Resources

A sealed cylinder fitted with a frictionless piston contains an ideal gas that undergoes a thermodynamic process. In this process, the internal energy of the system increases by ΔU=+485 J\Delta U = +485\text{ J} while releasing q=−215 Jq = -215\text{ J} of heat to the surroundings. The gas is compressed by a constant external pressure of Pext=2.50 atmP_{\text{ext}} = 2.50\text{ atm}. Rather than solving for energy, determine the change in volume ΔV\Delta V (in L\text{L}) of the system during this compression. (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J})

Answer and steps

Final answer

ΔV=−2.76 L\Delta V = -2.76\text{ L}

Steps

01

Calculate the work done on the system (ww)

To determine the change in volume ΔV\Delta V of the gas, we apply the First Law of Thermodynamics and the definition of pressure-volume work.

The First Law of Thermodynamics states that the change in internal energy (ΔU\Delta U) of a closed system is the sum of the heat transferred to the system (qq) and the work done on the system (ww): ΔU=q+w\Delta U = q + w

Rearranging for work (ww): w=ΔU−qw = \Delta U - q

Substitute the given values (ΔU=+485 J\Delta U = +485\text{ J} and q=−215 Jq = -215\text{ J}): w=485 J−(−215 J)=485 J+215 J=+700 Jw = 485\text{ J} - (-215\text{ J}) = 485\text{ J} + 215\text{ J} = +700\text{ J}

The positive sign indicates that net work is performed on the gas by the surroundings during the compression.


02

Relate work to pressure and volume change

For a process occurring against a constant external pressure (PextP_{\text{ext}}), work is defined by: w=−PextΔVw = -P_{\text{ext}}\Delta V

Rearranging to solve for the volume change ΔV\Delta V: ΔV=−wPext\Delta V = -\frac{w}{P_{\text{ext}}}


03

Convert units and calculate ΔV\Delta V

First, convert the work from Joules (J\text{J}) to liter-atmospheres (L⋅atm\text{L}\cdot\text{atm}) using the conversion factor 1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}: w=700 J101.325 J/(L⋅atm)≈6.9085 L⋅atmw = \frac{700\text{ J}}{101.325\text{ J}/(\text{L}\cdot\text{atm})} \approx 6.9085\text{ L}\cdot\text{atm}

Now, substitute ww and Pext=2.50 atmP_{\text{ext}} = 2.50\text{ atm} into the expression for ΔV\Delta V: ΔV=−6.9085 L⋅atm2.50 atm≈−2.7634 L\Delta V = -\frac{6.9085\text{ L}\cdot\text{atm}}{2.50\text{ atm}} \approx -2.7634\text{ L}

Rounding to three significant figures gives: ΔV=−2.76 L\Delta V = -2.76\text{ L}

(Common Pitfall: Forgetting the negative sign in w=−PextΔVw = -P_{\text{ext}}\Delta V. Since work is done on the system (w>0w > 0) during compression, the volume must decrease, which corresponds to a negative change in volume, ΔV<0\Delta V < 0.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the pressure-volume work formula as w = P_ext * ΔV without the negative sign, resulting in a positive volume change of +2.76 L for compression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔU=q+w  ⟹  w=ΔU−q=485−(−215)=700 J\Delta U = q + w \implies w = \Delta U - q = 485 - (-215) = 700\text{ J}

  2. Step 2

    w=Pext∗ΔVw = P_{\text{ext}} * \Delta V

    Correct

    w=−PextΔVw = -P_{\text{ext}}\Delta V

    In chemistry, thermodynamic work done on the system is defined with a negative sign: w=−PextΔVw = -P_{\text{ext}}\Delta V. During compression, energy enters the system as work (w>0w > 0), which requires the volume to decrease (ΔV<0\Delta V < 0).

  3. Step 3

    ΔV=wPext=7002.50∗101.325=2.76 L\Delta V = \frac{w}{P_{\text{ext}}} = \frac{700}{2.50 * 101.325} = 2.76\text{ L}

    Correct

    ΔV=−wPext=−700 J2.50 atm×101.325 J/(L⋅atm)=−2.76 L\Delta V = -\frac{w}{P_{\text{ext}}} = -\frac{700\text{ J}}{2.50\text{ atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm})} = -2.76\text{ L}

    Your unit conversion and arithmetic were accurate, but the missing negative sign carried through to make the volume change positive.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the First Law of Thermodynamics (ΔU=q+w\Delta U = q + w).

You properly treated released heat as a negative value (q=−215 Jq = -215\text{ J}).

You correctly used the conversion factor 1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in work formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You omitted the negative sign in the pressure-volume work equation w=−PextΔVw = -P_{\text{ext}}\Delta V, forgetting that work done on the system (w>0w > 0) must correspond to a decrease in volume (ΔV<0\Delta V < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Sign Conventions for $P\text{-}V$ Work
  • w=−PextΔVw = -P_{\text{ext}}\Delta V, where ΔV=Vfinal−Vinitial\Delta V = V_{\text{final}} - V_{\text{initial}}. Compression means ΔV<0  ⟹  w>0\Delta V < 0 \implies w > 0 (work done on the gas). Expansion means ΔV>0  ⟹  w<0\Delta V > 0 \implies w < 0 (work done by the gas).

  • Always write w=−PextΔVw = -P_{\text{ext}}\Delta V with the leading negative sign, and double-check that 'compression' leads to a negative ΔV\Delta V.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the definition of work for constant external pressure: w=−PextΔVw = -P_{\text{ext}}\Delta V.

  2. Rearrange for volume change: ΔV=−wPext\Delta V = -\frac{w}{P_{\text{ext}}}.

  3. Substitute w=+700 Jw = +700\text{ J} and convert units: ΔV=−700 J2.50 atm×101.325 J/(L⋅atm)=−2.76 L\Delta V = -\frac{700\text{ J}}{2.50\text{ atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm})} = -2.76\text{ L}.

Final answer

ΔV=−2.76 L\Delta V = -2.76\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the IUPAC definition w=−PextΔVw = -P_{\text{ext}}\Delta V and review why the negative sign is necessary from an energy-transfer perspective.

  • Perform a physical sanity check after solving: compression must yield ΔV<0\Delta V < 0, while expansion must yield ΔV>0\Delta V > 0.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts heat released directly as w = ΔU - |q| = 485 - 215 = 270 J by treating heat released as positive, leading to an incorrect volume change of -1.07 L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔU=q+w  ⟹  w=485−215=270 J\Delta U = q + w \implies w = 485 - 215 = 270\text{ J}

    Correct

    w=ΔU−q=485 J−(−215 J)=+700 Jw = \Delta U - q = 485\text{ J} - (-215\text{ J}) = +700\text{ J}

    You correctly wrote the First Law relationship ΔU=q+w\Delta U = q + w, but heat released to the surroundings must enter the equation with a negative sign (q=−215 Jq = -215\text{ J}). Rearranging gives w=ΔU−q=485 J−(−215 J)=+700 Jw = \Delta U - q = 485\text{ J} - (-215\text{ J}) = +700\text{ J}.

  2. Step 2

    w=−Pext∗ΔV  ⟹  ΔV=−2702.50∗101.325=−1.07 Lw = -P_{\text{ext}} * \Delta V \implies \Delta V = \frac{-270}{2.50 * 101.325} = -1.07\text{ L}

    Correct

    ΔV=−wPext=−700 J2.50 atm×101.325 J/(L⋅atm)=−2.76 L\Delta V = -\frac{w}{P_{\text{ext}}} = -\frac{700\text{ J}}{2.50\text{ atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm})} = -2.76\text{ L}

    Your formula w=−PextΔVw = -P_{\text{ext}}\Delta V and unit conversion factor were applied correctly, but using the incorrect value of w=270 Jw = 270\text{ J} led to an incorrect value for ΔV\Delta V.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the First Law of Thermodynamics, ΔU=q+w\Delta U = q + w.

You used the correct relationship between work and volume change, w=−PextΔVw = -P_{\text{ext}}\Delta V.

You applied the correct unit conversion factor between L⋅atm\text{L}\cdot\text{atm} and Joules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in First Law rearrangement

You substituted ∣q∣=215 J|q| = 215\text{ J} rather than q=−215 Jq = -215\text{ J} when solving for work.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the physical magnitude of heat released with its algebraic signed value in ΔU=q+w\Delta U = q + w caused you to subtract 215 J215\text{ J} rather than subtracting −215 J-215\text{ J}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Assign Thermodynamic Signs Explicitly
  • Heat released by the system is always negative (q<0q < 0), and heat absorbed is always positive (q>0q > 0).

  • Write out the signed values before doing algebra: q=−215 Jq = -215\text{ J} and ΔU=+485 J\Delta U = +485\text{ J}.

Preserve Double Negatives in Isolation
  • Rearranging ΔU=q+w\Delta U = q + w yields w=ΔU−qw = \Delta U - q.

  • Insert parentheses around signed values so that subtracting a negative value correctly becomes an addition: 485−(−215)=700 J485 - (-215) = 700\text{ J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the signed heat value: w=ΔU−q=485 J−(−215 J)=+700 Jw = \Delta U - q = 485\text{ J} - (-215\text{ J}) = +700\text{ J}.

  2. Rearrange w=−PextΔVw = -P_{\text{ext}}\Delta V to isolate volume change: ΔV=−wPext\Delta V = -\frac{w}{P_{\text{ext}}}.

  3. Convert pressure to compatible units or apply the conversion factor directly: ΔV=−700 J2.50 atm×101.325 J/(L⋅atm)=−2.7634 L\Delta V = -\frac{700\text{ J}}{2.50\text{ atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm})} = -2.7634\text{ L}.

Final answer

ΔV=−2.76 L\Delta V = -2.76\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out each thermodynamic quantity with an explicit sign (++ or −-) before plugging numbers into equations.

  • Use parentheses when substituting negative numbers to avoid dropping minus signs during algebraic rearrangement.

  • Perform a physical reality check: if internal energy rises despite heat leaving, the surroundings must have performed substantial work on the system (w>ΔUw > \Delta U).

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by the conversion factor 101.325 J/(L·atm) instead of dividing, resulting in an incorrect volume change of -2.84 * 10⁴ L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔU=q+w  ⟹  w=485−(−215)=700 J\Delta U = q + w \implies w = 485 - (-215) = 700\text{ J}

  2. Step 2

    w=−Pext∗ΔVw = -P_{\text{ext}} * \Delta V

  3. Step 3

    ΔV=−7002.50∗101.325=−28371 L\Delta V = \frac{-700}{2.50} * 101.325 = -28371\text{ L}

    Correct

    ΔV=−700 J2.50 atm×101.325 J/(L⋅atm)≈−2.76 L\Delta V = -\frac{700\text{ J}}{2.50\text{ atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm})} \approx -2.76\text{ L}

    Because 1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}, converting Joules into L⋅atm\text{L}\cdot\text{atm} requires dividing by 101.325 J/(L⋅atm)101.325\text{ J}/(\text{L}\cdot\text{atm}), not multiplying.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the First Law of Thermodynamics, ΔU=q+w\Delta U = q + w, with the proper sign convention for heat released.

You correctly identified the formula for pressure-volume work, w=−PextΔVw = -P_{\text{ext}}\Delta V, and correctly placed the negative sign for compression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted conversion factor between Joules and liter-atmospheres

You set up the ratio −wPext\frac{-w}{P_{\text{ext}}} correctly, but multiplied by 101.325101.325 rather than dividing by 101.325 J/(L⋅atm)101.325\text{ J}/(\text{L}\cdot\text{atm}) to cancel Joules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating conversion factors as bare numbers rather than algebraic unit fractions, which obscures whether units cancel or multiply.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis
  • Set up conversion factors so that unwanted units explicitly cancel in the numerator and denominator.

  • Write out the units explicitly: Jatm×1 L⋅atm101.325 J=L\frac{\text{J}}{\text{atm}} \times \frac{1\text{ L}\cdot\text{atm}}{101.325\text{ J}} = \text{L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert work from Joules to L⋅atm\text{L}\cdot\text{atm}: w=700 J101.325 J/(L⋅atm)≈6.9085 L⋅atmw = \frac{700\text{ J}}{101.325\text{ J}/(\text{L}\cdot\text{atm})} \approx 6.9085\text{ L}\cdot\text{atm}.

  2. Substitute into ΔV=−wPext\Delta V = -\frac{w}{P_{\text{ext}}}: ΔV=−6.9085 L⋅atm2.50 atm≈−2.7634 L\Delta V = -\frac{6.9085\text{ L}\cdot\text{atm}}{2.50\text{ atm}} \approx -2.7634\text{ L}.

Final answer

ΔV=−2.76 L\Delta V = -2.76\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write units alongside numerical values during dimensional analysis.

  • Perform a quick sanity check: compressing a laboratory cylinder under 2.50 atm2.50\text{ atm} should produce a volume change of a few liters, not tens of thousands of liters.

Lock it in

Similar question

01

An ideal gas expands from an initial volume of 1.20 L1.20\text{ L} to a final volume of 3.70 L3.70\text{ L} against a constant external pressure of 1.50 atm1.50\text{ atm}. Calculate the work done on the gas in Joules. (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J})

Answer

ΔV=3.70 L−1.20 L=+2.50 L\Delta V = 3.70\text{ L} - 1.20\text{ L} = +2.50\text{ L}. Using w=−PextΔVw = -P_{\text{ext}}\Delta V: w=−(1.50 atm)(2.50 L)=−3.75 L⋅atmw = -(1.50\text{ atm})(2.50\text{ L}) = -3.75\text{ L}\cdot\text{atm}. Converting to Joules: w=−3.75 L⋅atm×101.325 J/(L⋅atm)=−380 Jw = -3.75\text{ L}\cdot\text{atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm}) = -380\text{ J}.

02

During a thermodynamic process, a gas is compressed by an external pressure of 4.00 atm4.00\text{ atm}, resulting in w=+850 Jw = +850\text{ J} of work done on the system. Determine the change in volume ΔV\Delta V of the gas in liters. (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J})

Answer

Rearranging w=−PextΔVw = -P_{\text{ext}}\Delta V gives ΔV=−wPext\Delta V = -\frac{w}{P_{\text{ext}}}. Convert pressure to J/L\text{J}/\text{L}: Pext=4.00 atm×101.325 J/(L⋅atm)=405.3 J/LP_{\text{ext}} = 4.00\text{ atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm}) = 405.3\text{ J}/\text{L}. Thus, ΔV=−850 J405.3 J/L=−2.10 L\Delta V = -\frac{850\text{ J}}{405.3\text{ J}/\text{L}} = -2.10\text{ L}.

03

A sealed cylinder contains a gas that absorbs 320 J320\text{ J} of heat while its internal energy decreases by 180 J180\text{ J} (ΔU=−180 J\Delta U = -180\text{ J}). If the process occurs against a constant external pressure of 1.25 atm1.25\text{ atm}, determine the volume change ΔV\Delta V of the gas in liters. (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J})

Answer

By the First Law: w=ΔU−q=−180 J−320 J=−500 Jw = \Delta U - q = -180\text{ J} - 320\text{ J} = -500\text{ J}. Then, using ΔV=−wPext\Delta V = -\frac{w}{P_{\text{ext}}}: ΔV=−−500 J1.25 atm×101.325 J/(L⋅atm)=+3.95 L\Delta V = -\frac{-500\text{ J}}{1.25\text{ atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm})} = +3.95\text{ L}.

Loading workspace…