Resources

An industrial groundwater analysis detects a trichloroethylene (C2HCl3\text{C}_2\text{HCl}_3, molar mass =131.39 g/mol= 131.39\text{ g/mol}) contamination level of 8.50 ppm8.50\text{ ppm} by mass (equivalent to 8.50 mg8.50\text{ mg} of C2HCl3\text{C}_2\text{HCl}_3 per 1.00 L1.00\text{ L} of aqueous solution, assuming a solution density of 1.00 g/mL1.00\text{ g/mL}). In a 250.0 mL250.0\text{ mL} environmental grab sample, calculate: (a) the mass of trichloroethylene present in grams, (b) the amount of trichloroethylene in millimoles (mmol\text{mmol}), and (c) the total number of chlorine atoms present.

Answer and steps

Final answer

(a) m=2.13×10−3 gm = 2.13 \times 10^{-3}\text{ g}, (b) n=0.0162 mmoln = 0.0162\text{ mmol} (1.62×10−5 mol1.62 \times 10^{-5}\text{ mol}), (c) NCl atoms=2.93×1019 Cl atomsN_{\text{Cl atoms}} = 2.93 \times 10^{19}\text{ Cl atoms}

Steps

Part (a): Mass of Trichloroethylene in Grams

  1. Convert the sample volume to liters: V=250.0 mL×1 L1000 mL=0.2500 LV = 250.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.2500\text{ L}
  2. Calculate the mass in milligrams using the given concentration: A concentration of 8.50 ppm8.50\text{ ppm} in water is equivalent to 8.50 mg/L8.50\text{ mg/L}: Mass in mg=8.50 mg/L×0.2500 L=2.125 mg\text{Mass in mg} = 8.50\text{ mg/L} \times 0.2500\text{ L} = 2.125\text{ mg}
  3. Convert milligrams to grams: m=2.125 mg×1 g1000 mg=2.125×10−3 g≈2.13×10−3 gm = 2.125\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 2.125 \times 10^{-3}\text{ g} \approx 2.13 \times 10^{-3}\text{ g}

Part (b): Amount of Trichloroethylene in Millimoles (mmol\text{mmol})

  1. Calculate the number of moles using the molar mass (M=131.39 g/molM = 131.39\text{ g/mol}): n=mM=2.125×10−3 g131.39 g/mol≈1.6173×10−5 moln = \frac{m}{M} = \frac{2.125 \times 10^{-3}\text{ g}}{131.39\text{ g/mol}} \approx 1.6173 \times 10^{-5}\text{ mol}
  2. Convert moles to millimoles (mmol\text{mmol}): n=1.6173×10−5 mol×1000 mmol1 mol≈0.0162 mmol(1.62×10−5 mol)n = 1.6173 \times 10^{-5}\text{ mol} \times \frac{1000\text{ mmol}}{1\text{ mol}} \approx 0.0162\text{ mmol}\quad (1.62 \times 10^{-5}\text{ mol})

Part (c): Total Number of Chlorine Atoms

  1. Determine the stoichiometric ratio of chlorine atoms per molecule: The chemical formula CX2HClX3\ce{C2HCl3} indicates that each molecule of trichloroethylene contains 33 chlorine (Cl\ce{Cl}) atoms: Moles of Cl atoms=3⋅nCX2HClX3=3⋅(1.6173×10−5 mol)=4.852×10−5 mol\text{Moles of Cl atoms} = 3 \cdot n_{\ce{C2HCl3}} = 3 \cdot (1.6173 \times 10^{-5}\text{ mol}) = 4.852 \times 10^{-5}\text{ mol}
  2. Multiply by Avogadro's number (NA=6.022×1023 atoms/molN_A = 6.022 \times 10^{23}\text{ atoms/mol}): NCl atoms=(Moles of Cl)⋅NAN_{\ce{Cl atoms}} = (\text{Moles of Cl}) \cdot N_A NCl atoms=4.852×10−5 mol×6.022×1023 atoms/mol≈2.93×1019 Cl atomsN_{\ce{Cl atoms}} = 4.852 \times 10^{-5}\text{ mol} \times 6.022 \times 10^{23}\text{ atoms/mol} \approx 2.93 \times 10^{19}\text{ Cl atoms}

Common Pitfall: Remember to multiply by 33 for chlorine atoms; calculating only n⋅NAn \cdot N_A gives the total number of CX2HClX3\ce{C2HCl3} molecules, not individual chlorine atoms.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply the moles of trichloroethylene by the stoichiometric coefficient 3 for chlorine, calculating the number of molecules instead of chlorine atoms.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=250.0 mL=0.2500 L  ⟹  8.50 mg/L×0.2500 L=2.125 mg=0.002125 gV = 250.0\text{ mL} = 0.2500\text{ L} \implies 8.50\text{ mg/L} \times 0.2500\text{ L} = 2.125\text{ mg} = 0.002125\text{ g}

  2. Step 2

    moles=0.002125 g131.39 g/mol=1.617×10−5 mol  ⟹  amount=1.617×10−5 mol×1000 mmol/mol=0.0162 mmol\text{moles} = \frac{0.002125\text{ g}}{131.39\text{ g/mol}} = 1.617 \times 10^{-5}\text{ mol} \implies \text{amount} = 1.617 \times 10^{-5}\text{ mol} \times 1000\text{ mmol/mol} = 0.0162\text{ mmol}

  3. Step 3

    N=1.617×10−5 mol×6.022×1023 atoms/mol=9.74×1018 chlorine atomsN = 1.617 \times 10^{-5}\text{ mol} \times 6.022 \times 10^{23}\text{ atoms/mol} = 9.74 \times 10^{18}\text{ chlorine atoms}

    Correct

    NCl=1.617×10−5 mol×3 mol Clmol CX2HClX3×6.022×1023 atoms/mol≈2.93×1019 Cl atomsN_{\ce{Cl}} = 1.617 \times 10^{-5}\text{ mol} \times 3\,\frac{\text{mol }\ce{Cl}}{\text{mol }\ce{C2HCl3}} \times 6.022 \times 10^{23}\text{ atoms/mol} \approx 2.93 \times 10^{19}\text{ Cl atoms}

    Multiplying moles of compound by Avogadro's number gives the total number of CX2HClX3\ce{C2HCl3} molecules. Because each CX2HClX3\ce{C2HCl3} molecule contains 33 chlorine atoms, you must multiply by 33 to find the total number of chlorine atoms.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted the sample volume from milliliters to liters without error.

You used the ppm concentration and solution volume correctly to find the solute mass in grams.

You converted mass to moles using the correct molar mass and expressed the result in millimoles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Stoichiometric Subscript Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated Avogadro's constant as converting directly from moles of the compound to atoms of a constituent element, omitting the stoichiometric ratio of 3 Cl atoms3\text{ Cl atoms} per molecule of CX2HClX3\ce{C2HCl3}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula Subscripts as Mole Ratios
  • For a molecule AXx BXy\ce{A_x B_y}, 1 mol1\text{ mol} of compound contains x molx\text{ mol} of A\ce{A} and y moly\text{ mol} of B\ce{B}.

  • Always write the conversion factor subscript X atoms1 molecule\frac{\text{subscript }\ce{X}\text{ atoms}}{1\text{ molecule}} or subscript mol X1 mol compound\frac{\text{subscript mol }\ce{X}}{1\text{ mol compound}} before applying Avogadro's number.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the number of Cl\ce{Cl} atoms per molecule from the chemical formula CX2HClX3\ce{C2HCl3}: each molecule contains 3 Cl atoms3\text{ Cl atoms}.

  2. Calculate the moles of chlorine atoms: nCl=3×1.6173×10−5 mol=4.852×10−5 moln_{\ce{Cl}} = 3 \times 1.6173 \times 10^{-5}\text{ mol} = 4.852 \times 10^{-5}\text{ mol}.

  3. Multiply the moles of chlorine atoms by Avogadro's constant: NCl=4.852×10−5 mol×6.022×1023 atoms/mol=2.93×1019 Cl atomsN_{\ce{Cl}} = 4.852 \times 10^{-5}\text{ mol} \times 6.022 \times 10^{23}\text{ atoms/mol} = 2.93 \times 10^{19}\text{ Cl atoms}.

Final answer

2.93×1019 Cl atoms2.93 \times 10^{19}\text{ Cl atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before multiplying by Avogadro's number, explicitly ask yourself whether you are counting whole molecules or a specific atom type within the molecule.

  • Practice using dimensional analysis units like mol CX2HClX3\text{mol }\ce{C2HCl3} and atoms Cl\text{atoms }\ce{Cl} rather than generic labels like 'mol' or 'atoms' to avoid skipping stoichiometric coefficients.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets 8.50 ppm as 8.50 mg in the entire 250.0 mL sample instead of per liter, omitting the volume scaling factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass=0.00850 g\text{mass} = 0.00850\text{ g}

    Correct

    m=8.50 mg/L×0.2500 L=2.125 mg=2.13×10−3 gm = 8.50\text{ mg/L} \times 0.2500\text{ L} = 2.125\text{ mg} = 2.13 \times 10^{-3}\text{ g}

    You converted 8.50 mg8.50\text{ mg} directly to 0.00850 g0.00850\text{ g} as if it were the total mass present in the flask. Because 8.50 ppm8.50\text{ ppm} means 8.50 mg8.50\text{ mg} per 1.00 L1.00\text{ L} of solution, you need to multiply this concentration by the sample volume (0.2500 L0.2500\text{ L}).

  2. Step 2

    moles=0.00850 g131.39 g/mol=6.469×10−5 mol  ⟹  amount=6.469×10−5 mol×1000 mmol/mol=0.0647 mmol\text{moles} = \frac{0.00850\text{ g}}{131.39\text{ g/mol}} = 6.469 \times 10^{-5}\text{ mol} \implies \text{amount} = 6.469 \times 10^{-5}\text{ mol} \times 1000\text{ mmol/mol} = 0.0647\text{ mmol}

    Correct

    n=2.125×10−3 g131.39 g/mol≈1.62×10−5 mol=0.0162 mmoln = \frac{2.125 \times 10^{-3}\text{ g}}{131.39\text{ g/mol}} \approx 1.62 \times 10^{-5}\text{ mol} = 0.0162\text{ mmol}

    Your division by molar mass and subsequent conversion to millimoles were set up correctly, but your numerical answer carries forward the unscaled mass from Step 1.

  3. Step 3

    N=3×6.469×10−5 mol×6.022×1023 atoms/mol=1.17×1020 chlorine atomsN = 3 \times 6.469 \times 10^{-5}\text{ mol} \times 6.022 \times 10^{23}\text{ atoms/mol} = 1.17 \times 10^{20}\text{ chlorine atoms}

    Correct

    NCl=3×(1.6173×10−5 mol)×(6.022×1023 atoms/mol)≈2.93×1019 Cl atomsN_{\text{Cl}} = 3 \times (1.6173 \times 10^{-5}\text{ mol}) \times (6.022 \times 10^{23}\text{ atoms/mol}) \approx 2.93 \times 10^{19}\text{ Cl atoms}

    You correctly accounted for the 33 chlorine atoms per CX2HClX3\ce{C2HCl3} molecule and multiplied by Avogadro's number, but the result is 44 times too large because of the initial unscaled mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted milligrams to grams using the factor 10−3 g/mg10^{-3}\text{ g/mg}.

You correctly applied molar mass to convert mass into moles.

You accurately converted moles into millimoles by multiplying by 1000 mmol/mol1000\text{ mmol/mol}.

You correctly identified that each molecule of CX2HClX3\ce{C2HCl3} contains 33 chlorine atoms and used Avogadro's number to find particle count.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of volume scaling in concentration calculation

You took the concentration figure of 8.50 mg8.50\text{ mg} (which is per liter) as the absolute mass inside the 250.0 mL250.0\text{ mL} container.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating an intensive concentration term (ppm=mg/L\text{ppm} = \text{mg/L}) with an extensive total mass quantity (mm), leading to omission of the m=C×Vm = C \times V step.

REASONING PATH
Your ACEpath teacher’s suggested approach
Concentration vs. Absolute Mass
  • Parts per million in dilute aqueous solutions represents concentration: 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}. Total mass requires multiplying by volume: m=concentration×Vm = \text{concentration} \times V.

  • Always write concentration with full compound units (mg/L\text{mg/L}) rather than just mg\text{mg} to ensure you multiply by the sample volume in liters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}

  2. m=8.50 mg/L×0.2500 L=2.125 mg=2.125×10−3 g≈2.13×10−3 gm = 8.50\text{ mg/L} \times 0.2500\text{ L} = 2.125\text{ mg} = 2.125 \times 10^{-3}\text{ g} \approx 2.13 \times 10^{-3}\text{ g}

  3. n=2.125×10−3 g131.39 g/mol≈1.617×10−5 mol=0.0162 mmoln = \frac{2.125 \times 10^{-3}\text{ g}}{131.39\text{ g/mol}} \approx 1.617 \times 10^{-5}\text{ mol} = 0.0162\text{ mmol}

  4. NCl=3×(1.617×10−5 mol)×(6.022×1023 atoms/mol)≈2.93×1019 Cl atomsN_{\text{Cl}} = 3 \times (1.617 \times 10^{-5}\text{ mol}) \times (6.022 \times 10^{23}\text{ atoms/mol}) \approx 2.93 \times 10^{19}\text{ Cl atoms}

Final answer

(a) 2.13×10−3 g2.13 \times 10^{-3}\text{ g}, (b) 0.0162 mmol0.0162\text{ mmol}, (c) $2.93 ×\times 10^{19} Cl atoms\text{ Cl atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out concentration units explicitly as mg/L\text{mg/L} whenever an environmental analysis problem gives values in ppm\text{ppm}.

  • Perform dimensional analysis on the first line: check that (mg/L)×L=mg(\text{mg/L}) \times \text{L} = \text{mg} before converting to grams.

OverviewACEpath Teacher's Diagnosis

03 The student divides by 1000 instead of multiplying by 1000 when converting from moles to millimoles, yielding an answer in kilomoles labeled as mmol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=250.0 mL=0.2500 L  ⟹  mass=8.50 mg/L×0.2500 L=2.125 mg=0.002125 gV = 250.0\text{ mL} = 0.2500\text{ L} \implies \text{mass} = 8.50\text{ mg/L} \times 0.2500\text{ L} = 2.125\text{ mg} = 0.002125\text{ g}

  2. Step 2

    moles=0.002125 g/131.39 g/mol=1.617×10−5 mol  ⟹  amount=1.617×10−5 mol/1000=1.62×10−8 mmol\text{moles} = 0.002125\text{ g} / 131.39\text{ g/mol} = 1.617 \times 10^{-5}\text{ mol} \implies \text{amount} = 1.617 \times 10^{-5}\text{ mol} / 1000 = 1.62 \times 10^{-8}\text{ mmol}

    Correct

    n=2.125×10−3 g131.39 g/mol×1000 mmol1 mol≈0.0162 mmoln = \frac{2.125 \times 10^{-3}\text{ g}}{131.39\text{ g/mol}} \times \frac{1000\text{ mmol}}{1\text{ mol}} \approx 0.0162\text{ mmol}

    You calculated the correct number of moles, but when converting from moles to millimoles, you divided by 1000 instead of multiplying by 1000. Because a millimole is smaller than a mole (1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}), the numerical value must increase.

  3. Step 3

    N=3×1.617×10−5 mol×6.022×1023 atoms/mol=2.92×1019 chlorine atomsN = 3 \times 1.617 \times 10^{-5}\text{ mol} \times 6.022 \times 10^{23}\text{ atoms/mol} = 2.92 \times 10^{19}\text{ chlorine atoms}

WHAT YOU DID WELL
Compliments from Your Teacher

You converted the solution volume to liters and accurately found the dissolved mass in grams.

You correctly calculated the amount of trichloroethylene in moles using its molar mass.

You accounted for the subscript of 3 chlorine atoms per molecule before multiplying by Avogadro's number.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix inversion in unit conversion

You accidentally divided by the metric factor 10001000 instead of multiplying when converting moles to millimoles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the conversion factor between base SI units and milli-prefixed units. Since 1 mol=103 mmol1\text{ mol} = 10^3\text{ mmol}, converting from a larger unit (moles) to a smaller unit (millimoles) requires multiplying by 1000 mmol/mol1000\text{ mmol/mol}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Size Check
  • A millimole (mmol\text{mmol}) is smaller than a mole (mol\text{mol}), so 1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}.

  • Always check that converting from a larger unit to a smaller unit yields a larger numerical value.

Dimensional Analysis
  • Set up units so they cancel algebraically: mol×1000 mmol1 mol=mmol\text{mol} \times \frac{1000\text{ mmol}}{1\text{ mol}} = \text{mmol}.

  • Write out the fraction with units explicitly in numerator and denominator before carrying out the arithmetic.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the conversion factor with moles in the denominator: 1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}.

  2. Multiply the moles of CX2HClX3\ce{C2HCl3} by 1000 mmol/mol1000\text{ mmol/mol}: n=1.6173×10−5 mol×1000 mmol/moln = 1.6173 \times 10^{-5}\text{ mol} \times 1000\text{ mmol/mol}.

  3. Simplify the result: n=1.62×10−2 mmol=0.0162 mmoln = 1.62 \times 10^{-2}\text{ mmol} = 0.0162\text{ mmol}.

Final answer

(a) m=2.13×10−3 gm = 2.13 \times 10^{-3}\text{ g}, (b) n=0.0162 mmoln = 0.0162\text{ mmol} (1.62×10−5 mol1.62 \times 10^{-5}\text{ mol}), (c) NCl atoms=2.93×1019 Cl atomsN_{\text{Cl atoms}} = 2.93 \times 10^{19}\text{ Cl atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review SI prefix relations: remember that milli (mm) denotes 10−310^{-3}, so there are 10001000 millimoles per mole.

  • Practice using explicit fraction units (dimensional analysis) rather than bare multiplication or division signs.

  • Perform a sanity check: ensure that going from moles to millimoles increases the exponent by +3+3 rather than decreasing it by −3-3.

Lock it in

Similar question

01

A sample contains 2.50×10−4 mol2.50 \times 10^{-4}\text{ mol} of carbon tetrachloride (CClX4\ce{CCl4}). Calculate the total number of chlorine atoms present in the sample.

Answer

6.02×1020 Cl atoms6.02 \times 10^{20}\text{ Cl atoms}. Key steps: NCl=(2.50×10−4 mol)×4 mol Clmol CClX4×(6.022×1023 atoms/mol)=6.022×1020 Cl atomsN_{\ce{Cl}} = (2.50 \times 10^{-4}\text{ mol}) \times 4\,\frac{\text{mol Cl}}{\text{mol }\ce{CCl4}} \times (6.022 \times 10^{23}\text{ atoms/mol}) = 6.022 \times 10^{20}\text{ Cl atoms}.

02

A 500.0 mL500.0\text{ mL} sample of drinking water contains chloroform (CHClX3\ce{CHCl3}, molar mass =119.38 g/mol= 119.38\text{ g/mol}) at a concentration of 2.40 ppm2.40\text{ ppm} (2.40 mg/L2.40\text{ mg/L}). Calculate (a) the mass of chloroform in milligrams and (b) the total number of chlorine atoms in the sample.

Answer

(a) 1.20 mg1.20\text{ mg}; (b) 1.82×1019 Cl atoms1.82 \times 10^{19}\text{ Cl atoms}. Key steps: (a) mass=2.40 mg/L×0.5000 L=1.20 mg\text{mass} = 2.40\text{ mg/L} \times 0.5000\text{ L} = 1.20\text{ mg}. (b) n=1.20×10−3 g119.38 g/mol=1.005×10−5 moln = \frac{1.20 \times 10^{-3}\text{ g}}{119.38\text{ g/mol}} = 1.005 \times 10^{-5}\text{ mol}. NCl=1.005×10−5 mol×3×6.022×1023 atoms/mol=1.82×1019 Cl atomsN_{\ce{Cl}} = 1.005 \times 10^{-5}\text{ mol} \times 3 \times 6.022 \times 10^{23}\text{ atoms/mol} = 1.82 \times 10^{19}\text{ Cl atoms}.

03

An environmental standard allows a maximum of 5.00 ppb5.00\text{ ppb} by mass of vinyl chloride (CX2HX3Cl\ce{C2H3Cl}, molar mass =62.50 g/mol= 62.50\text{ g/mol}, where 1.00 ppb=1.00  μg/L1.00\text{ ppb} = 1.00\;\mu\text{g/L}). How many liters of water at this limit would contain exactly 1.00×10171.00 \times 10^{17} chlorine atoms?

Answer

2.08 L2.08\text{ L}. Key steps: nCl=1.00×1017 atoms6.022×1023 atoms/mol=1.661×10−7 moln_{\ce{Cl}} = \frac{1.00 \times 10^{17}\text{ atoms}}{6.022 \times 10^{23}\text{ atoms/mol}} = 1.661 \times 10^{-7}\text{ mol}. Since each CX2HX3Cl\ce{C2H3Cl} has 1 Cl1\text{ Cl}, ncompound=1.661×10−7 moln_{\text{compound}} = 1.661 \times 10^{-7}\text{ mol}. Mass =1.661×10−7 mol×62.50 g/mol=1.038×10−5 g=10.38  μg= 1.661 \times 10^{-7}\text{ mol} \times 62.50\text{ g/mol} = 1.038 \times 10^{-5}\text{ g} = 10.38\;\mu\text{g}. Volume =10.38  μg5.00  μg/L=2.08 L= \frac{10.38\;\mu\text{g}}{5.00\;\mu\text{g/L}} = 2.08\text{ L}.

Loading workspace…