Resources

Consider the homologous series of straight-chain aliphatic primary alcohols, CH3(CH2)n−1OH\text{CH}_3(\text{CH}_2)_{n-1}\text{OH}. As the parameter nn approaches large values (e.g., n=1n = 1 to n=20n = 20), the physical properties transition from polar-solvent behavior to alkane-like hydrocarbon behavior. (a) For 1-eicosanol (n=20n = 20, formula CH3(CH2)19OH\text{CH}_3(\text{CH}_2)_{19}\text{OH}), calculate the mass percentage of the hydrophilic hydroxyl functional group (−OH-\text{OH}, formula mass 17.01 g/mol17.01\text{ g/mol}) relative to the total molecular mass (298.55 g/mol298.55\text{ g/mol}). (b) Explain how the asymptotic dominance of the hydrophobic hydrocarbon chain over the single polar functional group governs the water solubility and physical state of 1-eicosanol compared to methanol (n=1n = 1).

Answer and steps

Final answer

(a) 5.70%5.70\%; (b) Methanol is completely miscible with water because the hydrophilic −OH-\text{OH} group constitutes 53.1%53.1\% of its mass and favorable hydrogen bonding dominates; in 1-eicosanol, the nonpolar aliphatic chain accounts for 94.3%94.3\% of the molecular weight, meaning hydrophobic disruption of the water hydrogen-bonding network vastly exceeds the hydration energy of the single −OH-\text{OH} group, rendering 1-eicosanol a water-insoluble, waxy crystalline solid dominated by extensive intermolecular London dispersion forces.

Steps

Part (a): Calculating the Mass Percentage of the Hydroxyl Group

  1. Identify the relevant masses:

    • Molar mass of the hydroxyl functional group (−OH-\ce{OH}): M−OH=17.01 g/molM_{-\ce{OH}} = 17.01\text{ g/mol}
    • Total molar mass of 1-eicosanol (CHX3(CHX2)X19OH\ce{CH3(CH2)_{19}OH}): Mtotal=298.55 g/molM_{\text{total}} = 298.55\text{ g/mol}
  2. Compute the mass percent: Mass %=(M−OHMtotal)×100%\text{Mass } \% = \left(\frac{M_{-\ce{OH}}}{M_{\text{total}}}\right) \times 100\% Mass %=(17.01 g/mol298.55 g/mol)×100%≈5.70%\text{Mass } \% = \left(\frac{17.01\text{ g/mol}}{298.55\text{ g/mol}}\right) \times 100\% \approx 5.70\%

Part (b): Impact of Chain Length on Solubility and Physical State

  1. Solubility in Water:

    • Methanol (CHX3OH\ce{CH3OH}, n=1n = 1): The polar, hydrophilic −OH-\ce{OH} group makes up more than half of the molecular mass: 17.01 g/mol32.04 g/mol×100%≈53.1%\frac{17.01\text{ g/mol}}{32.04\text{ g/mol}} \times 100\% \approx 53.1\% The strong, favorable hydrogen bonding formed between the −OH-\ce{OH} group and water molecules easily compensates for any minor disruption of water-water interactions caused by the tiny methyl group, rendering methanol completely miscible in water.
    • 1-Eicosanol (CX20HX41OH\ce{C20H41OH}, n=20n = 20): The nonpolar aliphatic tail constitutes approximately 100%−5.70%=94.3%100\% - 5.70\% = 94.3\% of the total mass. Inserting this vast, nonpolar hydrocarbon chain into water requires breaking a large network of strong water-water hydrogen bonds without forming sufficiently stabilizing intermolecular attractions in return (hydrophobic effect). The small hydration enthalpy of the single terminal −OH-\ce{OH} group cannot compensate for this large unfavorable free energy change, making 1-eicosanol practically insoluble in water.
  2. Physical State at Room Temperature:

    • Methanol: With a tiny nonpolar surface area, its intermolecular London dispersion forces are weak. Although hydrogen bonding keeps it in the condensed phase, it remains a volatile liquid (boiling point ≈64.7∘C\approx 64.7^\circ\text{C}, melting point ≈−97.6∘C\approx -97.6^\circ\text{C}).
    • 1-Eicosanol: The extensive 20-carbon saturated chain provides a very large surface area for additive intermolecular London dispersion forces. These cumulative dispersion forces between closely packed, aligned aliphatic chains are strong enough to hold the molecules in a rigid lattice, making 1-eicosanol a waxy, crystalline solid at room temperature (melting point ≈65–67∘C\approx 65\text{--}67^\circ\text{C}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the numerator and denominator when calculating the mass percentage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    $Mass \text{Mass } % = (298.55 / 17.01) ×\times 100%   ⟹  \implies Mass \text{Mass } % = 1755%$$

    Correct

    $Mass \text{Mass } % = (17.01 g/mol298.55 g/mol)\left(\frac{17.01\text{ g/mol}}{298.55\text{ g/mol}}\right) ×\times 100% ≈\approx 5.70%$$

    You divided the total molar mass by the mass of the hydroxyl group rather than dividing the part by the whole. The mass percentage of a constituent functional group cannot exceed 100%100\%.

  2. Step 2

    Methanol has a high proportion of polar −OH-\text{OH}, so it forms hydrogen bonds with water and is fully miscible as a liquid.   ⟹  \implies 1-Eicosanol is dominated by the long nonpolar C20\text{C}_{20} chain, making it insoluble in water, and strong London dispersion forces make it a solid.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly explained how dominant hydrogen bonding makes methanol miscible and liquid.

You accurately identified that extensive London dispersion forces across the 20-carbon chain make 1-eicosanol a solid and water-insoluble.

You recognized that calculating a percentage requires multiplying a ratio of molar masses by 100%100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Fraction in Mass Percentage Calculation

You placed the total molecular mass in the numerator and the functional group mass in the denominator instead of dividing the part by the whole.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Losing track of the fundamental definition of mass percentage as mass of componenttotal mass×100%\frac{\text{mass of component}}{\text{total mass}} \times 100\%, leading to a value well above 100%100\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Part vs. Whole Sanity Check
  • For any single component of a compound, Mass %=Mass of partTotal mass×100%≤100%\text{Mass } \% = \frac{\text{Mass of part}}{\text{Total mass}} \times 100\% \le 100\%.

  • Always verify that the numerator is the constituent part and that your final percentage is between 0%0\% and 100%100\%.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the fraction with the functional group mass (17.01 g/mol17.01\text{ g/mol}) in the numerator and the total mass (298.55 g/mol298.55\text{ g/mol}) in the denominator: 17.01298.55×100%\frac{17.01}{298.55} \times 100\%.

  2. Compute the quotient: 0.056975...×100%≈5.70%0.056975... \times 100\% \approx 5.70\%.

Final answer

(a) 5.70%5.70\%; (b) Methanol is miscible and liquid due to favorable hydrogen bonding with water; 1-eicosanol is an insoluble solid because the extensive hydrophobic C20\text{C}_{20} chain disrupts water's hydrogen-bond network and exhibits strong intermolecular London dispersion forces.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fraction setup for mass percent to ensure you always place the component mass in the numerator.

  • Incorporate a quick sanity check at the end of percentage problems: if the calculated percentage exceeds 100%100\%, check whether the fraction was inverted.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the percentage of the hydrocarbon tail instead of the hydroxyl group by subtracting the -OH mass from the total.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Mass of hydrocarbon chain=298.55−17.01=281.54 g/mol  ⟹  Mass %=(281.54298.55)×100%=94.30%\text{Mass of hydrocarbon chain} = 298.55 - 17.01 = 281.54\text{ g/mol} \implies \text{Mass } \% = \left(\frac{281.54}{298.55}\right) \times 100\% = 94.30\%

    Correct

    Mass %=(17.01 g/mol298.55 g/mol)×100%≈5.70%\text{Mass } \% = \left(\frac{17.01\text{ g/mol}}{298.55\text{ g/mol}}\right) \times 100\% \approx 5.70\%

    You calculated the mass percentage of the alkyl chain (281.54 g/mol281.54\text{ g/mol}) rather than the mass percentage of the hydroxyl functional group (−OH-\ce{OH}, 17.01 g/mol17.01\text{ g/mol}) requested in part (a).

  2. Step 2

    Methanol has a prominent polar -OH group that readily hydrogen bonds with water, making it water-soluble and liquid. For 1-eicosanol, the nonpolar chain dominates, preventing solubility in polar water, and large dispersion forces between chains make it a solid.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly articulated how hydrogen bonding drives the water solubility and liquid state of methanol.

You correctly linked the extensive hydrocarbon chain of 1-eicosanol to nonpolar insolubility in water and solid state due to dispersion forces.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Target Component Inversion in Mass Percent

You solved for the complementary portion of the molecule (the hydrocarbon tail) rather than the specified functional group (−OH-\ce{OH}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You focused on finding the mass of the hydrocarbon tail that was discussed in the introductory text, mistakenly putting that value in the numerator instead of the mass of the −OH-\ce{OH} group specified by the question.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Target Moiety
  • The numerator in a mass percent calculation must strictly represent the specific atom, ion, or functional group requested.

  • Highlight the exact species named in the prompt (here, the −OH-\ce{OH} group, 17.01 g/mol17.01\text{ g/mol}) before writing the ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the target moiety mass: M−OH=17.01 g/molM_{-\ce{OH}} = 17.01\text{ g/mol}.

  2. Divide by total molar mass: Mass %=(17.01 g/mol298.55 g/mol)×100%\text{Mass } \% = \left(\frac{17.01\text{ g/mol}}{298.55\text{ g/mol}}\right) \times 100\%.

  3. Compute the final percentage: 5.70%5.70\%.

Final answer

(a) 5.70%5.70\%; (b) Methanol is water-soluble and liquid due to dominant polar hydrogen bonding, whereas 1-eicosanol is water-insoluble and a waxy solid due to the dominant nonpolar chain and additive dispersion forces.

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read the prompt to confirm whether it asks for the functional group or the hydrocarbon backbone before setting up the numerator.

  • Verify that the calculated percentage matches the physical intuition (the small polar head of a 20-carbon alcohol must represent a very small percentage of total mass).

OverviewACEpath Teacher's Diagnosis

03 The student attributes the solid state of 1-eicosanol to stronger hydrogen bonding rather than dispersion forces along the hydrocarbon tail.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Mass %=17.01298.55×100%  ⟹  Mass %=5.70%\text{Mass } \% = \frac{17.01}{298.55} \times 100\% \implies \text{Mass } \% = 5.70\%

  2. Step 2

    Methanol is miscible in water due to hydrogen bonding, whereas 1-eicosanol is insoluble because the large nonpolar chain cannot interact favorably with water.

  3. Step 3

    1-Eicosanol is a solid because having a much larger molecule allows it to form more hydrogen bonds per molecule than methanol.

    Correct

    1-Eicosanol is a solid at room temperature because its extensive 20-carbon nonpolar tail provides a very large surface area for strong, cumulative intermolecular London dispersion forces, whereas each molecule still possesses only one −OH-\ce{OH} group for hydrogen bonding.

    Both 1-eicosanol and methanol are primary mono-alcohols with exactly one −OH-\ce{OH} group, so 1-eicosanol cannot form more hydrogen bonds per molecule. Its solid state at room temperature is driven by cumulative London dispersion forces between long, closely packed hydrocarbon chains.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the mass percentage of the −OH-\ce{OH} functional group in 1-eicosanol.

You clearly explained why methanol is water-soluble while 1-eicosanol is water-insoluble based on nonpolar chain dominance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Intermolecular forces in long-chain organic molecules

No

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that a larger molecular size increases the capacity for hydrogen bonding, overlooking that both molecules contain only a single hydroxyl functional group and that molecular size primarily scales London dispersion forces.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Functional Group Stoichiometry
  • In a homologous series of mono-alcohols (R−OH\ce{R-OH}), every molecule has exactly one −OH-\ce{OH} group regardless of chain length.

  • Check how many hydrogen-bond donor and acceptor groups are present per molecule before attributing property differences to hydrogen bonding.

Identify the Force Scaling with Chain Length
  • As hydrocarbon chain length and surface area increase, additive London dispersion forces scale dramatically, raising melting and boiling points.

  • Attribute phase changes along an aliphatic series to cumulative dispersion forces between nonpolar tails, not to hydrogen bonding.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Note that both methanol (CHX3OH\ce{CH3OH}) and 1-eicosanol (CHX3(CHX2)X19OH\ce{CH3(CH2)_{19}OH}) possess exactly one −OH-\ce{OH} group, meaning their capacity for hydrogen bonding per molecule is identical.

  2. Consider the 20-carbon aliphatic chain: it provides a very large surface area for additive London dispersion (van der Waals) forces.

  3. Conclude that these extensive dispersion forces allow the long, flexible chains to pack tightly into a solid lattice at room temperature, whereas methanol's tiny nonpolar surface area yields only weak dispersion forces, keeping it a liquid.

Final answer

(a) 5.70%5.70\%; (b) Methanol is miscible with water because hydrogen bonding dominates its small mass, whereas 1-eicosanol is insoluble due to the hydrophobic disruption caused by its vast nonpolar tail (94.3%94.3\% of mass). 1-Eicosanol is a solid at room temperature because extensive, additive intermolecular London dispersion forces along the 20-carbon chain hold the molecules tightly together, whereas both molecules have only one −OH-\ce{OH} group for hydrogen bonding.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how different intermolecular forces (dispersion, dipole-dipole, hydrogen bonding) scale with molecular mass and functional group count.

  • Practice comparing the boiling and melting points of homologous series such as primary alkanols, alkanes, and carboxylic acids.

Lock it in

Similar question

01

Calculate the mass percentage of the hydroxyl group (−OH-\text{OH}, 17.01 g/mol17.01\text{ g/mol}) in ethanol (CH3CH2OH\text{CH}_3\text{CH}_2\text{OH}, molar mass 46.07 g/mol46.07\text{ g/mol}). Express your answer to three significant figures.

Answer

Mass %=(17.01 g/mol46.07 g/mol)×100%≈36.9%\text{Mass } \% = \left(\frac{17.01\text{ g/mol}}{46.07\text{ g/mol}}\right) \times 100\% \approx 36.9\%.

02

1-Octanol (CH3(CH2)7OH\text{CH}_3(\text{CH}_2)_7\text{OH}, molar mass 130.23 g/mol130.23\text{ g/mol}) has a hydroxyl mass percent of 13.1%13.1\%. Explain why 1-octanol is virtually insoluble in water whereas 1-propanol (CH3CH2CH2OH\text{CH}_3\text{CH}_2\text{CH}_2\text{OH}, hydroxyl mass percent 28.3%28.3\%) is completely miscible.

Answer

In 1-propanol, the short 3-carbon chain causes minimal disruption to water's hydrogen-bonding network, so favorable hydrogen bonding from the −OH-\text{OH} group dominates and confers miscibility. In 1-octanol, the nonpolar 8-carbon chain accounts for nearly 87%87\% of the molecular mass; the energy penalty of disrupting water-water hydrogen bonds greatly exceeds the weak hydration energy of a single −OH-\text{OH} group, causing phase separation.

03

Ethylene glycol (HO−CH2CH2−OH\text{HO}-\text{CH}_2\text{CH}_2-\text{OH}, molar mass 62.07 g/mol62.07\text{ g/mol}) has two −OH-\text{OH} groups (2×17.01=34.02 g/mol2 \times 17.01 = 34.02\text{ g/mol}). Calculate the total mass percentage of hydroxyl groups in ethylene glycol and predict whether it has a higher or lower boiling point than 1-butanol (CH3(CH2)3OH\text{CH}_3(\text{CH}_2)_3\text{OH}, molar mass 74.12 g/mol74.12\text{ g/mol}).

Answer

Mass %=(34.02 g/mol62.07 g/mol)×100%≈54.8%\text{Mass } \% = \left(\frac{34.02\text{ g/mol}}{62.07\text{ g/mol}}\right) \times 100\% \approx 54.8\%. Ethylene glycol has a significantly higher boiling point (197∘C197^\circ\text{C} vs. 117.7∘C117.7^\circ\text{C} for 1-butanol) because its two hydroxyl groups allow extensive intermolecular hydrogen bonding networks in multiple directions despite having a lower total molar mass.

Loading workspace…