Resources

An environmental chemist tests a model proposing that adding solid sodium hydroxide to an industrial buffer solution (0.200 M CH3COOH0.200\text{ M}\text{ CH}_3\text{COOH} and 0.200 M CH3COONa0.200\text{ M}\text{ CH}_3\text{COONa}, Ka=1.80×10−5K_a = 1.80 \times 10^{-5}) maintains pH\text{pH} stability according to the ideal Henderson-Hasselbalch equation until the buffering capacity is completely exhausted. To a 500.0 mL500.0\text{ mL} aliquot of this buffer, the chemist adds 0.0800 mol0.0800\text{ mol} of solid NaOH\text{NaOH} (assume negligible volume change). Calculate: (a) the predicted pH\text{pH} using the stoichiometric neutralization followed by the Henderson-Hasselbalch buffer model, (b) the ionic strength I=12∑cizi2I = \frac{1}{2}\sum c_i z_i^2 of the resulting solution, and (c) evaluate whether the ideal activity coefficient model (γi≈1.0\gamma_i \approx 1.0) is valid under these ionic conditions.

Answer and steps

Final answer

(a) Initial moles: nCH3COOH=0.100 moln_{\text{CH}_3\text{COOH}} = 0.100\text{ mol}, nCH3COO−=0.100 moln_{\text{CH}_3\text{COO}^-} = 0.100\text{ mol}. After reaction with 0.0800 mol OH−0.0800\text{ mol}\text{ OH}^-, remaining nCH3COOH=0.0200 moln_{\text{CH}_3\text{COOH}} = 0.0200\text{ mol} and total nCH3COO−=0.180 moln_{\text{CH}_3\text{COO}^-} = 0.180\text{ mol}. In 0.500 L0.500\text{ L}, [CH3COOH]=0.0400 M[\text{CH}_3\text{COOH}] = 0.0400\text{ M} and [CH3COO−]=0.360 M[\text{CH}_3\text{COO}^-] = 0.360\text{ M}. Model prediction: pH=pKa+log⁡10([CH3COO−][CH3COOH])=4.745+log⁡10(9.00)=4.745+0.954=5.70\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\text{CH}_3\text{COO}^-]}{[\text{CH}_3\text{COOH}]}\right) = 4.745 + \log_{10}(9.00) = 4.745 + 0.954 = 5.70. (b) Post-neutralization, [extNa+]=0.100+0.08000.500=0.360 M[ ext{Na}^+] = \frac{0.100 + 0.0800}{0.500} = 0.360\text{ M} and [extCH3COO−]=0.360 M[ ext{CH}_3\text{COO}^-] = 0.360\text{ M}. Ionic strength I=12[(0.360)(+1)2+(0.360)(−1)2]=0.360 MI = \frac{1}{2}[(0.360)(+1)^2 + (0.360)(-1)^2] = 0.360\text{ M}. (c) The ideal model (γi≈1.0\gamma_i \approx 1.0) is invalid because at I=0.360 MI = 0.360\text{ M}, electrostatic ion-ion screening significantly depresses activity coefficients (Debye-Hückel limiting law breaks down above I≈0.01 MI \approx 0.01\text{ M}).

Steps

Part (a): Predicted pH\text{pH} using the Henderson-Hasselbalch Model

  1. Calculate the initial moles of the buffer components: The initial volume of the buffer is V=500.0 mL=0.5000 LV = 500.0\text{ mL} = 0.5000\text{ L}. nCHX3COOH, initial=0.200 M⋅0.5000 L=0.100 moln_{\ce{CH3COOH}\text{, initial}} = 0.200\text{ M} \cdot 0.5000\text{ L} = 0.100\text{ mol} nCHX3COOX−, initial=0.200 M⋅0.5000 L=0.100 moln_{\ce{CH3COO-}\text{, initial}} = 0.200\text{ M} \cdot 0.5000\text{ L} = 0.100\text{ mol}
  2. Account for stoichiometric neutralization: The added strong base reacts completely with the weak acid: CHX3COOH+OHX−→CHX3COOX−+HX2O\ce{CH3COOH + OH- -> CH3COO- + H2O} Adding 0.0800 mol0.0800\text{ mol} of NaOH\ce{NaOH} consumes an equivalent amount of CHX3COOH\ce{CH3COOH} and generates an equal amount of conjugate base CHX3COOX−\ce{CH3COO-}: nCHX3COOH=0.100 mol−0.0800 mol=0.0200 moln_{\ce{CH3COOH}} = 0.100\text{ mol} - 0.0800\text{ mol} = 0.0200\text{ mol} nCHX3COOX−=0.100 mol+0.0800 mol=0.180 moln_{\ce{CH3COO-}} = 0.100\text{ mol} + 0.0800\text{ mol} = 0.180\text{ mol}
  3. Determine the equilibrium concentrations: Since volume change is negligible, the total volume remains 0.5000 L0.5000\text{ L}: [CHX3COOH]=0.0200 mol0.5000 L=0.0400 M[\ce{CH3COOH}] = \frac{0.0200\text{ mol}}{0.5000\text{ L}} = 0.0400\text{ M} [CHX3COOX−]=0.180 mol0.5000 L=0.360 M[\ce{CH3COO-}] = \frac{0.180\text{ mol}}{0.5000\text{ L}} = 0.360\text{ M}
  4. Calculate pH\text{pH} using the Henderson-Hasselbalch equation: pKa=−log⁡10(Ka)=−log⁡10(1.80×10−5)≈4.745\text{p}K_a = -\log_{10}(K_a) = -\log_{10}(1.80 \times 10^{-5}) \approx 4.745 pH=pKa+log⁡10([CHX3COOX−][CHX3COOH])\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\ce{CH3COO-}]}{[\ce{CH3COOH}]}\right) pH=4.745+log⁡10(0.360 M0.0400 M)=4.745+log⁡10(9.00)\text{pH} = 4.745 + \log_{10}\left(\frac{0.360\text{ M}}{0.0400\text{ M}}\right) = 4.745 + \log_{10}(9.00) pH=4.745+0.954=5.70\text{pH} = 4.745 + 0.954 = 5.70

Part (b): Calculation of Ionic Strength (II)

  1. Identify all ionic species present in solution:

    • NaX+\ce{Na+} ions come from both the initial CHX3COONa\ce{CH3COONa} and the added NaOH\ce{NaOH}: nNaX+=0.100 mol+0.0800 mol=0.180 moln_{\ce{Na+}} = 0.100\text{ mol} + 0.0800\text{ mol} = 0.180\text{ mol} [NaX+]=0.180 mol0.5000 L=0.360 M,zNaX+=+1[\ce{Na+}] = \frac{0.180\text{ mol}}{0.5000\text{ L}} = 0.360\text{ M}, \quad z_{\ce{Na+}} = +1
    • CHX3COOX−\ce{CH3COO-} ions: [CHX3COOX−]=0.360 M,zCHX3COOX−=−1[\ce{CH3COO-}] = 0.360\text{ M}, \quad z_{\ce{CH3COO-}} = -1
    • The un-ionized CHX3COOH\ce{CH3COOH} is neutral (z=0z = 0) and does not contribute to ionic strength.
  2. Compute ionic strength: I=12∑cizi2=12[(0.360 M)(+1)2+(0.360 M)(−1)2]I = \frac{1}{2}\sum c_i z_i^2 = \frac{1}{2}\left[(0.360\text{ M})(+1)^2 + (0.360\text{ M})(-1)^2\right] I=12(0.360+0.360)=0.360 MI = \frac{1}{2}(0.360 + 0.360) = 0.360\text{ M}

Part (c): Evaluation of the Ideal Activity Coefficient Model

  • Criterion for ideality: The assumption that activity coefficients equal unity (γi≈1.0\gamma_i \approx 1.0) applies strictly in extremely dilute solutions, typically where ionic strength I≤0.01 MI \le 0.01\text{ M} (the domain governed by the simple Debye-Hückel limiting law).
  • Evaluation: At I=0.360 MI = 0.360\text{ M}, electrostatic shielding and ion-ion interactions in solution are pronounced. This significantly lowers the activity coefficients of ionic species below 1.01.0.
  • Conclusion: The ideal activity model (γi≈1.0\gamma_i \approx 1.0) is invalid under these conditions; an extended activity model (such as the Davies equation or Debye-Hückel extended equation) is required to accurately predict real chemical behavior and true thermodynamic equilibrium pH\text{pH}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that adding a strong base converts weak acid into conjugate base, omitting the increase in acetate moles and treating its amount as unchanged.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(CH3COOH)=0.200×0.5000=0.100 moln(\text{CH}_3\text{COOH}) = 0.200 \times 0.5000 = 0.100\text{ mol}   ⟹  \implies n(CH3COO−)=0.200×0.5000=0.100 moln(\text{CH}_3\text{COO}^-) = 0.200 \times 0.5000 = 0.100\text{ mol}   ⟹  \implies n(CH3COOH)after=0.100−0.0800=0.0200 moln(\text{CH}_3\text{COOH})_{\text{after}} = 0.100 - 0.0800 = 0.0200\text{ mol}   ⟹  \implies n(CH3COO−)after=0.100 moln(\text{CH}_3\text{COO}^-)_{\text{after}} = 0.100\text{ mol}

    Correct

    n(CH3COO−)after=ninitial+nOH− added=0.100 mol+0.0800 mol=0.180 moln(\text{CH}_3\text{COO}^-)_{\text{after}} = n_{\text{initial}} + n_{\text{OH}^-\text{ added}} = 0.100\text{ mol} + 0.0800\text{ mol} = 0.180\text{ mol}

    When strong base is added to a buffer, each mole of OHX−\ce{OH-} that consumes CHX3COOH\ce{CH3COOH} produces an equivalent mole of conjugate base CHX3COOX−\ce{CH3COO-}. You subtracted the moles from the weak acid correctly, but you treated the conjugate base moles as unchanged instead of adding 0.0800 mol0.0800\text{ mol}.

  2. Step 2

    pKa=−log⁡(1.80×10−5)=4.745\text{p}K_a = -\log(1.80 \times 10^{-5}) = 4.745   ⟹  \implies pH=4.745+log⁡(0.1000.0200)=4.745+0.699=5.44\text{pH} = 4.745 + \log\left(\frac{0.100}{0.0200}\right) = 4.745 + 0.699 = 5.44

    Correct

    pH=4.745+log⁡10(0.180 mol0.0200 mol)=4.745+log⁡10(9.00)=4.745+0.954=5.70\text{pH} = 4.745 + \log_{10}\left(\frac{0.180\text{ mol}}{0.0200\text{ mol}}\right) = 4.745 + \log_{10}(9.00) = 4.745 + 0.954 = 5.70

    You applied the Henderson-Hasselbalch equation and calculated pKa\text{p}K_a accurately, but the resulting pH\text{pH} was skewed by using 0.100 mol0.100\text{ mol} instead of 0.180 mol0.180\text{ mol} for acetate.

  3. Step 3

    Total n(Na+)=0.100+0.0800=0.180 mol\text{Total } n(\text{Na}^+) = 0.100 + 0.0800 = 0.180\text{ mol}   ⟹  \implies [Na+]=0.1800.5000=0.360 M[\text{Na}^+] = \frac{0.180}{0.5000} = 0.360\text{ M}   ⟹  \implies [CH3COO−]=0.1800.5000=0.360 M[\text{CH}_3\text{COO}^-] = \frac{0.180}{0.5000} = 0.360\text{ M}   ⟹  \implies I=0.5×(0.360×12+0.360×12)=0.360 MI = 0.5 \times (0.360 \times 1^2 + 0.360 \times 1^2) = 0.360\text{ M}

  4. Step 4

    The ideal activity coefficient model is not valid because I=0.360 MI = 0.360\text{ M} is far too high for ideal behavior where II should be below 0.01 M0.01\text{ M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial moles of both buffer components from their molarities and volume.

You correctly accounted for the neutralization stoichiometry for the weak acid.

You accurately identified all ionic species, computed the ionic strength, and correctly evaluated the validity of the activity coefficient model.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Buffer stoichiometry omission

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the addition of strong base as only consuming the weak acid, overlooking that the neutralization reaction quantitatively converts the weak acid into its conjugate base.

REASONING PATH
Your ACEpath teacher’s suggested approach
Buffer Stoichiometry Principle
  • In the reaction HA+OHX−→AX−+HX2O\ce{HA + OH- -> A- + H2O}, every mole of strong base consumed reduces moles of HA\ce{HA} by Δn\Delta n and increases moles of AX−\ce{A-} by Δn\Delta n.

  • Always set up an ICF (Initial, Change, Final) mole table when adding a strong acid or strong base to a buffer solution.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate conjugate base moles after neutralization: n(CH3COO−)=0.100 mol+0.0800 mol=0.180 moln(\text{CH}_3\text{COO}^-) = 0.100\text{ mol} + 0.0800\text{ mol} = 0.180\text{ mol}.

  2. Substitute both revised amounts into the Henderson-Hasselbalch equation: pH=4.745+log⁡10(0.1800.0200)=4.745+log⁡10(9.00)=4.745+0.954=5.70\text{pH} = 4.745 + \log_{10}\left(\frac{0.180}{0.0200}\right) = 4.745 + \log_{10}(9.00) = 4.745 + 0.954 = 5.70.

Final answer

(a) pH=5.70\text{pH} = 5.70; (b) I=0.360 MI = 0.360\text{ M}; (c) The ideal activity coefficient model is invalid.

NEXT STEPS
Final Takeaways from Your Teacher
  • Use an explicit Initial-Change-Final (ICF) mole table whenever strong acid or strong base is added to a buffer.

  • Verify that mass balance is conserved: total moles of acetate species n(CHX3COOH)+n(CHX3COOX−)n(\ce{CH3COOH}) + n(\ce{CH3COO-}) must remain constant throughout the neutralization.

OverviewACEpath Teacher's Diagnosis

02 The student omits the sodium ions contributed by the added sodium hydroxide when computing the ionic strength, using only the initial buffer salt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(CHX3COOH\ce{CH3COOH}) = 0.200 ×\times 0.5000 = 0.100 mol\text{ mol}   ⟹  \implies n(CHX3COOX−\ce{CH3COO-}) = 0.200 ×\times 0.5000 = 0.100 mol\text{ mol}   ⟹  \implies n(CHX3COOH\ce{CH3COOH}){after\text{after}} = 0.100 - 0.0800 = 0.0200 mol\text{ mol}   ⟹  \implies n(CHX3COOX−\ce{CH3COO-}){after\text{after}} = 0.100 + 0.0800 = 0.180 mol\text{ mol}   ⟹  \implies p\text{p}K_a = -\log(1.80 ×\times 10^{-5}) = 4.745   ⟹  \implies pH\text{pH} = 4.745 + \log(0.180 / 0.0200) = 4.745 + 0.954 = 5.70

  2. Step 2

    n(NaX+\ce{Na+}) = 0.100 mol\text{ mol}   ⟹  \implies [NaX+\ce{Na+}] = 0.100 / 0.5000 = 0.200 M\text{ M}   ⟹  \implies [CHX3COOX−\ce{CH3COO-}] = 0.180 / 0.5000 = 0.360 M\text{ M}   ⟹  \implies I = 0.5 ×\times (0.200 ×\times 1^2 + 0.360 ×\times 1^2) = 0.280 M\text{ M}

    Correct

    n_{NaX+\ce{Na+}} = 0.100 mol\text{ mol} + 0.0800 mol\text{ mol} = 0.180 mol\text{ mol}   ⟹  \implies [NaX+\ce{Na+}] = 0.360 M\text{ M}   ⟹  \implies I = 12\frac{1}{2}[(0.360)(1)^2 + (0.360)(1)^2] = 0.360 M\text{ M}_

    You only counted the NaX+\ce{Na+} ions from the initial CHX3COONa\ce{CH3COONa} salt (0.100 mol0.100\text{ mol}). The 0.0800 mol0.0800\text{ mol} of added NaOH\ce{NaOH} also completely dissociates into NaX+\ce{Na+}, giving a total of 0.180 mol0.180\text{ mol} of NaX+\ce{Na+} and [NaX+]=0.360 M[\ce{Na+}] = 0.360\text{ M}.

  3. Step 3

    The ideal model is not valid because an ionic strength of \text{The ideal model is not valid because an ionic strength of } 0.280$\text{ M} is much greater than the dilute limit where activity coefficients equal 1.\text{ is much greater than the dilute limit where activity coefficients equal 1.}

    Correct

    The ideal model is invalid because at \text{The ideal model is invalid because at } I = 0.360\text{ M}$$\text{ (well above the dilute limit } I ≤\le 0.01\text{ M}$$\text{), interionic electrostatic screening significantly depresses } γ\gamma_i < 1.0.

    Your conceptual evaluation and reasoning are completely sound, though the numerical ionic strength of 0.280 M0.280\text{ M} was carried over from your calculation error in Part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately tracked the stoichiometric neutralization between acetic acid and added hydroxide.

You correctly used the Henderson-Hasselbalch equation to calculate the buffer pH.

You correctly identified that high ionic strength invalidates the ideal assumption of unity activity coefficients.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Spectator Ions from Added Reagents

You set n(NaX+)=0.100 moln(\ce{Na+}) = 0.100\text{ mol} from the buffer salt alone and overlooked the 0.0800 mol0.0800\text{ mol} of NaX+\ce{Na+} provided by the solid NaOH\ce{NaOH}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Focusing solely on the net ionic neutralization (CHX3COOH+OHX−→CHX3COOX−+HX2O\ce{CH3COOH + OH- -> CH3COO- + H2O}) can cause spectator counterions (like NaX+\ce{Na+} from strong electrolytes) to be forgotten when tallying species for ionic strength.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inventory All Ionic Species
  • Every fully soluble salt and strong base/acid contributes counterions to the solution, regardless of whether they participate directly in acid-base equilibria.

  • Always list each individual cation and anion separately from every source added before applying I=12∑cizi2I = \frac{1}{2}\sum c_i z_i^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find total moles of NaX+\ce{Na+}: nNaX+=nNaX+,initial+nNaOH,added=0.100 mol+0.0800 mol=0.180 moln_{\ce{Na+}} = n_{\ce{Na+, initial}} + n_{\ce{NaOH, added}} = 0.100\text{ mol} + 0.0800\text{ mol} = 0.180\text{ mol}.

  2. Compute [NaX+][\ce{Na+}]: [NaX+]=0.180 mol0.5000 L=0.360 M[\ce{Na+}] = \frac{0.180\text{ mol}}{0.5000\text{ L}} = 0.360\text{ M}.

  3. Compute ionic strength: I=12([NaX+](+1)2+[CHX3COOX−](−1)2)=12(0.360+0.360)=0.360 MI = \frac{1}{2}\left([\ce{Na+}](+1)^2 + [\ce{CH3COO-}](-1)^2\right) = \frac{1}{2}(0.360 + 0.360) = 0.360\text{ M}.

Final answer

(a) pH=5.70\text{pH} = 5.70; (b) I=0.360 MI = 0.360\text{ M}; (c) The ideal model is invalid because I=0.360 M≫0.01 MI = 0.360\text{ M} \gg 0.01\text{ M}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up the ionic strength summation, write a complete ion inventory table listing the source and moles of every cation and anion.

  • Double-check that strong base or strong acid counterions are explicitly included in the total cation or anion concentrations.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the moderate numerical value of ionic strength as dilute, incorrectly concluding that the ideal model remains valid.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(CH3COOH)=0.200×0.5000=0.100 mol  ⟹  n(CH3COO−)=0.200×0.5000=0.100 mol  ⟹  n(CH3COOH)after=0.100−0.0800=0.0200 mol  ⟹  n(CH3COO−)after=0.100+0.0800=0.180 mol  ⟹  pKa=−log⁡(1.80×10−5)=4.745  ⟹  pH=4.745+log⁡(0.180/0.0200)=4.745+0.954=5.70n(\text{CH}_3\text{COOH}) = 0.200 \times 0.5000 = 0.100\text{ mol} \implies n(\text{CH}_3\text{COO}^-) = 0.200 \times 0.5000 = 0.100\text{ mol} \implies n(\text{CH}_3\text{COOH})_{\text{after}} = 0.100 - 0.0800 = 0.0200\text{ mol} \implies n(\text{CH}_3\text{COO}^-)_{\text{after}} = 0.100 + 0.0800 = 0.180\text{ mol} \implies \text{p}K_a = -\log(1.80 \times 10^{-5}) = 4.745 \implies \text{pH} = 4.745 + \log(0.180/0.0200) = 4.745 + 0.954 = 5.70

  2. Step 2

    Total \text{Total } n(Na\text{Na}^+) = 0.100 + 0.0800 = 0.180 mol\text{ mol}   ⟹  \implies [Na\text{Na}^+] = 0.180/0.5000 = 0.360 M\text{ M}   ⟹  \implies [CH\text{CH}3COO\text{COO}^-] = 0.180/0.5000 = 0.360 M\text{ M}   ⟹  \implies I = 0.5 ×\times (0.360 ×\times 1^2 + 0.360 ×\times 1^2) = 0.360 M\text{ M}

  3. Step 3

    because the ionic strength of \text{because the ionic strength of } 0.360 M is less than \text{ M is less than } 1 M, so the solution is dilute enough for \text{ M, so the solution is dilute enough for } γ\gammai ≈\approx 1.0.

    Correct

    The ideal model (γi≈1.0\gamma_i \approx 1.0) is invalid because ideality strictly requires I≤0.01 MI \le 0.01\text{ M}; at I=0.360 MI = 0.360\text{ M}, electrostatic shielding causes γi\gamma_i to deviate significantly below 1.01.0.

    You concluded that I=0.360 MI = 0.360\text{ M} satisfies ideality because it is below 1 M1\text{ M}. In electrolyte solutions, activity coefficients deviate substantially from 1.01.0 at ionic strengths well above 0.01 M0.01\text{ M}, meaning the ideal model is invalid.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the stoichiometric consumption and formation of buffer species upon adding strong base.

You applied the Henderson-Hasselbalch equation accurately to find the predicted buffer pH.

You correctly identified all ionic contributors and evaluated the solution's ionic strength.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Criterion Misapplication for Electrolyte Ideality

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the general chemistry threshold for moderate solution molarity (<1 M< 1\text{ M}) with the much lower ionic strength limit (I≤0.01 MI \le 0.01\text{ M}) required for activity coefficients to remain close to unity. In electrolyte solutions, long-range electrostatic attractions create ionic atmospheres that noticeably screen ion activities even at tenths of a molar.

REASONING PATH
Your ACEpath teacher’s suggested approach
Electrolyte Ideality Limit
  • The assumption γi≈1.0\gamma_i \approx 1.0 is only valid in extremely dilute ionic solutions, typically where ionic strength I≤0.01 MI \le 0.01\text{ M} (or at most I≤10−3 to 10−2 MI \le 10^{-3}\text{ to } 10^{-2}\text{ M}).

  • Always compare calculated ionic strength against I≈0.01 MI \approx 0.01\text{ M}, rather than comparing total concentration against 1 M1\text{ M}.

Impact of Ionic Atmosphere
  • When I>0.01 MI > 0.01\text{ M}, interionic electrostatic interactions significantly depress activity coefficients below 1.01.0, requiring non-ideal models such as the Debye-Hückel extended equation or Davies equation.

  • State that the ideal model fails because electrostatic shielding noticeably reduces ion activities at I=0.360 MI = 0.360\text{ M}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that the ideal activity coefficient approximation γi≈1.0\gamma_i \approx 1.0 applies only when ionic strength is very low, typically I≤0.01 MI \le 0.01\text{ M}.

  2. Compare the calculated ionic strength: I=0.360 M>0.01 MI = 0.360\text{ M} > 0.01\text{ M}.

  3. Conclude that substantial electrostatic interactions lower ionic activity coefficients below unity, so the ideal model is invalid.

Final answer

The ideal model is invalid because at I=0.360 MI = 0.360\text{ M}, electrostatic shielding significantly lowers γi\gamma_i below 1.01.0 (II exceeds the dilute threshold of 0.01 M0.01\text{ M}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the quantitative boundary for electrolyte ideality (I≤0.01 MI \le 0.01\text{ M}) where the Debye-Hückel limiting law applies.

  • Practice distinguishing between non-electrolyte dilute behavior (where c<0.1 Mc < 0.1\text{ M} or <1 M< 1\text{ M} often behaves ideally) and ionic electrolyte behavior (where long-range Coulombic forces break ideality above 0.01 M0.01\text{ M}).

Lock it in

Similar question

01

A 1.00 L1.00\text{ L} buffer contains 0.250 mol0.250\text{ mol} of CHX3COOH\ce{CH3COOH} and 0.250 mol0.250\text{ mol} of CHX3COONa\ce{CH3COONa} (pKa=4.75\text{p}K_a = 4.75). What is the resulting pH\text{pH} after adding 0.050 mol0.050\text{ mol} of solid NaOH\ce{NaOH} (assume no volume change)?

Answer

pH=4.93\text{pH} = 4.93. Key steps: n(CHX3COOH)=0.250−0.050=0.200 moln(\ce{CH3COOH}) = 0.250 - 0.050 = 0.200\text{ mol}; n(CHX3COOX−)=0.250+0.050=0.300 moln(\ce{CH3COO-}) = 0.250 + 0.050 = 0.300\text{ mol}. Then pH=4.75+log⁡10(0.300/0.200)=4.75+0.176=4.93\text{pH} = 4.75 + \log_{10}(0.300 / 0.200) = 4.75 + 0.176 = 4.93.

02

To 250.0 mL250.0\text{ mL} of a buffer consisting of 0.400 MNHX30.400\text{ M}\ce{ NH3} and 0.400 MNHX4Cl0.400\text{ M}\ce{ NH4Cl} (Kb=1.80×10−5K_b = 1.80 \times 10^{-5} for NHX3\ce{NH3}, so pKa=9.255\text{p}K_a = 9.255), a student adds 0.0200 mol0.0200\text{ mol} of HCl\ce{HCl}. Calculate the new pH\text{pH} of the solution.

Answer

pH=9.08\text{pH} = 9.08. Key steps: Initial moles: n(NHX3)=0.100 moln(\ce{NH3}) = 0.100\text{ mol}, n(NHX4X+)=0.100 moln(\ce{NH4+}) = 0.100\text{ mol}. Addition of HX+\ce{H+} reacts with base: n(NHX3)=0.100−0.0200=0.0800 moln(\ce{NH3}) = 0.100 - 0.0200 = 0.0800\text{ mol}; n(NHX4X+)=0.100+0.0200=0.120 moln(\ce{NH4+}) = 0.100 + 0.0200 = 0.120\text{ mol}. pH=9.255+log⁡10(0.0800/0.120)=9.255−0.176=9.08\text{pH} = 9.255 + \log_{10}(0.0800 / 0.120) = 9.255 - 0.176 = 9.08.

03

A buffer solution contains 0.150 mol0.150\text{ mol} of formic acid (HCOOH\ce{HCOOH}, pKa=3.75\text{p}K_a = 3.75) and 0.100 mol0.100\text{ mol} of sodium formate (HCOONa\ce{HCOONa}) in 500 mL500\text{ mL}. After adding 0.050 mol0.050\text{ mol} of solid NaOH\ce{NaOH}, calculate: (1) the new pH\text{pH}, and (2) the final ionic strength II of the solution.

Answer

(1) pH=3.93\text{pH} = 3.93; (2) I=0.300 MI = 0.300\text{ M}. Key steps: Neutralization: n(HCOOH)=0.150−0.050=0.100 moln(\ce{HCOOH}) = 0.150 - 0.050 = 0.100\text{ mol}; n(HCOOX−)=0.100+0.050=0.150 moln(\ce{HCOO-}) = 0.100 + 0.050 = 0.150\text{ mol}. pH=3.75+log⁡10(0.150/0.100)=3.75+0.176=3.93\text{pH} = 3.75 + \log_{10}(0.150 / 0.100) = 3.75 + 0.176 = 3.93. Total NaX+=0.100+0.050=0.150 mol\ce{Na+} = 0.100 + 0.050 = 0.150\text{ mol}. In 0.500 L0.500\text{ L}, [NaX+]=0.300 M[\ce{Na+}] = 0.300\text{ M} and [HCOOX−]=0.300 M[\ce{HCOO-}] = 0.300\text{ M}. I=12[(0.300)(1)2+(0.300)(−1)2]=0.300 MI = \frac{1}{2}[(0.300)(1)^2 + (0.300)(-1)^2] = 0.300\text{ M}.

Loading workspace…