Resources
A solution contains and . A dilute solution of potassium iodide, , is slowly titrated into the mixture at . Given and : (a) Identify which cation precipitates first as an iodide salt. (b) Calculate the critical concentration of iodide, , at the exact threshold boundary where the second cation just begins to precipitate. (c) Calculate the percentage of the first cation remaining dissolved in solution at this exact onset threshold.
Answer and steps
Final answer
(a) precipitates first; (b) ; (c) Percentage of remaining .
Steps
Part (a): Determining Which Cation Precipitates First
Precipitation begins when the reaction quotient reaches the solubility product constant .
- Threshold for precipitation: The dissolution equilibrium is: The critical iodide concentration required to start precipitating is:
- Threshold for precipitation: The dissolution equilibrium is: \ce{PbI2(s) <=> Pb^{2+}(aq) + 2 I-(aq)}, \quad K_{sp} = [\ce{Pb^{2+}][\ce{I-}]^2 The critical iodide concentration required to initiate precipitation of is:
- Comparison: Because , the concentration of iodide needed to precipitate is orders of magnitude smaller than that needed for . Therefore, precipitates first as yellow .
Part (b): Critical Iodide Concentration for the Onset of Precipitation
The second cation, , begins to precipitate when the ion product reaches at its initial concentration :
Thus, at the exact onset threshold of the second precipitate, the iodide concentration in solution is .
Part (c): Percentage of Remaining in Solution
At the point where just begins to precipitate, the solution is saturated with respect to and .
- Calculate the unprecipitated :
- Calculate the percentage remaining:
This extremely low percentage confirms that the separation of from by fractional precipitation is virtually quantitative before any forms.
Typical errors
01 The student forgets to take the square root for the stoichiometric coefficient of iodide in the solubility product expression of PbI₂, calculating [I⁻] as Ksp/[Pb²⁺] instead of √(Ksp/[Pb²⁺]).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly identified that precipitates first because its precipitation threshold is much lower. However, when finding the threshold for , you evaluated instead of taking the square root, since .
- Step 2Correct
Because the dissolution reaction is , the solubility product expression is . Solving for requires taking the square root: .
- Step 3Correct
Your setup and algebraic steps for calculating unprecipitated and the remaining percentage were completely correct, but the numerical answer was affected by substituting your earlier incorrect value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly stated that precipitates before .
You correctly calculated the critical iodide threshold needed to initiate precipitation as .
You used the correct relationship between , , and to determine the remaining silver ion concentration.
You correctly applied the percentage formula comparing remaining dissolved ion concentration to initial concentration.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of , forgetting to square the iodide concentration.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing a electrolyte like with a electrolyte like . For salts, the anion concentration is raised to the second power in the equilibrium expression , which requires a square root when isolating .
REASONING PATH
Your ACEpath teacher’s suggested approach- Match Exponents to Reaction Stoichiometry
For a salt , the solubility product is .
Always write down the balanced dissociation equation before writing down the expression.
- Isolating Anion Concentration
When solving from , remember that $[] = .
Check the exponent on the target ion; if it is , make sure to take the square root as the final algebraic operation.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the equilibrium expression: .
Solve for the critical iodide concentration: .
Find unprecipitated at this iodide concentration: .
Compute percentage of remaining: .
(a) precipitates first; (b) ; (c) Remaining
02 The student compares Ksp values directly without calculating the necessary [I⁻] concentrations, mistakenly assuming the smaller Ksp value automatically precipitates first.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Because , precipitates first
Correct; precipitates first
You cannot compare values directly when the salts have different stoichiometries (1:1 for vs. 1:2 for ). You must determine the precipitating ion concentration, , required to reach for each cation.
- Step 2Correct
You set up the correct equilibrium square-root expression, but evaluated the power of ten incorrectly.
- Step 3Correct
Your method of dividing by the threshold and finding the percentage of initial is completely sound; this value is numerically off only because of the propagated value from part (b).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly formulated the solubility product expression for lead(II) iodide.
You correctly applied the common-ion relationship to determine remaining dissolved at the onset threshold.
You set up the correct formula for the remaining cation percentage.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou evaluated the radical expression with an incorrect power of ten in part (b).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that a smaller automatically means a salt precipitates at a lower added ion concentration, overlooking that dimensions and power dependencies differ when the salt stoichiometries are not identical.
REASONING PATH
Your ACEpath teacher’s suggested approach- Comparing Precipitation Thresholds
When comparing salts with different ion ratios (e.g., vs. ), precipitation order is determined solely by the critical concentration of the common titrant ion required to initiate precipitation, never by raw values alone.
Always solve for the minimum required to satisfy for each compound before drawing conclusions about which salt precipitates first.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate critical for : .
Calculate critical for : .
Because , precipitates first.
At the onset of precipitation, .
Find remaining : .
Calculate percentage remaining: .
(a) precipitates first; (b) ; (c)
03 The student calculates the fraction of remaining cation but forgets to multiply by 100 to convert it into a percentage.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You correctly set up the solubility product expression for , but you made an arithmetic error with the exponent when evaluating the square root, writing instead of .
- Step 3Correct
You applied the correct equilibrium relationship , but your numerical result was affected by the incorrect iodide concentration carried over from part (b).
- Step 4Correct
You computed the fractional ratio of remaining cation to initial cation, but you did not multiply by to express the result as a percentage as requested by the problem.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the equilibrium expressions and threshold conditions for precipitation of both salts.
You correctly concluded that silver precipitates before lead because it requires a substantially smaller iodide concentration.
You correctly set up the ratio of unprecipitated cation concentration to initial cation concentration.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou miscalculated the power of ten when evaluating the square root in part (b), and you left your final answer in part (c) as a bare fraction rather than multiplying by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not verify the exponent under the square root before simplifying, and you stopped after finding the decimal fraction instead of converting to the requested percentage unit.
REASONING PATH
Your ACEpath teacher’s suggested approach- Square Roots of Scientific Notation
Before taking a square root, adjust the power of ten to an even exponent: .
Express the quotient under the radical with an even exponent first to avoid mental arithmetic slips.
- Fraction to Percentage
A fraction represents a proportion out of , whereas a percentage represents a proportion out of : .
Always multiply the unprecipitated fraction by when a problem asks for percentage remaining.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the critical iodide concentration: .
Substitute into the equilibrium expression: .
Divide by the initial concentration and multiply by : .
(a) precipitates first; (b) ; (c) Percentage of remaining .
Lock it in
What is the equilibrium expression for the dissolution of a salt ?
. Stoichiometric coefficients in the balanced equation become exponents in the mass-action expression.
Similar question
A solution contains . If solid sodium fluoride () is slowly added, at what concentration of fluoride ion does barium fluoride just begin to precipitate? Given: .
Answer
. Key step: Write , then isolate .
A solution contains and . A hydroxide solution is gradually added. Given and , determine which metal hydroxide precipitates first.
Answer
precipitates first. Key steps: For , . For , . Since , precipitates first.
A mixture contains and . Silver nitrate () is added dropwise. Given and : (a) Find the critical when begins to precipitate. (b) Find the percentage of remaining unprecipitated at that onset point.
Answer
(a) ; (b) . Key steps: . Remaining . Percentage remaining .