Resources
A weather balloon containing of helium at ground level where and ascends into the stratosphere. First, it reaches an intermediate altitude where the temperature drops to at constant pressure (). Then, keeping this new temperature constant, the balloon expands into lower-pressure air until the external pressure drops to . Calculate the final volume of the balloon in liters after both consecutive processes.
Answer and steps
Final answer
Steps
Convert Temperatures to the Kelvin Scale
Gas laws require absolute temperatures in Kelvin ():
Common Pitfall: Never use temperatures in Celsius directly in gas law proportions, as the Celsius scale is not an absolute scale and will lead to incorrect volume ratios.
Calculate the Volume After Isobaric Cooling (Charles's Law)
During the first process, the pressure remains constant at while the temperature decreases from to . According to Charles's Law, volume is directly proportional to absolute temperature:
Rearranging to solve for the intermediate volume :
Calculate the Final Volume After Isothermal Expansion (Boyle's Law)
In the second process, the temperature remains constant at while the pressure drops from to . According to Boyle's Law, volume is inversely proportional to pressure:
Rearranging to solve for the final volume :
Alternative Method: The Combined Gas Law
Because the amount of gas remains constant throughout both stages, you can also solve for the final state directly in one step:
Typical errors
01 The student uses temperatures in Celsius directly in the gas law equation instead of converting to Kelvin, resulting in a negative volume.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted the temperatures directly in Celsius ( and ). Gas laws describe proportional relationships based on absolute thermal energy, so all temperatures must be converted to the Kelvin scale before computing ratios.
- Step 3Correct
Your arithmetic correctly followed your substituted numbers, but evaluating the negative temperature ratio yielded a negative final volume.
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that the amount of gas remains constant and selected the Combined Gas Law.
You rearranged the equation accurately to solve for the final volume.
You paired the initial and final pressures with their corresponding states correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou forgot to add to convert both Celsius temperatures to Kelvin before substituting them into the equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that gas volume is directly proportional to absolute thermodynamic temperature ( in Kelvin), not relative temperature on the arbitrary Celsius scale where negative values can occur.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute Temperature Requirement
In all ideal gas law equations (, Charles's Law, Combined Gas Law), temperature must always be in Kelvin: .
Convert every given temperature to Kelvin as your first step before writing or rearranging the gas formulas.
- Physical Reality Check
A gas volume can never be negative or zero under realistic conditions ().
If your calculated volume or pressure is negative, immediately check whether you used a negative Celsius temperature instead of Kelvin.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate initial temperature in Kelvin: .
Calculate final temperature in Kelvin: .
Substitute the absolute temperatures and pressures into your rearranged formula: .
Simplify the pressure and temperature ratios: .
02 The student inverts the temperature ratio by incorrectly assuming volume is inversely proportional to absolute temperature.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
From the combined gas law , isolating requires multiplying both sides by and dividing by , which gives a temperature factor of . Because gas volume is directly proportional to absolute temperature (Charles's law), cooling the gas from to must decrease the volume, requiring the temperature ratio to be less than .
- Step 3Correct
Your arithmetic was carried out accurately using your written formula, but the result is incorrect due to the inverted temperature ratio in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted both given temperatures from degrees Celsius to Kelvin.
You correctly identified and applied the inverse pressure ratio for the expansion.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated volume as inversely proportional to temperature rather than directly proportional when rearranging the combined gas law, placing in the numerator and in the denominator.
REASONING PATH
Your ACEpath teacher’s suggested approach- Algebraic Isolation Check
Starting from , multiply both sides by to isolate .
Always write the base equation explicitly before rearranging, and cross-multiply to verify: .
- Physical Reality Check (Charles's Law)
At constant pressure, gas volume is directly proportional to absolute temperature (). Cooling a gas must make it contract.
Before computing, verify that if drops (), the temperature multiplier is less than .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the combined gas law:
Solve algebraically for :
Substitute the known values:
Calculate the final volume:
03 The student inverts the pressure ratio when applying Boyle's law, treating pressure and volume as directly proportional.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You inverted the pressure ratio. In the combined gas law, , solving for gives because pressure and volume are inversely proportional (Boyle's law).
- Step 3Correct
Your arithmetic was carried out accurately based on your algebraic formula, but the result is incorrect because of the inverted pressure ratio.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the need for absolute temperature and converted both temperatures to Kelvin.
You recognized that the combined gas law relates the initial and final states of the gas sample.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up the pressure ratio as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated pressure and volume as if they are directly proportional rather than inversely proportional when rearranging .
REASONING PATH
Your ACEpath teacher’s suggested approach- Boyle's Law Proportionality Check
Pressure and volume are inversely proportional at constant temperature ().
When external pressure drops, the gas must expand (), which means the pressure multiplier must be greater than , or .
- Algebraic Isolation Check
To isolate from , multiply both sides by .
Verify that terms on the same side in the numerator move to the denominator on the opposite side: .
CORRECTED PATH
ACEpath Teacher's DemonstrationStart from the combined gas law: .
Isolate by multiplying both sides by : .
Substitute the given values: .
Evaluate the factors: .
Lock it in
Why must temperatures always be expressed in Kelvin rather than Celsius in gas law equations?
Gas laws depend on absolute kinetic energy (), which is zero only at absolute zero (). Using Celsius introduces an arbitrary zero offset and can cause nonsensical zero or negative volumes.
Similar question
A sample of nitrogen gas occupies at . If the gas is cooled to at constant pressure, what is its new volume?
Answer
. Convert temperatures: , . Apply Charles's Law: .
A weather balloon has an initial volume of at and . It ascends to an altitude where the pressure is and the temperature is . Calculate its new volume.
Answer
. Convert temperatures: , . Use the Combined Gas Law: .
A flexible container holds of gas at and . The gas is compressed to while being cooled until the pressure reaches . What is the final temperature of the gas in degrees Celsius?
Answer
. Convert initial temperature: . Rearrange the Combined Gas Law for : . Convert back to Celsius: .