Resources

An analytical chemistry student performs an experimental potentiometric titration to determine the concentration of an unknown iron(II) sulfate solution. The electrochemical setup consists of a saturated calomel reference electrode (SCE, E=+0.244 VE = +0.244\text{ V} vs. SHE) and a platinum indicator electrode immersed in 25.00 mL25.00\text{ mL} of the analyte solution. The analyte is titrated with standard 0.0500 M Ce4+(aq)0.0500\text{ M } \text{Ce}^{4+}(aq) according to: Fe2+(aq)+Ce4+(aq)→Fe3+(aq)+Ce3+(aq)\text{Fe}^{2+}(aq) + \text{Ce}^{4+}(aq) \rightarrow \text{Fe}^{3+}(aq) + \text{Ce}^{3+}(aq). At the halfway point to the equivalence point (Vtitrant=10.00 mLV_{\text{titrant}} = 10.00\text{ mL}), the potential of the platinum electrode is measured to be +0.771 V+0.771\text{ V} vs. SHE. Given E∘(Fe3+/Fe2+)=+0.771 VE^\circ(\text{Fe}^{3+}/\text{Fe}^{2+}) = +0.771\text{ V} and ESCE=+0.244 VE_{\text{SCE}} = +0.244\text{ V}: (a) Identify which electrode acts as the cathode and which acts as the anode during this measurement. (b) Specify the direction of electron flow through the external voltmeter. (c) Determine the measured cell potential difference Ecell=Eindicator−EreferenceE_{\text{cell}} = E_{\text{indicator}} - E_{\text{reference}}. (d) Calculate the original molarity of the unknown Fe2+\text{Fe}^{2+} solution.

Answer and steps

Final answer

(a) Cathode: Platinum indicator electrode (E=+0.771 VE = +0.771\text{ V}), Anode: Saturated calomel electrode (E=+0.244 VE = +0.244\text{ V}); (b) Electrons flow externally from the SCE (anode) to the Pt indicator electrode (cathode); (c) Ecell=+0.527 VE_{\text{cell}} = +0.527\text{ V}; (d) [extFe2+]0=0.0400 M[ ext{Fe}^{2+}]_0 = 0.0400\text{ M} (equivalence volume is 20.00 mL20.00\text{ mL}).

Steps

Part (a): Identifying the Cathode and Anode

In a potentiometric electrochemical cell, standard reduction potentials dictate the identity of the electrodes:

  • The electrode with the higher (more positive) reduction potential has a greater tendency to gain electrons and undergoes reduction, functioning as the cathode.
  • The electrode with the lower (less positive) reduction potential undergoes oxidation, functioning as the anode.

Comparing the two potentials: Eindicator=+0.771 V vs. SHEE_{\text{indicator}} = +0.771\text{ V vs. SHE} Ereference(SCE)=+0.244 V vs. SHEE_{\text{reference}} (\text{SCE}) = +0.244\text{ V vs. SHE}

Because +0.771 V>+0.244 V+0.771\text{ V} > +0.244\text{ V}:

  • Cathode: Platinum indicator electrode (E=+0.771 VE = +0.771\text{ V})
  • Anode: Saturated calomel electrode (SCE, E=+0.244 VE = +0.244\text{ V})

Part (b): Determining External Electron Flow

Electrons flow spontaneously through the external circuit from the site of oxidation (anode, where electrons are released) to the site of reduction (cathode, where electrons are consumed):

  • Direction of electron flow: Externally from the SCE (anode) to the platinum indicator electrode (cathode).

Part (c): Calculating the Cell Potential Difference

The measured potential difference between the indicator electrode and the reference electrode is given by: Ecell=Eindicator−EreferenceE_{\text{cell}} = E_{\text{indicator}} - E_{\text{reference}}

Substitute the given potentials: Ecell=+0.771 V−(+0.244 V)=+0.527 VE_{\text{cell}} = +0.771\text{ V} - (+0.244\text{ V}) = +0.527\text{ V}


Part (d): Calculating the Original Molarity of the FeX2+\ce{Fe^{2+}} Solution

  1. Find the equivalence volume (VeqV_{\text{eq}}):
    The titration involves the 1:11:1 redox reaction: FeX2+(aq)+CeX4+(aq)→FeX3+(aq)+CeX3+(aq)\ce{Fe^{2+}(aq) + Ce^{4+}(aq) -> Fe^{3+}(aq) + Ce^{3+}(aq)} The halfway point to the equivalence point occurs when half of the initial FeX2+\ce{Fe^{2+}} has been oxidized. Therefore: Veq=2⋅V1/2=2⋅10.00 mL=20.00 mL=0.02000 LV_{\text{eq}} = 2 \cdot V_{1/2} = 2 \cdot 10.00\text{ mL} = 20.00\text{ mL} = 0.02000\text{ L}
  2. Calculate the moles of CeX4+\ce{Ce^{4+}} added at the equivalence point: nCeX4+=MCeX4+⋅Veq=(0.0500 M)⋅(0.02000 L)=1.00×10−3 moln_{\ce{Ce^{4+}}} = M_{\ce{Ce^{4+}}} \cdot V_{\text{eq}} = (0.0500\text{ M}) \cdot (0.02000\text{ L}) = 1.00 \times 10^{-3}\text{ mol}
  3. Determine the original concentration of FeX2+\ce{Fe^{2+}}:
    Because the stoichiometric ratio is 1:11:1, the initial moles of FeX2+\ce{Fe^{2+}} equal nCeX4+n_{\ce{Ce^{4+}}}: nFeX2+=1.00×10−3 moln_{\ce{Fe^{2+}}} = 1.00 \times 10^{-3}\text{ mol} [FeX2+]0=nFeX2+Vanalyte=1.00×10−3 mol0.02500 L=0.0400 M[\ce{Fe^{2+}}]_0 = \frac{n_{\ce{Fe^{2+}}}}{V_{\text{analyte}}} = \frac{1.00 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.0400\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the halfway volume with the equivalence volume when calculating the unknown concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Platinum electrode is the cathode and SCE is the anode.

  2. Step 2

    Electrons flow from SCE to platinum.

  3. Step 3

    Ecell=0.771 V−0.244 V=+0.527 VE_{\text{cell}} = 0.771\text{ V} - 0.244\text{ V} = +0.527\text{ V}

  4. Step 4

    Veq=10.00 mLV_{eq} = 10.00\text{ mL}

    Correct

    Veq=2×V1/2=2×10.00 mL=20.00 mLV_{\text{eq}} = 2 \times V_{1/2} = 2 \times 10.00\text{ mL} = 20.00\text{ mL}

    The problem states that 10.00 mL10.00\text{ mL} is the volume at the halfway point to the equivalence point (V1/2V_{1/2}). The equivalence volume requires twice this volume, so Veq=20.00 mLV_{\text{eq}} = 20.00\text{ mL}.

  5. Step 5

    M(Fe2+)×25.00 mL=0.0500 M×10.00 mL  ⟹  M(Fe2+)=0.0200 MM(\text{Fe}^{2+}) \times 25.00\text{ mL} = 0.0500\text{ M} \times 10.00\text{ mL} \implies M(\text{Fe}^{2+}) = 0.0200\text{ M}

    Correct

    M(Fe2+)=0.0500 M×20.00 mL25.00 mL=0.0400 MM(\text{Fe}^{2+}) = \frac{0.0500\text{ M} \times 20.00\text{ mL}}{25.00\text{ mL}} = 0.0400\text{ M}

    Your stoichiometry and molarity calculation formula were set up correctly, but the numerical answer was affected by using V=10.00 mLV = 10.00\text{ mL} instead of the true equivalence volume Veq=20.00 mLV_{\text{eq}} = 20.00\text{ mL}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned the cathode and anode based on their relative reduction potentials.

You correctly traced the direction of external electron flow from anode to cathode.

You accurately computed the cell potential difference.

You applied the correct stoichiometric relation (M1V1=M2V2M_1 V_1 = M_2 V_2) to solve for the unknown concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Halfway vs. Equivalence Point Confusion

You equated the given volume at the halfway potential (V1/2=10.00 mLV_{1/2} = 10.00\text{ mL}) directly to the equivalence volume VeqV_{\text{eq}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that at the halfway point, only half of the initial analyte has reacted with the titrant, meaning the stoichiometric equivalence point requires Veq=2⋅V1/2V_{\text{eq}} = 2 \cdot V_{1/2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Halfway Point vs. Equivalence Point
  • For a symmetrical 1:11:1 redox titration, the halfway point occurs when [extreduced]=[extoxidized][ ext{reduced}] = [ ext{oxidized}], which requires exactly half of the titrant volume needed to reach equivalence (V1/2=12VeqV_{1/2} = \frac{1}{2}V_{\text{eq}}).

  • Whenever a potentiometric titration provides data at the halfway point, always double that volume (Veq=2V1/2V_{\text{eq}} = 2 V_{1/2}) before calculating analyte moles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that Vtitrant=10.00 mLV_{\text{titrant}} = 10.00\text{ mL} corresponds to the halfway point (V1/2V_{1/2}).

  2. Calculate the full equivalence volume: Veq=2×10.00 mL=20.00 mLV_{\text{eq}} = 2 \times 10.00\text{ mL} = 20.00\text{ mL}.

  3. Calculate moles of CeX4+\ce{Ce^{4+}} added at equivalence: n=(0.0500 M)(0.02000 L)=1.00×10−3 moln = (0.0500\text{ M})(0.02000\text{ L}) = 1.00 \times 10^{-3}\text{ mol}.

  4. Determine the initial molarity of FeX2+\ce{Fe^{2+}}: [FeX2+]0=1.00×10−3 mol0.02500 L=0.0400 M[\ce{Fe^{2+}}]_0 = \frac{1.00 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.0400\text{ M}.

Final answer

(a) Cathode: Pt electrode, Anode: SCE; (b) SCE →\rightarrow Pt; (c) Ecell=+0.527 VE_{\text{cell}} = +0.527\text{ V}; (d) [FeX2+]0=0.0400 M[\ce{Fe^{2+}}]_0 = 0.0400\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check titration prompts to ensure whether a given volume represents the equivalence point or a fractional point (such as halfway to equivalence).

  • Practice sketching a titration curve (EE vs. VV) to visually distinguish V1/2V_{1/2} (where E=E∘E = E^\circ) from VeqV_{\text{eq}} (the steepest inflection point).

OverviewACEpath Teacher's Diagnosis

02 The student reverses cathode and anode designations by incorrectly assigning oxidation to the higher potential electrode, leading to an inverted electron flow.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Platinum electrode is the anode and SCE is the cathode.

    Correct

    Cathode: Platinum indicator electrode (E=+0.771 VE = +0.771\text{ V}); Anode: Saturated calomel electrode (SCE, E=+0.244 VE = +0.244\text{ V})

    The electrode with the more positive reduction potential (+0.771 V>+0.244 V+0.771\text{ V} > +0.244\text{ V}) has a greater tendency to gain electrons (reduction), making the platinum indicator electrode the cathode and the SCE the anode.

  2. Step 2

    Electrons flow from platinum to SCE.

    Correct

    Electrons flow from the SCE (anode) to the platinum indicator electrode (cathode).

    Electrons always flow spontaneously through the external circuit from the site of oxidation (anode) to the site of reduction (cathode). Because the SCE is the anode, electrons flow from the SCE toward the platinum electrode.

  3. Step 3

    Ecell=0.771 V−0.244 V=+0.527 VE_{\text{cell}} = 0.771\text{ V} - 0.244\text{ V} = +0.527\text{ V}

  4. Step 4

    Veq=2×10.00 mL=20.00 mL  ⟹  M(Fe2+)=0.0500 M×20.00 mL25.00 mL=0.0400 MV_{\text{eq}} = 2 \times 10.00\text{ mL} = 20.00\text{ mL} \implies M(\text{Fe}^{2+}) = \frac{0.0500\text{ M} \times 20.00\text{ mL}}{25.00\text{ mL}} = 0.0400\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the cell potential difference as +0.527 V+0.527\text{ V}.

You correctly recognized that the equivalence point volume is twice the half-equivalence volume.

You successfully calculated the initial molarity of the Fe2+\text{Fe}^{2+} solution using 1:11:1 stoichiometry.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Cathode/Anode Assignment

You assigned the electrode with the higher reduction potential to be the anode rather than the cathode.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating reduction potential magnitude with oxidation tendency: the half-cell with the more positive potential has a stronger drive to gain electrons (reduction at the cathode), while the less positive half-cell loses electrons (oxidation at the anode).

REASONING PATH
Your ACEpath teacher’s suggested approach
Cathode vs. Anode by Potential
  • In a spontaneous cell, the electrode with the higher (more positive) reduction potential undergoes reduction and acts as the cathode (Ecathode>EanodeE_{\text{cathode}} > E_{\text{anode}}).

  • Compare EE values first: assign 'cathode' to the more positive value and 'anode' to the less positive value.

Direction of External Electron Flow
  • Electrons travel through the external circuit from the anode (oxidation site) to the cathode (reduction site).

  • Trace electron flow starting at the negative/lower-potential electrode (anode) toward the positive/higher-potential electrode (cathode).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the half-cell potentials: EPt=+0.771 VE_{\text{Pt}} = +0.771\text{ V} and ESCE=+0.244 VE_{\text{SCE}} = +0.244\text{ V}.

  2. Because +0.771 V>+0.244 V+0.771\text{ V} > +0.244\text{ V}, reduction occurs at the platinum electrode (cathode) and oxidation occurs at the SCE (anode).

  3. Electrons leave the site of oxidation (SCE) and flow through the wire/voltmeter into the site of reduction (platinum).

Final answer

(a) Cathode: Platinum indicator electrode, Anode: Saturated calomel electrode (SCE); (b) Externally from SCE to platinum indicator electrode

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mnemonic 'An Ox and Red Cat' (Anode = Oxidation, Reduction = Cathode) alongside standard reduction potentials.

  • Practice identifying electrode roles in mixed reference-electrode potentiometric cells before tracing external circuit currents.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts the indicator electrode potential from the reference potential, yielding a negative cell potential difference.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Platinum electrode is the cathode and SCE is the anode.

  2. Step 2

    Electrons flow from SCE to platinum.

  3. Step 3

    Ecell=0.244 V−0.771 V=−0.527 VE_{\text{cell}} = 0.244\text{ V} - 0.771\text{ V} = -0.527\text{ V}

    Correct

    Ecell=Eindicator−Ereference=+0.771 V−(+0.244 V)=+0.527 VE_{\text{cell}} = E_{\text{indicator}} - E_{\text{reference}} = +0.771\text{ V} - (+0.244\text{ V}) = +0.527\text{ V}

    You subtracted the indicator electrode potential from the reference electrode potential (Ereference−EindicatorE_{\text{reference}} - E_{\text{indicator}}), reversing the convention defined in the problem.

  4. Step 4

    Veq=2×10.00 mL=20.00 mL  ⟹  M(Fe2+)=0.0500 M×20.00 mL25.00 mL=0.0400 MV_{\text{eq}} = 2 \times 10.00\text{ mL} = 20.00\text{ mL} \implies M(\text{Fe}^{2+}) = \frac{0.0500\text{ M} \times 20.00\text{ mL}}{25.00\text{ mL}} = 0.0400\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the platinum indicator electrode as the cathode and the SCE as the anode based on their reduction potentials.

You correctly determined that electrons flow externally from the SCE to the platinum indicator electrode.

You accurately calculated the equivalence volume and the original concentration of the Fe2+\text{Fe}^{2+} solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Potentiometric Potential Difference

You swapped the terms when computing the cell potential, evaluating Ereference−EindicatorE_{\text{reference}} - E_{\text{indicator}} rather than Eindicator−EreferenceE_{\text{indicator}} - E_{\text{reference}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the standard sign convention for potentiometric measurements (Ecell=Eind−ErefE_{\text{cell}} = E_{\text{ind}} - E_{\text{ref}} or Ecathode−EanodeE_{\text{cathode}} - E_{\text{anode}}), subtracting the larger cathode potential from the smaller anode potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convention for Potentiometric Cell Potential
  • In potentiometry with an indicator and reference electrode, the measured potential is defined as Ecell=Eindicator−Ereference=Ecathode−EanodeE_{\text{cell}} = E_{\text{indicator}} - E_{\text{reference}} = E_{\text{cathode}} - E_{\text{anode}}.

  • Identify the indicator electrode (+0.771 V+0.771\text{ V}) and reference electrode (+0.244 V+0.244\text{ V}) before writing the subtraction: +0.771 V−(+0.244 V)=+0.527 V+0.771\text{ V} - (+0.244\text{ V}) = +0.527\text{ V}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the cell potential formula given in the problem: Ecell=Eindicator−EreferenceE_{\text{cell}} = E_{\text{indicator}} - E_{\text{reference}}.

  2. Substitute the measured potential of the platinum indicator electrode (Eindicator=+0.771 VE_{\text{indicator}} = +0.771\text{ V}) and the potential of the SCE (Ereference=+0.244 VE_{\text{reference}} = +0.244\text{ V}).

  3. Evaluate the difference: Ecell=+0.771 V−(+0.244 V)=+0.527 VE_{\text{cell}} = +0.771\text{ V} - (+0.244\text{ V}) = +0.527\text{ V}.

Final answer

Ecell=+0.527 VE_{\text{cell}} = +0.527\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the indicator electrode potential is placed first when applying Ecell=Eindicator−EreferenceE_{\text{cell}} = E_{\text{indicator}} - E_{\text{reference}}.

  • Verify that a galvanic cell configuration yields a positive cell potential (Ecell>0E_{\text{cell}} > 0).

  • Practice writing out the formula with explicit labels (EindE_{\text{ind}} and ErefE_{\text{ref}}) before plugging in numerical values.

Lock it in

Similar question

01

A 50.00 mL50.00\text{ mL} sample of an unknown SnX2+\ce{Sn^{2+}} solution is titrated with 0.1000 M FeX3+0.1000\text{ M } \ce{Fe^{3+}} according to SnX2++2 FeX3+→SnX4++2 FeX2+\ce{Sn^{2+} + 2Fe^{3+} -> Sn^{4+} + 2Fe^{2+}}. The half-equivalence point occurs at 12.50 mL12.50\text{ mL} of titrant. Calculate the original concentration of SnX2+\ce{Sn^{2+}}.

Answer

[SnX2+]0=0.02500 M[\ce{Sn^{2+}}]_0 = 0.02500\text{ M}. Key steps: Veq=2×12.50 mL=25.00 mLV_{\text{eq}} = 2 \times 12.50\text{ mL} = 25.00\text{ mL}. Moles of FeX3+=(0.1000 M)(0.02500 L)=2.500×10−3 mol\ce{Fe^{3+}} = (0.1000\text{ M})(0.02500\text{ L}) = 2.500 \times 10^{-3}\text{ mol}. From stoichiometry (1 mol SnX2+:2 mol FeX3+1\text{ mol } \ce{Sn^{2+}} : 2\text{ mol } \ce{Fe^{3+}}), moles of SnX2+=1.250×10−3 mol\ce{Sn^{2+}} = 1.250 \times 10^{-3}\text{ mol}. Thus, [SnX2+]0=1.250×10−3 mol0.05000 L=0.02500 M[\ce{Sn^{2+}}]_0 = \frac{1.250 \times 10^{-3}\text{ mol}}{0.05000\text{ L}} = 0.02500\text{ M}.

02

In a potentiometric titration of VX2+\ce{V^{2+}} with CeX4+\ce{Ce^{4+}} monitored with a saturated calomel electrode (ESCE=+0.244 VE_{\text{SCE}} = +0.244\text{ V}), the indicator electrode potential at half-equivalence is −0.255 V-0.255\text{ V} vs. SHE. (a) Which electrode is the anode at this point? (b) What is Ecell=Eindicator−EreferenceE_{\text{cell}} = E_{\text{indicator}} - E_{\text{reference}}?

Answer

(a) Anode: Platinum indicator electrode (−0.255 V<+0.244 V-0.255\text{ V} < +0.244\text{ V}, lower potential undergoes oxidation); (b) Ecell=−0.255 V−(+0.244 V)=−0.499 VE_{\text{cell}} = -0.255\text{ V} - (+0.244\text{ V}) = -0.499\text{ V}.

03

A 25.00 mL25.00\text{ mL} aliquot of FeX2+\ce{Fe^{2+}} is titrated with 0.0400 M MnOX4X−0.0400\text{ M } \ce{MnO4-} in acidic solution: 5FeX2++MnOX4X−+8HX+→5FeX3++MnX2++4HX2O5\ce{Fe^{2+}} + \ce{MnO4-} + 8\ce{H+} \rightarrow 5\ce{Fe^{3+}} + \ce{Mn^{2+}} + 4\ce{H2O}. If 8.00 mL8.00\text{ mL} of titrant is required to reach the halfway point, determine: (a) the equivalence volume VeqV_{\text{eq}}, and (b) the initial molarity of FeX2+\ce{Fe^{2+}}.

Answer

(a) Veq=2×8.00 mL=16.00 mLV_{\text{eq}} = 2 \times 8.00\text{ mL} = 16.00\text{ mL}. (b) [FeX2+]0=0.128 M[\ce{Fe^{2+}}]_0 = 0.128\text{ M}. Key steps: Moles of MnOX4X−=(0.0400 M)(0.01600 L)=6.40×10−4 mol\ce{MnO4-} = (0.0400\text{ M})(0.01600\text{ L}) = 6.40 \times 10^{-4}\text{ mol}. Moles of FeX2+=5×6.40×10−4 mol=3.20×10−3 mol\ce{Fe^{2+}} = 5 \times 6.40 \times 10^{-4}\text{ mol} = 3.20 \times 10^{-3}\text{ mol}. Concentration [FeX2+]0=3.20×10−3 mol0.02500 L=0.128 M[\ce{Fe^{2+}}]_0 = \frac{3.20 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.128\text{ M}.

Loading workspace…