Resources

An environmental water treatment facility removes arsenic by oxidizing aqueous arsenite to arsenate in an acidic solution: H3AsO3(aq)→H3AsO4(aq)\text{H}_3\text{AsO}_3(aq) \rightarrow \text{H}_3\text{AsO}_4(aq). If a wastewater stream oxidizes exactly 1.50 mmol1.50\text{ mmol} of H3AsO3\text{H}_3\text{AsO}_3, calculate the total electrical charge transferred in coulombs (C\text{C}), using Faraday's constant F=96485 C/mol e−F = 96485\text{ C/mol }e^-.

Answer and steps

Final answer

289 C289\text{ C}

Steps

01

Balance the oxidation half-reaction in acidic solution

To find the total electrical charge transferred, determine the number of moles of electrons released per mole of HX3AsOX3\ce{H3AsO3} by balancing the oxidation half-reaction in an acidic medium, and then apply Faraday's law.

  1. Balance elements other than O\ce{O} and H\ce{H}: The arsenic atoms are already balanced with one As\ce{As} atom on each side: HX3AsOX3(aq)→HX3AsOX4(aq)\ce{H3AsO3(aq) -> H3AsO4(aq)}
  2. Balance oxygen atoms by adding HX2O\ce{H2O}: The reactant side has 33 oxygen atoms and the product side has 44. Add 1HX2O1\ce{H2O} molecule to the left side: HX3AsOX3(aq)+HX2O(l)→HX3AsOX4(aq)\ce{H3AsO3(aq) + H2O(l) -> H3AsO4(aq)}
  3. Balance hydrogen atoms by adding HX+\ce{H+}: The reactant side now has 3+2=53 + 2 = 5 hydrogen atoms, while the product side has 33. Add 2HX+2\ce{H+} ions to the right side: HX3AsOX3(aq)+HX2O(l)→HX3AsOX4(aq)+2 HX+(aq)\ce{H3AsO3(aq) + H2O(l) -> H3AsO4(aq) + 2H+(aq)}
  4. Balance the electrical charge by adding electrons (eX−\ce{e-}): The left side is neutral (total charge =0= 0), while the right side has a charge of +2+2 from the two protons. Add 2eX−2\ce{e-} to the right side: HX3AsOX3(aq)+HX2O(l)→HX3AsOX4(aq)+2 HX+(aq)+2 eX−\ce{H3AsO3(aq) + H2O(l) -> H3AsO4(aq) + 2H+(aq) + 2e-}

This confirms that each mole of HX3AsOX3\ce{H3AsO3} oxidized releases 2 mol2\text{ mol} of electrons (as the oxidation state of arsenic increases from +3+3 to +5+5).


02

Calculate the moles of electrons transferred

Convert the given quantity of HX3AsOX3\ce{H3AsO3} into moles: nHX3AsOX3=1.50 mmol=1.50×10−3 moln_{\ce{H3AsO3}} = 1.50\text{ mmol} = 1.50 \times 10^{-3}\text{ mol}

Using the stoichiometric mole ratio 2 mol e−1 mol HX3AsOX3\frac{2\text{ mol }e^-}{1\text{ mol }\ce{H3AsO3}}: ne−=2⋅nHX3AsOX3=2⋅(1.50×10−3 mol)=3.00×10−3 mol e−n_{e^-} = 2 \cdot n_{\ce{H3AsO3}} = 2 \cdot (1.50 \times 10^{-3}\text{ mol}) = 3.00 \times 10^{-3}\text{ mol }e^-


03

Compute the total charge in coulombs

Multiply the moles of electrons by Faraday's constant (F=96485 C/mol e−F = 96485\text{ C/mol }e^-): Q=ne−⋅FQ = n_{e^-} \cdot F Q=(3.00×10−3 mol)⋅(96485 C/mol)=289.455 CQ = (3.00 \times 10^{-3}\text{ mol}) \cdot (96485\text{ C/mol}) = 289.455\text{ C}

Rounding to three significant figures gives: Q=289 CQ = 289\text{ C}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert millimoles to moles, multiplying the millimole quantity directly by Faraday's constant and obtaining a charge 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    H3AsO3 has As(+3) and H3AsO4 has As(+5), so n=2e−\text{H}_3\text{AsO}_3\text{ has As(+3) and }\text{H}_3\text{AsO}_4\text{ has As(+5), so } n = 2 e^-

  2. Step 2

    Q=n×F×amount  ⟹  Q=2×96485 C/mol×1.50=289455 CQ = n \times F \times \text{amount} \implies Q = 2 \times 96485\text{ C/mol} \times 1.50 = 289455\text{ C}

    Correct

    Q=2⋅(1.50×10−3 mol)⋅96485 C/mol=289 CQ = 2 \cdot (1.50 \times 10^{-3}\text{ mol}) \cdot 96485\text{ C/mol} = 289\text{ C}

    You substituted the amount directly as 1.501.50 without converting millimoles to moles. Because Faraday's constant has units of C/mol\text{C/mol}, you must convert 1.50 mmol1.50\text{ mmol} to 1.50×10−3 mol1.50 \times 10^{-3}\text{ mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the oxidation numbers of arsenic in both species.

You correctly identified that 22 moles of electrons are transferred per mole of H3AsO3\text{H}_3\text{AsO}_3.

You selected the correct relationship between charge, moles of electrons, and Faraday's constant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission (mmol to mol)

You plugged in the numerical value 1.501.50 directly instead of converting millimoles to moles before multiplying by Faraday's constant.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the unit compatibility between the physical constant (F=96485 C/molF = 96485\text{ C/mol}) and the given quantity in millimoles (1 mmol=10−3 mol1\text{ mmol} = 10^{-3}\text{ mol}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match units to constants
  • Faraday's constant FF is given in coulombs per mole (C/mol\text{C/mol}), requiring all chemical amounts to be in base moles (mol\text{mol}).

  • Always convert metric prefixes (such as mmol\text{mmol} to mol\text{mol} by multiplying by 10−310^{-3}) before carrying out dimensional analysis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the amount of H3AsO3\text{H}_3\text{AsO}_3 to moles: nH3AsO3=1.50 mmol=1.50×10−3 moln_{\text{H}_3\text{AsO}_3} = 1.50\text{ mmol} = 1.50 \times 10^{-3}\text{ mol}.

  2. Calculate moles of electrons transferred: ne−=2×(1.50×10−3 mol)=3.00×10−3 mol e−n_{e^-} = 2 \times (1.50 \times 10^{-3}\text{ mol}) = 3.00 \times 10^{-3}\text{ mol }e^-.

  3. Multiply by Faraday's constant: Q=ne−×F=(3.00×10−3 mol)×96485 C/mol=289.455 CQ = n_{e^-} \times F = (3.00 \times 10^{-3}\text{ mol}) \times 96485\text{ C/mol} = 289.455\text{ C}.

Final answer

289 C289\text{ C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit units next to each number during calculations to catch unit mismatches early.

  • Practice converting metric prefixes like mmol\text{mmol}, μmol\mu\text{mol}, and kmol\text{kmol} into standard scientific notation before entering them into formulas.

OverviewACEpath Teacher's Diagnosis

02 The student assumes a 1-to-1 electron transfer (n = 1) based on the 1:1 stoichiometry of the reaction species rather than the change in arsenic oxidation state.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Moles of HX3AsOX3=1.50×10−3 mol\text{Moles of }\ce{H3AsO3} = 1.50 \times 10^{-3}\text{ mol}

  2. Step 2

    1 mol HX3AsOX3 transfers 1 mol e−1\text{ mol }\ce{H3AsO3}\text{ transfers } 1\text{ mol }e^-

    Correct

    HX3AsOX3+HX2O→HX3AsOX4+2 HX++2 eX−  ⟹  1 mol HX3AsOX3 transfers 2 mol e−\ce{H3AsO3 + H2O -> H3AsO4 + 2H+ + 2e-} \implies 1\text{ mol }\ce{H3AsO3}\text{ transfers } 2\text{ mol }e^-

    In HX3AsOX3\ce{H3AsO3}, the oxidation state of arsenic is +3+3, while in HX3AsOX4\ce{H3AsO4}, it is +5+5. Balancing the oxidation half-reaction in acid reveals that 2 mol2\text{ mol} of electrons are released per mole of HX3AsOX3\ce{H3AsO3}, not 1 mol1\text{ mol}.

  3. Step 3

    Q=1×1.50×10−3 mol×96485 C/mol=144.7 CQ = 1 \times 1.50 \times 10^{-3}\text{ mol} \times 96485\text{ C/mol} = 144.7\text{ C}

    Correct

    Q=2×(1.50×10−3 mol)×96485 C/mol=289 CQ = 2 \times (1.50 \times 10^{-3}\text{ mol}) \times 96485\text{ C/mol} = 289\text{ C}

    You applied Faraday's formula correctly with the values you had, but your final charge is halved due to using n=1n = 1 rather than n=2n = 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted the quantity from millimoles to moles accurately.

You used the correct relationship Q=ne−⋅FQ = n_{e^-} \cdot F with Faraday's constant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect electron stoichiometry in half-reaction

You likely looked at the 1:11:1 stoichiometric ratio between HX3AsOX3\ce{H3AsO3} and HX3AsOX4\ce{H3AsO4} and assumed 1 mol e−1\text{ mol }e^- was transferred without balancing the half-reaction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to determine the change in oxidation number or balance the half-reaction using water and protons before identifying the number of moles of electrons transferred.

REASONING PATH
Your ACEpath teacher’s suggested approach
Assign Oxidation States
  • Calculate the oxidation state of the central atom before and after the reaction: ΔO.S.=O.S.final−O.S.initial\Delta\text{O.S.} = \text{O.S.}_{\text{final}} - \text{O.S.}_{\text{initial}}.

  • For HX3AsOX3\ce{H3AsO3}, As\text{As} is +3+3; for HX3AsOX4\ce{H3AsO4}, As\text{As} is +5+5. The change of +2+2 means 2 mol e−2\text{ mol }e^- are released per mole of arsenic oxidized.

Balance Half-Reactions in Acid
  • Balance oxygen by adding HX2O\ce{H2O}, balance hydrogen by adding HX+\ce{H+}, and balance total charge by adding electrons (e−e^-).

  • Always write out HX3AsOX3+HX2O→HX3AsOX4+2 HX++2 eX−\ce{H3AsO3 + H2O -> H3AsO4 + 2H+ + 2e-} to directly verify the electron coefficient.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Balance the half-reaction in acidic medium: HX3AsOX3(aq)+HX2O(l)→HX3AsOX4(aq)+2 HX+(aq)+2 eX−\ce{H3AsO3(aq) + H2O(l) -> H3AsO4(aq) + 2H+(aq) + 2e-}.

  2. Calculate total moles of electrons transferred: ne−=2×(1.50×10−3 mol)=3.00×10−3 mol e−n_{e^-} = 2 \times (1.50 \times 10^{-3}\text{ mol}) = 3.00 \times 10^{-3}\text{ mol }e^-.

  3. Calculate the total charge: Q=ne−⋅F=(3.00×10−3 mol)×96485 C/mol=289.455 C≈289 CQ = n_{e^-} \cdot F = (3.00 \times 10^{-3}\text{ mol}) \times 96485\text{ C/mol} = 289.455\text{ C} \approx 289\text{ C}.

Final answer

289 C289\text{ C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice finding oxidation numbers for central atoms in oxyacids and polyatomic ions.

  • Work through balancing redox half-reactions using the standard HX2O\ce{H2O}/HX+\ce{H+} method before calculating electrical charge.

OverviewACEpath Teacher's Diagnosis

03 The student counts the difference in oxygen atoms as the electron transfer number, assuming n = 1 mole of electrons transferred per atom of oxygen added.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Amount of HX3AsOX3=1.50×10−3 mol\text{Amount of } \ce{H3AsO3} = 1.50 \times 10^{-3}\text{ mol}

  2. Step 2

    +3 to +4, so n=1+3\text{ to }+4\text{, so } n = 1

    Correct

    HX3AsOX3→HX3AsOX4  ⟹  As+3→As+5+2e−, so n=2\ce{H3AsO3} \rightarrow \ce{H3AsO4} \implies \text{As}^{+3} \rightarrow \text{As}^{+5} + 2e^-\text{, so } n = 2

    You correctly found the oxidation state of As\ce{As} in HX3AsOX3\ce{H3AsO3} as +3+3, but in HX3AsOX4\ce{H3AsO4}, with three +1+1 hydrogens and four −2-2 oxygens, arsenic must balance to +5+5 (3(+1)+x+4(−2)=0  ⟹  x=+53(+1) + x + 4(-2) = 0 \implies x = +5). Balancing the half-reaction HX3AsOX3+HX2O→HX3AsOX4+2 HX++2 eX−\ce{H3AsO3 + H2O -> H3AsO4 + 2H+ + 2e-} also confirms that 2 mol e−2\text{ mol } e^- are transferred per mole of HX3AsOX3\ce{H3AsO3}.

  3. Step 3

    Q=1×1.50×10−3 mol×96485 C/mol=144.73 CQ = 1 \times 1.50 \times 10^{-3}\text{ mol} \times 96485\text{ C/mol} = 144.73\text{ C}

    Correct

    Q=2×(1.50×10−3 mol)×96485 C/mol=289 CQ = 2 \times (1.50 \times 10^{-3}\text{ mol}) \times 96485\text{ C/mol} = 289\text{ C}

    You applied Faraday's equation Q=n⋅FQ = n \cdot F correctly, but your final value was halved due to the incorrect electron transfer number from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the given amount from millimoles to moles.

You correctly identified that total charge is calculated using Faraday's constant via Q=ne−⋅FQ = n_{e^-} \cdot F.

You correctly determined that arsenic has an oxidation state of +3+3 in arsenite (HX3AsOX3\ce{H3AsO3}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Oxidation State / Electron Stoichiometry

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You miscalculated the oxidation number of arsenic in arsenate (HX3AsOX4\ce{H3AsO4}) as +4+4 instead of +5+5, leading to an electron count of n=1n = 1 instead of n=2n = 2. Alternatively, setting up the balanced half-reaction in acidic medium with HX2O\ce{H2O} and HX+\ce{H+} avoids oxidation-number slips by directly balancing charge with electrons.

REASONING PATH
Your ACEpath teacher’s suggested approach
Calculate Oxidation State
  • In a neutral compound, the sum of all oxidation numbers is zero: ∑ON=0\sum \text{ON} = 0. For HX3AsOX4\ce{H3AsO4}, 3(+1)+ONAs+4(−2)=0  ⟹  ONAs=+53(+1) + \text{ON}_{\ce{As}} + 4(-2) = 0 \implies \text{ON}_{\ce{As}} = +5.

  • Always set up an explicit algebraic equation for the central atom rather than estimating from the oxygen count.

Balance the Half-Reaction
  • In acidic solution: balance O\ce{O} using HX2O\ce{H2O}, balance H\ce{H} using HX+\ce{H+}, and balance net charge using e−e^-.

  • Write out HX3AsOX3+HX2O→HX3AsOX4+2 HX++2 eX−\ce{H3AsO3 + H2O -> H3AsO4 + 2H+ + 2e-} to double-check that the electron coefficient matches the oxidation-state change.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the change in oxidation number: in HX3AsOX3\ce{H3AsO3}, As\text{As} is +3+3; in HX3AsOX4\ce{H3AsO4}, 3(+1)+As+4(−2)=0  ⟹  As=+53(+1) + \text{As} + 4(-2) = 0 \implies \text{As} = +5.

  2. Calculate the moles of electrons: ne−=2×(1.50×10−3 mol)=3.00×10−3 mol e−n_{e^-} = 2 \times (1.50 \times 10^{-3}\text{ mol}) = 3.00 \times 10^{-3}\text{ mol } e^-.

  3. Multiply by Faraday's constant: Q=(3.00×10−3 mol)×(96485 C/mol)=289.455 CQ = (3.00 \times 10^{-3}\text{ mol}) \times (96485\text{ C/mol}) = 289.455\text{ C}.

Final answer

289 C289\text{ C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice assigning oxidation numbers to central p-block elements in oxyacids (like HX3POX3\ce{H3PO3} vs HX3POX4\ce{H3PO4}, and HNOX2\ce{HNO2} vs HNOX3\ce{HNO3}).

  • Use the half-reaction method with HX2O\ce{H2O} and HX+\ce{H+} as a second independent check whenever calculating charge in electrochemistry problems.

Lock it in

Similar question

01

An electroplating cell reduces aqueous Cu2+\text{Cu}^{2+} to solid Cu\text{Cu}. Calculate the electrical charge in coulombs needed to reduce 2.50 mmol2.50\text{ mmol} of Cu2+\text{Cu}^{2+}. Use F=96485 C/mol e−F = 96485\text{ C/mol }e^-.

Answer

482 C482\text{ C}. Reduction half-reaction: Cu2++2e−→Cu\text{Cu}^{2+} + 2e^- \rightarrow \text{Cu}. Total electron moles: ne−=2×(2.50×10−3 mol)=5.00×10−3 moln_{e^-} = 2 \times (2.50 \times 10^{-3}\text{ mol}) = 5.00 \times 10^{-3}\text{ mol}. Charge: Q=(5.00×10−3 mol)×96485 C/mol=482.4 C≈482 CQ = (5.00 \times 10^{-3}\text{ mol}) \times 96485\text{ C/mol} = 482.4\text{ C} \approx 482\text{ C}.

02

In an acidic solution, iron(II) is oxidized to iron(III) by permanganate: Fe2+(aq)→Fe3+(aq)+e−\text{Fe}^{2+}(aq) \rightarrow \text{Fe}^{3+}(aq) + e^-. If a constant current transfers 579 C579\text{ C} of charge, how many millimoles of Fe2+\text{Fe}^{2+} were oxidized? Use F=96485 C/mol e−F = 96485\text{ C/mol }e^-.

Answer

6.00 mmol6.00\text{ mmol}. Moles of electrons: ne−=QF=579 C96485 C/mol=6.00×10−3 moln_{e^-} = \frac{Q}{F} = \frac{579\text{ C}}{96485\text{ C/mol}} = 6.00 \times 10^{-3}\text{ mol}. Since 1 mol e−1\text{ mol }e^- is produced per 1 mol Fe2+1\text{ mol }\text{Fe}^{2+}, nFe2+=6.00×10−3 mol=6.00 mmoln_{\text{Fe}^{2+}} = 6.00 \times 10^{-3}\text{ mol} = 6.00\text{ mmol}.

03

Dichromate oxidizes sulfur dioxide in acidic wastewater: SO2(g)+2H2O(l)→SO42−(aq)+4H+(aq)+2e−\text{SO}_2(g) + 2\text{H}_2\text{O}(l) \rightarrow \text{SO}_4^{2-}(aq) + 4\text{H}^+(aq) + 2e^-. If 0.480 g0.480\text{ g} of SO2\text{SO}_2 (molar mass 64.07 g/mol64.07\text{ g/mol}) reacts completely, calculate the total charge transferred in coulombs. Use F=96485 C/mol e−F = 96485\text{ C/mol }e^-.

Answer

1.45×103 C1.45 \times 10^3\text{ C} (or 1446 C1446\text{ C}). Moles of SO2\text{SO}_2: n=0.480 g64.07 g/mol=7.492×10−3 moln = \frac{0.480\text{ g}}{64.07\text{ g/mol}} = 7.492 \times 10^{-3}\text{ mol}. Moles of electrons: ne−=2×7.492×10−3 mol=1.498×10−2 moln_{e^-} = 2 \times 7.492 \times 10^{-3}\text{ mol} = 1.498 \times 10^{-2}\text{ mol}. Charge: Q=(1.498×10−2 mol)×96485 C/mol=1446 C≈1.45×103 CQ = (1.498 \times 10^{-2}\text{ mol}) \times 96485\text{ C/mol} = 1446\text{ C} \approx 1.45 \times 10^3\text{ C}.

Loading workspace…