Resources

A solution is prepared by dissolving 11.1 g11.1\text{ g} of solid calcium chloride (CaCl2\text{CaCl}_2, molar mass =110.98 g/mol= 110.98\text{ g/mol}) into 400.0 g400.0\text{ g} of water (Kf=1.86∘C⋅kg/molK_f = 1.86^\circ\text{C}\cdot\text{kg/mol}, normal freezing point =0.00∘C= 0.00^\circ\text{C}). Assuming complete ionic dissociation according to the stoichiometric dissolution reaction CaCl2(s)→Ca2+(aq)+2Cl−(aq)\text{CaCl}_2(s) \rightarrow \text{Ca}^{2+}(aq) + 2\text{Cl}^-(aq) with an ideal van 't Hoff factor, calculate the molality of the compound, the effective total molality of dissolved solute particles, and the resulting freezing point of the mixture.

Answer and steps

Final answer

Compound Molality =0.250 m= 0.250\text{ }m; Total Particle Molality =0.750 m= 0.750\text{ }m; Freezing Point =−1.40∘C= -1.40^\circ\text{C}

Steps

01

Calculate the moles of CaClX2\ce{CaCl2}

First, determine the number of moles of calcium chloride dissolved using its given mass and molar mass:

Moles of CaClX2=massmolar mass=11.1 g110.98 g/mol≈0.1000 mol\text{Moles of }\ce{CaCl2} = \frac{\text{mass}}{\text{molar mass}} = \frac{11.1\text{ g}}{110.98\text{ g/mol}} \approx 0.1000\text{ mol}

02

Calculate the compound molality (mm)

Molality (mm) is defined as the moles of solute per kilogram of solvent. Convert the mass of water from grams to kilograms:

Mass of solvent (water)=400.0 g=0.4000 kg\text{Mass of solvent (water)} = 400.0\text{ g} = 0.4000\text{ kg}

Now, compute the molality of CaClX2\ce{CaCl2}:

mCaClX2=moles of solutemass of solvent in kg=0.1000 mol0.4000 kg=0.250 mm_{\ce{CaCl2}} = \frac{\text{moles of solute}}{\text{mass of solvent in kg}} = \frac{0.1000\text{ mol}}{0.4000\text{ kg}} = 0.250\text{ }m

03

Determine the van 't Hoff factor and effective total particle molality

Calcium chloride is an ionic compound that dissociates in water:

CaClX2(s)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(s) -> Ca^{2+}(aq) + 2Cl-(aq)}

For complete dissociation, each formula unit yields 11 calcium ion (CaX2+\ce{Ca^{2+}}) and 22 chloride ions (ClX−\ce{Cl-}), giving an ideal van 't Hoff factor of:

i=1+2=3i = 1 + 2 = 3

Colligative properties depend on the total concentration of dissolved particles rather than intact formula units. The total particle molality (mtotalm_{\text{total}}) is:

mtotal=i⋅mCaClX2=3⋅0.250 m=0.750 mm_{\text{total}} = i \cdot m_{\ce{CaCl2}} = 3 \cdot 0.250\text{ }m = 0.750\text{ }m

04

Calculate freezing point depression and final freezing point

The freezing point depression (ΔTf\Delta T_f) is calculated using the cryoscopic equation:

ΔTf=Kf⋅mtotal=i⋅Kf⋅m\Delta T_f = K_f \cdot m_{\text{total}} = i \cdot K_f \cdot m

Substitute the given values:

ΔTf=(1.86∘C⋅kg/mol)⋅0.750 mol/kg=1.395∘C≈1.40∘C\Delta T_f = (1.86^\circ\text{C}\cdot\text{kg/mol}) \cdot 0.750\text{ mol/kg} = 1.395^\circ\text{C} \approx 1.40^\circ\text{C}

Pitfall: Freezing point depression lowers the freezing point below the pure solvent's freezing point; do not add ΔTf\Delta T_f to the normal freezing point.

Tf=Tf∘−ΔTf=0.00∘C−1.40∘C=−1.40∘CT_f = T_f^\circ - \Delta T_f = 0.00^\circ\text{C} - 1.40^\circ\text{C} = -1.40^\circ\text{C}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that ionic dissociation produces multiple solute particles, using a van 't Hoff factor of 1 to find particle molality and freezing point depression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(CaClX2)=11.1110.98=0.100 mol  ⟹  m=0.100 mol0.4000 kg=0.250 mol/kgn(\ce{CaCl2}) = \frac{11.1}{110.98} = 0.100\text{ mol} \implies m = \frac{0.100\text{ mol}}{0.4000\text{ kg}} = 0.250\text{ mol/kg}

  2. Step 2

    i=1  ⟹  mparticles=0.250 mol/kgi = 1 \implies m_{\text{particles}} = 0.250\text{ mol/kg}

    Correct

    i=1+2=3  ⟹  mtotal=3⋅0.250 m=0.750 mi = 1 + 2 = 3 \implies m_{\text{total}} = 3 \cdot 0.250\text{ }m = 0.750\text{ }m

    Calcium chloride is an ionic salt that dissociates into three ions: CaClX2(s)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(s) -> Ca^{2+}(aq) + 2Cl-(aq)}. Therefore, the ideal van 't Hoff factor is i=3i = 3, giving a total particle molality of 3×0.250 m=0.750 m3 \times 0.250\text{ }m = 0.750\text{ }m.

  3. Step 3

    ΔTf=1.86×0.250=0.465∘C  ⟹  Tf=0.00∘C−0.465∘C=−0.465∘C\Delta T_f = 1.86 \times 0.250 = 0.465^\circ\text{C} \implies T_f = 0.00^\circ\text{C} - 0.465^\circ\text{C} = -0.465^\circ\text{C}

    Correct

    ΔTf=1.86∘C⋅kg/mol×0.750 mol/kg=1.40∘C  ⟹  Tf=0.00∘C−1.40∘C=−1.40∘C\Delta T_f = 1.86^\circ\text{C}\cdot\text{kg/mol} \times 0.750\text{ mol/kg} = 1.40^\circ\text{C} \implies T_f = 0.00^\circ\text{C} - 1.40^\circ\text{C} = -1.40^\circ\text{C}

    Your cryoscopic formula and subtraction from 0.00∘C0.00^\circ\text{C} were executed properly, but the numerical result was affected by using m=0.250 mm = 0.250\text{ }m rather than the total particle molality mtotal=0.750 mm_{\text{total}} = 0.750\text{ }m.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molar amount of CaClX2\ce{CaCl2} from its mass and molar mass.

You converted the solvent mass into kilograms and found the correct compound molality.

You correctly applied the freezing point depression relationship by subtracting ΔTf\Delta T_f from the normal freezing point of pure water.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglected Ionic Dissociation (van 't Hoff Factor)

You treated CaClX2\ce{CaCl2} as an intact, non-dissociating molecular solute (i=1i = 1) rather than counting the ions released upon complete dissociation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Colligative properties depend on the total concentration of dissolved solute particles. For soluble ionic compounds, count the total moles of cations and anions produced per formula unit to find the ideal van 't Hoff factor ii.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Solute Type
  • Molecular solutes (like glucose or urea) do not dissociate (i=1i = 1), whereas soluble ionic salts dissociate into separate ions (i>1i > 1).

  • Write the dissociation equation AXx BXy(s)→x AXy+(aq)+y BXx−(aq)\ce{A_x B_y(s) -> x A^{y+}(aq) + y B^{x-}(aq)} and sum the coefficients: i=x+yi = x + y.

Calculate Particle Molality
  • mtotal=i⋅mcompoundm_{\text{total}} = i \cdot m_{\text{compound}}.

  • Multiply the compound's molality by the van 't Hoff factor before calculating colligative property shifts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the dissociation reaction: CaClX2(s)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(s) -> Ca^{2+}(aq) + 2Cl-(aq)}, yielding 1+2=31 + 2 = 3 ions per formula unit (i=3i = 3).

  2. Calculate the effective particle molality: mtotal=i⋅mCaClX2=3×0.250 m=0.750 mm_{\text{total}} = i \cdot m_{\ce{CaCl2}} = 3 \times 0.250\text{ }m = 0.750\text{ }m.

  3. Compute the freezing point depression: ΔTf=Kf⋅mtotal=(1.86∘C⋅kg/mol)(0.750 mol/kg)=1.395∘C≈1.40∘C\Delta T_f = K_f \cdot m_{\text{total}} = (1.86^\circ\text{C}\cdot\text{kg/mol})(0.750\text{ mol/kg}) = 1.395^\circ\text{C} \approx 1.40^\circ\text{C}.

  4. Determine the freezing point of the solution: Tf=0.00∘C−1.40∘C=−1.40∘CT_f = 0.00^\circ\text{C} - 1.40^\circ\text{C} = -1.40^\circ\text{C}.

Final answer

Compound Molality =0.250 m= 0.250\text{ }m; Total Particle Molality =0.750 m= 0.750\text{ }m; Freezing Point =−1.40∘C= -1.40^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether a given solute is an electrolyte (ionic) or nonelectrolyte (molecular).

  • Always write out the balanced dissolution equation to find ii before substituting into ΔTf=iKfm\Delta T_f = i K_f m.

OverviewACEpath Teacher's Diagnosis

02 The student assumes CaCl₂ dissociates into two ions instead of three, leading to an incorrect van 't Hoff factor of 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=11.1 g110.98 g/mol=0.100 moln = \frac{11.1\text{ g}}{110.98\text{ g/mol}} = 0.100\text{ mol}

  2. Step 2

    m=0.100 mol0.4000 kg=0.250 mol/kgm = \frac{0.100\text{ mol}}{0.4000\text{ kg}} = 0.250\text{ mol/kg}

  3. Step 3

    CaClX2→CaX2++ClX− (2 ions)  ⟹  mparticles=2×0.250=0.500 mol/kg\ce{CaCl2 -> Ca^{2+} + Cl^-}\text{ (2 ions)} \implies m_{\text{particles}} = 2 \times 0.250 = 0.500\text{ mol/kg}

    Correct

    CaClX2(s)→CaX2+(aq)+2 ClX−(aq)  ⟹  i=1+2=3  ⟹  mtotal=3×0.250 m=0.750 m\ce{CaCl2(s) -> Ca^{2+}(aq) + 2Cl^-(aq)} \implies i = 1 + 2 = 3 \implies m_{\text{total}} = 3 \times 0.250\text{ }m = 0.750\text{ }m

    When CaClX2\ce{CaCl2} dissolves, each formula unit releases one CaX2+\ce{Ca^{2+}} ion and two ClX−\ce{Cl^-} ions because of the subscript 22. That gives 33 dissolved ions in total (i=3i = 3), so the particle molality is 3×0.250 m=0.750 m3 \times 0.250\text{ }m = 0.750\text{ }m rather than 0.500 m0.500\text{ }m.

  4. Step 4

    ΔTf=1.86×0.500=0.930∘C  ⟹  Tf=0.00∘C−0.930∘C=−0.930∘C\Delta T_f = 1.86 \times 0.500 = 0.930^\circ\text{C} \implies T_f = 0.00^\circ\text{C} - 0.930^\circ\text{C} = -0.930^\circ\text{C}

    Correct

    ΔTf=1.86∘C⋅kg/mol×0.750 mol/kg=1.40∘C  ⟹  Tf=0.00∘C−1.40∘C=−1.40∘C\Delta T_f = 1.86^\circ\text{C}\cdot\text{kg/mol} \times 0.750\text{ mol/kg} = 1.40^\circ\text{C} \implies T_f = 0.00^\circ\text{C} - 1.40^\circ\text{C} = -1.40^\circ\text{C}

    Your freezing point depression formula and subtraction from 0.00∘C0.00^\circ\text{C} were set up properly, but the numerical result was affected by the incorrect particle molality from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the molar amount of solute accurately from its mass and molar mass.

You converted grams of solvent to kilograms and found the correct molality of the intact salt.

You recognized that colligative properties depend on the total concentration of dissolved particles.

You applied the freezing point depression formula and subtracted ΔTf\Delta T_f from the pure solvent's freezing point.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unbalanced Dissociation / Incorrect van 't Hoff Factor

You wrote CaClX2→CaX2++ClX−\ce{CaCl2 -> Ca^{2+} + Cl^-} without balancing the chloride atoms, omitting the coefficient 22 in front of ClX−\ce{Cl^-}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking chemical formula subscripts when determining dissociation stoichiometry leads to undercounting the total number of ions produced per formula unit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Subscripts become ionic coefficients
  • For a strong electrolyte AXx BXy(s)→x AXy+(aq)+y BXx−(aq)\ce{A_x B_y(s) -> x A^{y+}(aq) + y B^{x-}(aq)}, the ideal van 't Hoff factor is i=x+yi = x + y.

  • Inspect the subscript of every element or polyatomic group in the neutral formula unit and balance both mass and charge before counting particles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the balanced dissociation equation: CaClX2(s)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(s) -> Ca^{2+}(aq) + 2Cl^-(aq)}.

  2. Count the total ions released per formula unit: 1 (from CaX2+)+2 (from ClX−)=3 ions1\text{ (from }\ce{Ca^{2+}}\text{)} + 2\text{ (from }\ce{Cl^-}\text{)} = 3\text{ ions}, so i=3i = 3.

  3. Compute the effective particle molality: mtotal=3×0.250 m=0.750 mm_{\text{total}} = 3 \times 0.250\text{ }m = 0.750\text{ }m.

  4. Calculate freezing point depression: ΔTf=Kf⋅mtotal=1.86∘C⋅kg/mol×0.750 mol/kg=1.395∘C≈1.40∘C\Delta T_f = K_f \cdot m_{\text{total}} = 1.86^\circ\text{C}\cdot\text{kg/mol} \times 0.750\text{ mol/kg} = 1.395^\circ\text{C} \approx 1.40^\circ\text{C}.

  5. Calculate final freezing point: Tf=0.00∘C−1.40∘C=−1.40∘CT_f = 0.00^\circ\text{C} - 1.40^\circ\text{C} = -1.40^\circ\text{C}.

Final answer

Compound Molality =0.250 m= 0.250\text{ }m; Total Particle Molality =0.750 m= 0.750\text{ }m; Freezing Point =−1.40∘C= -1.40^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out and balance the complete ionic dissolution equation to ensure conservation of mass and charge.

  • Sum the stoichiometric coefficients of all aqueous products to determine the ideal van 't Hoff factor ii.

  • Multiply the un-dissociated compound molality by ii to obtain the effective particle concentration before calculating any colligative change.

OverviewACEpath Teacher's Diagnosis

03 The student calculates freezing point depression correctly but adds it to the normal freezing point instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=11.1110.98=0.100 mol  ⟹  m=0.100 mol0.4000 kg=0.250 mol/kgn = \frac{11.1}{110.98} = 0.100\text{ mol} \implies m = \frac{0.100\text{ mol}}{0.4000\text{ kg}} = 0.250\text{ mol/kg}

  2. Step 2

    i=3  ⟹  mparticles=3×0.250=0.750 mol/kgi = 3 \implies m_{\text{particles}} = 3 \times 0.250 = 0.750\text{ mol/kg}

  3. Step 3

    ΔTf=1.86×0.750=1.395∘C\Delta T_f = 1.86 \times 0.750 = 1.395^\circ\text{C}

  4. Step 4

    Tf=0.00∘C+1.40∘C=+1.40∘CT_f = 0.00^\circ\text{C} + 1.40^\circ\text{C} = +1.40^\circ\text{C}

    Correct

    Tf=Tf∘−ΔTf=0.00∘C−1.40∘C=−1.40∘CT_f = T_f^\circ - \Delta T_f = 0.00^\circ\text{C} - 1.40^\circ\text{C} = -1.40^\circ\text{C}

    Dissolving a nonvolatile solute causes freezing point depression, meaning the freezing point decreases below that of the pure solvent. You should subtract ΔTf\Delta T_f from Tf∘T_f^\circ, giving 0.00∘C−1.40∘C=−1.40∘C0.00^\circ\text{C} - 1.40^\circ\text{C} = -1.40^\circ\text{C}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles and compound molality of CaClX2\ce{CaCl2}.

You correctly accounted for complete ionic dissociation using i=3i = 3 to find the total particle molality.

You correctly computed the magnitude of the freezing point depression ΔTf\Delta T_f using KfK_f.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in colligative property temperature change

You treated freezing point depression as an elevation and added ΔTf\Delta T_f to 0.00∘C0.00^\circ\text{C} instead of subtracting it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign convention of colligative properties: solutes lower (depress) the freezing point (Tf=Tf∘−ΔTfT_f = T_f^\circ - \Delta T_f) and raise (elevate) the boiling point (Tb=Tb∘+ΔTbT_b = T_b^\circ + \Delta T_b).

REASONING PATH
Your ACEpath teacher’s suggested approach
Colligative Property Direction Rule
  • Adding a nonvolatile solute always expands the liquid range: freezing point goes down (Tf=Tf∘−ΔTfT_f = T_f^\circ - \Delta T_f), and boiling point goes up (Tb=Tb∘+ΔTbT_b = T_b^\circ + \Delta T_b).

  • Always verify that your calculated solution freezing point is lower than the pure solvent's freezing point.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that ΔTf\Delta T_f represents the decrease in freezing temperature: Tf=Tf∘−ΔTfT_f = T_f^\circ - \Delta T_f.

  2. Substitute the pure water freezing point and the calculated depression: Tf=0.00∘C−1.40∘C=−1.40∘CT_f = 0.00^\circ\text{C} - 1.40^\circ\text{C} = -1.40^\circ\text{C}.

Final answer

Compound Molality =0.250 m= 0.250\text{ }m; Total Particle Molality =0.750 m= 0.750\text{ }m; Freezing Point =−1.40∘C= -1.40^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether the colligative property is an elevation or a depression before adding or subtracting ΔT\Delta T.

  • Perform a physical reality check: adding salt to water makes it freeze below 0∘C0^\circ\text{C}, never above.

Lock it in

Similar question

01

A solution contains 0.150 mol0.150\text{ mol} of potassium phosphate (KX3POX4\ce{K3PO4}) dissolved in 500.0 g500.0\text{ g} of water. Assuming complete ionic dissociation, calculate the effective total particle molality of the solution.

Answer

1.20 m1.20\text{ }m. The compound molality is m=0.150 mol0.5000 kg=0.300 mm = \frac{0.150\text{ mol}}{0.5000\text{ kg}} = 0.300\text{ }m. Since KX3POX4(s)→3 KX+(aq)+POX4X3−(aq)\ce{K3PO4(s) -> 3K+(aq) + PO4^{3-}(aq)}, i=3+1=4i = 3 + 1 = 4. Thus, mtotal=4×0.300 m=1.20 mm_{\text{total}} = 4 \times 0.300\text{ }m = 1.20\text{ }m.

02

Calculate the freezing point of an aqueous solution prepared by dissolving 28.4 g28.4\text{ g} of sodium sulfate (NaX2SOX4\ce{Na2SO4}, molar mass =142.04 g/mol= 142.04\text{ g/mol}) in 250.0 g250.0\text{ g} of water (Kf=1.86∘C⋅kg/molK_f = 1.86^\circ\text{C}\cdot\text{kg/mol}). Assume ideal dissociation.

Answer

−4.46∘C-4.46^\circ\text{C}. Moles of NaX2SOX4=28.4 g142.04 g/mol=0.200 mol\ce{Na2SO4} = \frac{28.4\text{ g}}{142.04\text{ g/mol}} = 0.200\text{ mol}. Compound molality m=0.200 mol0.2500 kg=0.800 mm = \frac{0.200\text{ mol}}{0.2500\text{ kg}} = 0.800\text{ }m. Dissociation gives NaX2SOX4→2 NaX++SOX4X2−\ce{Na2SO4 -> 2Na+ + SO4^{2-}}, so i=3i = 3. Total particle molality mtotal=3×0.800 m=2.40 mm_{\text{total}} = 3 \times 0.800\text{ }m = 2.40\text{ }m. Freezing point depression ΔTf=(1.86)(2.40)=4.46∘C\Delta T_f = (1.86)(2.40) = 4.46^\circ\text{C}, giving Tf=0.00∘C−4.46∘C=−4.46∘CT_f = 0.00^\circ\text{C} - 4.46^\circ\text{C} = -4.46^\circ\text{C}.

03

An unknown ionic chloride salt with formula MClXx\ce{MCl_x} has a molar mass of 133.34 g/mol133.34\text{ g/mol}. Dissolving 13.33 g13.33\text{ g} of this salt into 500.0 g500.0\text{ g} of water produces a freezing point of −1.49∘C-1.49^\circ\text{C} (Kf=1.86∘C⋅kg/molK_f = 1.86^\circ\text{C}\cdot\text{kg/mol}). Assuming complete dissociation, determine the integer value of xx and identify the van 't Hoff factor.

Answer

x=1x = 1 and i=2i = 2. Moles of salt =13.33 g133.34 g/mol=0.1000 mol= \frac{13.33\text{ g}}{133.34\text{ g/mol}} = 0.1000\text{ mol}. Compound molality m=0.1000 mol0.5000 kg=0.200 mm = \frac{0.1000\text{ mol}}{0.5000\text{ kg}} = 0.200\text{ }m. From ΔTf=1.49∘C\Delta T_f = 1.49^\circ\text{C}, the particle molality is mtotal=1.491.86=0.801 mm_{\text{total}} = \frac{1.49}{1.86} = 0.801\text{ }m. Then i=mtotalm=0.8010.200≈4i = \frac{m_{\text{total}}}{m} = \frac{0.801}{0.200} \approx 4, which means 1+x=4  ⟹  x=31 + x = 4 \implies x = 3 (e.g., AlClX3\ce{AlCl3}), so i=4i = 4.

Loading workspace…