Resources

An external direct-current power supply is connected to an electrolytic cell containing two inert platinum electrodes immersed in an aqueous solution of 1.0 M CuSO4(aq)1.0\text{ M } \text{CuSO}_4(aq). The power supply drives a non-spontaneous decomposition where copper metal plates out at one electrode while oxygen gas evolves at the other: 2Cu2+(aq)+2H2O(l)→2Cu(s)+O2(g)+4H+(aq)2\text{Cu}^{2+}(aq) + 2\text{H}_2\text{O}(l) \rightarrow 2\text{Cu}(s) + \text{O}_2(g) + 4\text{H}^+(aq). (a) Identify which electrode is the anode and which is the cathode. (b) Identify the electric polarity (positive or negative sign) of the anode and cathode in this electrolytic cell. (c) Describe the direction of electron flow with respect to the power supply terminals and the cell electrodes.

Answer and steps

Final answer

(a) Anode: electrode where O2\text{O}_2 evolves (water oxidation), Cathode: electrode where Cu\text{Cu} plates out (copper reduction); (b) Anode is positive (++), Cathode is negative (−-) in an electrolytic cell; (c) Electrons flow from the negative terminal of the power supply to the cathode, and from the anode to the positive terminal of the power supply.

Steps

01

Identify the Anode and Cathode from Half-Reactions

In any electrochemical cell, the fundamental definitions of the electrodes are:

  • Anode: The electrode where oxidation (loss of electrons) occurs.
  • Cathode: The electrode where reduction (gain of electrons) occurs. (A helpful mnemonic is An Ox and Red Cat.)

Separate the given overall reaction into two half-reactions:

  1. Formation of copper metal: CuX2+(aq)+2e−→Cu(s)\ce{Cu^2+}(aq) + 2e^- \rightarrow \ce{Cu}(s) Copper ions gain electrons (reduction). Therefore, the electrode where Cu(s)\ce{Cu}(s) plates out is the cathode.
  2. Evolution of oxygen gas: 2HX2O(l)→OX2(g)+4HX+(aq)+4e−2\ce{H2O}(l) \rightarrow \ce{O2}(g) + 4\ce{H+}(aq) + 4e^- Water molecules lose electrons to produce oxygen gas (oxidation). Therefore, the electrode where OX2(g)\ce{O2}(g) evolves is the anode.

02

Determine Electrode Polarities in an Electrolytic Cell

An electrolytic cell uses an external power supply to drive a non-spontaneous redox reaction:

  • The negative terminal of the DC power supply supplies electrons, pumping them onto the electrode connected to it. This electrode becomes negatively charged and acts as the site of reduction: Cathode=negative (−)\text{Cathode} = \text{negative } (-)
  • The positive terminal of the DC power supply pulls electrons away from the electrode connected to it. This electrode becomes positively charged and acts as the site of oxidation: Anode=positive (+)\text{Anode} = \text{positive } (+)

Common Pitfall: Do not confuse an electrolytic cell with a galvanic (voltaic) cell. In a galvanic cell, the spontaneous release of electrons makes the anode negative and the cathode positive. In an electrolytic cell, the polarities are reversed because an external source forces electrons against their spontaneous direction.


03

Trace the Direction of Electron Flow

Electrons always travel through the external metallic wiring:

  1. Electrons leave the negative terminal (−-) of the DC power supply and flow to the cathode (−-), where CuX2+\ce{Cu^2+} ions consume them.
  2. At the anode (++), water is oxidized, releasing electrons that flow from the anode to the positive terminal (++) of the DC power supply.

Thus, the overall external electron flow is: Anode (+)⟶Positive Terminal (+)⟶Negative Terminal (−)⟶Cathode (−)\text{Anode } (+) \longrightarrow \text{Positive Terminal } (+) \longrightarrow \text{Negative Terminal } (-) \longrightarrow \text{Cathode } (-)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sign conventions of an electrolytic cell with those of a galvanic cell, incorrectly assigning a negative polarity to the anode and a positive polarity to the cathode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    CuX2++2 eX−→Cu\ce{Cu^2+ + 2e^- -> Cu} (reduction at cathode)   ⟹  \implies Cathode: electrode where copper plates out 2HX2O→OX2+4 HX++4 eX−2\ce{H2O -> O2 + 4H^+ + 4e^-} (oxidation at anode)   ⟹  \implies Anode: electrode where oxygen gas evolves

  2. Step 2

    Anode is negative (−-) Cathode is positive (++)

    Correct

    Anode is positive (++) Cathode is negative (−-)

    In an electrolytic cell, the external direct-current power supply forces electrons onto the cathode, making it negatively charged (−-). Simultaneously, the power supply draws electrons away from the anode, making it positively charged (++).

  3. Step 3

    Electrons travel from the negative terminal of the power supply to the cathode, and from the anode to the positive terminal of the power supply.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified oxidation at the anode and reduction at the cathode using half-reactions.

You accurately traced the external path of electrons driven by the DC power supply.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electrode polarity convention confusion in electrolytic cells

You assigned galvanic cell polarities to an electrolytic cell.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the anode with a negative charge and the cathode with a positive charge. While this holds for spontaneous galvanic cells where the anode generates electrons, an electrolytic cell is driven by an external power source that forces electrons onto the cathode (making it negative) and pulls electrons from the anode (making it positive).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Cell Type to Terminal Polarities
  • In an electrolytic cell, the cathode is wired to the negative terminal (−-) and the anode is wired to the positive terminal (++).

  • Always look at the power supply: the electrode connected to the negative terminal receives electrons and acts as the cathode (−-).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that an external DC power source pumps electrons out of its negative terminal into the cell electrode, making that electrode negative (−-).

  2. Because electrons are supplied there, reduction occurs at this negative electrode, defining it as the cathode (−-).

  3. The positive terminal pulls electrons away from the opposite electrode, making it positive (++) and forcing oxidation to occur there, defining it as the anode (++).

Final answer

(a) Anode: electrode where OX2\ce{O2} evolves, Cathode: electrode where Cu\ce{Cu} plates out; (b) Anode is positive (++), Cathode is negative (−-); (c) Electrons flow from the negative terminal of the power supply to the cathode, and from the anode to the positive terminal of the power supply.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the polarity contrast between galvanic and electrolytic cells using the mnemonic PANIC: Positive Anode, Negative Is Cathode (for electrolytic cells).

  • Practice identifying electrode signs when an external power supply or battery charger is connected.

OverviewACEpath Teacher's Diagnosis

02 The student confuses oxidation and reduction definitions, defining the anode as the site of reduction and the cathode as the site of oxidation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Cu2++2e−→Cu\text{Cu}^{2+} + 2e^- \rightarrow \text{Cu} is reduction, so this is the anode where copper plates out   ⟹  \implies 2H2O→O2+4H++4e−2\text{H}_2\text{O} \rightarrow \text{O}_2 + 4\text{H}^+ + 4e^- is oxidation, so this is the cathode where oxygen gas evolves   ⟹  \implies Anode: copper plating electrode, Cathode: oxygen evolving electrode

    Correct

    Cu2++2e−→Cu\text{Cu}^{2+} + 2e^- \rightarrow \text{Cu} is reduction (Cathode: copper plating electrode); 2H2O→O2+4H++4e−2\text{H}_2\text{O} \rightarrow \text{O}_2 + 4\text{H}^+ + 4e^- is oxidation (Anode: oxygen gas evolving electrode)

    You correctly identified which half-reaction is oxidation and which is reduction. However, oxidation always takes place at the anode, and reduction always takes place at the cathode (remember the mnemonic An Ox and Red Cat).

  2. Step 2

    In an electrolytic cell, anode is positive (++)   ⟹  \implies Cathode is negative (−-)

  3. Step 3

    Electrons flow from the negative terminal of the power supply to the cathode (oxygen electrode), and from the anode (copper electrode) to the positive terminal.

    Correct

    Electrons flow from the negative terminal of the power supply to the cathode (copper plating electrode), and from the anode (oxygen evolving electrode) to the positive terminal of the power supply.

    Your understanding of circuit polarity is correct: electrons travel from the negative terminal to the cathode, and from the anode to the positive terminal. Because of the inverted electrode labels from part (a), the physical identity of each electrode was swapped.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the oxidation and reduction half-reactions from the overall chemical equation.

You correctly assigned positive and negative polarities to the anode and cathode for an electrolytic cell.

You correctly traced circuit electron flow relative to the power supply terminals and electrode types.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Anode and cathode definition swap

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated reduction with the anode and oxidation with the cathode instead of applying the universal electrochemical rule that oxidation occurs at the anode and reduction occurs at the cathode.

REASONING PATH
Your ACEpath teacher’s suggested approach
Electrode Reaction Rule
  • In every electrochemical cell (both galvanic and electrolytic), oxidation occurs at the anode and reduction occurs at the cathode.

  • Use the mnemonic An Ox (Anode = Oxidation) and Red Cat (Reduction = Cathode) whenever identifying cell electrodes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify reduction: CuX2+(aq)+2e−→Cu(s)\ce{Cu^2+}(aq) + 2e^- \rightarrow \ce{Cu}(s) gains electrons, so reduction occurs here. By definition, the reduction electrode is the cathode.

  2. Identify oxidation: 2HX2O(l)→OX2(g)+4HX+(aq)+4e−2\ce{H2O}(l) \rightarrow \ce{O2}(g) + 4\ce{H+}(aq) + 4e^- loses electrons, so oxidation occurs here. By definition, the oxidation electrode is the anode.

  3. Trace electron flow: Electrons exit the negative terminal of the power supply to reach the cathode (where Cu\ce{Cu} plates out) and leave the anode (where OX2\ce{O2} evolves) to enter the positive terminal.

Final answer

(a) Anode: oxygen evolving electrode; Cathode: copper plating electrode. (b) Anode is (+)(+); Cathode is (−)(-). (c) Electrons flow from the negative terminal of the power supply to the cathode (copper electrode), and from the anode (oxygen electrode) to the positive terminal.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the universal pairing: Anode ↔\leftrightarrow Oxidation (An Ox) and Cathode ↔\leftrightarrow Reduction (Red Cat).

  • Verify electrode identities before tracing electron flow and assigning physical processes.

OverviewACEpath Teacher's Diagnosis

03 The student reverses the direction of electron flow, believing electrons move from the cell's cathode into the negative terminal of the power supply.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Reduction happens at the cathode : electrode where copper plates out ⟹ Oxidation happens at the anode : electrode where oxygen gas evolves

  2. Step 2

    Anode is positive (+) ⟹ Cathode is negative (-)

  3. Step 3

    Electrons flow from the [positive terminal] to the cathode, and from the cathode back to the negative terminal of the power supply.

    Correct

    Electrons flow from the negative terminal of the power supply to the cathode, and from the anode to the positive terminal of the power supply.

    The negative terminal of the power supply pushes electrons toward the cathode, where they are consumed by reduction. Meanwhile, oxidation at the anode releases electrons, which are pulled into the positive terminal.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definitions of oxidation at the anode and reduction at the cathode to assign each electrode.

You correctly assigned the positive polarity to the anode and the negative polarity to the cathode in an electrolytic cell.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed external electron flow in electrolytic cell

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misunderstood the role of the external DC power supply terminals, confusing the electron source (the negative terminal pushing electrons onto the cathode) with an electron sink.

REASONING PATH
Your ACEpath teacher’s suggested approach
Tracing Electron Flow in Electrolysis
  • The external DC power supply acts as an electron pump: the negative terminal (−-) pushes electrons into the cathode (where reduction consumes them), and the positive terminal (++) pulls electrons away from the anode (where oxidation produces them).

  • Always trace electrons leaving the negative terminal of the power supply toward the site of reduction (cathode), and leaving the site of oxidation (anode) toward the positive terminal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify which electrode consumes electrons: CuX2+(aq)+2e−→Cu(s)\ce{Cu^2+}(aq) + 2e^- \rightarrow \ce{Cu}(s) occurs at the cathode, so electrons must be delivered to the cathode.

  2. Identify which terminal delivers electrons: the negative terminal of the DC power supply supplies electrons, pumping them through the wire to the cathode.

  3. Identify where electrons originate in the cell: 2HX2O(l)→OX2(g)+4HX+(aq)+4e−2\ce{H2O}(l) \rightarrow \ce{O2}(g) + 4\ce{H+}(aq) + 4e^- at the anode releases electrons.

  4. Trace the return path: electrons released at the anode flow through the external circuit into the positive terminal of the power supply.

Final answer

Electrons flow from the negative terminal of the power supply to the cathode, and from the anode to the positive terminal of the power supply.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching the external circuit loop with arrows showing electrons leaving the negative terminal of the battery and returning to the positive terminal.

  • Review how electron consumption during reduction dictates that the cathode must receive electrons from the external circuit.

Lock it in

Similar question

01

Molten sodium chloride (NaCl\ce{NaCl}) is electrolyzed using inert carbon electrodes. Liquid sodium forms at one electrode while chlorine gas evolves at the other. Identify the cathode and state its electric polarity.

Answer

Cathode: the electrode where liquid sodium forms (reduction: NaX++eX−→Na\ce{Na+ + e- -> Na}). Polarity: negative (−-), because the external DC power supply supplies electrons to this electrode.

02

An electroplating bath deposits nickel metal onto an iron spoon from an aqueous NiSOX4\ce{NiSO4} solution. Should the spoon be connected to the positive or negative terminal of the DC power source? Explain your choice.

Answer

Negative terminal. The spoon must serve as the cathode where nickel ions are reduced (NiX2++2 eX−→Ni\ce{Ni^2+ + 2e- -> Ni}). In an electrolytic cell, the cathode is connected to the negative terminal of the power source.

03

A student sets up two cells side by side: Cell A is a spontaneous Zn/Cu\ce{Zn/Cu} Daniell cell, and Cell B is a water electrolyzer driven by a 9V battery. Compare the signs and processes occurring at the anode in Cell A versus the anode in Cell B.

Answer

In both cells, oxidation occurs at the anode. However, in galvanic Cell A, the anode is negative (−-) because spontaneous zinc oxidation produces an excess of electrons. In electrolytic Cell B, the anode is positive (++) because the battery's positive terminal pulls electrons away to oxidize water.

Loading workspace…