Resources

A zinc plating bath is utilized to apply a protective zinc layer (molar mass 65.38 g/mol65.38\text{ g/mol}, density ρ=7.14 g/cm3\rho = 7.14\text{ g/cm}^3) onto a flat iron sheet with a total exposed surface area of 120 cm2120\text{ cm}^2. The bath operates at a constant current density of 45.0 mA/cm245.0\text{ mA/cm}^2. The reduction reaction is Zn2+(aq)+2e−→Zn(s)\text{Zn}^{2+}(aq) + 2e^- \rightarrow \text{Zn}(s) and proceeds with 100%100\% current efficiency. Calculate the time in minutes required to deposit a uniform zinc coating of thickness 25.0 μm25.0\,\mu\text{m} (1 μm=10−4 cm1\,\mu\text{m} = 10^{-4}\text{ cm}). Use F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-.

Answer and steps

Final answer

19.6 min19.6\text{ min}

Steps

01

Calculate the Volume and Mass of Zinc Deposited

To find the electroplating time, we determine the mass of zinc required to form the coating, use Faraday's laws of electrolysis to calculate the total charge needed, and then divide by the total operating current.

The thickness of the coating is: d=25.0 μm=25.0×10−4 cm=2.50×10−3 cmd = 25.0\,\mu\text{m} = 25.0 \times 10^{-4}\text{ cm} = 2.50 \times 10^{-3}\text{ cm}

Given an exposed surface area A=120 cm2A = 120\text{ cm}^2, the volume of the zinc layer is: V=A⋅d=120 cm2⋅2.50×10−3 cm=0.300 cm3V = A \cdot d = 120\text{ cm}^2 \cdot 2.50 \times 10^{-3}\text{ cm} = 0.300\text{ cm}^3

Using the density of zinc (ρ=7.14 g/cm3\rho = 7.14\text{ g/cm}^3), the required mass of zinc is: m=ρ⋅V=7.14 g/cm3⋅0.300 cm3=2.142 gm = \rho \cdot V = 7.14\text{ g/cm}^3 \cdot 0.300\text{ cm}^3 = 2.142\text{ g}

02

Determine the Amount of Substance (Moles) of Zn\ce{Zn}

Using the molar mass of zinc (M=65.38 g/molM = 65.38\text{ g/mol}): nZn=mM=2.142 g65.38 g/mol≈0.03276 moln_{\ce{Zn}} = \frac{m}{M} = \frac{2.142\text{ g}}{65.38\text{ g/mol}} \approx 0.03276\text{ mol}

03

Calculate the Total Electric Charge Required

From the half-reaction ZnX2+(aq)+2 eX−→Zn(s)\ce{Zn^2+ (aq) + 2e- -> Zn (s)}, each mole of Zn\ce{Zn} deposited requires z=2 moles of electronsz = 2\text{ moles of electrons}.

With 100%100\% current efficiency, the total charge QQ is given by Faraday's law: Q=nZn⋅z⋅FQ = n_{\ce{Zn}} \cdot z \cdot F Q=0.03276 mol⋅2 mol e−/mol⋅96,485 C/mol e−≈6322 CQ = 0.03276\text{ mol} \cdot 2\text{ mol }e^-/\text{mol} \cdot 96{,}485\text{ C/mol }e^- \approx 6322\text{ C}

04

Calculate the Total Current

The total current II is the product of the current density jj and the total exposed area AA: j=45.0 mA/cm2=0.0450 A/cm2j = 45.0\text{ mA/cm}^2 = 0.0450\text{ A/cm}^2 I=j⋅A=0.0450 A/cm2⋅120 cm2=5.40 AI = j \cdot A = 0.0450\text{ A/cm}^2 \cdot 120\text{ cm}^2 = 5.40\text{ A}

05

Calculate the Plating Time

Using the relationship Q=I⋅tQ = I \cdot t: t=QI=6322 C5.40 A≈1171 st = \frac{Q}{I} = \frac{6322\text{ C}}{5.40\text{ A}} \approx 1171\text{ s}

Converting seconds to minutes: t=1171 s60 s/min≈19.6 mint = \frac{1171\text{ s}}{60\text{ s/min}} \approx 19.6\text{ min}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that reducing Zn²⁺ requires 2 electrons per mole (using z = 1 instead of z = 2), halving the calculated charge and deposition time to 9.76 minutes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=120 cm2×0.0025 cm=0.300 cm3  ⟹  m=7.14 g/cm3×0.300 cm3=2.142 gV = 120\text{ cm}^2 \times 0.0025\text{ cm} = 0.300\text{ cm}^3 \implies m = 7.14\text{ g/cm}^3 \times 0.300\text{ cm}^3 = 2.142\text{ g}

  2. Step 2

    n=2.142 g65.38 g/mol=0.03276 moln = \frac{2.142\text{ g}}{65.38\text{ g/mol}} = 0.03276\text{ mol}

  3. Step 3

    I=45.0 mA/cm2×120 cm2=5,400 mA=5.40 AI = 45.0\text{ mA/cm}^2 \times 120\text{ cm}^2 = 5{,}400\text{ mA} = 5.40\text{ A}

  4. Step 4

    Q=0.03276 mol×1×96,485 C/mol=3,160.8 CQ = 0.03276\text{ mol} \times 1 \times 96{,}485\text{ C/mol} = 3{,}160.8\text{ C}

    Correct

    Q=n⋅z⋅F=0.03276 mol×2×96,485 C/mol≈6,322 CQ = n \cdot z \cdot F = 0.03276\text{ mol} \times 2 \times 96{,}485\text{ C/mol} \approx 6{,}322\text{ C}

    Reducing each ZnX2+\ce{Zn^2+} ion requires 2 electrons (ZnX2++2 eX−→Zn\ce{Zn^2+ + 2e- -> Zn}), so the stoichiometric factor zz is 22, not 11.

  5. Step 5

    t=3,160.8 C5.40 A=585.3 s  ⟹  t=585.3 s60=9.76 mint = \frac{3{,}160.8\text{ C}}{5.40\text{ A}} = 585.3\text{ s} \implies t = \frac{585.3\text{ s}}{60} = 9.76\text{ min}

    Correct

    t=QI=6,322 C5.40 A≈1,171 s  ⟹  t=1,171 s60 s/min≈19.6 mint = \frac{Q}{I} = \frac{6{,}322\text{ C}}{5.40\text{ A}} \approx 1{,}171\text{ s} \implies t = \frac{1{,}171\text{ s}}{60\text{ s/min}} \approx 19.6\text{ min}

    Your formula t=QIt = \frac{Q}{I} and unit conversion from seconds to minutes are correct, but the final value is halved because of the charge error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the volume and mass of zinc using dimensional analysis.

You accurately found the total current in amperes from the current density and surface area.

You correctly related charge, current, and time using Q=I⋅tQ = I \cdot t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect stoichiometric electron factor ($z$)

You substituted 1 mol e−/mol1\text{ mol }e^-/\text{mol} instead of 2 mol e−/mol2\text{ mol }e^-/\text{mol} when calculating QQ.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the oxidation state change in the reduction half-reaction ZnX2++2 eX−→Zn\ce{Zn^2+ + 2e- -> Zn}, using z=1z = 1 rather than the stoichiometric number of electrons transferred per mole of metal deposited.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect the Half-Reaction for $z$
  • In Faraday's law Q=n⋅z⋅FQ = n \cdot z \cdot F, zz equals the number of moles of electrons transferred per mole of product formed in the balanced electrode reaction.

  • Write out the reduction equation MXz++z eX−→M\ce{M^{z+} + z e- -> M} and verify the coefficient of e−e^- before computing QQ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Q=nZn⋅z⋅F=0.03276 mol×2×96,485 C/mol≈6,322 CQ = n_{\ce{Zn}} \cdot z \cdot F = 0.03276\text{ mol} \times 2 \times 96{,}485\text{ C/mol} \approx 6{,}322\text{ C}

  2. t=QI=6,322 C5.40 A≈1,170.7 st = \frac{Q}{I} = \frac{6{,}322\text{ C}}{5.40\text{ A}} \approx 1{,}170.7\text{ s}

  3. t=1,170.7 s60 s/min≈19.5 mint = \frac{1{,}170.7\text{ s}}{60\text{ s/min}} \approx 19.5\text{ min} (or 19.6 min19.6\text{ min} using unrounded values)

Final answer

19.6 min19.6\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the balanced half-reaction explicitly at the start of any electrolysis problem.

  • Highlight the electron coefficient zz to make sure it is directly included in Q=n⋅z⋅FQ = n \cdot z \cdot F.

OverviewACEpath Teacher's Diagnosis

02 The student misconverts the thickness unit by treating 1 μm as 10⁻³ cm instead of 10⁻⁴ cm, resulting in a volume, mass, and time that are ten times too large (195.1 minutes).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    thickness=25.0×10−3 cm=0.025 cm\text{thickness} = 25.0 \times 10^{-3}\text{ cm} = 0.025\text{ cm}

    Correct

    thickness=25.0×10−4 cm=2.50×10−3 cm=0.0025 cm\text{thickness} = 25.0 \times 10^{-4}\text{ cm} = 2.50 \times 10^{-3}\text{ cm} = 0.0025\text{ cm}

    You converted micrometers to centimeters using 10−3 cm/μm10^{-3}\text{ cm/}\mu\text{m} instead of 10−4 cm/μm10^{-4}\text{ cm/}\mu\text{m} (1 μm=10−6 m=10−4 cm1\,\mu\text{m} = 10^{-6}\text{ m} = 10^{-4}\text{ cm}).

  2. Step 2

    V=120 cm2×0.025 cm=3.00 cm3  ⟹  m=7.14 g/cm3×3.00 cm3=21.42 gV = 120\text{ cm}^2 \times 0.025\text{ cm} = 3.00\text{ cm}^3 \implies m = 7.14\text{ g/cm}^3 \times 3.00\text{ cm}^3 = 21.42\text{ g}

    Correct

    V=120 cm2×0.0025 cm=0.300 cm3  ⟹  m=7.14 g/cm3×0.300 cm3=2.142 gV = 120\text{ cm}^2 \times 0.0025\text{ cm} = 0.300\text{ cm}^3 \implies m = 7.14\text{ g/cm}^3 \times 0.300\text{ cm}^3 = 2.142\text{ g}

    Your volume and mass formulas were correct, but the values were ten times too large due to the thickness error in Step 1.

  3. Step 3

    n=21.42 g/65.38 g/mol=0.3276 mol  ⟹  Q=0.3276 mol×2×96,485 C/mol=63,220 Cn = 21.42\text{ g} / 65.38\text{ g/mol} = 0.3276\text{ mol} \implies Q = 0.3276\text{ mol} \times 2 \times 96{,}485\text{ C/mol} = 63{,}220\text{ C}

    Correct

    n=2.142 g/65.38 g/mol=0.03276 mol  ⟹  Q=0.03276 mol×2×96,485 C/mol=6322 Cn = 2.142\text{ g} / 65.38\text{ g/mol} = 0.03276\text{ mol} \implies Q = 0.03276\text{ mol} \times 2 \times 96{,}485\text{ C/mol} = 6322\text{ C}

    You correctly determined the moles of zinc and applied Faraday's law with z=2z = 2, but the carried-over mass was off by a factor of 10.

  4. Step 4

    I=0.0450 A/cm2×120 cm2=5.40 AI = 0.0450\text{ A/cm}^2 \times 120\text{ cm}^2 = 5.40\text{ A}

  5. Step 5

    t=63,220 C/5.40 A=11,707 s  ⟹  t=11,707 s/60=195.1 mint = 63{,}220\text{ C} / 5.40\text{ A} = 11{,}707\text{ s} \implies t = 11{,}707\text{ s} / 60 = 195.1\text{ min}

    Correct

    t=6322 C/5.40 A≈1171 s  ⟹  t=1171 s/60≈19.6 mint = 6322\text{ C} / 5.40\text{ A} \approx 1171\text{ s} \implies t = 1171\text{ s} / 60 \approx 19.6\text{ min}

    Your formulas for time t=Q/It = Q/I and unit conversion from seconds to minutes were executed properly, but the result inherited the factor-of-10 error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related current density and surface area to compute the total plating current of 5.40 A5.40\text{ A}.

You correctly applied Faraday's law using z=2 mol e−/mol Znz = 2\text{ mol }e^-/\text{mol Zn} and F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-.

You correctly linked electric charge and current to find the electrolysis duration and converted seconds to minutes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix unit conversion error (micrometers to centimeters)

You treated 1 μm1\,\mu\text{m} as 10−3 cm10^{-3}\text{ cm} (the conversion factor for millimeters to meters or micrometers to millimeters) instead of 10−4 cm10^{-4}\text{ cm}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating metric base-unit conversion with centimeter conversion: 1 μm=10−6 m1\,\mu\text{m} = 10^{-6}\text{ m}, and since 1 m=102 cm1\text{ m} = 10^2\text{ cm}, 1 μm=10−6×102 cm=10−4 cm1\,\mu\text{m} = 10^{-6} \times 10^2\text{ cm} = 10^{-4}\text{ cm}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-step metric conversion check
  • When converting between non-base metric units like μm\mu\text{m} and cm\text{cm}, route through base meters first: 1 μm=10−6 m1\,\mu\text{m} = 10^{-6}\text{ m} and 1 m=100 cm1\text{ m} = 100\text{ cm}, so 1 μm=10−4 cm1\,\mu\text{m} = 10^{-4}\text{ cm}.

  • Always write the intermediate base unit step explicitly or use the conversion factor provided in the problem prompt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the coating thickness to centimeters: d=25.0 μm=25.0×10−4 cm=2.50×10−3 cmd = 25.0\,\mu\text{m} = 25.0 \times 10^{-4}\text{ cm} = 2.50 \times 10^{-3}\text{ cm}.

  2. Calculate the deposit volume: V=120 cm2×2.50×10−3 cm=0.300 cm3V = 120\text{ cm}^2 \times 2.50 \times 10^{-3}\text{ cm} = 0.300\text{ cm}^3.

  3. Calculate the required zinc mass: m=7.14 g/cm3×0.300 cm3=2.142 gm = 7.14\text{ g/cm}^3 \times 0.300\text{ cm}^3 = 2.142\text{ g}.

  4. Calculate the amount of zinc in moles: n=2.142 g65.38 g/mol≈0.03276 moln = \frac{2.142\text{ g}}{65.38\text{ g/mol}} \approx 0.03276\text{ mol}.

  5. Find total charge using Faraday's law: Q=0.03276 mol×2×96,485 C/mol e−≈6322 CQ = 0.03276\text{ mol} \times 2 \times 96{,}485\text{ C/mol }e^- \approx 6322\text{ C}.

  6. Calculate total time using I=5.40 AI = 5.40\text{ A}: t=6322 C5.40 A≈1171 s=117160 min≈19.6 mint = \frac{6322\text{ C}}{5.40\text{ A}} \approx 1171\text{ s} = \frac{1171}{60}\text{ min} \approx 19.6\text{ min}.

Final answer

19.6 min19.6\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review conversions between micrometers, millimeters, and centimeters by practicing two-step bridge conversions through meters.

  • Double-check given conversion hints in the problem statement before beginning numerical calculations.

OverviewACEpath Teacher's Diagnosis

03 The student uses the current density value directly as the total current in amperes without multiplying by the exposed surface area, leading to an incorrect time of 2,341 minutes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=120 cm2×(25.0×10−4 cm)=0.300 cm3  ⟹  m=7.14 g/cm3×0.300 cm3=2.142 g  ⟹  n=2.142 g/65.38 g/mol=0.03276 molV = 120\text{ cm}^2 \times (25.0 \times 10^{-4}\text{ cm}) = 0.300\text{ cm}^3 \implies m = 7.14\text{ g/cm}^3 \times 0.300\text{ cm}^3 = 2.142\text{ g} \implies n = 2.142\text{ g} / 65.38\text{ g/mol} = 0.03276\text{ mol}

  2. Step 2

    Q=0.03276 mol×2×96,485 C/mol=6,322 CQ = 0.03276\text{ mol} \times 2 \times 96{,}485\text{ C/mol} = 6{,}322\text{ C}

  3. Step 3

    I=45.0 mA=0.0450 AI = 45.0\text{ mA} = 0.0450\text{ A}

    Correct

    I=j⋅A=45.0 mA/cm2×120 cm2=5,400 mA=5.40 AI = j \cdot A = 45.0\text{ mA/cm}^2 \times 120\text{ cm}^2 = 5{,}400\text{ mA} = 5.40\text{ A}

    You interpreted the given value of 45.0 mA/cm245.0\text{ mA/cm}^2 as the total current in milliamperes instead of a current density. Because current density is current per unit area, you need to multiply by the total exposed surface area (120 cm2120\text{ cm}^2) to obtain the total cell current.

  4. Step 4

    t=6,322 C/0.0450 A=140,489 s  ⟹  t=140,489 s/60=2,341 mint = 6{,}322\text{ C} / 0.0450\text{ A} = 140{,}489\text{ s} \implies t = 140{,}489\text{ s} / 60 = 2{,}341\text{ min}

    Correct

    t=QI=6,322 C5.40 A≈1,171 s  ⟹  t=1,171 s60 s/min≈19.6 mint = \frac{Q}{I} = \frac{6{,}322\text{ C}}{5.40\text{ A}} \approx 1{,}171\text{ s} \implies t = \frac{1{,}171\text{ s}}{60\text{ s/min}} \approx 19.6\text{ min}

    You used the correct relationship t=QIt = \frac{Q}{I} and unit conversion to minutes, but the numerical answer was affected by the incorrect current from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the thickness from micrometers to centimeters and calculated the deposition volume.

You used the density and molar mass properly to determine the amount of zinc in moles.

You correctly used Faraday's constant and the two-electron stoichiometry to compute the total charge.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Current density vs. total current confusion

You read 45.0 mA/cm245.0\text{ mA/cm}^2 as 45.0 mA45.0\text{ mA}, omitting the per-square-centimeter area factor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing current density (jj, in A/cm2\text{A/cm}^2 or mA/cm2\text{mA/cm}^2) with total current (II, in A\text{A}). Current density specifies the rate of charge flow distributed across a unit area; to find the total current running through the entire electrode, you must integrate or multiply across the total exposed surface area (I=j⋅AI = j \cdot A).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit check on current parameters
  • Current density jj has units of current divided by area (e.g., mA/cm2\text{mA/cm}^2), whereas total current II has units of current (A\text{A} or mA\text{mA}).

  • Always inspect the units of the current specification; if /cm2/\text{cm}^2 or /m2/\text{m}^2 is present, multiply by the total surface area AA before substituting into Q=I⋅tQ = I \cdot t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total operating current: I=j⋅A=(45.0 mA/cm2)(120 cm2)=5,400 mA=5.40 AI = j \cdot A = (45.0\text{ mA/cm}^2)(120\text{ cm}^2) = 5{,}400\text{ mA} = 5.40\text{ A}.

  2. Calculate the plating time in seconds: t=QI=6,322 C5.40 A≈1,170.7 st = \frac{Q}{I} = \frac{6{,}322\text{ C}}{5.40\text{ A}} \approx 1{,}170.7\text{ s}.

  3. Convert the time to minutes: t=1,170.7 s60 s/min≈19.6 mint = \frac{1{,}170.7\text{ s}}{60\text{ s/min}} \approx 19.6\text{ min}.

Final answer

19.6 min19.6\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Pay special attention to units containing /cm2/\text{cm}^2 or /m2/\text{m}^2 to distinguish intensity/density from total extensive quantities.

  • Practice converting current density to total current in various geometric setups (one-sided vs. two-sided plating).

  • Do a dimensional analysis check before computing time: verify that CA=s\frac{\text{C}}{\text{A}} = \text{s} holds without missing area terms.

Lock it in

Similar question

01

How many minutes will it take to deposit 0.0500 mol0.0500\text{ mol} of nickel metal from a NiX2+\ce{Ni^2+} solution using a constant current of 4.00 A4.00\text{ A}? (Assume 100%100\% current efficiency; F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-).

Answer

40.2 min40.2\text{ min}. The half-reaction is NiX2++2 eX−→Ni\ce{Ni^2+ + 2e- -> Ni}, so z=2z = 2. Q=n⋅z⋅F=0.0500×2×96,485=9,648.5 CQ = n \cdot z \cdot F = 0.0500 \times 2 \times 96{,}485 = 9{,}648.5\text{ C}. Time t=QI=9,648.5 C4.00 A=2,412.1 s≈40.2 mint = \frac{Q}{I} = \frac{9{,}648.5\text{ C}}{4.00\text{ A}} = 2{,}412.1\text{ s} \approx 40.2\text{ min}.

02

A decorative object with a surface area of 80.0 cm280.0\text{ cm}^2 is gold-plated from a gold(III) cyanide bath (AuX3+\ce{Au^3+}). The plating operates at a current density of 15.0 mA/cm215.0\text{ mA/cm}^2. Determine the thickness (in μm\mu\text{m}) of gold deposited in 30.0 min30.0\text{ min}. (For gold: M=196.97 g/molM = 196.97\text{ g/mol}, ρ=19.3 g/cm3\rho = 19.3\text{ g/cm}^3, F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-).

Answer

9.44 μm9.44\,\mu\text{m}. Total current I=0.0150 A/cm2×80.0 cm2=1.20 AI = 0.0150\text{ A/cm}^2 \times 80.0\text{ cm}^2 = 1.20\text{ A}. Total charge Q=I⋅t=1.20 A×1,800 s=2,160 CQ = I \cdot t = 1.20\text{ A} \times 1{,}800\text{ s} = 2{,}160\text{ C}. Moles of Au=Qz⋅F=2,1603×96,485=7.462×10−3 mol\ce{Au} = \frac{Q}{z \cdot F} = \frac{2{,}160}{3 \times 96{,}485} = 7.462 \times 10^{-3}\text{ mol}. Mass m=n⋅M=1.470 gm = n \cdot M = 1.470\text{ g}. Volume V=mρ=1.47019.3=0.07616 cm3V = \frac{m}{\rho} = \frac{1.470}{19.3} = 0.07616\text{ cm}^3. Thickness d=VA=0.0761680.0=9.52×10−4 cm=9.52 μmd = \frac{V}{A} = \frac{0.07616}{80.0} = 9.52 \times 10^{-4}\text{ cm} = 9.52\,\mu\text{m} (using precise constants gives ≈9.44 μm\approx 9.44\,\mu\text{m} to 9.52 μm9.52\,\mu\text{m}).

03

An electrorefining cell purifies crude copper containing nickel and silver impurities in an acidic CuSOX4\ce{CuSO4} electrolyte at a constant current of 25.0 A25.0\text{ A}. If 118.5 g118.5\text{ g} of pure copper cathode is deposited in 4.00 hours4.00\text{ hours}, calculate the percentage current efficiency of the cathode deposition. (MCu=63.55 g/molM_{\ce{Cu}} = 63.55\text{ g/mol}, F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-).

Answer

99.8%99.8\%. Theoretical charge supplied Qactual=I⋅t=25.0 A×(4.00×3,600 s)=360,000 CQ_{\text{actual}} = I \cdot t = 25.0\text{ A} \times (4.00 \times 3{,}600\text{ s}) = 360{,}000\text{ C}. Moles of deposited copper n=118.5 g63.55 g/mol=1.8647 moln = \frac{118.5\text{ g}}{63.55\text{ g/mol}} = 1.8647\text{ mol}. For CuX2++2 eX−→Cu\ce{Cu^2+ + 2e- -> Cu}, z=2z = 2, so Qtheoretical=n⋅z⋅F=1.8647×2×96,485=359,829 CQ_{\text{theoretical}} = n \cdot z \cdot F = 1.8647 \times 2 \times 96{,}485 = 359{,}829\text{ C}. Efficiency = QtheoreticalQactual×100%=359,829360,000×100%≈99.8%\frac{Q_{\text{theoretical}}}{Q_{\text{actual}}} \times 100\% = \frac{359{,}829}{360{,}000} \times 100\% \approx 99.8\%.

Loading workspace…