Resources

Three aqueous solutions are prepared in volumetric flasks: Solution 1 contains 1500 ppm1500\text{ ppm} of copper(II) chloride (CuCl2\text{CuCl}_2, molar mass =134.45 g/mol= 134.45\text{ g}/\text{mol}, density =1.00 g/mL= 1.00\text{ g}/\text{mL}); Solution 2 contains 25.0 mmol/L25.0\text{ mmol}/\text{L} of D-glucose (C6H12O6\text{C}_6\text{H}_{12}\text{O}_6, molar mass =180.16 g/mol= 180.16\text{ g}/\text{mol}); Solution 3 contains 350 mg350\text{ mg} of urea ((NH2)2CO(\text{NH}_2)_2\text{CO}, molar mass =60.06 g/mol= 60.06\text{ g}/\text{mol}) dissolved in water to make a total volume of 250.0 mL250.0\text{ mL}. (a) Convert the solute concentration of each solution into molarity (mol/L\text{mol}/\text{L}). (b) Calculate the total concentration of mobile ions (in mol/L\text{mol}/\text{L}) present in each solution, and rank the three solutions in order of increasing electrical conductivity.

Answer and steps

Final answer

(a) Solution 1: 1.12×10−2 M CuCl21.12 \times 10^{-2}\text{ M }\text{CuCl}_2; Solution 2: 2.50×10−2 M C6H12O62.50 \times 10^{-2}\text{ M }\text{C}_6\text{H}_{12}\text{O}_6; Solution 3: 2.33×10−2 M (NH2)2CO2.33 \times 10^{-2}\text{ M }(\text{NH}_2)_2\text{CO}. (b) Total ion concentration: Solution 1: 3.36×10−2 M3.36 \times 10^{-2}\text{ M} (1.12×10−2 M Cu2++2.24×10−2 M Cl−1.12 \times 10^{-2}\text{ M }\text{Cu}^{2+} + 2.24 \times 10^{-2}\text{ M }\text{Cl}^-); Solution 2: 0 M0\text{ M}; Solution 3: 0 M0\text{ M}. Conductivity ranking: Solution 2≈Solution 3<Solution 1\text{Solution 2} \approx \text{Solution 3} < \text{Solution 1}.

Steps

Part (a): Determining Molarity for Each Solution

Molarity (MM) is defined as the moles of solute per liter of solution: M=nsoluteVsolutionM = \frac{n_{\text{solute}}}{V_{\text{solution}}}

  1. Solution 1: Copper(II) chloride (CuClX2\ce{CuCl2})

    • Concentration in parts per million (ppm\text{ppm}) is defined as milligrams of solute per kilogram of solution: Concentration=1500 ppm=1500 mg solute per 1 kg solution\text{Concentration} = 1500\text{ ppm} = 1500\text{ mg solute per } 1\text{ kg solution}
    • Since the density of the solution is 1.00 g/mL1.00\text{ g/mL} (1000 g/L=1 kg/L1000\text{ g/L} = 1\text{ kg/L}), 1 L1\text{ L} of solution has a mass of 1 kg1\text{ kg}: Mass concentration=1500 mg1 L=1.500 g/L\text{Mass concentration} = \frac{1500\text{ mg}}{1\text{ L}} = 1.500\text{ g/L}
    • Dividing by the molar mass of CuClX2\ce{CuCl2} (134.45 g/mol134.45\text{ g/mol}): M1=1.500 g/L134.45 g/mol≈1.12×10−2 M CuClX2M_1 = \frac{1.500\text{ g/L}}{134.45\text{ g/mol}} \approx 1.12 \times 10^{-2}\text{ M } \ce{CuCl2}
  2. Solution 2: D-glucose (CX6HX12OX6\ce{C6H12O6})

    • The given concentration is in millimoles per liter (mmol/L\text{mmol/L}): M2=25.0 mmol/L×1 mol1000 mmol=2.50×10−2 M CX6HX12OX6M_2 = 25.0\text{ mmol/L} \times \frac{1\text{ mol}}{1000\text{ mmol}} = 2.50 \times 10^{-2}\text{ M } \ce{C6H12O6}
  3. Solution 3: Urea ((NHX2)2CO(\ce{NH2})_2\ce{CO})

    • Solute mass: m=350 mg=0.350 gm = 350\text{ mg} = 0.350\text{ g}
    • Moles of urea: n=0.350 g60.06 g/mol≈5.828×10−3 moln = \frac{0.350\text{ g}}{60.06\text{ g/mol}} \approx 5.828 \times 10^{-3}\text{ mol}
    • Solution volume: V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}
    • Molarity: M3=5.828×10−3 mol0.2500 L≈2.33×10−2 M (NHX2)2COM_3 = \frac{5.828 \times 10^{-3}\text{ mol}}{0.2500\text{ L}} \approx 2.33 \times 10^{-2}\text{ M } (\ce{NH2})_2\ce{CO}

Part (b): Mobile Ion Concentrations and Conductivity Ranking

  1. Behavior of Solutes in Water
    • CuClX2\ce{CuCl2} (Ionic compound / Strong electrolyte): Completely dissociates in aqueous solution: CuClX2(aq)→CuX2+(aq)+2 ClX−(aq)\ce{CuCl2(aq) -> Cu^2+(aq) + 2 Cl^-(aq)}
      • [CuX2+]=1.12×10−2 M[\ce{Cu^2+}] = 1.12 \times 10^{-2}\text{ M}
      • [ClX−]=2×(1.12×10−2 M)=2.24×10−2 M[\ce{Cl^-}] = 2 \times (1.12 \times 10^{-2}\text{ M}) = 2.24 \times 10^{-2}\text{ M}
      • Total ion concentration: [Total ions]=1.12×10−2 M+2.24×10−2 M=3.36×10−2 M[\text{Total ions}] = 1.12 \times 10^{-2}\text{ M} + 2.24 \times 10^{-2}\text{ M} = 3.36 \times 10^{-2}\text{ M}
    • Glucose (CX6HX12OX6\ce{C6H12O6}) and Urea ((NHX2)2CO(\ce{NH2})_2\ce{CO}) (Molecular compounds / Non-electrolytes): These substances consist of neutral molecules held together by covalent bonds and intermolecular forces (hydrogen bonds and dispersion forces). When dissolved in water, they disperse as intact, neutral molecules rather than separating into ions: [Total ions]Solution 2=0 M[\text{Total ions}]_{\text{Solution 2}} = 0\text{ M} [Total ions]Solution 3=0 M[\text{Total ions}]_{\text{Solution 3}} = 0\text{ M}

Common Pitfall: A higher molarity of a dissolved molecular solute does not mean higher conductivity. Electrical current in solution requires freely moving charged particles (ions). Uncharged molecular solutes do not conduct electricity regardless of their concentration.

  1. Electrical Conductivity Ranking Because electrical conductivity is directly proportional to the concentration of free, mobile charge carriers:
    • Solutions 2 and 3 lack ions and are essentially non-conductive (leaving only the negligible autoionization of pure water).
    • Solution 1 provides a significant concentration of mobile cations (CuX2+\ce{Cu^2+}) and anions (ClX−\ce{Cl-}).

Solution 2≈Solution 3<Solution 1\text{Solution 2} \approx \text{Solution 3} < \text{Solution 1}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that copper(II) chloride dissociates into three ions (one Cu²⁺ and two Cl⁻) and treats the ion concentration as equal to the salt's molarity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Solution 1: 1500 mg/L=1.50 g/L  ⟹  M1=(1.50 g/L)/(134.45 g/mol)=0.0112 mol/L1500\text{ mg/L} = 1.50\text{ g/L} \implies M_1 = (1.50\text{ g/L}) / (134.45\text{ g/mol}) = 0.0112\text{ mol/L}; Solution 2: 25.0 mmol/L=0.0250 mol/L25.0\text{ mmol/L} = 0.0250\text{ mol/L}; Solution 3: n3=0.350 g/(60.06 g/mol)=0.00583 mol  ⟹  M3=0.00583 mol/0.2500 L=0.0233 mol/Ln_3 = 0.350\text{ g} / (60.06\text{ g/mol}) = 0.00583\text{ mol} \implies M_3 = 0.00583\text{ mol} / 0.2500\text{ L} = 0.0233\text{ mol/L}

  2. Step 2

    CuClX2\ce{CuCl2} is an electrolyte, so ion concentration = 0.0112 mol/L0.0112\text{ mol/L}

    Correct

    [Total ions]=[CuX2+]+[ClX−]=0.0112 mol/L+2(0.0112 mol/L)=0.0336 mol/L[\text{Total ions}] = [\ce{Cu^2+}] + [\ce{Cl^-}] = 0.0112\text{ mol/L} + 2(0.0112\text{ mol/L}) = 0.0336\text{ mol/L}

    You recognized that CuClX2\ce{CuCl2} is an electrolyte, but you treated the ion concentration as equal to the concentration of the salt. Because CuClX2(aq)→CuX2+(aq)+2 ClX−(aq)\ce{CuCl2(aq) -> Cu^2+(aq) + 2 Cl^-(aq)}, each formula unit releases three ions, giving a total ion concentration of 3×0.0112 mol/L=0.0336 mol/L3 \times 0.0112\text{ mol/L} = 0.0336\text{ mol/L}.

  3. Step 3

    Glucose and urea are non-electrolytes, so ion concentration = 0 mol/L0\text{ mol/L} for both

  4. Step 4

    Conductivity ranking: Solution 2 = Solution 3 < Solution 1

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molarities of all three solutions from three different concentration units.

You correctly classified glucose and urea as non-electrolytes with zero ion concentration.

You correctly established that conductivity depends on the presence of mobile ions and ranked the solutions accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dissociation Stoichiometry

You equated the ion concentration of copper(II) chloride directly to its molarity instead of accounting for complete dissociation into multiple ions.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the stoichiometric coefficients of ionic dissociation: soluble salts dissociate into individual cations and anions, so total mobile ion concentration equals salt molarity multiplied by the total number of ions per formula unit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the Dissociation Equation
  • For a strong electrolyte AXx BXy(s)→x AXy+(aq)+y BXx−(aq)\ce{A_x B_y(s) -> x A^{y+}(aq) + y B^{x-}(aq)}, one mole of formula unit yields (x+y)(x + y) moles of ions.

  • Always write out the complete balanced dissociation equation before summing ion concentrations.

Calculate Total Ion Concentration
  • [Total ions]=(x+y)×[AXx BXy][\text{Total ions}] = (x + y) \times [\ce{A_x B_y}].

  • Multiply the salt's molarity by the sum of cation and anion subscripts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the dissociation reaction: CuClX2(aq)→CuX2+(aq)+2 ClX−(aq)\ce{CuCl2(aq) -> Cu^2+(aq) + 2 Cl^-(aq)}.

  2. Find the individual ion concentrations: [CuX2+]=0.0112 M[\ce{Cu^2+}] = 0.0112\text{ M} and [ClX−]=2×0.0112 M=0.0224 M[\ce{Cl^-}] = 2 \times 0.0112\text{ M} = 0.0224\text{ M}.

  3. Sum the concentrations to obtain total mobile ions: [Total ions]=0.0112 M+0.0224 M=0.0336 M[\text{Total ions}] = 0.0112\text{ M} + 0.0224\text{ M} = 0.0336\text{ M} (or 3.36×10−2 M3.36 \times 10^{-2}\text{ M}).

Final answer

(a) Solution 1: 1.12×10−2 M1.12 \times 10^{-2}\text{ M}; Solution 2: 2.50×10−2 M2.50 \times 10^{-2}\text{ M}; Solution 3: 2.33×10−2 M2.33 \times 10^{-2}\text{ M}. (b) Total ion concentration: Solution 1: 3.36×10−2 M3.36 \times 10^{-2}\text{ M}; Solution 2: 0 M0\text{ M}; Solution 3: 0 M0\text{ M}. Conductivity: Solution 2≈Solution 3<Solution 1\text{Solution 2} \approx \text{Solution 3} < \text{Solution 1}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing dissociation equations for multi-ion salts such as NaX2SOX4\ce{Na2SO4}, FeClX3\ce{FeCl3}, and AlX2(SOX4)X3\ce{Al2(SO4)3}.

  • Remember to distinguish between total solute molarity and total dissolved particle or ion molarity.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets 1500 ppm as 1500 mg per 100 mL or forgets the factor of 1000 when converting ppm in aqueous solution, resulting in an incorrect molarity for Solution 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Solution 1: 1500 ppm=1500 mg/1000 g=1.50 g in 1000 mL=1.50 g/L  ⟹  M1=(1.50 g/L)/(134.45 g/mol)=0.0112 mol/L1500\text{ ppm} = 1500\text{ mg}/1000\text{ g} = 1.50\text{ g}\text{ in }1000\text{ mL} = 1.50\text{ g}/\text{L} \implies M_1 = (1.50\text{ g}/\text{L}) / (134.45\text{ g}/\text{mol}) = 0.0112\text{ mol}/\text{L}; Solution 2: 25.0 mmol/L=0.0250 mol/L25.0\text{ mmol}/\text{L} = 0.0250\text{ mol}/\text{L}; Solution 3: 350 mg=0.350 g  ⟹  M3=(0.350 g/(60.06 g/mol))/0.2500 L=0.0233 mol/L350\text{ mg} = 0.350\text{ g} \implies M_3 = (0.350\text{ g} / (60.06\text{ g}/\text{mol})) / 0.2500\text{ L} = 0.0233\text{ mol}/\text{L}

  2. Step 2

    CuClX2\ce{CuCl2} dissociates into CuX2++2 ClX−\ce{Cu^2+ + 2Cl-} (3 ions)   ⟹  \implies Ion concentration for Solution 1 =3×0.0112 mol/L=0.0335 mol/L= 3 \times 0.0112\text{ mol}/\text{L} = 0.0335\text{ mol}/\text{L}

  3. Step 3

    Glucose and urea are assumed to conduct electricity based on molarity: Solution 2 =0.0250 mol/L= 0.0250\text{ mol}/\text{L}, Solution 3 =0.0233 mol/L= 0.0233\text{ mol}/\text{L}

    Correct

    [Total ions]Solution 2=0 M[\text{Total ions}]_{\text{Solution 2}} = 0\text{ M}, [Total ions]Solution 3=0 M[\text{Total ions}]_{\text{Solution 3}} = 0\text{ M}

    Glucose and urea are neutral molecular compounds held together by covalent bonds. When they dissolve in water, they disperse as neutral intact molecules rather than dissociating into ions, so their mobile ion concentration is 0 M0\text{ M}.

  4. Step 4

    Conductivity ranking: Solution 3<Solution 2<Solution 1\text{Solution 3} < \text{Solution 2} < \text{Solution 1}

    Correct

    Solution 2≈Solution 3<Solution 1\text{Solution 2} \approx \text{Solution 3} < \text{Solution 1}

    Because neither glucose nor urea produces mobile ions, both solutions are essentially non-conductive, making their electrical conductivities essentially equal and significantly lower than the conductive ionic copper(II) chloride solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You handled the unit conversions from parts per million (ppm), millimoles per liter, and milligrams accurately to find each solution's molarity.

You correctly identified copper(II) chloride as a strong electrolyte that dissociates into three mobile ions per formula unit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Non-electrolyte molecular solutes mistaken for charge carriers

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated dissolved solute molarity with mobile charge carrier concentration, overlooking that neutral covalent molecular compounds remain intact in solution and do not conduct electricity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Electrolyte Classification
  • Soluble ionic compounds dissociate into mobile cations and anions (strong electrolytes), whereas soluble neutral covalent molecular compounds (such as sugars, alcohols, and urea) dissolve as intact neutral molecules (non-electrolytes).

  • Always classify the solute bonding type before evaluating conductivity: if the solute is a neutral molecular compound with no ionizable groups, set its mobile ion concentration to 0 M0\text{ M}.

Conductivity Requirement
  • Aqueous electrical conductivity requires mobile charged particles (ions). Uncharged molecular species cannot carry an electric current.

  • Rank electrical conductivity strictly by the total concentration of freely moving ions, not by the total concentration of dissolved neutral molecules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that D-glucose (CX6HX12OX6\ce{C6H12O6}) and urea ((NHX2)2CO(\ce{NH2})_2\ce{CO}) are molecular substances made entirely of nonmetals bonded covalently.

  2. State that dissolving them in water releases neutral molecules, giving [Total ions]=0 M[\text{Total ions}] = 0\text{ M} for both Solution 2 and Solution 3.

  3. Conclude that Solutions 2 and 3 are non-electrolytes with negligible conductivity, while Solution 1 conducts electricity via its 3.36×10−2 M3.36 \times 10^{-2}\text{ M} mobile ions.

Final answer

Total ion concentrations: Solution 1: 3.36×10−2 M3.36 \times 10^{-2}\text{ M}; Solution 2: 0 M0\text{ M}; Solution 3: 0 M0\text{ M}. Conductivity ranking: Solution 2≈Solution 3<Solution 1\text{Solution 2} \approx \text{Solution 3} < \text{Solution 1}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice categorizing solutes as strong electrolytes, weak electrolytes, or non-electrolytes based on chemical formula and bond type.

  • Remember that conductivity depends on the concentration and charge of mobile ions, not the total moles of dissolved neutral solute molecules.

OverviewACEpath Teacher's Diagnosis

03 The student assumes all dissolved molecular solutes dissociate into ions like electrolytes, assigning each molecular solute an ion concentration equal to its molarity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Solution 1: 1500 ppm=1.500 g/L  ⟹  M1=1.500 g/L134.45 g/mol=0.0112 mol/L\text{Solution 1: } 1500\text{ ppm} = 1.500\text{ g/L} \implies M_1 = \frac{1.500\text{ g/L}}{134.45\text{ g/mol}} = 0.0112\text{ mol/L}; Solution 2: M2=0.0250 mol/L\text{Solution 2: } M_2 = 0.0250\text{ mol/L}; Solution 3: M3=0.350 g60.06 g/mol0.2500 L=0.0233 mol/L\text{Solution 3: } M_3 = \frac{\frac{0.350\text{ g}}{60.06\text{ g/mol}}}{0.2500\text{ L}} = 0.0233\text{ mol/L}

  2. Step 2

    CuCl2 splits into Cu2++2Cl−, so ions=3×0.0112 mol/L=0.0336 mol/L\text{CuCl}_2\text{ splits into } \text{Cu}^{2+} + 2\text{Cl}^-,\text{ so ions} = 3 \times 0.0112\text{ mol/L} = 0.0336\text{ mol/L}

  3. Step 3

    Assume glucose and urea each produce 1 mol of ions per mol of solute  ⟹  [ions]2=0.0250 mol/L, [ions]3=0.0233 mol/L\text{Assume glucose and urea each produce 1 mol of ions per mol of solute} \implies [\text{ions}]_2 = 0.0250\text{ mol/L},\ [\text{ions}]_3 = 0.0233\text{ mol/L}

    Correct

    [Total ions]2=0 M[\text{Total ions}]_2 = 0\text{ M} and [Total ions]3=0 M[\text{Total ions}]_3 = 0\text{ M}

    D-glucose (C6H12O6\text{C}_6\text{H}_{12}\text{O}_6) and urea ((NH2)2CO(\text{NH}_2)_2\text{CO}) are molecular substances composed entirely of nonmetals bonded covalently. When they dissolve in water, their intermolecular attractions are replaced by hydrogen bonding with water molecules, but their covalent bonds remain intact. They dissolve as neutral, intact molecules (non-electrolytes) and do not produce mobile ions.

  4. Step 4

    Conductivity ranking: Solution 3<Solution 2<Solution 1\text{Conductivity ranking: Solution 3} < \text{Solution 2} < \text{Solution 1}

    Correct

    Solution 2≈Solution 3<Solution 1\text{Solution 2} \approx \text{Solution 3} < \text{Solution 1}

    Because your ion concentrations for Solutions 2 and 3 were non-zero, you ranked their conductivities based on molecular molarity. In reality, both Solutions 2 and 3 have no mobile ions and therefore have essentially zero conductivity, making their conductivities approximately equal and much lower than that of Solution 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You handled all unit conversions to molarity (MM) flawlessly.

You correctly identified CuCl2\text{CuCl}_2 as an ionic compound and accounted for its van 't Hoff factor of i=3i = 3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electrolyte vs. Non-electrolyte Dissolution

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated dissolution with ionic dissociation, assuming that every dissolved chemical entity forms mobile charge carriers in aqueous solution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Bonding Type Classification
  • Ionic compounds (metal + nonmetal or polyatomic ions) generally dissociate into cations and anions in water (electrolytes). Molecular compounds (neutral nonmetal combinations like sugars, alcohols, and amides) dissolve as intact neutral molecules (non-electrolytes).

  • Check the constituent elements of each solute before writing dissociation equations; if the compound contains only covalently bonded nonmetals and is not an acid or weak base, set the mobile ion concentration to 0 M0\text{ M}.

Basis of Solution Conductivity
  • Electrical conductivity in liquids requires freely moving charged particles (ions). Uncharged dissolved molecules do not carry electric current.

  • Rank conductivity strictly according to the total concentration of mobile ions [ions]=∑i⋅M[\text{ions}] = \sum i \cdot M, ignoring neutral molecular solutes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that glucose (C6H12O6\text{C}_6\text{H}_{12}\text{O}_6) and urea ((NH2)2CO(\text{NH}_2)_2\text{CO}) are molecular non-electrolytes: [ions]glucose=0 M[\text{ions}]_{\text{glucose}} = 0\text{ M} and [ions]urea=0 M[\text{ions}]_{\text{urea}} = 0\text{ M}.

  2. Identify Solution 1 as the only solution containing mobile charge carriers: [ions]1=[Cu2+]+[Cl−]=0.0112 M+0.0224 M=0.0336 M[\text{ions}]_1 = [\text{Cu}^{2+}] + [\text{Cl}^-] = 0.0112\text{ M} + 0.0224\text{ M} = 0.0336\text{ M}.

  3. Compare the mobile ion concentrations to rank electrical conductivity: Solutions 2 and 3 both contain 0 M0\text{ M} ions, so their conductivities are negligible and equal, while Solution 1 has a high ion concentration.

Final answer

(a) Solution 1: 1.12×10−2 M1.12 \times 10^{-2}\text{ M}; Solution 2: 2.50×10−2 M2.50 \times 10^{-2}\text{ M}; Solution 3: 2.33×10−2 M2.33 \times 10^{-2}\text{ M}. (b) Total ion concentration: Solution 1: 3.36×10−2 M3.36 \times 10^{-2}\text{ M}; Solution 2: 0 M0\text{ M}; Solution 3: 0 M0\text{ M}. Conductivity ranking: Solution 2≈Solution 3<Solution 1\text{Solution 2} \approx \text{Solution 3} < \text{Solution 1}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between dissolution (solvation of individual particles) and dissociation (separation of a compound into constituent ions).

  • Practice classifying solutes as strong electrolytes, weak electrolytes, or non-electrolytes based on chemical formula.

Lock it in

Similar question

01

A solution is prepared by dissolving 0.040 mol0.040\text{ mol} of iron(III) chloride (FeClX3\ce{FeCl3}) in water to make 500.0 mL500.0\text{ mL} of solution. Assuming complete dissociation, calculate: (a) the molarity of the salt, and (b) the total concentration of mobile ions.

Answer

(a) Molarity =0.040 mol0.5000 L=0.080 M FeClX3= \frac{0.040\text{ mol}}{0.5000\text{ L}} = 0.080\text{ M } \ce{FeCl3}. (b) FeClX3→FeX3++3 ClX−\ce{FeCl3 -> Fe^3+ + 3 Cl^-} produces 4 ions per unit, so [Total ions]=4×0.080 M=0.32 M[\text{Total ions}] = 4 \times 0.080\text{ M} = 0.32\text{ M}.

02

Consider two aqueous solutions: Solution A is 0.030 M NaX2SOX40.030\text{ M } \ce{Na2SO4} and Solution B is 0.040 M NaCl0.040\text{ M } \ce{NaCl}. (a) Calculate the total mobile ion concentration in each solution. (b) Predict which solution has higher electrical conductivity.

Answer

(a) For Solution A: NaX2SOX4→2 NaX++SOX4X2−\ce{Na2SO4 -> 2 Na^+ + SO4^2-} (33 ions), so [ions]=3×0.030 M=0.090 M[\text{ions}] = 3 \times 0.030\text{ M} = 0.090\text{ M}. For Solution B: NaCl→NaX++ClX−\ce{NaCl -> Na^+ + Cl^-} (22 ions), so [ions]=2×0.040 M=0.080 M[\text{ions}] = 2 \times 0.040\text{ M} = 0.080\text{ M}. (b) Solution A has higher conductivity because it has a greater concentration of mobile charge carriers (0.090 M>0.080 M0.090\text{ M} > 0.080\text{ M}).

03

A beaker contains a mixture of 100.0 mL100.0\text{ mL} of 0.020 M MgClX20.020\text{ M } \ce{MgCl2} and 100.0 mL100.0\text{ mL} of 0.050 M0.050\text{ M} sucrose (CX12HX22OX11\ce{C12H22O11}). Assuming additive volumes, find: (a) the molarity of sucrose in the mixture, (b) the total concentration of mobile ions in the mixture, and (c) the total particle concentration (ions plus molecules).

Answer

(a) Dilution factor is 22: [extsucrose]=0.050 M2=0.025 M[ ext{sucrose}] = \frac{0.050\text{ M}}{2} = 0.025\text{ M}. (b) Diluted [MgClX2]=0.010 M[\ce{MgCl2}] = 0.010\text{ M}; dissociation yields MgX2++2 ClX−\ce{Mg^2+ + 2 Cl^-} (33 ions), so [Total ions]=3×0.010 M=0.030 M[\text{Total ions}] = 3 \times 0.010\text{ M} = 0.030\text{ M}. (c) Total particle concentration =0.030 M (ions)+0.025 M (molecules)=0.055 M= 0.030\text{ M (ions)} + 0.025\text{ M (molecules)} = 0.055\text{ M}.

Loading workspace…