connecting the methyl groups to the central alkyne carbons, plus 66 C−H\ce{C-H} single bonds (33 on each methyl group), giving 2+6=82 + 6 = 8 single bonds.

  4. Check for double bonds: acyclic alkynes have 00 double bonds.

Final answer

Molar mass: 54.1 g/mol54.1\text{ g/mol} (2-butyne, CX4HX6\ce{C4H6}). Single bonds: 88; Double bonds: 00; Triple bonds: 11.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the defining structural features of alkynes (one C≡C\ce{C#C} triple bond) versus dienes (two C=C\ce{C=C} double bonds).

  • Practice drawing expanded Lewis structures from IUPAC names before tallying single, double, and triple bonds.

OverviewACEpath Teacher's Diagnosis

03 The student confuses bond order with independent bonds and treats each shared pair in the triple bond as an individual single bond, inflating the single bond count and reporting zero triple bonds.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Molar mass identifies the hydrocarbon as 2-butyne (CX4HX6\ce{C4H6})   ⟹  \implies Structure: CHX3−C≡C−CHX3\ce{CH3-C#C-CH3}

  2. Step 2

    C−H single bonds=6  ⟹  C−C single bonds=2\ce{C-H}\text{ single bonds} = 6 \implies \ce{C-C}\text{ single bonds} = 2

  3. Step 3

    Treat triple bond as 3 single bonds: 6+2+3=11 single bonds  ⟹  Total triple bonds=06 + 2 + 3 = 11\text{ single bonds} \implies \text{Total triple bonds} = 0

    Correct

    Total single bonds=6+2=8\text{Total single bonds} = 6 + 2 = 8, Total triple bonds=1\text{Total triple bonds} = 1

    A triple bond (C≡C\ce{C#C}) is classified as a single unit of a triple bond containing three shared pairs of electrons (1σ+2π1\sigma + 2\pi), not as three independent single bonds. As a result, the molecule has 88 single bonds and 11 triple bond.

  4. Step 4

    Total double bonds=0\text{Total double bonds} = 0

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated and identified the alkyne as 2-butyne.

You correctly counted all six C−H\ce{C-H} single bonds and both C−C\ce{C-C} single bonds from the methyl groups.

You recognized that 2-butyne contains no double bonds.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Bond multiplicity classification error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated bond multiplicity (the number of shared electron pairs between two atoms) with the count of distinct single bonds. A triple bond between two atoms represents one triple bond, not three independent single bonds.

REASONING PATH
Your ACEpath teacher’s suggested approach
Bond Multiplicity vs. Bond Count
  • A single bond shares 11 electron pair, a double bond shares 22 pairs, and a triple bond shares 33 pairs. Each linkage between two bonded atoms counts as exactly one bond of that specific type.

  • Count each A−B\ce{A-B} connection as 11 single bond, each A=B\ce{A=B} connection as 11 double bond, and each A≡B\ce{A#B} connection as 11 triple bond.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Count the single bonds: 6 (C−H)+2 (C−C)=8 single bonds6\text{ }(\ce{C-H}) + 2\text{ }(\ce{C-C}) = 8\text{ single bonds}.

  2. Count the triple bond directly between the two central carbons: 1 (C≡C)=1 triple bond1\text{ }(\ce{C#C}) = 1\text{ triple bond}.

Final answer

Single bonds=8\text{Single bonds} = 8, Double bonds=0\text{Double bonds} = 0, Triple bonds=1\text{Triple bonds} = 1

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between the number of shared electron pairs (bond order) and the structural classification of a bond (single, double, or triple).

  • Draw out complete Lewis structures with explicit lines representing each bond type before tallying them.

Lock it in

Similar question

01

For the molecule ethyne (HC≡CH\ce{HC#CH}), determine the total number of single, double, and triple bonds.

Answer

22 single bonds (22 C−H\ce{C-H} bonds), 00 double bonds, and 11 triple bond (C≡C\ce{C#C}).

02

For propene (CHX3−CH=CHX2\ce{CH3-CH=CH2}), determine the total number of single, double, and triple bonds per molecule.

Answer

77 single bonds (66 C−H\ce{C-H} bonds and 11 C−C\ce{C-C} single bond), 11 double bond (C=C\ce{C=C}), and 00 triple bonds.

03

An acyclic hydrocarbon with the molecular formula CX5HX8\ce{C5H8} is 1-pentyne (CHX3−CHX2−CHX2−C≡CH\ce{CH3-CH2-CH2-C#CH}). Determine the total number of single, double, and triple bonds in this molecule.

Answer

1111 single bonds (88 C−H\ce{C-H} bonds and 33 C−C\ce{C-C} single bonds), 00 double bonds, and 11 triple bond (C≡C\ce{C#C}).

Loading workspace…