Resources
In an analytical chemistry laboratory, a student is tasked with standardizing an unknown hydrated barium hydroxide solution, , by titrating against standardized sulfamic acid (, a monoprotic acid that donates one proton to yield the sulfamate anion, ). (a) Write the chemical formula of the neutral ionic salt formed when barium ions, , combine with sulfamate ions, . (b) A aliquot of the barium hydroxide solution requires exactly of sulfamic acid to reach the phenolphthalein endpoint. Write the balanced neutralization molecular equation. (c) Calculate the molarity of the barium hydroxide solution.
Answer and steps
Final answer
(a) , (b) , (c)
Steps
Part (a): Determining the Formula of the Ionic Salt
An ionic compound must be electrically neutral, meaning the sum of positive charges from the cations must balance the sum of negative charges from the anions.
-
Identify the charges of the ions:
- Barium cation: (charge )
- Sulfamate anion: (charge )
- Balance the total charges: To cancel out the charge of a single barium ion, two sulfamate ions are required:
- Write the formula: Because the sulfamate ion is a polyatomic ion, enclose it in parentheses before adding the subscript:
Part (b): Balanced Neutralization Equation
Sulfamic acid () is a monoprotic acid that donates one proton () per molecule, while barium hydroxide () is a diprotic base providing two hydroxide ions ().
- Combine reactants and products:
-
Balance the equation:
- Two hydroxide ions () require two protons () to form two water molecules ().
- This requires moles of for every mole of :
Part (c): Calculating the Molarity of the Barium Hydroxide Solution
- Calculate moles of sulfamic acid used:
- Determine moles of using stoichiometry: From the balanced equation, the stoichiometric ratio is :
- Calculate the molarity of :
Typical errors
01 The student forgets that barium hydroxide provides two hydroxide ions and treats the acid-base titration as a 1:1 molar reaction, doubling the calculated molarity of barium hydroxide.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
According to your balanced equation, reacts with . You need to divide the moles of acid by rather than assuming a stoichiometric ratio.
- Step 5Correct
Your division by the aliquot volume was executed properly, but the result is twice the correct value due to the carried-over mole quantity.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly derived the chemical formula of barium sulfamate by balancing ion charges.
You wrote and balanced the complete neutralization equation with the correct stoichiometric coefficients.
You calculated the exact number of moles of standardized acid titrant delivered.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed a equivalence between acid and base moles during the titration calculation instead of checking the stoichiometric coefficients from your balanced neutralization equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Stoichiometric Mole Factor
In titrations where reactants do not react in a ratio, .
Always explicitly write out the dimensional analysis conversion factor with stoichiometric coefficients from the balanced equation before calculating concentration.
CORRECTED PATH
ACEpath Teacher's Demonstration02 The student inverts the stoichiometric ratio and multiplies the moles of sulfamic acid by 2 instead of dividing by 2 to find the moles of barium hydroxide.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You multiplied by the coefficient of instead of dividing by it. According to the balanced equation, of reacts with of , meaning there are half as many moles of base as acid.
- Step 5Correct
Your molarity calculation method was mathematically correct, but the numerical answer carried over the stoichiometric error from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly deduced the neutral chemical formula using ionic charges.
You wrote and balanced the complete neutralization equation with correct stoichiometry.
You correctly calculated the amount of titrant in moles using volume and molarity.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the stoichiometric coefficient of 2 with multiplication rather than setting up dimensional analysis with units to cancel out the acid moles.
REASONING PATH
Your ACEpath teacher’s suggested approach- Use Dimensional Analysis with Units
Always write mole ratios with units in numerator and denominator: .
Set up so that cancels out.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the stoichiometric conversion: .
Divide by the aliquot volume: .
03 The student ignores the 2+ charge of barium and writes a 1:1 salt formula, which propagates into an unadjusted 1:1 chemical equation and an incorrect concentration of 0.1296 M.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Barium forms a divalent cation , while the sulfamate ion carries a single negative charge . To achieve electrical neutrality, two sulfamate anions are required for each barium cation.
- Step 2Correct
Because supplies two hydroxide ions () and sulfamic acid is monoprotic, two moles of acid are required to neutralize one mole of base and form the neutral salt .
- Step 3
- Step 4Correct
Your arithmetic and concentration formula are carried out properly, but because of the ratio assumed from Step 2, the moles of were not divided by .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total moles of standard acid titrant from its molarity and volume.
You correctly applied the definition of molarity by dividing moles of solute by the aliquot volume in liters.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWriting a ratio of to instead of balancing the cation charge with two anions.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the oxidation state / ionic charge of the alkaline earth metal cation when combining it with an unfamiliar polyatomic anion, which led to an incorrect salt formula and an unbalanced stoichiometric ratio in the neutralization equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Verify Charge Neutrality
An ionic compound must have a net charge of zero: .
Always write the explicit charges of both ions first (e.g., and ), and use subscripts with parentheses around polyatomic ions when more than one is needed.
- Check Acid-Base Equivalence Ratio
at the equivalence point.
Identify the proticity of the acid and the base: a diprotic base like yields per formula unit, so it requires moles of a monoprotic acid.
CORRECTED PATH
ACEpath Teacher's DemonstrationBarium ion is and sulfamate ion is , giving the formula .
Write the balanced neutralization equation: .
Use the stoichiometric ratio to find moles of base: .
Calculate molarity: .
(a) , (b) , (c)
Lock it in
In an acid-base titration, when can you directly set ?
Only when the stoichiometric coefficient ratio between acid and base in the balanced equation is strictly .
Similar question
A sample of solution is titrated to the equivalence point with of . Write the balanced molecular equation and calculate the molarity of the solution.
Answer
. Moles of . Moles of . Molarity .
A student standardizes a sodium hydroxide solution () using diprotic oxalic acid dihydrate (, molar mass ). If of oxalic acid dihydrate requires of solution to reach the endpoint, what is the concentration of the solution?
Answer
Reaction: . Moles of acid . Moles of . Molarity .
A aliquot of phosphoric acid, , is completely neutralized by of to form a precipitate of . Calculate the molarity of the phosphoric acid solution.
Answer
Balanced equation: . Moles of . Moles of . Molarity .