Resources

In a standardized analytical chemistry laboratory titration, a digital burette is used to titrate a 25.00 mL25.00\text{ mL} aliquot of standard hydrochloric acid with 0.1042 M NaOH0.1042\text{ M}\text{ NaOH}. The initial burette reading is 1.15 mL1.15\text{ mL} and the final equivalence point reading is 24.85 mL24.85\text{ mL}. (a) Determine the delivered titrant volume in cubic meters (m3\text{m}^3) in standard scientific notation with four significant figures. (b) Calculate the absolute chemical amount of NaOH\text{NaOH} delivered in moles (mol\text{mol}) expressed in scientific notation.

Answer and steps

Final answer

(a) 2.370×10−5 m32.370 \times 10^{-5}\text{ m}^3; (b) 2.470×10−3 mol2.470 \times 10^{-3}\text{ mol}

Steps

Part (a): Determining Delivered Volume in m3\text{m}^3

  1. Calculate the volume delivered in milliliters (mL\text{mL}): The volume of titrant (NaOH\ce{NaOH}) dispensed from the burette is the difference between the final reading and the initial reading: V=Vfinal−Vinitial=24.85 mL−1.15 mL=23.70 mLV = V_{\text{final}} - V_{\text{initial}} = 24.85\text{ mL} - 1.15\text{ mL} = 23.70\text{ mL} Because subtraction retains precision to two decimal places, the value 23.70 mL23.70\text{ mL} has four significant figures.
  2. Convert the volume to the SI base unit of cubic meters (m3\text{m}^3): Recall the unit relationships between milliliters, liters, and cubic meters: 1 mL=10−3 L=1 cm31\text{ mL} = 10^{-3}\text{ L} = 1\text{ cm}^3 1 m3=(100 cm)3=106 cm3=106 mL1\text{ m}^3 = (100\text{ cm})^3 = 10^6\text{ cm}^3 = 10^6\text{ mL} Therefore, the conversion factor is: 1 mL=10−6 m31\text{ mL} = 10^{-6}\text{ m}^3
  3. Express in standard scientific notation: Multiply the volume by the conversion factor: V=23.70×10−6 m3=2.370×10−5 m3V = 23.70 \times 10^{-6}\text{ m}^3 = 2.370 \times 10^{-5}\text{ m}^3 This keeps all four significant figures, including the terminal zero.

Part (b): Calculating the Amount of NaOH\ce{NaOH} in Moles

  1. Relate concentration, volume, and molar amount: Molarity (MM) is defined as the amount of solute in moles per liter of solution (mol⋅L−1\text{mol}\cdot\text{L}^{-1}): n=C⋅VLn = C \cdot V_{\text{L}}
  2. Convert volume to liters (L\text{L}): VL=23.70 mL×10−3 L1 mL=2.370×10−2 LV_{\text{L}} = 23.70\text{ mL} \times \frac{10^{-3}\text{ L}}{1\text{ mL}} = 2.370 \times 10^{-2}\text{ L}
  3. Calculate the molar amount (nn): Using the given concentration of 0.1042 M0.1042\text{ M} (which has four significant figures): n=0.1042 mol⋅L−1×0.02370 L=2.46954×10−3 moln = 0.1042\text{ mol}\cdot\text{L}^{-1} \times 0.02370\text{ L} = 2.46954 \times 10^{-3}\text{ mol}
  4. Round to four significant figures: Rounding to four significant figures yields: n=2.470×10−3 moln = 2.470 \times 10^{-3}\text{ mol}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the metric conversion between milliliters and cubic meters by treating 1 m³ as 1000 mL instead of 10⁶ mL, resulting in an erroneous volume of 2.370 × 10⁻² m³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=24.85 mL−1.15 mL=23.70 mLV = 24.85\text{ mL} - 1.15\text{ mL} = 23.70\text{ mL}

  2. Step 2

    1 m3=1000 mL  ⟹  V=23.701000 m3=2.370×10−2 m31\text{ m}^3 = 1000\text{ mL} \implies V = \frac{23.70}{1000}\text{ m}^3 = 2.370 \times 10^{-2}\text{ m}^3

    Correct

    1 m3=106 mL  ⟹  V=23.70 mL×1 m3106 mL=2.370×10−5 m31\text{ m}^3 = 10^6\text{ mL} \implies V = 23.70\text{ mL} \times \frac{1\text{ m}^3}{10^6\text{ mL}} = 2.370 \times 10^{-5}\text{ m}^3

    You equated 1 m31\text{ m}^3 to 1000 mL1000\text{ mL}, which confuses liters with milliliters. Because 1 m3=1000 L1\text{ m}^3 = 1000\text{ L} and 1 L=1000 mL1\text{ L} = 1000\text{ mL}, 1 m31\text{ m}^3 is equal to 106 mL10^6\text{ mL} (or 1 mL=10−6 m31\text{ mL} = 10^{-6}\text{ m}^3).

  3. Step 3

    V=23.70 mL=0.02370 LV = 23.70\text{ mL} = 0.02370\text{ L}

  4. Step 4

    n(NaOH)=0.1042 mol/L×0.02370 L=2.470×10−3 moln(\ce{NaOH}) = 0.1042\text{ mol/L} \times 0.02370\text{ L} = 2.470 \times 10^{-3}\text{ mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately determined the dispensed burette volume as 23.70 mL23.70\text{ mL}.

You correctly converted the volume to liters and solved for the chemical amount of NaOH\ce{NaOH} with appropriate units and significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric Volume Unit Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the conversion relationship between cubic meters and liters (1 m3=103 L1\text{ m}^3 = 10^3\text{ L}) with the conversion relationship between cubic meters and milliliters (1 m3=106 mL1\text{ m}^3 = 10^6\text{ mL}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Three-Dimensional Unit Scaling
  • Linear metric prefixes cube when applied to volume: (1 m)3=(100 cm)3=106 cm3=106 mL=103 L(1\text{ m})^3 = (100\text{ cm})^3 = 10^6\text{ cm}^3 = 10^6\text{ mL} = 10^3\text{ L}.

  • Always convert through liters (1 mL=10−3 L1\text{ mL} = 10^{-3}\text{ L} and 1 L=10−3 m31\text{ L} = 10^{-3}\text{ m}^3) or cubic centimeters (1 mL=1 cm3=10−6 m31\text{ mL} = 1\text{ cm}^3 = 10^{-6}\text{ m}^3) to avoid missing a factor of 10310^3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that 1 mL=1 cm31\text{ mL} = 1\text{ cm}^3 and 1 m=100 cm1\text{ m} = 100\text{ cm}.

  2. Cube the linear conversion: 1 m3=(102 cm)3=106 cm3=106 mL1\text{ m}^3 = (10^2\text{ cm})^3 = 10^6\text{ cm}^3 = 10^6\text{ mL}, which gives 1 mL=10−6 m31\text{ mL} = 10^{-6}\text{ m}^3.

  3. Multiply the volume by this conversion factor: 23.70 mL×10−6 m3/mL=2.370×10−5 m323.70\text{ mL} \times 10^{-6}\text{ m}^3/\text{mL} = 2.370 \times 10^{-5}\text{ m}^3.

Final answer

(a) 2.370×10−5 m32.370 \times 10^{-5}\text{ m}^3; (b) 2.470×10−3 mol2.470 \times 10^{-3}\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting derived cubic units (like cm3\text{cm}^3, dm3\text{dm}^3, and m3\text{m}^3) by cubing the base linear prefix factor.

  • Use intermediate step-conversions (such as mL→L→m3\text{mL} \to \text{L} \to \text{m}^3) whenever unsure about direct metric conversion factors.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the delivered titrant volume by taking only the final burette reading without subtracting the initial volume, giving an incorrect titrant volume of 2.485 × 10⁻⁵ m³ and consequently 2.589 × 10⁻³ mol of NaOH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=24.85 mLV = 24.85\text{ mL}

    Correct

    V=Vfinal−Vinitial=24.85 mL−1.15 mL=23.70 mLV = V_{\text{final}} - V_{\text{initial}} = 24.85\text{ mL} - 1.15\text{ mL} = 23.70\text{ mL}

    A burette measures cumulative liquid dispensed between two points. You must subtract the initial reading (1.15 mL1.15\text{ mL}) from the final reading (24.85 mL24.85\text{ mL}) to find the net volume delivered.

  2. Step 2

    V=24.85×10−6 m3=2.485×10−5 m3V = 24.85 \times 10^{-6}\text{ m}^3 = 2.485 \times 10^{-5}\text{ m}^3

    Correct

    V=23.70×10−6 m3=2.370×10−5 m3V = 23.70 \times 10^{-6}\text{ m}^3 = 2.370 \times 10^{-5}\text{ m}^3

    Your unit conversion from mL\text{mL} to m3\text{m}^3 and scientific notation formatting were executed correctly, but the numerical value was carried over from the uncorrected volume in Step 1.

  3. Step 3

    V=24.85 mL=0.02485 L  ⟹  n(NaOH)=0.1042 mol/L×0.02485 L=2.589×10−3 molV = 24.85\text{ mL} = 0.02485\text{ L} \implies n(\text{NaOH}) = 0.1042\text{ mol/L} \times 0.02485\text{ L} = 2.589 \times 10^{-3}\text{ mol}

    Correct

    V=0.02370 L  ⟹  n(NaOH)=0.1042 mol/L×0.02370 L=2.470×10−3 molV = 0.02370\text{ L} \implies n(\text{NaOH}) = 0.1042\text{ mol/L} \times 0.02370\text{ L} = 2.470 \times 10^{-3}\text{ mol}

    Your mole calculation using n=C⋅Vn = C \cdot V was set up and computed correctly, but it used the uncorrected volume from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the unit conversion relationship 1 mL=10−6 m31\text{ mL} = 10^{-6}\text{ m}^3.

You expressed values in proper scientific notation with four significant figures.

You correctly used the molarity relationship n=C⋅Vn = C \cdot V to calculate moles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Initial Burette Reading

You treated the final burette scale reading as the delivered volume rather than taking the difference between the final and initial readings.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute position reading on a graduated burette with the net volume dispensed. Because burette graduations start from 00 at the top and increase downward, delivered volume is always calculated as Vdelivered=Vfinal−VinitialV_{\text{delivered}} = V_{\text{final}} - V_{\text{initial}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Burette Volume Calculation
  • Vdelivered=Vfinal−VinitialV_{\text{delivered}} = V_{\text{final}} - V_{\text{initial}}

  • Always check whether the initial volume reading was non-zero before beginning conversions or mole calculations.

Milliliters to Cubic Meters Conversion
  • 1 mL=1 cm3=10−6 m31\text{ mL} = 1\text{ cm}^3 = 10^{-6}\text{ m}^3

  • Multiply the volume in mL\text{mL} by 10−610^{-6} to convert directly into m3\text{m}^3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate delivered titrant volume: V=24.85 mL−1.15 mL=23.70 mLV = 24.85\text{ mL} - 1.15\text{ mL} = 23.70\text{ mL}

  2. Convert to m3\text{m}^3: V=23.70×10−6 m3=2.370×10−5 m3V = 23.70 \times 10^{-6}\text{ m}^3 = 2.370 \times 10^{-5}\text{ m}^3

  3. Convert to liters and calculate chemical amount: n=0.1042 mol/L×0.02370 L=2.470×10−3 moln = 0.1042\text{ mol/L} \times 0.02370\text{ L} = 2.470 \times 10^{-3}\text{ mol}

Final answer

(a) 2.370×10−5 m32.370 \times 10^{-5}\text{ m}^3; (b) 2.470×10−3 mol2.470 \times 10^{-3}\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • In future titration problems, underline both the initial and final burette readings before writing down any equations.

  • Practice calculating volume differences first: always write V=Vfinal−VinitialV = V_{\text{final}} - V_{\text{initial}} explicitly.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the delivered titrant volume with the aliquot volume of hydrochloric acid, calculating the amount of NaOH using 25.00 mL to get 2.605 × 10⁻³ mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=24.85 mL−1.15 mL=23.70 mL  ⟹  V=2.370×10−5 m3V = 24.85\text{ mL} - 1.15\text{ mL} = 23.70\text{ mL} \implies V = 2.370 \times 10^{-5}\text{ m}^3

  2. Step 2

    V=25.00 mL=0.02500 LV = 25.00\text{ mL} = 0.02500\text{ L}

    Correct

    V(NaOH)=23.70 mL=0.02370 LV(\text{NaOH}) = 23.70\text{ mL} = 0.02370\text{ L}

    You assigned the volume of titrant as 25.00 mL25.00\text{ mL}, which is the aliquot volume of the analyte solution (HCl\text{HCl}) in the flask rather than the volume of NaOH\text{NaOH} dispensed from the burette.

  3. Step 3

    n(NaOH)=0.1042 mol/L×0.02500 L=2.605×10−3 moln(\text{NaOH}) = 0.1042\text{ mol/L} \times 0.02500\text{ L} = 2.605 \times 10^{-3}\text{ mol}

    Correct

    n(NaOH)=0.1042 mol/L×0.02370 L=2.470×10−3 moln(\text{NaOH}) = 0.1042\text{ mol/L} \times 0.02370\text{ L} = 2.470 \times 10^{-3}\text{ mol}

    Your arithmetic n=C⋅Vn = C \cdot V is executed correctly, but the resulting molar amount is inaccurate because it carries forward the incorrect volume from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net volume delivered from the burette by subtracting the initial reading from the final reading.

You converted milliliters to cubic meters accurately using the conversion factor 1 mL=10−6 m31\text{ mL} = 10^{-6}\text{ m}^3.

You maintained four significant figures with proper scientific notation in part (a).

You correctly applied the relationship n=C⋅Vn = C \cdot V to relate molarity, volume, and chemical amount.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Analyte Aliquot Volume with Titrant Delivered Volume

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the analyte sample volume (25.00 mL25.00\text{ mL} of HCl\text{HCl}) instead of the titrant solution volume (23.70 mL23.70\text{ mL} of NaOH\text{NaOH}) when calculating the molar amount of NaOH\text{NaOH} delivered. In a titration, always pair the titrant concentration with the titrant volume dispensed from the burette.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Solution Identity Before Multiplying
  • When calculating n=C⋅Vn = C \cdot V, ensure both CC and VV belong to the exact same chemical species.

  • Label volumes explicitly with their identity, such as Vtitrant(NaOH)=23.70 mLV_{\text{titrant}}(\text{NaOH}) = 23.70\text{ mL} and Vanalyte(HCl)=25.00 mLV_{\text{analyte}}(\text{HCl}) = 25.00\text{ mL}, before substituting into formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the delivered titrant volume obtained in part (a): V(NaOH)=23.70 mL=0.02370 LV(\text{NaOH}) = 23.70\text{ mL} = 0.02370\text{ L}.

  2. Multiply by the titrant concentration: n(NaOH)=0.1042 mol/L×0.02370 L=2.46954×10−3 moln(\text{NaOH}) = 0.1042\text{ mol/L} \times 0.02370\text{ L} = 2.46954 \times 10^{-3}\text{ mol}.

  3. Round to four significant figures: n(NaOH)=2.470×10−3 moln(\text{NaOH}) = 2.470 \times 10^{-3}\text{ mol}.

Final answer

(a) 2.370×10−5 m32.370 \times 10^{-5}\text{ m}^3; (b) 2.470×10−3 mol2.470 \times 10^{-3}\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write chemical species as subscripts on every variable (e.g., VNaOHV_{\text{NaOH}} vs. VHClV_{\text{HCl}}) to prevent mixing up analyte and titrant volumes.

  • Double-check whether a given volume represents solution in the titration flask (analyte) or solution dispensed from the burette (titrant).

Lock it in

Similar question

01

A volumetric pipette dispenses exactly 10.00 mL10.00\text{ mL} of an aqueous solution. Express this volume in cubic meters (m3\text{m}^3) in standard scientific notation.

Answer

1.000×10−5 m31.000 \times 10^{-5}\text{ m}^3. Key step: V=10.00 mL×10−6 m3⋅mL−1=1.000×10−5 m3V = 10.00\text{ mL} \times 10^{-6}\text{ m}^3\cdot\text{mL}^{-1} = 1.000 \times 10^{-5}\text{ m}^3.

02

A solution has a concentration of 0.250 mol/L0.250\text{ mol/L}. If a reaction vessel contains 4.50×10−4 m34.50 \times 10^{-4}\text{ m}^3 of this solution, how many moles of solute are present?

Answer

0.113 mol0.113\text{ mol} (or 1.13×10−1 mol1.13 \times 10^{-1}\text{ mol}). Key steps: Convert m3\text{m}^3 to L\text{L} via 4.50×10−4 m3×103 L/m3=0.450 L4.50 \times 10^{-4}\text{ m}^3 \times 10^3\text{ L}/\text{m}^3 = 0.450\text{ L}; then calculate n=0.250 mol/L×0.450 L=0.1125 mol≈0.113 moln = 0.250\text{ mol/L} \times 0.450\text{ L} = 0.1125\text{ mol} \approx 0.113\text{ mol}.

03

An analytical chemist prepares a stock solution by dissolving 0.0520 mol0.0520\text{ mol} of solute in water to a total volume of 5.00×10−4 m35.00 \times 10^{-4}\text{ m}^3. Calculate the molarity (M\text{M} or mol/L\text{mol/L}) and the concentration in mol⋅m−3\text{mol}\cdot\text{m}^{-3}.

Answer

Molarity = 0.104 M0.104\text{ M}; Concentration in mol⋅m−3=104 mol⋅m−3\text{mol}\cdot\text{m}^{-3} = 104\text{ mol}\cdot\text{m}^{-3}. Key steps: Convert volume to liters: 5.00×10−4 m3=0.500 L5.00 \times 10^{-4}\text{ m}^3 = 0.500\text{ L}. Molarity =0.0520 mol0.500 L=0.104 M= \frac{0.0520\text{ mol}}{0.500\text{ L}} = 0.104\text{ M}. Concentration in mol⋅m−3=0.0520 mol5.00×10−4 m3=104 mol⋅m−3\text{mol}\cdot\text{m}^{-3} = \frac{0.0520\text{ mol}}{5.00 \times 10^{-4}\text{ m}^3} = 104\text{ mol}\cdot\text{m}^{-3}.

Loading workspace…