Resources

A concentrated aqueous solution of nitric acid (HNO3\text{HNO}_3, molar mass 63.01 g/mol63.01\text{ g/mol}) is 68.0%68.0\% HNO3\text{HNO}_3 by mass and has an experimental density of 1.41 g/mL1.41\text{ g/mL}. (a) Calculate the molarity of the concentrated HNO3\text{HNO}_3 solution in mol/L\text{mol/L}. (b) If the textbook reference molarity for this commercial grade solution is 15.4 M15.4\text{ M}, calculate the percent error of the molarity calculated from this density measurement.

Answer and steps

Final answer

(a) 15.2 M15.2\text{ M}; (b) −1.3%-1.3\%

Steps

Part (a): Calculating the Molarity of the Solution

Molarity (MM) is defined as moles of solute per liter of solution: M=moles of soluteliters of solutionM = \frac{\text{moles of solute}}{\text{liters of solution}}

To find the molarity from density and mass percent, choose a convenient basis of 1.00 L1.00\text{ L} (1000 mL1000\text{ mL}) of solution.

  1. Calculate the total mass of 1.00 L1.00\text{ L} of solution: Using the experimental density (ρ=1.41 g/mL\rho = 1.41\text{ g/mL}): Mass of solution=density⋅volume=1.41 g/mL⋅1000 mL=1410 g\text{Mass of solution} = \text{density} \cdot \text{volume} = 1.41\text{ g/mL} \cdot 1000\text{ mL} = 1410\text{ g}
  2. Calculate the mass of pure HNOX3\ce{HNO3} in the solution: Since the solution is 68.0%68.0\% HNOX3\ce{HNO3} by mass: Mass of HNOX3=1410 g⋅0.680=958.8 g\text{Mass of }\ce{HNO3} = 1410\text{ g} \cdot 0.680 = 958.8\text{ g}
  3. Convert the mass of HNOX3\ce{HNO3} to moles: Using the molar mass of HNOX3\ce{HNO3} (63.01 g/mol63.01\text{ g/mol}): Moles of HNOX3=958.8 g63.01 g/mol≈15.217 mol\text{Moles of }\ce{HNO3} = \frac{958.8\text{ g}}{63.01\text{ g/mol}} \approx 15.217\text{ mol}
  4. Calculate molarity: Because this amount of solute is present in exactly 1.00 L1.00\text{ L} of solution: M=15.217 mol1.00 L≈15.2 MM = \frac{15.217\text{ mol}}{1.00\text{ L}} \approx 15.2\text{ M} (Rounded to three significant figures according to the given data).

Part (b): Calculating the Percent Error

The formula for percent error is: Percent Error=Experimental Value−Accepted ValueAccepted Value⋅100%\text{Percent Error} = \frac{\text{Experimental Value} - \text{Accepted Value}}{\text{Accepted Value}} \cdot 100\%

Using the experimental molarity (15.2 M15.2\text{ M}) and the reference molarity (15.4 M15.4\text{ M}): Percent Error=15.2 M−15.4 M15.4 M⋅100%=−0.2 M15.4 M⋅100%≈−1.3%\text{Percent Error} = \frac{15.2\text{ M} - 15.4\text{ M}}{15.4\text{ M}} \cdot 100\% = \frac{-0.2\text{ M}}{15.4\text{ M}} \cdot 100\% \approx -1.3\%

Note: The negative sign indicates that the experimentally calculated molarity is lower than the accepted reference value.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply by the solution density, treating 1 L of solution as having a mass of 1000 g rather than 1410 g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Mass of 1 L solution=1000 g\text{Mass of 1 L solution} = 1000\text{ g}

    Correct

    Mass of 1 L solution=1000 mL×1.41 g/mL=1410 g\text{Mass of 1 L solution} = 1000\text{ mL} \times 1.41\text{ g/mL} = 1410\text{ g}

    You treated the concentrated solution as if its density were 1.00 g/mL1.00\text{ g/mL} like pure water. To find the mass of 1 L1\text{ L} of solution, you must multiply the volume (1000 mL1000\text{ mL}) by the solution's actual density (1.41 g/mL1.41\text{ g/mL}).

  2. Step 2

    Mass of HNOX3=1000 g×0.680=680 g  ⟹  Moles of HNOX3=680 g63.01 g/mol=10.79 mol\text{Mass of }\ce{HNO3} = 1000\text{ g} \times 0.680 = 680\text{ g} \implies \text{Moles of }\ce{HNO3} = \frac{680\text{ g}}{63.01\text{ g/mol}} = 10.79\text{ mol}

    Correct

    Mass of HNOX3=1410 g×0.680=958.8 g  ⟹  Moles of HNOX3=958.8 g63.01 g/mol≈15.22 mol\text{Mass of }\ce{HNO3} = 1410\text{ g} \times 0.680 = 958.8\text{ g} \implies \text{Moles of }\ce{HNO3} = \frac{958.8\text{ g}}{63.01\text{ g/mol}} \approx 15.22\text{ mol}

    Your method for calculating the solute mass using the mass percentage (68.0%68.0\%) and converting it to moles using the molar mass was completely sound, but the numerical result was affected by the initial solution mass error.

  3. Step 3

    Molarity=10.79 mol1.00 L=10.8 mol/L\text{Molarity} = \frac{10.79\text{ mol}}{1.00\text{ L}} = 10.8\text{ mol/L}

    Correct

    Molarity=15.22 mol1.00 L≈15.2 M\text{Molarity} = \frac{15.22\text{ mol}}{1.00\text{ L}} \approx 15.2\text{ M}

    You correctly applied the definition of molarity as moles per liter of solution, but the value carried over the previous mass error.

  4. Step 4

    Percent error=∣10.79−15.4∣15.4×100%  ⟹  Percent error=4.6115.4×100%=29.9%\text{Percent error} = \frac{|10.79 - 15.4|}{15.4} \times 100\% \implies \text{Percent error} = \frac{4.61}{15.4} \times 100\% = 29.9\%

    Correct

    Percent error=15.2−15.415.4×100%≈−1.3%\text{Percent error} = \frac{15.2 - 15.4}{15.4} \times 100\% \approx -1.3\%

    You used the percent error formula correctly with your calculated molarity, but the propagated molarity value led to an incorrect final percentage.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the mass percentage (68.0%68.0\%) to determine the fraction of solute in the solution.

You accurately converted grams of HNOX3\ce{HNO3} to moles using its molar mass of 63.01 g/mol63.01\text{ g/mol}.

You correctly applied the formula for molarity (M=moleslitersM = \frac{\text{moles}}{\text{liters}}) and the percent error formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Solution Density

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the distinction between pure water and a dense concentrated solution, equating 1 L1\text{ L} (1000 mL1000\text{ mL}) directly to 1000 g1000\text{ g} rather than applying m=ρ×Vm = \rho \times V.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Solution Density
  • For any aqueous solution other than dilute water, Mass of solution=Volume×Density\text{Mass of solution} = \text{Volume} \times \text{Density}.

  • Always convert a 1.00 L1.00\text{ L} (1000 mL1000\text{ mL}) basis to grams by multiplying by the given density before applying mass percentages.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate total mass of 1.00 L1.00\text{ L} solution: msolution=1000 mL×1.41 g/mL=1410 gm_{\text{solution}} = 1000\text{ mL} \times 1.41\text{ g/mL} = 1410\text{ g}.

  2. Find mass of pure HNOX3\ce{HNO3}: mHNOX3=1410 g×0.680=958.8 gm_{\ce{HNO3}} = 1410\text{ g} \times 0.680 = 958.8\text{ g}.

  3. Convert mass of HNOX3\ce{HNO3} to moles: nHNOX3=958.8 g63.01 g/mol≈15.217 moln_{\ce{HNO3}} = \frac{958.8\text{ g}}{63.01\text{ g/mol}} \approx 15.217\text{ mol}.

  4. Calculate molarity: M=15.217 mol1.00 L≈15.2 MM = \frac{15.217\text{ mol}}{1.00\text{ L}} \approx 15.2\text{ M}.

  5. Calculate percent error: Percent Error=15.2 M−15.4 M15.4 M×100%≈−1.3%\text{Percent Error} = \frac{15.2\text{ M} - 15.4\text{ M}}{15.4\text{ M}} \times 100\% \approx -1.3\%.

Final answer

(a) 15.2 M15.2\text{ M}; (b) −1.3%-1.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the unit conversion chain explicitly: L solution→mL solution→g solution→g solute→mol solute\text{L solution} \to \text{mL solution} \to \text{g solution} \to \text{g solute} \to \text{mol solute}.

  • Double-check whenever density is provided in the problem statement that it is used to relate solution mass and solution volume.

OverviewACEpath Teacher's Diagnosis

02 The student divides by density instead of multiplying by density when determining the mass of 1 L of solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Mass of 1 L solution=1000 mL1.41 g/mL=709.2 g\text{Mass of } 1\text{ L solution} = \frac{1000\text{ mL}}{1.41\text{ g/mL}} = 709.2\text{ g}

    Correct

    Mass of 1.00 L solution=1000 mL×1.41 g/mL=1410 g\text{Mass of } 1.00\text{ L solution} = 1000\text{ mL} \times 1.41\text{ g/mL} = 1410\text{ g}

    You divided the volume by density instead of multiplying. Since density=massvolume\text{density} = \frac{\text{mass}}{\text{volume}}, the mass is obtained by multiplying volume by density: mass=volume×density\text{mass} = \text{volume} \times \text{density}.

  2. Step 2

    Mass of HNOX3=709.2 g×0.680=482.3 g\text{Mass of } \ce{HNO3} = 709.2\text{ g} \times 0.680 = 482.3\text{ g}

    Correct

    Mass of HNOX3=1410 g×0.680=958.8 g\text{Mass of } \ce{HNO3} = 1410\text{ g} \times 0.680 = 958.8\text{ g}

    Your method of multiplying the total solution mass by the mass percent (68.0%68.0\%) was correct, but this step inherited the incorrect solution mass from Step 1.

  3. Step 3

    Moles of HNOX3=482.3 g63.01 g/mol=7.65 mol\text{Moles of } \ce{HNO3} = \frac{482.3\text{ g}}{63.01\text{ g/mol}} = 7.65\text{ mol}

    Correct

    Moles of HNOX3=958.8 g63.01 g/mol≈15.22 mol\text{Moles of } \ce{HNO3} = \frac{958.8\text{ g}}{63.01\text{ g/mol}} \approx 15.22\text{ mol}

    You correctly divided the solute mass by its molar mass to find moles, but the numerical value was affected by the earlier calculation.

  4. Step 4

    Molarity=7.65 mol1.00 L=7.65 mol/L\text{Molarity} = \frac{7.65\text{ mol}}{1.00\text{ L}} = 7.65\text{ mol/L}

    Correct

    Molarity=15.22 mol1.00 L≈15.2 M\text{Molarity} = \frac{15.22\text{ mol}}{1.00\text{ L}} \approx 15.2\text{ M}

    Your definition and setup for molarity were completely correct, but the result was carried forward from the initial density error.

  5. Step 5

    Percent error=∣7.65−15.4∣15.4×100%  ⟹  7.7515.4×100%=50.3%\text{Percent error} = \frac{|7.65 - 15.4|}{15.4} \times 100\% \implies \frac{7.75}{15.4} \times 100\% = 50.3\%

    Correct

    Percent error=15.2 M−15.4 M15.4 M×100%≈−1.3%\text{Percent error} = \frac{15.2\text{ M} - 15.4\text{ M}}{15.4\text{ M}} \times 100\% \approx -1.3\%

    You correctly set up the percent error formula using your calculated molarity and the reference molarity, but the value reflects the propagated error.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected a convenient basis of 1.00 L1.00\text{ L} (1000 mL1000\text{ mL}) of solution to organize your calculation.

You correctly used mass percent to determine the mass of the dissolved solute.

You accurately converted grams of solute to moles using the correct molar mass of HNOX3\ce{HNO3}.

You applied the standard percent error formula correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Density Relationship

You divided by density when converting volume to mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated density as volumemass\frac{\text{volume}}{\text{mass}} rather than density=massvolume\text{density} = \frac{\text{mass}}{\text{volume}}. Checking the units (mL/(g/mL)=mL2/g)(\text{mL} / (\text{g/mL}) = \text{mL}^2/\text{g}) reveals that dividing volume by density does not produce grams.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Dimensional Analysis
  • Mass (g)=Volume (mL)×Density (g/mL)\text{Mass (g)} = \text{Volume (mL)} \times \text{Density (g/mL)}

  • Cancel units explicitly before computing: mL×gmL=g\text{mL} \times \frac{\text{g}}{\text{mL}} = \text{g}.

Physical Reality Check
  • A solution denser than water (>1.00 g/mL> 1.00\text{ g/mL}) must have a mass greater than 1000 g1000\text{ g} for a 1.00 L1.00\text{ L} volume.

  • Verify that your computed mass of 1 L1\text{ L} is larger than 1000 g1000\text{ g} when ρ>1.00 g/mL\rho > 1.00\text{ g/mL}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Mass of 1.00 L solution=1000 mL×1.41 g/mL=1410 g\text{Mass of } 1.00\text{ L solution} = 1000\text{ mL} \times 1.41\text{ g/mL} = 1410\text{ g}

  2. Mass of HNOX3=1410 g×0.680=958.8 g\text{Mass of } \ce{HNO3} = 1410\text{ g} \times 0.680 = 958.8\text{ g}

  3. Moles of HNOX3=958.8 g63.01 g/mol=15.217 mol\text{Moles of } \ce{HNO3} = \frac{958.8\text{ g}}{63.01\text{ g/mol}} = 15.217\text{ mol}

  4. Molarity=15.217 mol1.00 L≈15.2 M\text{Molarity} = \frac{15.217\text{ mol}}{1.00\text{ L}} \approx 15.2\text{ M}

  5. Percent error=15.2 M−15.4 M15.4 M×100%≈−1.3%\text{Percent error} = \frac{15.2\text{ M} - 15.4\text{ M}}{15.4\text{ M}} \times 100\% \approx -1.3\%

Final answer

(a) 15.2 M15.2\text{ M}; (b) −1.3%-1.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the units alongside your numbers to check if the desired unit is produced by multiplication or division.

  • Do a sanity check: if density is greater than 1 g/mL1\text{ g/mL}, the mass of 1 L1\text{ L} must exceed 1000 g1000\text{ g}.

OverviewACEpath Teacher's Diagnosis

03 The student divides by the experimental value instead of the accepted reference value in the denominator of the percent error formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Mass of 1 L solution=1000 mL×1.41 g/mL=1410 g  ⟹  Mass of HNOX3=1410 g×0.680=958.8 g\text{Mass of }1\text{ L solution} = 1000\text{ mL} \times 1.41\text{ g/mL} = 1410\text{ g} \implies \text{Mass of }\ce{HNO3} = 1410\text{ g} \times 0.680 = 958.8\text{ g}

  2. Step 2

    Moles of HNOX3=958.8 g63.01 g/mol=15.22 mol  ⟹  Molarity=15.22 mol1.00 L=15.2 mol/L\text{Moles of }\ce{HNO3} = \frac{958.8\text{ g}}{63.01\text{ g/mol}} = 15.22\text{ mol} \implies \text{Molarity} = \frac{15.22\text{ mol}}{1.00\text{ L}} = 15.2\text{ mol/L}

  3. Step 3

    Percent error=∣15.22−15.4∣15.22×100%  ⟹  Percent error=0.1815.22×100%=1.18%\text{Percent error} = \frac{|15.22 - 15.4|}{15.22} \times 100\% \implies \text{Percent error} = \frac{0.18}{15.22} \times 100\% = 1.18\%

    Correct

    Percent error=15.2 M−15.4 M15.4 M×100%≈−1.3%\text{Percent error} = \frac{15.2\text{ M} - 15.4\text{ M}}{15.4\text{ M}} \times 100\% \approx -1.3\% (or ∣−1.3%∣=1.3%|{-1.3\%}| = 1.3\%)

    You divided by your calculated experimental value (15.2215.22) instead of the accepted reference value (15.415.4). The denominator in percent error is always the true or accepted reference standard.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used density and volume to find the total mass of the solution.

You correctly applied mass percent to determine the mass of dissolved nitric acid.

You accurately calculated the moles of solute and stated the correct molarity with appropriate significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percent Error Base Misidentification

You placed the experimental value (15.22 M15.22\text{ M}) in the denominator rather than the reference value (15.4 M15.4\text{ M}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the baseline (reference/accepted standard) with the measured quantity when calculating relative discrepancy. Percent error evaluates how far an experimental result deviates relative to the accepted value, so the accepted value must serve as the denominator base.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Reference Standard
  • Percent Error=Experimental−AcceptedAccepted×100%\text{Percent Error} = \frac{\text{Experimental} - \text{Accepted}}{\text{Accepted}} \times 100\%

  • Always identify the accepted, theoretical, or literature standard first and write it in the denominator before substituting values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the accepted reference value: Accepted=15.4 M\text{Accepted} = 15.4\text{ M}.

  2. Identify the experimental value: Experimental=15.2 M\text{Experimental} = 15.2\text{ M} (or 15.22 M15.22\text{ M}).

  3. Substitute into the standard percent error formula: Percent Error=15.2 M−15.4 M15.4 M×100%=−0.2 M15.4 M×100%≈−1.3%\text{Percent Error} = \frac{15.2\text{ M} - 15.4\text{ M}}{15.4\text{ M}} \times 100\% = \frac{-0.2\text{ M}}{15.4\text{ M}} \times 100\% \approx -1.3\%.

Final answer

(a) 15.2 M15.2\text{ M}; (b) −1.3%-1.3\% (or 1.3%1.3\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic: 'Error over Accepted' (the true baseline is always on the bottom).

  • When reading a problem, circle the word 'reference', 'literature', or 'theoretical' to mark your denominator value immediately.

Lock it in

Similar question

01

Concentrated hydrochloric acid (HCl\ce{HCl}, molar mass 36.46 g/mol36.46\text{ g/mol}) is 37.0%37.0\% HCl\ce{HCl} by mass with a density of 1.19 g/mL1.19\text{ g/mL}. Calculate the molarity of this solution.

Answer

12.1 M12.1\text{ M}. Key steps: For 1 L1\text{ L} of solution, mass=1000 mL×1.19 g/mL=1190 g\text{mass} = 1000\text{ mL} \times 1.19\text{ g/mL} = 1190\text{ g}. Solute mass =1190 g×0.370=440.3 g= 1190\text{ g} \times 0.370 = 440.3\text{ g}. Moles of HCl=440.3 g/36.46 g/mol=12.08 mol\ce{HCl} = 440.3\text{ g} / 36.46\text{ g/mol} = 12.08\text{ mol}. Molarity =12.08 mol/1 L≈12.1 M= 12.08\text{ mol} / 1\text{ L} \approx 12.1\text{ M}.

02

A concentrated sulfuric acid solution (HX2SOX4\ce{H2SO4}, molar mass 98.08 g/mol98.08\text{ g/mol}) has a density of 1.84 g/mL1.84\text{ g/mL} and is 96.0%96.0\% HX2SOX4\ce{H2SO4} by mass. (a) Find its molarity. (b) If the accepted literature value is 18.0 M18.0\text{ M}, calculate the percent error.

Answer

(a) 18.0 M18.0\text{ M}; (b) 0.0%0.0\%. Key steps: (a) Mass of 1 L=1000 mL×1.84 g/mL=1840 g1\text{ L} = 1000\text{ mL} \times 1.84\text{ g/mL} = 1840\text{ g}. Mass of HX2SOX4=1840 g×0.960=1766.4 g\ce{H2SO4} = 1840\text{ g} \times 0.960 = 1766.4\text{ g}. Moles =1766.4 g/98.08 g/mol=18.01 mol= 1766.4\text{ g} / 98.08\text{ g/mol} = 18.01\text{ mol}. Molarity =18.0 M= 18.0\text{ M}. (b) Percent error=18.0−18.018.0×100%=0.0%\text{Percent error} = \frac{18.0 - 18.0}{18.0} \times 100\% = 0.0\%.

03

A commercial caustic soda (NaOH\ce{NaOH}, molar mass 40.00 g/mol40.00\text{ g/mol}) solution is 50.0%50.0\% by mass and has a density of 1.53 g/mL1.53\text{ g/mL}. (a) Calculate the molarity of this commercial solution. (b) What volume of this solution is required to prepare 2.50 L2.50\text{ L} of a 0.500 M0.500\text{ M} NaOH\ce{NaOH} solution?

Answer

(a) 19.1 M19.1\text{ M}; (b) 0.0654 L0.0654\text{ L} (65.4 mL65.4\text{ mL}). Key steps: (a) Mass of 1 L=1000 mL×1.53 g/mL=1530 g1\text{ L} = 1000\text{ mL} \times 1.53\text{ g/mL} = 1530\text{ g}. Mass of NaOH=1530 g×0.500=765 g\ce{NaOH} = 1530\text{ g} \times 0.500 = 765\text{ g}. Moles =765 g/40.00 g/mol=19.125 mol= 765\text{ g} / 40.00\text{ g/mol} = 19.125\text{ mol}, so M1=19.1 MM_1 = 19.1\text{ M}. (b) Using M1V1=M2V2M_1 V_1 = M_2 V_2: V1=0.500 M×2.50 L19.125 M≈0.0654 LV_1 = \frac{0.500\text{ M} \times 2.50\text{ L}}{19.125\text{ M}} \approx 0.0654\text{ L}.

Loading workspace…