Resources

An electrochemical cell is assembled using a solid zinc strip (electrode AA, mass =10.00 g= 10.00\text{ g}) immersed in 500.0 mL500.0\text{ mL} of 1.00 M ZnSO4(aq)1.00\text{ M }\text{ZnSO}_4(aq) and a copper strip (electrode BB, mass =10.00 g= 10.00\text{ g}) immersed in 500.0 mL500.0\text{ mL} of 1.00 M CuSO4(aq)1.00\text{ M }\text{CuSO}_4(aq), connected by an external copper wire and a potassium nitrate (KNO3\text{KNO}_3) salt bridge. (a) In terms of electron mobility and bonding type, compare the conduction mechanism operating through the external wire versus the conduction mechanism operating inside the aqueous electrolyte solutions. (b) After the cell delivers a constant current of 0.500 A0.500\text{ A} for exactly 3860 s3860\text{ s}, calculate the final mass of the zinc metallic electrode (MZn=65.38 g/molM_{\text{Zn}} = 65.38\text{ g}/\text{mol}, Faraday's constant F=96485 C/molF = 96485\text{ C}/\text{mol}).

Answer and steps

Final answer

(a) In the external metallic copper wire, conduction occurs via the rapid drift of delocalized valence electrons through the metal lattice without mass transport. In the aqueous electrolytes and ionic salt bridge, conduction occurs via the physical migration of solvated ions (cations K+\text{K}^+, Zn2+\text{Zn}^{2+}, Cu2+\text{Cu}^{2+} toward the cathode; anions NO3−\text{NO}_3^-, SO42−\text{SO}_4^{2-} toward the anode), which involves mass transport. (b) Final mass of zinc electrode =9.35 g= 9.35\text{ g} (loss of 0.654 g0.654\text{ g} of Zn\text{Zn}).

Steps

Part (a): Comparison of Conduction Mechanisms

  1. Conduction in the External Wire (Metallic Conduction):

    • Bonding and Carrier Type: Copper atoms are held together by metallic bonding, consisting of a lattice of positive metal ions surrounded by a "sea" of delocalized valence electrons.
    • Mechanism: When a potential difference exists across the wire, these highly mobile, delocalized electrons drift rapidly through the fixed crystal lattice.
    • Mass Transport: There is no chemical change or net transport of matter along the wire, only the movement of negative electrical charge via electrons.
  2. Conduction in the Aqueous Electrolytes and Salt Bridge (Electrolytic Conduction):

    • Bonding and Carrier Type: The electrolyte solutions and the KNOX3\ce{KNO3} salt bridge consist of dissociated mobile ions held by ion-dipole interactions with water molecules (derived from ionic bonding in solid salts).
    • Mechanism: Charge transport is achieved through the physical migration of hydrated ions under the electric field:
      • Cations (ZnX2+\ce{Zn^2+}, CuX2+\ce{Cu^2+}, and KX+\ce{K+}) migrate toward the cathode (copper electrode).
      • Anions (SOX4X2−\ce{SO4^2-} and NOX3X−\ce{NO3^-}) migrate toward the anode (zinc electrode).
    • Mass Transport: This conduction mechanism directly involves mass transport and chemical reactions (redox reactions) at the electrode surfaces.

Part (b): Final Mass of the Zinc Electrode

  1. Calculate the Total Charge Passed (QQ): Using the relationship between electric current (II) and time (tt): Q=I⋅tQ = I \cdot t Q=0.500 A⋅3860 s=1930 CQ = 0.500\text{ A} \cdot 3860\text{ s} = 1930\text{ C}
  2. Calculate the Moles of Electrons Transferred (nen_e): Using Faraday's constant (F=96485 C/molF = 96485\text{ C/mol}): ne=QF=1930 C96485 C/mol≈0.02000 moln_e = \frac{Q}{F} = \frac{1930\text{ C}}{96485\text{ C/mol}} \approx 0.02000\text{ mol}
  3. Determine the Moles of Zinc Oxidized: Zinc undergoes oxidation at the anode according to the half-reaction: Zn(s)→ZnX2+(aq)+2 eX−\ce{Zn(s) -> Zn^{2+}(aq) + 2e^-} Since each mole of zinc oxidized releases 2 mol2\text{ mol} of electrons: nZn=ne2=0.02000 mol2=0.01000 moln_{\ce{Zn}} = \frac{n_e}{2} = \frac{0.02000\text{ mol}}{2} = 0.01000\text{ mol}
  4. Calculate the Mass of Zinc Lost (Δm\Delta m): Δm=nZn⋅MZn=0.01000 mol⋅65.38 g/mol=0.6538 g≈0.654 g\Delta m = n_{\ce{Zn}} \cdot M_{\ce{Zn}} = 0.01000\text{ mol} \cdot 65.38\text{ g/mol} = 0.6538\text{ g} \approx 0.654\text{ g}
  5. Calculate the Final Mass of the Zinc Electrode: mfinal=minitial−Δmm_{\text{final}} = m_{\text{initial}} - \Delta m mfinal=10.00 g−0.6538 g=9.3462 g≈9.35 gm_{\text{final}} = 10.00\text{ g} - 0.6538\text{ g} = 9.3462\text{ g} \approx 9.35\text{ g}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that zinc forms Zn²⁺ requiring 2 moles of electrons per mole of zinc and instead uses a 1:1 electron-to-metal stoichiometry.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    External wire: conduction is by free delocalized valence electrons moving through metallic bonding. ⟹ Aqueous solution: conduction is by movement of mobile dissolved ions migrating through ionic interactions.

  2. Step 2

    Q=0.500 A×3860 s=1930 C  ⟹  ne=1930/96485=0.0200 molQ = 0.500\text{ A} \times 3860\text{ s} = 1930\text{ C} \implies n_e = 1930 / 96485 = 0.0200\text{ mol}

  3. Step 3

    nZn=0.0200 moln_{\text{Zn}} = 0.0200\text{ mol}

    Correct

    nZn=ne2=0.0200 mol2=0.0100 moln_{\text{Zn}} = \frac{n_e}{2} = \frac{0.0200\text{ mol}}{2} = 0.0100\text{ mol}

    Zinc undergoes oxidation via the half-reaction Zn(s)→ZnX2+(aq)+2 eX−\ce{Zn(s) -> Zn^2+(aq) + 2e^-}. Each mole of zinc oxidized releases 2 mol2\text{ mol} of electrons, so the moles of zinc lost is half the moles of electrons transferred.

  4. Step 4

    Δm=0.0200 mol×65.38 g/mol=1.308 g  ⟹  Final mass=10.00 g−1.308 g=8.69 g\Delta m = 0.0200\text{ mol} \times 65.38\text{ g/mol} = 1.308\text{ g} \implies \text{Final mass} = 10.00\text{ g} - 1.308\text{ g} = 8.69\text{ g}

    Correct

    Δm=0.0100 mol×65.38 g/mol=0.654 g  ⟹  mfinal=10.00 g−0.654 g=9.35 g\Delta m = 0.0100\text{ mol} \times 65.38\text{ g/mol} = 0.654\text{ g} \implies m_{\text{final}} = 10.00\text{ g} - 0.654\text{ g} = 9.35\text{ g}

    Your subtraction and mass calculation logic were sound, but the numerical result was affected by using double the actual amount of consumed zinc.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly distinguished between electronic conduction in the metal and ionic conduction in solution.

You correctly calculated the total charge passed using Q=I⋅tQ = I \cdot t.

You correctly converted electrical charge to moles of electrons using Faraday's constant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometry error in half-cell reaction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed a 1:11:1 stoichiometric ratio between electrons transferred and metal atoms oxidized, forgetting to balance the half-reaction with the +2+2 oxidation state of the zinc ion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the balanced half-reaction first
  • For any metal undergoing oxidation or reduction, write the balanced half-reaction M(s)→MXn+(aq)+n eX−\ce{M(s) -> M^{n+}(aq) + n e^-} before relating nen_e to nmetaln_{\text{metal}}.

  • Always determine the cation's oxidation state (nn) and divide the moles of electrons by nn to find the moles of metal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the oxidation half-reaction at the anode: Zn(s)→ZnX2+(aq)+2 eX−\ce{Zn(s) -> Zn^2+(aq) + 2e^-}.

  2. Calculate moles of zinc reacted: nZn=ne2=0.0200 mol2=0.0100 moln_{\text{Zn}} = \frac{n_e}{2} = \frac{0.0200\text{ mol}}{2} = 0.0100\text{ mol}.

  3. Calculate the mass of zinc oxidized: Δm=0.0100 mol×65.38 g/mol=0.6538 g\Delta m = 0.0100\text{ mol} \times 65.38\text{ g/mol} = 0.6538\text{ g}.

  4. Subtract the lost mass from the initial electrode mass: mfinal=10.00 g−0.6538 g=9.3462 g≈9.35 gm_{\text{final}} = 10.00\text{ g} - 0.6538\text{ g} = 9.3462\text{ g} \approx 9.35\text{ g}.

Final answer

9.35 g9.35\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the balanced oxidation or reduction half-reaction explicitly before doing Faraday calculations.

  • Double-check the common oxidation states of transition metals (e.g., ZnX2+\ce{Zn^2+}, CuX2+\ce{Cu^2+}, AgX+\ce{Ag+}, AlX3+\ce{Al^3+}) to verify the number of electrons transferred per metal atom.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the anode and cathode reactions, adding the mass change as electrodeposition rather than subtracting mass lost by oxidation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    External wire: delocalized electron sea conducts electricity via metallic bonding. \newline Aqueous solution: mobile hydrated ions conduct charge through electrolytic migration.

  2. Step 2

    Q=0.500 A×3860 s=1930 C  ⟹  ne=1930 C/96485 C/mol=0.0200 molQ = 0.500\text{ A} \times 3860\text{ s} = 1930\text{ C} \implies n_e = 1930\text{ C} / 96485\text{ C/mol} = 0.0200\text{ mol}

  3. Step 3

    Zn2++2e−⟶Zn  ⟹  nZn=0.0200/2=0.0100 mol  ⟹  mZn=0.0100 mol×65.38 g/mol=0.654 g\text{Zn}^{2+} + 2e^- \longrightarrow \text{Zn} \implies n_{\text{Zn}} = 0.0200 / 2 = 0.0100\text{ mol} \implies m_{\text{Zn}} = 0.0100\text{ mol} \times 65.38\text{ g/mol} = 0.654\text{ g}

    Correct

    Zn(s)⟶Zn2+(aq)+2e−  ⟹  nZn, oxidized=0.0200 mol2=0.0100 mol  ⟹  Δm=0.654 g\text{Zn}(s) \longrightarrow \text{Zn}^{2+}(aq) + 2e^- \implies n_{\text{Zn, oxidized}} = \frac{0.0200\text{ mol}}{2} = 0.0100\text{ mol} \implies \Delta m = 0.654\text{ g} (mass lost)

    Zinc has a more negative standard reduction potential than copper, so the zinc electrode serves as the anode where oxidation occurs: Zn(s)⟶Zn2+(aq)+2e−\text{Zn}(s) \longrightarrow \text{Zn}^{2+}(aq) + 2e^-. Zinc dissolves into solution rather than depositing.

  4. Step 4

    Final mass=10.00 g+0.654 g=10.65 g\text{Final mass} = 10.00\text{ g} + 0.654\text{ g} = 10.65\text{ g}

    Correct

    mfinal=minitial−Δm=10.00 g−0.654 g=9.35 gm_{\text{final}} = m_{\text{initial}} - \Delta m = 10.00\text{ g} - 0.654\text{ g} = 9.35\text{ g}

    Because zinc was oxidized and dissolved, the mass of the reacted zinc must be subtracted from the initial electrode mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly distinguished electron sea conduction in metals from ion migration in aqueous electrolytes.

You correctly calculated the total charge passed using Q=I⋅tQ = I \cdot t.

You accurately determined the moles of electrons transferred using Faraday's constant and computed the correct mass magnitude of zinc reacted.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Anode/Cathode Role Reversal in Galvanic Cell

You assigned reduction to the zinc electrode instead of oxidation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the spontaneous anode and cathode identities in a Daniell cell. In a Zn−Cu\text{Zn}-\text{Cu} galvanic cell, zinc is more reactive (more easily oxidized) and acts as the negative electrode/anode, dissolving into ions and losing mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Anode vs. Cathode in Galvanic Cells
  • Anode is the site of oxidation (An Ox); cathode is the site of reduction (Red Cat). In a spontaneous cell, the more active metal is oxidized.

  • Always compare reduction potentials or activity: the metal with the lower (more negative) E∘E^\circ oxidizes at the anode, causing that electrode to lose mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the anode reaction: Zn(s)⟶Zn2+(aq)+2e−\text{Zn}(s) \longrightarrow \text{Zn}^{2+}(aq) + 2e^- (oxidation).

  2. Calculate the mass loss of the zinc electrode: Δm=0.0100 mol×65.38 g/mol=0.654 g\Delta m = 0.0100\text{ mol} \times 65.38\text{ g/mol} = 0.654\text{ g}.

  3. Subtract the lost mass from the initial mass: mfinal=10.00 g−0.654 g=9.35 gm_{\text{final}} = 10.00\text{ g} - 0.654\text{ g} = 9.35\text{ g}.

Final answer

9.35 g9.35\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Use the mnemonic 'An Ox, Red Cat' to link oxidation to the anode and reduction to the cathode.

  • When calculating final electrode masses, verify whether the half-reaction consumes the solid metal (loss, subtract) or plates solid metal out (gain, add).

OverviewACEpath Teacher's Diagnosis

03 The student believes that electrons flow through the electrolyte solution rather than ions carrying the charge.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    External wire: electrons flow freely through the metallic copper lattice.

  2. Step 2

    Aqueous solution: free electrons flow through the water between dissolved ions.

    Correct

    In the aqueous electrolyte solution, conduction occurs via the physical migration of mobile hydrated ions (cations moving toward the cathode and anions toward the anode), which involves mass transport.

    Free electrons cannot travel through bulk aqueous solution; instead, electrical charge in the electrolyte is transported entirely by the migration of mobile dissolved ions.

  3. Step 3

    Q=0.500 A×3860 s=1930 C  ⟹  ne=1930 C/96485 C/mol=0.0200 molQ = 0.500\text{ A} \times 3860\text{ s} = 1930\text{ C} \implies n_e = 1930\text{ C} / 96485\text{ C/mol} = 0.0200\text{ mol}

  4. Step 4

    Zn→ZnX2++2 eX−  ⟹  nZn=0.0200 mol/2=0.0100 mol  ⟹  Δm=0.0100 mol×65.38 g/mol=0.654 g\ce{Zn -> Zn^{2+} + 2e^-} \implies n_{\ce{Zn}} = 0.0200\text{ mol} / 2 = 0.0100\text{ mol} \implies \Delta m = 0.0100\text{ mol} \times 65.38\text{ g/mol} = 0.654\text{ g}

  5. Step 5

    Final mass=10.00 g−0.654 g=9.35 g\text{Final mass} = 10.00\text{ g} - 0.654\text{ g} = 9.35\text{ g}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly described metallic conduction as the flow of delocalized electrons through the metallic lattice.

You executed the quantitative stoichiometric electrochemistry calculations with proper units, half-reaction mole ratios, and significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conduction Mechanism Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You extended the concept of electronic conduction into liquid electrolytes, overlooking that hydrated electrons are not stable charge carriers in water and that ionic conduction relies on the movement of solvated ions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metallic vs. Electrolytic Conduction
  • In metals, charge is carried by mobile delocalized electrons without mass transfer; in aqueous electrolytes and molten salts, charge is carried by mobile cations and anions with mass transfer.

  • Whenever current passes through a solution or salt bridge, attribute conduction to the directional migration of ions, never free electrons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the charge carriers in an electrolyte: dissolved cations and anions.

  2. Describe their direction: cations (e.g., ZnX2+\ce{Zn^{2+}}, CuX2+\ce{Cu^{2+}}, KX+\ce{K+}) migrate toward the cathode, while anions (e.g., SOX4X2−\ce{SO4^{2-}}, NOX3X−\ce{NO3^-}) migrate toward the anode.

  3. Note that this ionic conduction involves physical mass transport, in contrast to metallic conduction.

Final answer

(a) Conduction in the external wire is metallic, driven by the drift of delocalized valence electrons through the copper lattice without mass transport. In aqueous solution, conduction is electrolytic, mediated by the directional migration of mobile solvated ions (cations toward the cathode, anions toward the anode) accompanied by mass transport. (b) Final mass of zinc electrode = 9.35 g9.35\text{ g}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental differences between metallic conduction (electron drift) and electrolytic conduction (ion migration).

  • Practice describing how salt bridges complete electrochemical circuits by maintaining electroneutrality via ion flow.

Lock it in

Similar question

01

A silver electrode undergoes oxidation according to Ag(s)→AgX+(aq)+eX−\ce{Ag(s) -> Ag+(aq) + e^-}. If a current of 2.00 A2.00\text{ A} passes through the cell for 965 s965\text{ s}, calculate the mass of silver dissolved (MAg=107.87 g/molM_{\text{Ag}} = 107.87\text{ g/mol}, F=96485 C/molF = 96485\text{ C/mol}).

Answer

2.16 g2.16\text{ g}. First, Q=2.00 A×965 s=1930 CQ = 2.00\text{ A} \times 965\text{ s} = 1930\text{ C}. Then ne=1930 C96485 C/mol=0.0200 moln_e = \frac{1930\text{ C}}{96485\text{ C/mol}} = 0.0200\text{ mol}. Since z=1z = 1, nAg=0.0200 moln_{\ce{Ag}} = 0.0200\text{ mol}. Finally, Δm=0.0200 mol×107.87 g/mol≈2.16 g\Delta m = 0.0200\text{ mol} \times 107.87\text{ g/mol} \approx 2.16\text{ g}.

02

A galvanic cell delivers a steady current of 1.50 A1.50\text{ A} for 1930 s1930\text{ s}. The cathode reaction is the deposition of copper: CuX2+(aq)+2 eX−→Cu(s)\ce{Cu^2+(aq) + 2e^- -> Cu(s)}. If the cathode initially weighed 5.00 g5.00\text{ g}, what is its final mass? (MCu=63.55 g/molM_{\ce{Cu}} = 63.55\text{ g/mol}, F=96485 C/molF = 96485\text{ C/mol})

Answer

5.95 g5.95\text{ g}. Q=1.50 A×1930 s=2895 CQ = 1.50\text{ A} \times 1930\text{ s} = 2895\text{ C}. Moles of electrons ne=289596485=0.0300 moln_e = \frac{2895}{96485} = 0.0300\text{ mol}. Since z=2z = 2 for copper deposition, nCu=0.03002=0.0150 moln_{\ce{Cu}} = \frac{0.0300}{2} = 0.0150\text{ mol}. Mass gained Δm=0.0150 mol×63.55 g/mol=0.953 g\Delta m = 0.0150\text{ mol} \times 63.55\text{ g/mol} = 0.953\text{ g}. Final mass =5.00 g+0.953 g=5.95 g= 5.00\text{ g} + 0.953\text{ g} = 5.95\text{ g}.

03

An electroplating cell deposits chromium metal onto a car part from a solution containing dichromate ions, where chromium is reduced from +6+6 to 00: Cr(VI)+6 eX−→Cr(s)\ce{Cr(VI) + 6e^- -> Cr(s)}. If 13.0 g13.0\text{ g} of chromium (MCr=52.00 g/molM_{\ce{Cr}} = 52.00\text{ g/mol}) is deposited using a constant current of 8.00 A8.00\text{ A}, calculate the required time in seconds (F=96485 C/molF = 96485\text{ C/mol}).

Answer

18100 s18100\text{ s} (or ≈5.03 h\approx 5.03\text{ h}). Moles of Cr\ce{Cr} needed nCr=13.0 g52.00 g/mol=0.250 moln_{\ce{Cr}} = \frac{13.0\text{ g}}{52.00\text{ g/mol}} = 0.250\text{ mol}. Because z=6z = 6 electrons per atom of Cr\ce{Cr}, moles of electrons ne=0.250 mol×6=1.50 moln_e = 0.250\text{ mol} \times 6 = 1.50\text{ mol}. Total charge Q=1.50 mol×96485 C/mol=144728 CQ = 1.50\text{ mol} \times 96485\text{ C/mol} = 144728\text{ C}. Time t=QI=144728 C8.00 A≈18100 st = \frac{Q}{I} = \frac{144728\text{ C}}{8.00\text{ A}} \approx 18100\text{ s}.

Loading workspace…