Resources

The photoelectric work function of metallic potassium is Φ=2.29 eV\Phi = 2.29\text{ eV} (1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}). Determine the critical threshold boundary conditions for photoelectric emission: (a) the cutoff threshold frequency ν0\nu_0 in s−1\text{s}^{-1} below which no photoelectrons can be ejected regardless of beam intensity, and (b) the maximum threshold wavelength λ0\lambda_0 in nanometers (nm\text{nm}) capable of initiating photoemission (h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}, c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}).

Answer and steps

Final answer

(a) ν0=5.54×1014 s−1\nu_0 = 5.54 \times 10^{14}\text{ s}^{-1}; (b) λ0=542 nm\lambda_0 = 542\text{ nm}.

Steps

01

Convert the Work Function to Joules

The work function Φ\Phi represents the minimum energy required to liberate an electron from the surface of metallic potassium. Before applying fundamental physical constants, convert the energy from electron-volts (eV\text{eV}) to SI units (Joules, J\text{J}):

Φ=2.29 eV×(1.602×10−19 J/eV)=3.6686×10−19 J\Phi = 2.29\text{ eV} \times \left(1.602 \times 10^{-19}\text{ J/eV}\right) = 3.6686 \times 10^{-19}\text{ J}


02

Determine the Threshold Frequency (ν0\nu_0)

According to Einstein's photoelectric equation, the energy of a threshold photon is exactly equal to the work function:

Φ=hν0\Phi = h\nu_0

Rearranging for the threshold frequency ν0\nu_0:

ν0=Φh=3.6686×10−19 J6.626×10−34 J⋅s≈5.537×1014 s−1\nu_0 = \frac{\Phi}{h} = \frac{3.6686 \times 10^{-19}\text{ J}}{6.626 \times 10^{-34}\text{ J}\cdot\text{s}} \approx 5.537 \times 10^{14}\text{ s}^{-1}

Rounding to three significant figures gives: ν0=5.54×1014 s−1\nu_0 = 5.54 \times 10^{14}\text{ s}^{-1}

Key Takeaway: Any light with a frequency lower than ν0\nu_0 (ν<ν0\nu < \nu_0) carries insufficient photon energy to eject electrons, regardless of how bright or intense the light beam is.


03

Determine the Threshold Wavelength (λ0\lambda_0)

Frequency and wavelength are inversely related by the speed of light:

c=λ0ν0  ⟹  λ0=cν0c = \lambda_0 \nu_0 \implies \lambda_0 = \frac{c}{\nu_0}

Substitute the known values into the equation:

λ0=3.00×108 m/s5.5366×1014 s−1≈5.418×10−7 m\lambda_0 = \frac{3.00 \times 10^8\text{ m/s}}{5.5366 \times 10^{14}\text{ s}^{-1}} \approx 5.418 \times 10^{-7}\text{ m}

Convert meters to nanometers (1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}):

λ0=5.418×10−7 m×109 nm1 m≈542 nm\lambda_0 = 5.418 \times 10^{-7}\text{ m} \times \frac{10^9\text{ nm}}{1\text{ m}} \approx 542\text{ nm}

Common Pitfall: Because wavelength and frequency have an inverse relationship (E=hcλE = \frac{hc}{\lambda}), the threshold frequency ν0\nu_0 is a minimum cutoff, whereas the threshold wavelength λ0\lambda_0 is a maximum cutoff. Photons with wavelengths longer than 542 nm542\text{ nm} have lower energy and cannot eject electrons.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the work function from electron-volts to joules, resulting in an incorrect threshold frequency and wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    hν0=Φ  ⟹  ν0=2.296.626×10−34  ⟹  ν0=3.46×1033 s−1h\nu_0 = \Phi \implies \nu_0 = \frac{2.29}{6.626 \times 10^{-34}} \implies \nu_0 = 3.46 \times 10^{33}\text{ s}^{-1}

    Correct

    ν0=Φh=2.29×1.602×10−19 J6.626×10−34 J⋅s=5.54×1014 s−1\nu_0 = \frac{\Phi}{h} = \frac{2.29 \times 1.602 \times 10^{-19}\text{ J}}{6.626 \times 10^{-34}\text{ J}\cdot\text{s}} = 5.54 \times 10^{14}\text{ s}^{-1}

    You set up the relationship ν0=Φh\nu_0 = \frac{\Phi}{h} correctly, but you forgot to convert Φ=2.29 eV\Phi = 2.29\text{ eV} into Joules before dividing by Planck's constant (h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}).

  2. Step 2

    λ0=cν0  ⟹  λ0=3.00×1083.46×1033  ⟹  λ0=8.67×10−26 m  ⟹  λ0=8.67×10−17 nm\lambda_0 = \frac{c}{\nu_0} \implies \lambda_0 = \frac{3.00 \times 10^8}{3.46 \times 10^{33}} \implies \lambda_0 = 8.67 \times 10^{-26}\text{ m} \implies \lambda_0 = 8.67 \times 10^{-17}\text{ nm}

    Correct

    λ0=cν0=3.00×108 m/s5.537×1014 s−1=5.42×10−7 m=542 nm\lambda_0 = \frac{c}{\nu_0} = \frac{3.00 \times 10^8\text{ m/s}}{5.537 \times 10^{14}\text{ s}^{-1}} = 5.42 \times 10^{-7}\text{ m} = 542\text{ nm}

    Your algebraic method and metric unit conversion from meters to nanometers were carried out properly, but the numerical answer is incorrect due to the propagated value of ν0\nu_0 from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct photoelectric formulas relating work function to threshold frequency and wavelength.

You rearranged the wave equation λ=cν\lambda = \frac{c}{\nu} and converted meters to nanometers accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You omitted the conversion factor from electron-volts to Joules (1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}) when calculating frequency with Planck's constant in SI units (J⋅s\text{J}\cdot\text{s}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency with Planck's Constant
  • Planck's constant hh carries SI units of J⋅s\text{J}\cdot\text{s}. Any energy term in E=hνE = h\nu or Φ=hν0\Phi = h\nu_0 must be converted to Joules first.

  • Always multiply energy values given in eV\text{eV} by 1.602×10−19 J/eV1.602 \times 10^{-19}\text{ J/eV} before substituting them into SI formulas.

Physical Reality Check for Light
  • Visible light frequencies are around 1014 s−110^{14}\text{ s}^{-1} and wavelengths are hundreds of nanometers (10−7 m10^{-7}\text{ m}).

  • If your calculated frequency is around 1033 s−110^{33}\text{ s}^{-1} or your wavelength is 10−17 nm10^{-17}\text{ nm}, treat this as an immediate red flag that an energy unit conversion was missed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the work function to Joules: Φ=2.29 eV×1.602×10−19 J/eV=3.669×10−19 J\Phi = 2.29\text{ eV} \times 1.602 \times 10^{-19}\text{ J/eV} = 3.669 \times 10^{-19}\text{ J}.

  2. Calculate the threshold frequency: ν0=Φh=3.669×10−19 J6.626×10−34 J⋅s=5.54×1014 s−1\nu_0 = \frac{\Phi}{h} = \frac{3.669 \times 10^{-19}\text{ J}}{6.626 \times 10^{-34}\text{ J}\cdot\text{s}} = 5.54 \times 10^{14}\text{ s}^{-1}.

  3. Calculate the threshold wavelength: λ0=cν0=3.00×108 m/s5.537×1014 s−1=5.42×10−7 m=542 nm\lambda_0 = \frac{c}{\nu_0} = \frac{3.00 \times 10^8\text{ m/s}}{5.537 \times 10^{14}\text{ s}^{-1}} = 5.42 \times 10^{-7}\text{ m} = 542\text{ nm}.

Final answer

(a) ν0=5.54×1014 s−1\nu_0 = 5.54 \times 10^{14}\text{ s}^{-1}; (b) λ0=542 nm\lambda_0 = 542\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting non-SI energy units (eV\text{eV}, kJ/mol\text{kJ/mol}) to Joules per photon before solving photoelectric equations.

  • Verify your final optical values against typical light scales (frequencies around 1014−1015 s−110^{14}-10^{15}\text{ s}^{-1} and wavelengths between 200−800 nm200-800\text{ nm}).

OverviewACEpath Teacher's Diagnosis

02 The student inverts the relationship between wavelength and frequency, setting λ₀ = ν₀ / c instead of c / ν₀.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Φ=2.29×1.602×10−19 J=3.67×10−19 J\Phi = 2.29 \times 1.602 \times 10^{-19}\text{ J} = 3.67 \times 10^{-19}\text{ J}

  2. Step 2

    ν0=Φh=3.67×10−196.626×10−34  ⟹  ν0=5.54×1014 s−1\nu_0 = \frac{\Phi}{h} = \frac{3.67 \times 10^{-19}}{6.626 \times 10^{-34}} \implies \nu_0 = 5.54 \times 10^{14}\text{ s}^{-1}

  3. Step 3

    λ0=ν0c=5.54×10143.00×108  ⟹  λ0=1.85×106 m\lambda_0 = \frac{\nu_0}{c} = \frac{5.54 \times 10^{14}}{3.00 \times 10^8} \implies \lambda_0 = 1.85 \times 10^6\text{ m}

    Correct

    λ0=cν0=3.00×108 m/s5.54×1014 s−1≈5.42×10−7 m\lambda_0 = \frac{c}{\nu_0} = \frac{3.00 \times 10^8\text{ m/s}}{5.54 \times 10^{14}\text{ s}^{-1}} \approx 5.42 \times 10^{-7}\text{ m}

    The fundamental wave equation is c=λνc = \lambda \nu, which rearranges algebraically to λ=cν\lambda = \frac{c}{\nu}. You set λ0=ν0c\lambda_0 = \frac{\nu_0}{c}, inverting the ratio.

  4. Step 4

    λ0=1.85×1015 nm\lambda_0 = 1.85 \times 10^{15}\text{ nm}

    Correct

    λ0=5.42×10−7 m×109 nm/m=542 nm\lambda_0 = 5.42 \times 10^{-7}\text{ m} \times 10^9\text{ nm/m} = 542\text{ nm}

    You multiplied by 10910^9 to convert meters to nanometers correctly, but the numerical value was carried over from the inverted formula in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the work function from electron-volts to Joules.

You correctly used Planck's constant to calculate the cutoff frequency ν0\nu_0 in part (a).

You used the correct metric conversion factor between meters and nanometers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Wave Equation Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You rearranged c=λνc = \lambda\nu incorrectly as λ=νc\lambda = \frac{\nu}{c} instead of isolating λ\lambda by dividing both sides by ν\nu, which yields λ=cν\lambda = \frac{c}{\nu}. Checking the units (s−1)/(m/s)=m−1≠m(\text{s}^{-1})/(\text{m/s}) = \text{m}^{-1}\neq\text{m} would have immediately flagged the inversion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Equation Rearrangement
  • For any electromagnetic wave, the speed of light is c=λνc = \lambda \nu. To solve for wavelength, divide both sides by frequency: λ=cν\lambda = \frac{c}{\nu}.

  • Always write out c=λνc = \lambda \nu before isolating the unknown variable, and perform dimensional analysis to confirm the units yield meters.

Dimensional Sanity Check
  • Wavelength must have units of distance (meters): [c][ν]=m/ss−1=m\frac{[c]}{[\nu]} = \frac{\text{m/s}}{\text{s}^{-1}} = \text{m}. In contrast, [ν][c]=m−1\frac{[\nu]}{[c]} = \text{m}^{-1}.

  • Check your units whenever substituting into a fraction: if your resulting unit is m−1\text{m}^{-1} or you get a macroscopic wavelength (like millions of meters for visible light), re-check your algebraic rearrangement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct rearrangement of the wave speed relation: λ0=cν0\lambda_0 = \frac{c}{\nu_0}.

  2. Substitute the speed of light and your cutoff frequency: λ0=3.00×108 m/s5.537×1014 s−1=5.418×10−7 m\lambda_0 = \frac{3.00 \times 10^8\text{ m/s}}{5.537 \times 10^{14}\text{ s}^{-1}} = 5.418 \times 10^{-7}\text{ m}.

  3. Convert to nanometers: λ0=5.418×10−7 m×109 nm1 m≈542 nm\lambda_0 = 5.418 \times 10^{-7}\text{ m} \times \frac{10^9\text{ nm}}{1\text{ m}} \approx 542\text{ nm}.

Final answer

(a) ν0=5.54×1014 s−1\nu_0 = 5.54 \times 10^{14}\text{ s}^{-1}; (b) λ0=542 nm\lambda_0 = 542\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the wave relationship starting point c=λνc = \lambda \nu and practice solving explicitly for λ\lambda and ν\nu separately.

  • Use dimensional analysis on every ratio to verify that units cancel out to meters (m)(\text{m}) for wavelength.

  • Solve the three targeted practice problems below to master threshold energy and wavelength conversions.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the final threshold wavelength from meters to nanometers, leaving the numerical value in meters labeled as nanometers.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Φ=2.29×1.602×10−19 J=3.67×10−19 J\Phi = 2.29 \times 1.602 \times 10^{-19}\text{ J} = 3.67 \times 10^{-19}\text{ J}

  2. Step 2

    ν0=Φh=3.67×10−196.626×10−34  ⟹  ν0=5.54×1014 s−1\nu_0 = \frac{\Phi}{h} = \frac{3.67 \times 10^{-19}}{6.626 \times 10^{-34}} \implies \nu_0 = 5.54 \times 10^{14}\text{ s}^{-1}

  3. Step 3

    λ\lambda_0 = cν0\frac{c}{\nu_0} = 3.00×1085.54×1014\frac{3.00 \times 10^8}{5.54 \times 10^{14}}   ⟹  \implies λ\lambda_0 = 5.42 ×\times 10^{-7} nm\text{ nm}

    Correct

    λ\lambda0 = cν0\frac{c}{\nu_0} = 3.00×108 m/s5.54×1014 s−1\frac{3.00 \times 10^8\text{ m/s}}{5.54 \times 10^{14}\text{ s}^{-1}} = 5.42 ×\times 10^{-7} m\text{ m} = 542 nm\text{ nm}

    Using cc in m/s\text{m/s} yields a wavelength in meters: 5.42×10−7 m5.42 \times 10^{-7}\text{ m}. To convert meters to nanometers, you must multiply by 109 nm/m10^9\text{ nm/m}, which gives 542 nm542\text{ nm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the conversion factor 1.602×10−19 J/eV1.602 \times 10^{-19}\text{ J/eV} to convert the work function into SI units.

You correctly set up and solved Einstein's threshold relation ν0=Φh\nu_0 = \frac{\Phi}{h} to find the cutoff frequency.

You correctly identified the inverse relation between frequency and wavelength, λ0=cν0\lambda_0 = \frac{c}{\nu_0}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing metric unit conversion

You correctly computed the numerical value in SI units (meters) but attached the requested unit (nm\text{nm}) without multiplying by 109 nm/m10^9\text{ nm/m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating SI derived base units with prefixed metric units, leading to omitting the explicit dimensional conversion step from meters to nanometers.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Tracking in Formulas
  • Standard physical constants (c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}) yield values in SI base units (meters, not nanometers).

  • Always carry explicit unit tags through each line of algebra until the final converted unit is reached.

Metric Prefix Conversion
  • 1 m=109 nm1\text{ m} = 10^9\text{ nm}, so converting from meters to nanometers requires multiplying by 10910^9 (or dividing by 10−910^{-9}).

  • Multiply values in meters by 109 nm/m10^9\text{ nm/m} to obtain nanometers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate λ0\lambda_0 in SI units: λ0=cν0=3.00×108 m/s5.54×1014 s−1=5.418×10−7 m\lambda_0 = \frac{c}{\nu_0} = \frac{3.00 \times 10^8\text{ m/s}}{5.54 \times 10^{14}\text{ s}^{-1}} = 5.418 \times 10^{-7}\text{ m}

  2. Apply the metric unit conversion factor to convert meters to nanometers: λ0=5.418×10−7 m×109 nm1 m=541.8 nm≈542 nm\lambda_0 = 5.418 \times 10^{-7}\text{ m} \times \frac{10^9\text{ nm}}{1\text{ m}} = 541.8\text{ nm} \approx 542\text{ nm}

Final answer

(a) ν0=5.54×1014 s−1\nu_0 = 5.54 \times 10^{14}\text{ s}^{-1}; (b) λ0=542 nm\lambda_0 = 542\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down unit labels next to each number in your working so you clearly see when a quantity is in meters versus nanometers.

  • Perform an order-of-magnitude sanity check: visible light wavelengths typically range between 400 nm400\text{ nm} and 700 nm700\text{ nm}, never 10−7 nm10^{-7}\text{ nm}.

Lock it in

Similar question

01

A metal surface has a work function of Φ=4.14 eV\Phi = 4.14\text{ eV}. Calculate its threshold frequency ν0\nu_0 in s−1\text{s}^{-1} (h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}, 1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}).

Answer

ν0=1.00×1015 s−1\nu_0 = 1.00 \times 10^{15}\text{ s}^{-1}. First, convert Φ\Phi to Joules: 4.14×1.602×10−19 J=6.632×10−19 J4.14 \times 1.602 \times 10^{-19}\text{ J} = 6.632 \times 10^{-19}\text{ J}. Then, divide by hh: ν0=6.632×10−19 J6.626×10−34 J⋅s=1.00×1015 s−1\nu_0 = \frac{6.632 \times 10^{-19}\text{ J}}{6.626 \times 10^{-34}\text{ J}\cdot\text{s}} = 1.00 \times 10^{15}\text{ s}^{-1}.

02

Cesium has a work function of Φ=2.14 eV\Phi = 2.14\text{ eV}. Determine its cutoff threshold wavelength λ0\lambda_0 in nanometers (h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}, c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}, 1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}).

Answer

λ0=580 nm\lambda_0 = 580\text{ nm}. Convert energy to Joules: Φ=2.14×1.602×10−19 J=3.428×10−19 J\Phi = 2.14 \times 1.602 \times 10^{-19}\text{ J} = 3.428 \times 10^{-19}\text{ J}. Use λ0=hcΦ=(6.626×10−34 J⋅s)(3.00×108 m/s)3.428×10−19 J=5.80×10−7 m=580 nm\lambda_0 = \frac{hc}{\Phi} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(3.00 \times 10^8\text{ m/s})}{3.428 \times 10^{-19}\text{ J}} = 5.80 \times 10^{-7}\text{ m} = 580\text{ nm}.

03

Light with a wavelength of λ=400 nm\lambda = 400\text{ nm} shines on a metal with Φ=2.50 eV\Phi = 2.50\text{ eV}. Determine whether photoelectrons will be ejected, and state the condition that justifies your answer.

Answer

Yes, photoelectrons will be ejected. The photon energy is E=hcλ=(6.626×10−34 J⋅s)(3.00×108 m/s)400×10−9 m=4.97×10−19 J=3.10 eVE = \frac{hc}{\lambda} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(3.00 \times 10^8\text{ m/s})}{400 \times 10^{-9}\text{ m}} = 4.97 \times 10^{-19}\text{ J} = 3.10\text{ eV}. Because the photon energy E=3.10 eVE = 3.10\text{ eV} exceeds the work function Φ=2.50 eV\Phi = 2.50\text{ eV} (or equivalently, λ=400 nm<λ0=497 nm\lambda = 400\text{ nm} < \lambda_0 = 497\text{ nm}), photoemission occurs.

Loading workspace…