Resources

In the lower thermosphere at an altitude of 120 km120\text{ km}, the atmosphere is extremely rarefied. The ambient pressure is 2.50×10−5 torr2.50 \times 10^{-5}\text{ torr} and the kinetic temperature reaches 380. K380.\text{ K}. Treat the rarefied gas as an ideal diatomic nitrogen gas (N2\text{N}_2, molecular mass m=4.65×10−26 kgm = 4.65 \times 10^{-26}\text{ kg}, effective hard-sphere collision diameter d=3.64×10−10 md = 3.64 \times 10^{-10}\text{ m}). Using the Boltzmann constant kB=1.381×10−23 J⋅K−1k_B = 1.381 \times 10^{-23}\text{ J}\cdot\text{K}^{-1} and 1 torr=133.322 Pa1\text{ torr} = 133.322\text{ Pa}, calculate the molecular number density N=NV\mathcal{N} = \frac{N}{V} in molecules per cubic meter (m−3\text{m}^{-3}) and the molecular mean free path λ=12πd2N\lambda = \frac{1}{\sqrt{2}\pi d^2 \mathcal{N}} in meters. State whether the continuum fluid mechanics assumption remains valid if a satellite sensor aperture has a characteristic dimension of L=0.100 mL = 0.100\text{ m} (evaluate the Knudsen number Kn=λLK_n = \frac{\lambda}{L}).

Answer and steps

Final answer

N=6.35×1017 m−3\mathcal{N} = 6.35 \times 10^{17}\text{ m}^{-3}, λ=2.68 m\lambda = 2.68\text{ m}, Kn=26.8K_n = 26.8 (continuum assumption is invalid; flow is in the free molecular regime)

Steps

01

Convert Pressure to SI Units

The ambient pressure in the lower thermosphere is given in torr. Converting to pascals (Pa\text{Pa}):

P=(2.50×10−5 torr)×(133.322 Pa⋅torr−1)=3.333×10−3 PaP = (2.50 \times 10^{-5}\text{ torr}) \times \left(133.322\text{ Pa}\cdot\text{torr}^{-1}\right) = 3.333 \times 10^{-3}\text{ Pa}


02

Calculate the Molecular Number Density (N\mathcal{N})

Using the ideal gas equation expressed at the molecular level, P=NkBTP = \mathcal{N} k_B T, solve for the number density N\mathcal{N}:

N=PkBT\mathcal{N} = \frac{P}{k_B T}

Substitute the values for PP, kBk_B, and TT:

N=3.333×10−3 Pa(1.381×10−23 J⋅K−1)(380. K)\mathcal{N} = \frac{3.333 \times 10^{-3}\text{ Pa}}{\left(1.381 \times 10^{-23}\text{ J}\cdot\text{K}^{-1}\right)(380.\text{ K})}

N=3.333×10−35.248×10−21≈6.35×1017 m−3\mathcal{N} = \frac{3.333 \times 10^{-3}}{5.248 \times 10^{-21}} \approx 6.35 \times 10^{17}\text{ m}^{-3}


03

Calculate the Molecular Mean Free Path (λ\lambda)

The mean free path of a hard-sphere gas molecule is given by:

λ=12πd2N\lambda = \frac{1}{\sqrt{2}\pi d^2 \mathcal{N}}

First, compute the effective collision cross-section term 2πd2\sqrt{2}\pi d^2 for d=3.64×10−10 md = 3.64 \times 10^{-10}\text{ m}:

d2=(3.64×10−10 m)2=1.325×10−19 m2d^2 = (3.64 \times 10^{-10}\text{ m})^2 = 1.325 \times 10^{-19}\text{ m}^2

2πd2=2⋅π⋅(1.325×10−19 m2)≈5.886×10−19 m2\sqrt{2}\pi d^2 = \sqrt{2} \cdot \pi \cdot (1.325 \times 10^{-19}\text{ m}^2) \approx 5.886 \times 10^{-19}\text{ m}^2

Now compute λ\lambda:

λ=1(5.886×10−19 m2)(6.351×1017 m−3)=10.3738 m−1≈2.68 m\lambda = \frac{1}{(5.886 \times 10^{-19}\text{ m}^2)(6.351 \times 10^{17}\text{ m}^{-3})} = \frac{1}{0.3738\text{ m}^{-1}} \approx 2.68\text{ m}


04

Evaluate the Knudsen Number (KnK_n) and Validity of Continuum Flow

The Knudsen number characterizes the degree of rarefaction relative to the characteristic scale of an object (L=0.100 mL = 0.100\text{ m}):

Kn=λL=2.68 m0.100 m=26.8K_n = \frac{\lambda}{L} = \frac{2.68\text{ m}}{0.100\text{ m}} = 26.8

  • Continuum Criterion: The continuum fluid mechanics hypothesis requires Kn≪1K_n \ll 1 (typically Kn<0.01K_n < 0.01).
  • When Kn>10K_n > 10, intermolecular collisions are negligible compared to collisions with surfaces, placing the gas well into the free molecular flow regime.

Therefore, the continuum fluid mechanics assumption is invalid for this sensor aperture.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the pressure from torr to pascals before using the ideal gas equation, leading to an incorrect number density and mean free path.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=2.50×10−5 Pa  ⟹  NV=PkBT=2.50×10−5(1.381×10−23)×380.=4.76×1015 m−3P = 2.50 \times 10^{-5}\text{ Pa} \implies \frac{N}{V} = \frac{P}{k_B T} = \frac{2.50 \times 10^{-5}}{(1.381 \times 10^{-23}) \times 380.} = 4.76 \times 10^{15}\text{ m}^{-3}

    Correct

    P=(2.50×10−5 torr)×133.322 Pa⋅torr−1=3.333×10−3 Pa  ⟹  N=3.333×10−3 Pa(1.381×10−23 J⋅K−1)(380. K)≈6.35×1017 m−3P = (2.50 \times 10^{-5}\text{ torr}) \times 133.322\text{ Pa}\cdot\text{torr}^{-1} = 3.333 \times 10^{-3}\text{ Pa} \implies \mathcal{N} = \frac{3.333 \times 10^{-3}\text{ Pa}}{(1.381 \times 10^{-23}\text{ J}\cdot\text{K}^{-1})(380.\text{ K})} \approx 6.35 \times 10^{17}\text{ m}^{-3}

    You correctly selected the ideal gas relationship N=PkBT\mathcal{N} = \frac{P}{k_B T}, but the problem stated P=2.50×10−5 torrP = 2.50 \times 10^{-5}\text{ torr}. Before substituting into SI formulas where kBk_B is in J⋅K−1\text{J}\cdot\text{K}^{-1}, you must convert the pressure into pascals by multiplying by 133.322 Pa⋅torr−1133.322\text{ Pa}\cdot\text{torr}^{-1}.

  2. Step 2

    λ=12πd2(NV)=12×π×(3.64×10−10)2×(4.76×1015)=356 m\lambda = \frac{1}{\sqrt{2}\pi d^2 \left(\frac{N}{V}\right)} = \frac{1}{\sqrt{2} \times \pi \times (3.64 \times 10^{-10})^2 \times (4.76 \times 10^{15})} = 356\text{ m}

    Correct

    λ=12π(3.64×10−10 m)2(6.351×1017 m−3)≈2.68 m\lambda = \frac{1}{\sqrt{2}\pi (3.64 \times 10^{-10}\text{ m})^2 (6.351 \times 10^{17}\text{ m}^{-3})} \approx 2.68\text{ m}

    You applied the mean free path formula correctly to your calculated number density, but the value is scaled up by a factor of roughly 133133 due to the earlier unit conversion error.

  3. Step 3

    Kn=λL=3560.100=3560  ⟹  Kn≫0.01, so the continuum assumption is not valid.K_n = \frac{\lambda}{L} = \frac{356}{0.100} = 3560 \implies K_n \gg 0.01\text{, so the continuum assumption is not valid.}

    Correct

    Kn=2.68 m0.100 m=26.8  ⟹  Kn>10 (continuum assumption is invalid, free molecular flow)K_n = \frac{2.68\text{ m}}{0.100\text{ m}} = 26.8 \implies K_n > 10\text{ (continuum assumption is invalid, free molecular flow)}

    You correctly defined the Knudsen number and applied the criterion for continuum breakdown (Kn≫0.01K_n \gg 0.01), but the numerical value of KnK_n is carried over from the incorrect mean free path.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the molecular ideal gas law N=PkBT\mathcal{N} = \frac{P}{k_B T}.

You used the correct expression for the molecular hard-sphere mean free path λ=12πd2N\lambda = \frac{1}{\sqrt{2}\pi d^2 \mathcal{N}}.

You correctly defined the Knudsen number Kn=λLK_n = \frac{\lambda}{L} and identified that large values of KnK_n invalidate the continuum assumption.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Pressure unit conversion omitted

You copied the pressure magnitude directly with the unit pascals (Pa\text{Pa}) instead of converting from torr.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to check that all input quantities are converted to base SI units (torr to pascals) before substituting them into equations containing SI constants (kBk_B in J⋅K−1\text{J}\cdot\text{K}^{-1}).

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Unit Consistency Check
  • The Boltzmann constant kBk_B uses SI base units (J⋅K−1=kg⋅m2⋅s−2⋅K−1\text{J}\cdot\text{K}^{-1} = \text{kg}\cdot\text{m}^2\cdot\text{s}^{-2}\cdot\text{K}^{-1}), requiring pressure to be in pascals (N⋅m−2\text{N}\cdot\text{m}^{-2}).

  • Always convert non-SI pressure units like torr\text{torr}, mmHg\text{mmHg}, or atm\text{atm} into pascals (1 torr≈133.322 Pa1\text{ torr} \approx 133.322\text{ Pa}) before using P=NkBTP = \mathcal{N} k_B T.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert PP to pascals: P=2.50×10−5 torr×133.322 Pa/torr=3.333×10−3 PaP = 2.50 \times 10^{-5}\text{ torr} \times 133.322\text{ Pa}/\text{torr} = 3.333 \times 10^{-3}\text{ Pa}.

  2. Calculate number density: N=3.333×10−3 Pa(1.381×10−23 J⋅K−1)(380. K)=6.351×1017 m−3\mathcal{N} = \frac{3.333 \times 10^{-3}\text{ Pa}}{(1.381 \times 10^{-23}\text{ J}\cdot\text{K}^{-1})(380.\text{ K})} = 6.351 \times 10^{17}\text{ m}^{-3}.

  3. Calculate mean free path: λ=12π(3.64×10−10 m)2(6.351×1017 m−3)=2.68 m\lambda = \frac{1}{\sqrt{2}\pi (3.64 \times 10^{-10}\text{ m})^2 (6.351 \times 10^{17}\text{ m}^{-3})} = 2.68\text{ m}.

  4. Calculate Knudsen number: Kn=2.68 m0.100 m=26.8K_n = \frac{2.68\text{ m}}{0.100\text{ m}} = 26.8.

Final answer

N=6.35×1017 m−3\mathcal{N} = 6.35 \times 10^{17}\text{ m}^{-3}, λ=2.68 m\lambda = 2.68\text{ m}, Kn=26.8K_n = 26.8 (continuum assumption is invalid)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice explicitly writing conversion factors with unit cancellation before plugging values into microscopic gas formulas.

  • Review the flow regimes associated with the Knudsen number (Kn<0.01K_n < 0.01 for continuum, 0.01<Kn<0.10.01 < K_n < 0.1 for slip flow, and Kn>10K_n > 10 for free molecular flow).

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of √2 in the denominator of the mean free path formula, overestimating the mean free path.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=2.50×10−5×133.322=3.333×10−3 Pa  ⟹  NV=(3.333×10−3)(1.381×10−23)×380.=6.35×1017 m−3P = 2.50 \times 10^{-5} \times 133.322 = 3.333 \times 10^{-3}\text{ Pa} \implies \frac{N}{V} = \frac{(3.333 \times 10^{-3})}{(1.381 \times 10^{-23}) \times 380.} = 6.35 \times 10^{17}\text{ m}^{-3}

  2. Step 2

    λ=1πd2(N/V)  ⟹  λ=1π×(3.64×10−10)2×(6.35×1017)=3.78 m\lambda = \frac{1}{\pi d^2 (N/V)} \implies \lambda = \frac{1}{\pi \times (3.64 \times 10^{-10})^2 \times (6.35 \times 10^{17})} = 3.78\text{ m}

    Correct

    λ=12πd2N=12π(3.64×10−10 m)2(6.35×1017 m−3)≈2.68 m\lambda = \frac{1}{\sqrt{2}\pi d^2 \mathcal{N}} = \frac{1}{\sqrt{2}\pi (3.64 \times 10^{-10}\text{ m})^2 (6.35 \times 10^{17}\text{ m}^{-3})} \approx 2.68\text{ m}

    You omitted the factor of 2\sqrt{2} in the denominator of the mean free path formula. Because all gas molecules move simultaneously rather than colliding with stationary targets, their relative speed is on average 2vˉ\sqrt{2} \bar{v}, introducing 2\sqrt{2} into the denominator.

  3. Step 3

    Kn=λL=3.780.100=37.8  ⟹  Kn≫0.01, so continuum fluid mechanics is not valid.Kn = \frac{\lambda}{L} = \frac{3.78}{0.100} = 37.8 \implies Kn \gg 0.01\text{, so continuum fluid mechanics is not valid.}

    Correct

    Kn=λL=2.68 m0.100 m=26.8  ⟹  Kn≫1, so continuum fluid mechanics is not valid.K_n = \frac{\lambda}{L} = \frac{2.68\text{ m}}{0.100\text{ m}} = 26.8 \implies K_n \gg 1\text{, so continuum fluid mechanics is not valid.}

    Your reasoning about the breakdown of continuum mechanics is completely correct, but the numerical value of KnK_n is affected by the earlier error in λ\lambda.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted pressure from torr to pascals.

You correctly used the microscopic ideal gas law to determine the molecular number density.

You understood that a large Knudsen number (Kn≫0.01K_n \gg 0.01) invalidates the continuum fluid mechanics assumption.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of relative velocity factor in mean free path

You used λ=1πd2N\lambda = \frac{1}{\pi d^2 \mathcal{N}} instead of λ=12πd2N\lambda = \frac{1}{\sqrt{2}\pi d^2 \mathcal{N}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting that gas collisions involve moving target molecules rather than stationary obstacles, which introduces a factor of 2\sqrt{2} to account for the average relative speed ⟨vrel⟩=2⟨v⟩\langle v_{\text{rel}} \rangle = \sqrt{2} \langle v \rangle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mean Free Path for Moving Particles
  • λ=12πd2N\lambda = \frac{1}{\sqrt{2}\pi d^2 \mathcal{N}}

  • Always include 2\sqrt{2} in the denominator when calculating the mean free path of an actual thermal gas where all molecules are moving.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include 2\sqrt{2} in the denominator: λ=12πd2N\lambda = \frac{1}{\sqrt{2}\pi d^2 \mathcal{N}}.

  2. Compute the effective cross-section term: 2πd2=2π(3.64×10−10 m)2≈5.886×10−19 m2\sqrt{2}\pi d^2 = \sqrt{2}\pi (3.64 \times 10^{-10}\text{ m})^2 \approx 5.886 \times 10^{-19}\text{ m}^2.

  3. Divide by the product: λ=1(5.886×10−19 m2)(6.351×1017 m−3)≈2.68 m\lambda = \frac{1}{(5.886 \times 10^{-19}\text{ m}^2)(6.351 \times 10^{17}\text{ m}^{-3})} \approx 2.68\text{ m}.

  4. Recalculate the Knudsen number: Kn=λL=2.68 m0.100 m=26.8K_n = \frac{\lambda}{L} = \frac{2.68\text{ m}}{0.100\text{ m}} = 26.8.

Final answer

N=6.35×1017 m−3\mathcal{N} = 6.35 \times 10^{17}\text{ m}^{-3}, λ=2.68 m\lambda = 2.68\text{ m}, Kn=26.8K_n = 26.8 (continuum assumption is invalid)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why relative velocity among Maxwellian particles yields an extra factor of 2\sqrt{2} compared to collisions with fixed scatterers.

  • Practice checking whether the formula used for mean free path includes the hard-sphere thermal motion correction before plugging in numbers.

OverviewACEpath Teacher's Diagnosis

03 The student misunderstands the criterion for the Knudsen number and concludes that the continuum assumption is valid because Kn is much larger than 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=2.50×10−5×133.322=3.333×10−3 Pa  ⟹  NV=3.333×10−3(1.381×10−23)×380.=6.35×1017 m−3P = 2.50 \times 10^{-5} \times 133.322 = 3.333 \times 10^{-3}\text{ Pa} \implies \frac{N}{V} = \frac{3.333 \times 10^{-3}}{(1.381 \times 10^{-23}) \times 380.} = 6.35 \times 10^{17}\text{ m}^{-3}

  2. Step 2

    λ=12πd2(N/V)=12×π×(3.64×10−10)2×(6.35×1017)=2.67 m\lambda = \frac{1}{\sqrt{2}\pi d^2 (N/V)} = \frac{1}{\sqrt{2} \times \pi \times (3.64 \times 10^{-10})^2 \times (6.35 \times 10^{17})} = 2.67\text{ m}

  3. Step 3

    Kn=λL=2.670.100=26.7K_n = \frac{\lambda}{L} = \frac{2.67}{0.100} = 26.7

  4. Step 4

    Because Kn>1, continuum fluid mechanics is valid.\text{Because } K_n > 1\text{, continuum fluid mechanics is valid.}

    Correct

    Because Kn=26.8≫1 (specifically Kn>10), the continuum fluid mechanics assumption is invalid; the flow is in the free molecular regime.\text{Because } K_n = 26.8 \gg 1\text{ (specifically } K_n > 10\text{), the continuum fluid mechanics assumption is invalid; the flow is in the free molecular regime.}

    A fluid behaves as a continuum only when molecules collide with each other far more frequently than with the boundary surfaces, which requires λ≪L\lambda \ll L, or Kn≪1K_n \ll 1 (typically Kn<0.01K_n < 0.01). Because Kn=26.7≫1K_n = 26.7 \gg 1, molecules travel much farther than the aperture dimension before colliding with another molecule, meaning continuum fluid mechanics breaks down.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted pressure from torr to SI units (3.333×10−3 Pa3.333 \times 10^{-3}\text{ Pa}).

You applied the microscopic ideal gas law N=PkBT\mathcal{N} = \frac{P}{k_B T} with proper constants to find the molecular number density.

You accurately calculated the molecular mean free path and Knudsen number using the given geometric parameters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Knudsen Number Continuum Criterion
WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the condition for continuum validity by assuming that a larger Knudsen number (Kn>1K_n > 1) supports continuum flow, rather than recognizing that continuum mechanics requires Kn≪1K_n \ll 1 where intermolecular collisions dominate over boundary interactions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Knudsen Number ($K_n$) Physical Meaning
  • Kn=λLK_n = \frac{\lambda}{L}, where λ\lambda is the molecular mean free path and LL is the characteristic physical scale of the system.

  • Check whether molecules collide predominantly with each other (λ≪L\lambda \ll L) or with the walls (λ≫L\lambda \gg L).

Flow Regime Criteria
  • Kn<0.01K_n < 0.01: Continuum flow; 0.01<Kn<0.10.01 < K_n < 0.1: Slip flow; 0.1<Kn<100.1 < K_n < 10: Transitional flow; Kn>10K_n > 10: Free molecular flow.

  • Always verify that Kn<0.01K_n < 0.01 (or at least Kn≪1K_n \ll 1) before assuming Navier-Stokes / continuum fluid equations apply.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the magnitude of the calculated Knudsen number: Kn=2.68 m0.100 m=26.8K_n = \frac{2.68\text{ m}}{0.100\text{ m}} = 26.8.

  2. Compare KnK_n against the continuum threshold: continuum mechanics requires Kn≪1K_n \ll 1 (strictly Kn<0.01K_n < 0.01).

  3. Identify the regime: since Kn=26.8>10K_n = 26.8 > 10, the flow is in the free molecular regime where particle-surface collisions dominate over particle-particle collisions.

  4. Conclude whether the continuum assumption holds: the continuum assumption is invalid.

Final answer

N=6.35×1017 m−3\mathcal{N} = 6.35 \times 10^{17}\text{ m}^{-3}, λ=2.68 m\lambda = 2.68\text{ m}, Kn=26.8K_n = 26.8; the continuum fluid mechanics assumption is invalid (free molecular flow regime).

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the physical intuition: continuum flow requires molecules to be packed densely enough that λ≪L\lambda \ll L (Kn<0.01K_n < 0.01).

  • Review the four Knudsen number flow regimes: continuum, slip, transition, and free molecular flow.

Lock it in

Similar question

01

A vacuum chamber is evacuated to an ambient pressure of 1.50×10−4 torr1.50 \times 10^{-4}\text{ torr} at a temperature of 300. K300.\text{ K}. Calculate the molecular number density N\mathcal{N} in m−3\text{m}^{-3}. (Use kB=1.381×10−23 J⋅K−1k_B = 1.381 \times 10^{-23}\text{ J}\cdot\text{K}^{-1} and 1 torr=133.322 Pa1\text{ torr} = 133.322\text{ Pa}).

Answer

P=1.50×10−4×133.322 Pa=2.000×10−2 PaP = 1.50 \times 10^{-4} \times 133.322\text{ Pa} = 2.000 \times 10^{-2}\text{ Pa}. Then N=PkBT=2.000×10−2(1.381×10−23)(300.)≈4.83×1018 m−3\mathcal{N} = \frac{P}{k_B T} = \frac{2.000 \times 10^{-2}}{(1.381 \times 10^{-23})(300.)} \approx 4.83 \times 10^{18}\text{ m}^{-3}.

02

In a low-pressure chemical vapor deposition chamber, argon gas (d=3.40×10−10 md = 3.40 \times 10^{-10}\text{ m}) is held at P=0.200 torrP = 0.200\text{ torr} and T=500. KT = 500.\text{ K}. Determine the mean free path λ\lambda of argon molecules in meters.

Answer

P=0.200×133.322=26.66 PaP = 0.200 \times 133.322 = 26.66\text{ Pa}. Number density N=26.66(1.381×10−23)(500.)=3.861×1021 m−3\mathcal{N} = \frac{26.66}{(1.381 \times 10^{-23})(500.)} = 3.861 \times 10^{21}\text{ m}^{-3}. Mean free path λ=12πd2N=12π(3.40×10−10)2(3.861×1021)≈5.05×10−4 m\lambda = \frac{1}{\sqrt{2}\pi d^2 \mathcal{N}} = \frac{1}{\sqrt{2}\pi (3.40 \times 10^{-10})^2 (3.861 \times 10^{21})} \approx 5.05 \times 10^{-4}\text{ m} (or 0.505 mm0.505\text{ mm}).

03

A microchannel in a MEMS pressure sensor has a hydraulic diameter of D=25.0 μmD = 25.0\ \mu\text{m}. Nitrogen gas at T=300. KT = 300.\text{ K} flows through the microchannel. What is the maximum pressure in torr at which the continuum flow assumption breaks down (defined here as Kn≥0.01K_n \ge 0.01)? Assume nitrogen has an effective diameter d=3.64×10−10 md = 3.64 \times 10^{-10}\text{ m}.

Answer

For Kn=λD=0.01K_n = \frac{\lambda}{D} = 0.01, the threshold mean free path is λ=0.01×(25.0×10−6 m)=2.50×10−7 m\lambda = 0.01 \times (25.0 \times 10^{-6}\text{ m}) = 2.50 \times 10^{-7}\text{ m}. Using λ=kBT2πd2P\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P}, solve for pressure: P=kBT2πd2λ=(1.381×10−23)(300.)2π(3.64×10−10)2(2.50×10−7)≈28.16 PaP = \frac{k_B T}{\sqrt{2}\pi d^2 \lambda} = \frac{(1.381 \times 10^{-23})(300.)}{\sqrt{2}\pi (3.64 \times 10^{-10})^2 (2.50 \times 10^{-7})} \approx 28.16\text{ Pa}. Converting to torr: P=28.16133.322≈0.211 torrP = \frac{28.16}{133.322} \approx 0.211\text{ torr}. Thus, continuum flow breaks down when pressure drops to or below 0.211 torr0.211\text{ torr}.

Loading workspace…