Resources

An unknown pure organic solvent exhibits a triple point at Tt=180.0 KT_t = 180.0\text{ K} and Pt=0.080 atmP_t = 0.080\text{ atm}. A student monitors an isothermal compression of the vapor phase at a fixed temperature T0T_0. Condensation of vapor directly into liquid is observed at an equilibrium pressure of P=0.650 atmP = 0.650\text{ atm}. Given that the molar enthalpy of vaporization is ΔHvap=28.5 kJ/mol\Delta H_{\text{vap}} = 28.5\text{ kJ/mol}, the gas constant is R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, and assuming ideal gas behavior of the vapor, reverse-engineer the isothermal operating temperature T0T_0 in Kelvin from the liquid-vapor coexistence relation ln⁡(PPt)=−ΔHvapR(1T0−1Tt)\ln\left(\frac{P}{P_t}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_0} - \frac{1}{T_t}\right).

Answer and steps

Final answer

T0=202 KT_0 = 202\text{ K}

Steps

01

Identify and convert the given values

To determine the isothermal operating temperature T0T_0, we use the integrated form of the Clausius-Clapeyron equation along the liquid-vapor coexistence boundary: ln⁡(PPt)=−ΔHvapR(1T0−1Tt)\ln\left(\frac{P}{P_t}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_0} - \frac{1}{T_t}\right)

  • Triple-point pressure: Pt=0.080 atmP_t = 0.080\text{ atm}
  • Triple-point temperature: Tt=180.0 KT_t = 180.0\text{ K}
  • Condensation vapor pressure: P=0.650 atmP = 0.650\text{ atm}
  • Enthalpy of vaporization: ΔHvap=28.5 kJ/mol=28,500 J/mol\Delta H_{\text{vap}} = 28.5\text{ kJ/mol} = 28{,}500\text{ J/mol}
  • Ideal gas constant: R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}

Common Pitfall: Ensure the units of ΔHvap\Delta H_{\text{vap}} match the units of the gas constant RR. Using kJ/mol\text{kJ/mol} instead of J/mol\text{J/mol} without converting will cause an error by a factor of 10001000.


02

Compute the pressure ratio and its natural logarithm

PPt=0.650 atm0.080 atm=8.125\frac{P}{P_t} = \frac{0.650\text{ atm}}{0.080\text{ atm}} = 8.125

ln⁡(PPt)=ln⁡(8.125)≈2.0950\ln\left(\frac{P}{P_t}\right) = \ln(8.125) \approx 2.0950


03

Rearrange the Clausius-Clapeyron equation for 1T0\frac{1}{T_0}

Distributing the negative sign gives: ln⁡(PPt)=ΔHvapR(1Tt−1T0)\ln\left(\frac{P}{P_t}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_t} - \frac{1}{T_0}\right)

Divide both sides by ΔHvapR\frac{\Delta H_{\text{vap}}}{R}: 1Tt−1T0=RΔHvapln⁡(PPt)\frac{1}{T_t} - \frac{1}{T_0} = \frac{R}{\Delta H_{\text{vap}}}\ln\left(\frac{P}{P_t}\right)

Rearranging to isolate 1T0\frac{1}{T_0}: 1T0=1Tt−Rln⁡(PPt)ΔHvap\frac{1}{T_0} = \frac{1}{T_t} - \frac{R\ln\left(\frac{P}{P_t}\right)}{\Delta H_{\text{vap}}}


04

Substitute the values and solve for T0T_0

Calculate each term: 1Tt=1180.0 K≈5.556×10−3 K−1\frac{1}{T_t} = \frac{1}{180.0\text{ K}} \approx 5.556 \times 10^{-3}\text{ K}^{-1}

Rln⁡(PPt)ΔHvap=(8.314 J/(mol⋅K))(2.0950)28,500 J/mol≈6.112×10−4 K−1\frac{R\ln\left(\frac{P}{P_t}\right)}{\Delta H_{\text{vap}}} = \frac{(8.314\text{ J/(mol}\cdot\text{K)})(2.0950)}{28{,}500\text{ J/mol}} \approx 6.112 \times 10^{-4}\text{ K}^{-1}

Subtracting the two terms: 1T0=5.556×10−3 K−1−6.112×10−4 K−1≈4.945×10−3 K−1\frac{1}{T_0} = 5.556 \times 10^{-3}\text{ K}^{-1} - 6.112 \times 10^{-4}\text{ K}^{-1} \approx 4.945 \times 10^{-3}\text{ K}^{-1}

Taking the reciprocal: T0=14.945×10−3 K−1≈202.2 K≈202 KT_0 = \frac{1}{4.945 \times 10^{-3}\text{ K}^{-1}} \approx 202.2\text{ K} \approx 202\text{ K}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert ΔHvap from kJ/mol to J/mol, making the enthalpy term off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ln⁡(0.6500.080)=−(28.58.314)∗(1T0−1180.0)\ln\left(\frac{0.650}{0.080}\right) = -\left(\frac{28.5}{8.314}\right) * \left(\frac{1}{T_0} - \frac{1}{180.0}\right)

    Correct

    ln⁡(0.6500.080)=−(28,500 J/mol8.314 J/(mol⋅K))∗(1T0−1180.0 K)\ln\left(\frac{0.650}{0.080}\right) = -\left(\frac{28{,}500\text{ J/mol}}{8.314\text{ J/(mol}\cdot\text{K)}}\right) * \left(\frac{1}{T_0} - \frac{1}{180.0\text{ K}}\right)

    You substituted ΔHvap=28.5 kJ/mol\Delta H_{\text{vap}} = 28.5\text{ kJ/mol} directly alongside R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}. Because one is in kilojoules and the other is in joules, you must convert ΔHvap\Delta H_{\text{vap}} to 28,500 J/mol28{,}500\text{ J/mol} (or convert RR to 8.314×10−3 kJ/(mol⋅K)8.314 \times 10^{-3}\text{ kJ/(mol}\cdot\text{K)}).

  2. Step 2

    2.0949=−3.428∗(1T0−0.005556)  ⟹  1T0−0.005556=−0.61112.0949 = -3.428 * \left(\frac{1}{T_0} - 0.005556\right) \implies \frac{1}{T_0} - 0.005556 = -0.6111

    Correct

    2.0950=−3428∗(1T0−0.005556)  ⟹  1T0−0.005556=−6.112×10−42.0950 = -3428 * \left(\frac{1}{T_0} - 0.005556\right) \implies \frac{1}{T_0} - 0.005556 = -6.112 \times 10^{-4}

    Your algebra in dividing both sides by the ratio −ΔHvap/R-\Delta H_{\text{vap}}/R was executed correctly, but the numerical value carries over the factor-of-1000 unit error from Step 1.

  3. Step 3

    1T0=−0.6055 K−1\frac{1}{T_0} = -0.6055\text{ K}^{-1}

    Correct

    1T0=0.005556−0.0006112=4.945×10−3 K−1\frac{1}{T_0} = 0.005556 - 0.0006112 = 4.945 \times 10^{-3}\text{ K}^{-1}

    You correctly added 0.0055560.005556 to both sides, but because −0.6111-0.6111 was three orders of magnitude too large, it yielded an impossible negative reciprocal temperature.

  4. Step 4

    T0=−1.65 KT_0 = -1.65\text{ K}

    Correct

    T0=14.945×10−3 K−1≈202 KT_0 = \frac{1}{4.945 \times 10^{-3}\text{ K}^{-1}} \approx 202\text{ K}

    You inverted the reciprocal temperature correctly, but the resulting negative value reflects the upstream unit mismatch.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct integrated form of the Clausius-Clapeyron equation for liquid-vapor equilibrium.

You correctly matched the triple-point conditions (Tt,Pt)(T_t, P_t) and condensation conditions (T0,P)(T_0, P).

You performed the algebraic rearrangements and reciprocals systematically.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit mismatch between enthalpy and gas constant

You plugged in ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol} while using RR in J/(mol⋅K)\text{J/(mol}\cdot\text{K)}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that thermodynamic state functions (such as enthalpy and entropy) are typically tabulated in kJ/mol\text{kJ/mol}, whereas universal gas constants such as R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} are given in base SI units (joules). Whenever an absolute temperature on the Kelvin scale evaluates to a negative number, check for an energy unit discrepancy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Energy Units Before Computing
  • In ΔHRT\frac{\Delta H}{RT}, both ΔH\Delta H and RR must share the same prefix (either both J\text{J} or both kJ\text{kJ}).

  • Always rewrite ΔH\Delta H in base units ( ×103 J/mol\,\times 10^3\text{ J/mol}) before entering numbers into your calculator.

Physical Reasonableness of Kelvin Temperatures
  • Thermodynamic temperature TT must always be strictly positive (T>0 KT > 0\text{ K}).

  • If you obtain T<0 KT < 0\text{ K} or an unrealistically small temperature, immediately look for a missing factor of 10001000 or an inverted sign in (1T1−1T2)(\frac{1}{T_1} - \frac{1}{T_2}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert ΔHvap\Delta H_{\text{vap}} to base units: ΔHvap=28.5 kJ/mol=28,500 J/mol\Delta H_{\text{vap}} = 28.5\text{ kJ/mol} = 28{,}500\text{ J/mol}.

  2. Compute the ratio: ΔHvapR=28,5008.314≈3427.95 K\frac{\Delta H_{\text{vap}}}{R} = \frac{28{,}500}{8.314} \approx 3427.95\text{ K}.

  3. Substitute into the Clausius-Clapeyron equation: ln⁡(0.6500.080)=−3427.95(1T0−1180.0)\ln\left(\frac{0.650}{0.080}\right) = -3427.95\left(\frac{1}{T_0} - \frac{1}{180.0}\right).

  4. Evaluate the logarithmic term: ln⁡(8.125)≈2.0950\ln(8.125) \approx 2.0950.

  5. Divide by −3427.95-3427.95: 1T0−1180.0=−2.09503427.95≈−6.1115×10−4 K−1\frac{1}{T_0} - \frac{1}{180.0} = -\frac{2.0950}{3427.95} \approx -6.1115 \times 10^{-4}\text{ K}^{-1}.

  6. Solve for 1T0\frac{1}{T_0}: 1T0=1180.0−6.1115×10−4=5.5556×10−3−6.1115×10−4=4.9444×10−3 K−1\frac{1}{T_0} = \frac{1}{180.0} - 6.1115 \times 10^{-4} = 5.5556 \times 10^{-3} - 6.1115 \times 10^{-4} = 4.9444 \times 10^{-3}\text{ K}^{-1}.

Final answer

T0=14.9444×10−3 K−1≈202 KT_0 = \frac{1}{4.9444 \times 10^{-3}\text{ K}^{-1}} \approx 202\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting kJ\text{kJ} to J\text{J} as the very first line of scratch work whenever R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} appears.

  • Perform a sanity check on calculated Kelvin values: absolute temperatures must always be positive and physically realistic for phase changes.

OverviewACEpath Teacher's Diagnosis

02 The student drops the negative sign in the Clausius-Clapeyron formula, resulting in an inverted temperature difference.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ln⁡(0.650/0.080)=(28500/8.314)∗(1/T0−1/180.0)\ln(0.650 / 0.080) = (28500 / 8.314) * (1/T_0 - 1/180.0)

    Correct

    ln⁡(0.6500.080)=−285008.314(1T0−1180.0)\ln\left(\frac{0.650}{0.080}\right) = -\frac{28500}{8.314}\left(\frac{1}{T_0} - \frac{1}{180.0}\right)

    You correctly converted ΔHvap\Delta H_{\text{vap}} from kJ/mol\text{kJ/mol} to J/mol\text{J/mol} and substituted the given values, but you omitted the leading negative sign from −ΔHvapR-\frac{\Delta H_{\text{vap}}}{R}.

  2. Step 2

    2.0949=3427.95∗(1/T0−0.005556)  ⟹  1/T0−0.005556=0.0006111  ⟹  1/T0=0.006167 K−12.0949 = 3427.95 * (1/T_0 - 0.005556) \implies 1/T_0 - 0.005556 = 0.0006111 \implies 1/T_0 = 0.006167\text{ K}^{-1}

    Correct

    2.0949=−3427.95(1T0−0.005556)  ⟹  1T0=0.005556−0.0006111=0.004945 K−12.0949 = -3427.95\left(\frac{1}{T_0} - 0.005556\right) \implies \frac{1}{T_0} = 0.005556 - 0.0006111 = 0.004945\text{ K}^{-1}

    Your algebraic isolation of 1T0\frac{1}{T_0} followed your written equation consistently, but because the negative sign was missing, you added 0.00061110.0006111 to 1Tt\frac{1}{T_t} instead of subtracting it.

  3. Step 3

    T0=162.2 KT_0 = 162.2\text{ K}

    Correct

    T0=10.004945 K−1≈202 KT_0 = \frac{1}{0.004945\text{ K}^{-1}} \approx 202\text{ K}

    You correctly took the reciprocal of your calculated value, but the upstream sign error resulted in 162.2 K162.2\text{ K} rather than the correct 202 K202\text{ K}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted ΔHvap=28.5 kJ/mol\Delta H_{\text{vap}} = 28.5\text{ kJ/mol} to 28,500 J/mol28{,}500\text{ J/mol} to match the units of the universal gas constant RR.

You evaluated the natural logarithm ratio ln⁡(0.650/0.080)\ln(0.650 / 0.080) accurately.

You performed each subsequent algebraic manipulation and reciprocal calculation without arithmetic mistakes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted negative sign in Clausius-Clapeyron equation

You dropped the minus sign in front of ΔHvapR\frac{\Delta H_{\text{vap}}}{R} when setting up the integrated Clausius-Clapeyron formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the form ln⁡(P2/P1)=−ΔHvapR(1T2−1T1)\ln(P_2/P_1) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) with ln⁡(P2/P1)=ΔHvapR(1T1−1T2)\ln(P_2/P_1) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right), causing the temperature difference to invert and producing an unphysical result where vapor pressure drops as temperature rises.

REASONING PATH
Your ACEpath teacher’s suggested approach
Temperature Order and Sign Convention
  • In ln⁡(P2P1)=−ΔHvapR(1T2−1T1)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right), the negative sign must be retained if T2T_2 is in the first reciprocal term.

  • Always verify whether you are writing −ΔHR(1T2−1T1)-\frac{\Delta H}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) or ΔHR(1T1−1T2)\frac{\Delta H}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right) before plugging in numerical values.

Physical Trend Sanity Check
  • Vapor pressure must increase monotonically with temperature (dPdT>0\frac{dP}{dT} > 0).

  • Compare your target pressure PP to the reference pressure PtP_t: since 0.650 atm>0.080 atm0.650\text{ atm} > 0.080\text{ atm}, your calculated T0T_0 must be strictly greater than Tt=180.0 KT_t = 180.0\text{ K}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the negative sign in the Clausius-Clapeyron equation: ln⁡(0.6500.080)=−285008.314(1T0−1180.0)\ln\left(\frac{0.650}{0.080}\right) = -\frac{28500}{8.314}\left(\frac{1}{T_0} - \frac{1}{180.0}\right).

  2. Compute the ratio and divide by −3427.95 K-3427.95\text{ K}: 1T0−1180.0=−2.09493427.95≈−0.0006111 K−1\frac{1}{T_0} - \frac{1}{180.0} = -\frac{2.0949}{3427.95} \approx -0.0006111\text{ K}^{-1}.

  3. Isolate 1T0\frac{1}{T_0}: 1T0=1180.0−0.0006111=0.0055556−0.0006111=0.0049445 K−1\frac{1}{T_0} = \frac{1}{180.0} - 0.0006111 = 0.0055556 - 0.0006111 = 0.0049445\text{ K}^{-1}.

  4. Take the reciprocal to solve for T0T_0: T0=10.0049445 K−1≈202.2 K≈202 KT_0 = \frac{1}{0.0049445\text{ K}^{-1}} \approx 202.2\text{ K} \approx 202\text{ K}.

Final answer

T0=202 KT_0 = 202\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the two equivalent forms of the Clausius-Clapeyron equation: ln⁡(P2P1)=−ΔHR(1T2−1T1)=ΔHR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) = \frac{\Delta H}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right).

  • Perform a qualitative sanity check at the end of every phase equilibrium problem: higher vapor pressure requires higher temperature.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the pressure ratio as Pt / P inside the natural logarithm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ln⁡(0.0800.650)=−(285008.314)⋅(1T0−1180.0)  ⟹  −2.0949=−3427.95⋅(1T0−0.005556)\ln\left(\frac{0.080}{0.650}\right) = -\left(\frac{28500}{8.314}\right) \cdot \left(\frac{1}{T_0} - \frac{1}{180.0}\right) \implies -2.0949 = -3427.95 \cdot \left(\frac{1}{T_0} - 0.005556\right)

    Correct

    ln⁡(0.6500.080)=−(285008.314)⋅(1T0−1180.0)  ⟹  2.0950=−3427.95⋅(1T0−0.005556)\ln\left(\frac{0.650}{0.080}\right) = -\left(\frac{28500}{8.314}\right) \cdot \left(\frac{1}{T_0} - \frac{1}{180.0}\right) \implies 2.0950 = -3427.95 \cdot \left(\frac{1}{T_0} - 0.005556\right)

    In the given coexistence formula ln⁡(PPt)=−ΔHvapR(1T0−1Tt)\ln\left(\frac{P}{P_t}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_0} - \frac{1}{T_t}\right), the numerator corresponds to the condensation pressure P=0.650 atmP = 0.650\text{ atm} and the denominator to the triple-point pressure Pt=0.080 atmP_t = 0.080\text{ atm}. You substituted PtP=0.0800.650\frac{P_t}{P} = \frac{0.080}{0.650}, which reversed the sign of the logarithmic term.

  2. Step 2

    1T0−0.005556=0.0006111  ⟹  1T0=0.006167 K−1\frac{1}{T_0} - 0.005556 = 0.0006111 \implies \frac{1}{T_0} = 0.006167\text{ K}^{-1}

    Correct

    1T0−0.005556=−0.0006112  ⟹  1T0=0.004945 K−1\frac{1}{T_0} - 0.005556 = -0.0006112 \implies \frac{1}{T_0} = 0.004945\text{ K}^{-1}

    Your algebraic manipulation was executed correctly, but it inherited the sign error from inverting the pressure ratio.

  3. Step 3

    T0=162.2 KT_0 = 162.2\text{ K}

    Correct

    T0=202 KT_0 = 202\text{ K}

    Taking the reciprocal of your derived value gave 162.2 K162.2\text{ K} instead of the expected 202 K202\text{ K} because of the earlier ratio swap.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the enthalpy of vaporization from kJ/mol\text{kJ/mol} to J/mol\text{J/mol} to match the units of the gas constant RR.

You accurately paired T0T_0 with PP and TtT_t with PtP_t in the structural layout of the equation.

You carried out each algebraic step cleanly and accurately inverted 1T0\frac{1}{T_0} at the end.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted pressure ratio in Clausius-Clapeyron equation

You swapped the numerator and denominator inside the natural logarithm, evaluating PtP\frac{P_t}{P} instead of PPt\frac{P}{P_t}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating initial and final state assignments in the integrated Clausius-Clapeyron equation led to a reversed pressure fraction, yielding a temperature lower than the triple point even though the observed pressure was higher.

REASONING PATH
Your ACEpath teacher’s suggested approach
State pairing check
  • In ln⁡(P2P1)=−ΔHR(1T2−1T1)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right), the numerator pressure P2P_2 must strictly correspond to the first reciprocal temperature term 1T2\frac{1}{T_2}.

  • Label state 1 as (Tt,Pt)(T_t, P_t) and state 2 as (T0,P)(T_0, P) explicitly before substituting values into the fraction.

Physical plausibility check
  • Along the liquid-vapor coexistence curve, vapor pressure increases monotonically with temperature (higher PP requires higher TT).

  • Compare PP with PtP_t: since 0.650 atm>0.080 atm0.650\text{ atm} > 0.080\text{ atm}, T0T_0 must be strictly greater than Tt=180.0 KT_t = 180.0\text{ K}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the ratio correctly: ln⁡(0.6500.080)=ln⁡(8.125)≈2.0950\ln\left(\frac{0.650}{0.080}\right) = \ln(8.125) \approx 2.0950.

  2. Divide by −ΔHvapR=−3427.95 K-\frac{\Delta H_{\text{vap}}}{R} = -3427.95\text{ K}: 1T0−1180.0 K=2.0950−3427.95≈−6.112×10−4 K−1\frac{1}{T_0} - \frac{1}{180.0\text{ K}} = \frac{2.0950}{-3427.95} \approx -6.112 \times 10^{-4}\text{ K}^{-1}.

  3. Isolate 1T0\frac{1}{T_0}: 1T0=5.556×10−3 K−1−6.112×10−4 K−1=4.945×10−3 K−1\frac{1}{T_0} = 5.556 \times 10^{-3}\text{ K}^{-1} - 6.112 \times 10^{-4}\text{ K}^{-1} = 4.945 \times 10^{-3}\text{ K}^{-1}.

  4. Invert to find T0T_0: T0=14.945×10−3 K−1≈202.2 KT_0 = \frac{1}{4.945 \times 10^{-3}\text{ K}^{-1}} \approx 202.2\text{ K}.

Final answer

T0=202 KT_0 = 202\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Label P1,T1P_1, T_1 and P2,T2P_2, T_2 before writing down the ratio inside the logarithm to prevent accidental inversion.

  • Perform a sanity check on phase diagrams: higher vapor pressure always corresponds to higher temperature for liquid-vapor equilibrium.

Lock it in

Similar question

01

Water has a normal boiling point of 373.15 K373.15\text{ K} at 1.00 atm1.00\text{ atm} and ΔHvap=40.7 kJ/mol\Delta H_{\text{vap}} = 40.7\text{ kJ/mol}. Using the Clausius-Clapeyron equation with R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, calculate the vapor pressure of water at 353.15 K353.15\text{ K} (80.0∘C80.0^\circ\text{C}).

Answer

P2≈0.47 atmP_2 \approx 0.47\text{ atm}. Key steps: Convert ΔHvap=40,700 J/mol\Delta H_{\text{vap}} = 40{,}700\text{ J/mol}. Compute ln⁡(P2/1.00)=−40,7008.314(1353.15−1373.15)=−4895.35×(1.5173×10−4)≈−0.7428\ln(P_2/1.00) = -\frac{40{,}700}{8.314}\left(\frac{1}{353.15} - \frac{1}{373.15}\right) = -4895.35 \times (1.5173 \times 10^{-4}) \approx -0.7428. Thus P2=e−0.7428≈0.476 atmP_2 = e^{-0.7428} \approx 0.476\text{ atm}.

02

A volatile liquid has a vapor pressure of 0.200 atm0.200\text{ atm} at 250.0 K250.0\text{ K} and 0.800 atm0.800\text{ atm} at 290.0 K290.0\text{ K}. Calculate the molar enthalpy of vaporization ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol}. (R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)})

Answer

ΔHvap≈20.9 kJ/mol\Delta H_{\text{vap}} \approx 20.9\text{ kJ/mol}. Key steps: ln⁡(0.8000.200)=ln⁡(4)≈1.3863\ln\left(\frac{0.800}{0.200}\right) = \ln(4) \approx 1.3863. Set up 1.3863=−ΔHvap8.314(1290.0−1250.0)=−ΔHvap8.314(−5.5172×10−4)1.3863 = -\frac{\Delta H_{\text{vap}}}{8.314}\left(\frac{1}{290.0} - \frac{1}{250.0}\right) = -\frac{\Delta H_{\text{vap}}}{8.314}(-5.5172 \times 10^{-4}). Solve: ΔHvap=1.3863×8.3145.5172×10−4≈20,893 J/mol≈20.9 kJ/mol\Delta H_{\text{vap}} = \frac{1.3863 \times 8.314}{5.5172 \times 10^{-4}} \approx 20{,}893\text{ J/mol} \approx 20.9\text{ kJ/mol}.

03

A compound has a triple point at Tt=210.0 KT_t = 210.0\text{ K} and Pt=0.050 atmP_t = 0.050\text{ atm}. Its molar enthalpy of vaporization is ΔHvap=31.0 kJ/mol\Delta H_{\text{vap}} = 31.0\text{ kJ/mol}. Determine the temperature TT at which the equilibrium vapor pressure reaches 1.20 atm1.20\text{ atm}. (R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)})

Answer

T≈256 KT \approx 256\text{ K}. Key steps: ln⁡(1.200.050)=ln⁡(24)≈3.1781\ln\left(\frac{1.20}{0.050}\right) = \ln(24) \approx 3.1781. Convert ΔHvap=31,000 J/mol\Delta H_{\text{vap}} = 31{,}000\text{ J/mol}. Rearrange: 1T=1Tt−Rln⁡(P/Pt)ΔHvap=1210.0−8.314×3.178131,000=4.7619×10−3−8.5235×10−4=3.9096×10−3 K−1\frac{1}{T} = \frac{1}{T_t} - \frac{R\ln(P/P_t)}{\Delta H_{\text{vap}}} = \frac{1}{210.0} - \frac{8.314 \times 3.1781}{31{,}000} = 4.7619 \times 10^{-3} - 8.5235 \times 10^{-4} = 3.9096 \times 10^{-3}\text{ K}^{-1}. Invert: T=13.9096×10−3≈255.8 K≈256 KT = \frac{1}{3.9096 \times 10^{-3}} \approx 255.8\text{ K} \approx 256\text{ K}.

Loading workspace…