Resources

When 1.00 mol1.00\text{ mol} of anhydrous hydrogen chloride gas dissolves in nn moles of liquid water according to HCl(g)+nH2O(l)→HCl(aq,nH2O)\text{HCl}(g) + n\text{H}_2\text{O}(l) \rightarrow \text{HCl}(aq, n\text{H}_2\text{O}), the integral enthalpy of solution at 298 K298\text{ K} varies with the molar ratio nn according to the empirical asymptotic expression: ΔHm(n)=−74.85+18.42n+0.850 kJ/mol\Delta H_m(n) = -74.85 + \frac{18.42}{n + 0.850}\text{ kJ/mol}. (a) Calculate the integral enthalpy of solution when 1.00 mol1.00\text{ mol} of HCl(g)\text{HCl}(g) is dissolved in a concentrated ratio of n=3.00 moles of H2On = 3.00\text{ moles of H}_2\text{O}. (b) Evaluate the asymptotic limit as n→∞n \rightarrow \infty (the enthalpy of solution at infinite dilution, ΔHsoln∞\Delta H_{\text{soln}}^\infty). (c) Calculate the intermediate enthalpy of dilution ΔHdil\Delta H_{\text{dil}} when the concentrated solution from part (a) is diluted with an infinite excess of solvent.

Answer and steps

Final answer

(a) ΔHm(3.00)=−70.07 kJ/mol\Delta H_m(3.00) = -70.07\text{ kJ/mol}; (b) ΔHsoln∞=−74.85 kJ/mol\Delta H_{\text{soln}}^\infty = -74.85\text{ kJ/mol}; (c) ΔHdil=−4.78 kJ/mol\Delta H_{\text{dil}} = -4.78\text{ kJ/mol}

Steps

Part (a): Integral Enthalpy of Solution for n=3.00 mol of HX2On = 3.00\text{ mol of }\ce{H2O}

The integral enthalpy of solution, ΔHm(n)\Delta H_m(n), corresponds to the enthalpy change when 1.00 mol1.00\text{ mol} of solute dissolves in nn moles of solvent:

HCl(g)+nHX2O(l)→HCl(aq,nHX2O)\ce{HCl}(g) + n\ce{H2O}(l) \rightarrow \ce{HCl}(aq, n\ce{H2O})

Substitute n=3.00n = 3.00 directly into the empirical function:

ΔHm(3.00)=−74.85+18.423.00+0.850 kJ/mol\Delta H_m(3.00) = -74.85 + \frac{18.42}{3.00 + 0.850}\text{ kJ/mol}

Calculate the denominator and the quotient:

3.00+0.850=3.8503.00 + 0.850 = 3.850

18.423.850≈4.7844 kJ/mol\frac{18.42}{3.850} \approx 4.7844\text{ kJ/mol}

Now evaluate the sum:

ΔHm(3.00)=−74.85+4.7844=−70.0656 kJ/mol≈−70.07 kJ/mol\Delta H_m(3.00) = -74.85 + 4.7844 = -70.0656\text{ kJ/mol} \approx -70.07\text{ kJ/mol}


Part (b): Enthalpy of Solution at Infinite Dilution (ΔHsoln∞\Delta H_{\text{soln}}^\infty)

At infinite dilution, the amount of solvent is arbitrarily large (n→∞n \rightarrow \infty). Take the mathematical limit of ΔHm(n)\Delta H_m(n) as n→∞n \rightarrow \infty:

ΔHsoln∞=lim⁡n→∞ΔHm(n)=lim⁡n→∞(−74.85+18.42n+0.850) kJ/mol\Delta H_{\text{soln}}^\infty = \lim_{n \rightarrow \infty} \Delta H_m(n) = \lim_{n \rightarrow \infty} \left( -74.85 + \frac{18.42}{n + 0.850} \right)\text{ kJ/mol}

Since the denominator grows without bound, the second term approaches zero:

lim⁡n→∞18.42n+0.850=0\lim_{n \rightarrow \infty} \frac{18.42}{n + 0.850} = 0

Therefore:

ΔHsoln∞=−74.85 kJ/mol\Delta H_{\text{soln}}^\infty = -74.85\text{ kJ/mol}


Part (c): Enthalpy of Dilution (ΔHdil\Delta H_{\text{dil}})

The process of diluting a solution from an initial solvent-to-solute ratio n1n_1 to a final ratio n2n_2 involves adding solvent:

HCl(aq,n1HX2O)+(n2−n1)HX2O(l)→HCl(aq,n2HX2O)\ce{HCl}(aq, n_1\ce{H2O}) + (n_2 - n_1)\ce{H2O}(l) \rightarrow \ce{HCl}(aq, n_2\ce{H2O})

By Hess's Law, the enthalpy of dilution is the difference between the integral enthalpy of solution at the final state and that at the initial state:

ΔHdil=ΔHm(n2)−ΔHm(n1)\Delta H_{\text{dil}} = \Delta H_m(n_2) - \Delta H_m(n_1)

For dilution from n1=3.00n_1 = 3.00 to infinite dilution (n2→∞n_2 \rightarrow \infty):

ΔHdil=ΔHsoln∞−ΔHm(3.00)\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(3.00)

Substitute the calculated values:

ΔHdil=−74.85 kJ/mol−(−70.07 kJ/mol)=−4.78 kJ/mol\Delta H_{\text{dil}} = -74.85\text{ kJ/mol} - (-70.07\text{ kJ/mol}) = -4.78\text{ kJ/mol}

Common Pitfall: Enthalpy of dilution is defined as ΔHfinal−ΔHinitial\Delta H_{\text{final}} - \Delta H_{\text{initial}}, not the reverse. Because the dissolution of HCl\ce{HCl} is more exothermic as more water is added, further dilution releases additional heat, leading to a negative value for ΔHdil\Delta H_{\text{dil}}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the initial and final states when calculating the enthalpy of dilution, resulting in an incorrect positive sign for an exothermic dilution process.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHm(3.00)=−74.85+18.42(3.00+0.850)  ⟹  ΔHm(3.00)=−74.85+4.784=−70.07 kJ/mol\Delta H_m(3.00) = -74.85 + \frac{18.42}{(3.00 + 0.850)} \implies \Delta H_m(3.00) = -74.85 + 4.784 = -70.07\text{ kJ/mol}

  2. Step 2

    lim⁡n→∞18.42(n+0.850)=0  ⟹  ΔHsoln∞=−74.85 kJ/mol\lim_{n \rightarrow \infty} \frac{18.42}{(n + 0.850)} = 0 \implies \Delta H_{\text{soln}}^\infty = -74.85\text{ kJ/mol}

  3. Step 3

    ΔHdil=ΔHm(3.00)−ΔHsoln∞  ⟹  ΔHdil=−70.07−(−74.85)=+4.78 kJ/mol\Delta H_{\text{dil}} = \Delta H_m(3.00) - \Delta H_{\text{soln}}^\infty \implies \Delta H_{\text{dil}} = -70.07 - (-74.85) = +4.78\text{ kJ/mol}

    Correct

    ΔHdil=ΔHsoln∞−ΔHm(3.00)=−74.85−(−70.07)=−4.78 kJ/mol\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(3.00) = -74.85 - (-70.07) = -4.78\text{ kJ/mol}

    You subtracted the final state from the initial state instead of using ΔHdil=ΔHfinal−ΔHinitial\Delta H_{\text{dil}} = \Delta H_{\text{final}} - \Delta H_{\text{initial}}. Because adding solvent to concentrated HCl\text{HCl} releases additional heat, the dilution process must be exothermic with a negative enthalpy change.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the integral enthalpy of solution at a specific solvent ratio.

You correctly determined the asymptotic limit at infinite dilution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed State Difference

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined the enthalpy of dilution as initial state minus final state instead of following the thermodynamic state-function convention ΔH=Hfinal−Hinitial\Delta H = H_{\text{final}} - H_{\text{initial}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Enthalpy of Dilution Convention
  • For diluting a solution from solvent ratio n1n_1 to n2n_2 (n2>n1n_2 > n_1), ΔHdil=ΔHm(n2)−ΔHm(n1)\Delta H_{\text{dil}} = \Delta H_m(n_2) - \Delta H_m(n_1).

  • Always verify that the final state (higher dilution) is written first and the initial state (more concentrated) is subtracted from it.

Physical Sign Check
  • If dissolving a solute becomes increasingly exothermic as more water is added, further dilution must release heat (ΔHdil<0\Delta H_{\text{dil}} < 0).

  • Compare the magnitude of exothermicity before and after dilution to ensure your calculated sign matches the expected release or absorption of heat.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the definition of enthalpy of dilution using final minus initial state: ΔHdil=ΔHsoln∞−ΔHm(3.00)\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(3.00).

  2. Substitute the values found in parts (a) and (b): ΔHdil=−74.85 kJ/mol−(−70.07 kJ/mol)\Delta H_{\text{dil}} = -74.85\text{ kJ/mol} - (-70.07\text{ kJ/mol}).

  3. Perform the subtraction: ΔHdil=−4.78 kJ/mol\Delta H_{\text{dil}} = -4.78\text{ kJ/mol}.

Final answer

(a) ΔHm(3.00)=−70.07 kJ/mol\Delta H_m(3.00) = -70.07\text{ kJ/mol}; (b) ΔHsoln∞=−74.85 kJ/mol\Delta H_{\text{soln}}^\infty = -74.85\text{ kJ/mol}; (c) ΔHdil=−4.78 kJ/mol\Delta H_{\text{dil}} = -4.78\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Hess's Law cycles for dilution processes to reinforce why dilution is defined as ΔHfinal−ΔHinitial\Delta H_{\text{final}} - \Delta H_{\text{initial}}.

  • Practice solving intermediate dilution problems between two finite solvent ratios n1n_1 and n2n_2.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to add the constant term in the denominator before dividing, computing 18.42 / 3.00 + 0.850 instead of 18.42 / (3.00 + 0.850).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHm(3.00)=−74.85+18.423.00+0.850⟹ΔHm(3.00)=−74.85+6.14+0.850=−67.86 kJ/mol\Delta H_m(3.00) = -74.85 + \frac{18.42}{3.00} + 0.850 \Longrightarrow \Delta H_m(3.00) = -74.85 + 6.14 + 0.850 = -67.86\text{ kJ/mol}

    Correct

    ΔHm(3.00)=−74.85+18.423.00+0.850=−74.85+18.423.850≈−70.07 kJ/mol\Delta H_m(3.00) = -74.85 + \frac{18.42}{3.00 + 0.850} = -74.85 + \frac{18.42}{3.850} \approx -70.07\text{ kJ/mol}

    You placed only 3.003.00 in the denominator and added 0.8500.850 as an outside term, rather than grouping (n+0.850)(n + 0.850) completely in the denominator before dividing.

  2. Step 2

    lim⁡n→∞18.42n+0.850=0⟹ΔHsoln∞=−74.85 kJ/mol\lim_{n \rightarrow \infty} \frac{18.42}{n + 0.850} = 0 \Longrightarrow \Delta H_{\text{soln}}^\infty = -74.85\text{ kJ/mol}

  3. Step 3

    ΔHdil=ΔHsoln∞−ΔHm(3.00)⟹ΔHdil=−74.85−(−67.86)=−6.99 kJ/mol\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(3.00) \Longrightarrow \Delta H_{\text{dil}} = -74.85 - (-67.86) = -6.99\text{ kJ/mol}

    Correct

    ΔHdil=ΔHsoln∞−ΔHm(3.00)=−74.85−(−70.07)=−4.78 kJ/mol\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(3.00) = -74.85 - (-70.07) = -4.78\text{ kJ/mol}

    You set up the dilution enthalpy formula and sign convention correctly using Hess's law, but substituting your part (a) value propagated the earlier arithmetic error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the mathematical limit as n→∞n \rightarrow \infty to determine the enthalpy of solution at infinite dilution.

You stated the correct thermodynamic relationship for enthalpy of dilution as ΔHdil=ΔHfinal−ΔHinitial\Delta H_{\text{dil}} = \Delta H_{\text{final}} - \Delta H_{\text{initial}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Order of Operations in Rational Denominator

You divided 18.4218.42 by 3.003.00 before adding 0.8500.850, treating 18.42n+0.850\frac{18.42}{n + 0.850} as 18.42n+0.850\frac{18.42}{n} + 0.850.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the implicit grouping grouping parentheses around the polynomial denominator of the rational function during substitution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate grouped denominators first
  • A fraction bar acts as a grouping symbol: AB+C=A÷(B+C)≠AB+C\frac{A}{B + C} = A \div (B + C) \neq \frac{A}{B} + C.

  • Whenever evaluating a rational expression, write explicit parentheses around the entire denominator before computing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the entire denominator first: n+0.850=3.00+0.850=3.850n + 0.850 = 3.00 + 0.850 = 3.850.

  2. Compute the quotient: 18.423.850≈4.7844 kJ/mol\frac{18.42}{3.850} \approx 4.7844\text{ kJ/mol}.

  3. Add the constant term: ΔHm(3.00)=−74.85+4.7844=−70.07 kJ/mol\Delta H_m(3.00) = -74.85 + 4.7844 = -70.07\text{ kJ/mol}.

  4. Recalculate the dilution enthalpy: ΔHdil=−74.85−(−70.07)=−4.78 kJ/mol\Delta H_{\text{dil}} = -74.85 - (-70.07) = -4.78\text{ kJ/mol}.

Final answer

(a) ΔHm(3.00)=−70.07 kJ/mol\Delta H_m(3.00) = -70.07\text{ kJ/mol}; (b) ΔHsoln∞=−74.85 kJ/mol\Delta H_{\text{soln}}^\infty = -74.85\text{ kJ/mol}; (c) ΔHdil=−4.78 kJ/mol\Delta H_{\text{dil}} = -4.78\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Enclose multi-term denominators in explicit parentheses on your paper immediately upon substitution.

  • Re-evaluate intermediate values before carrying them into subsequent thermodynamic cycles.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly adds the two integral enthalpies of solution instead of taking their difference to find the enthalpy of dilution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHm(3.00)=−74.85+18.423.850  ⟹  ΔHm(3.00)=−70.07 kJ/mol\Delta H_m(3.00) = -74.85 + \frac{18.42}{3.850} \implies \Delta H_m(3.00) = -70.07\text{ kJ/mol}

  2. Step 2

    As n→∞, 18.42n+0.850→0  ⟹  ΔHsoln∞=−74.85 kJ/mol\text{As } n \rightarrow \infty,\ \frac{18.42}{n + 0.850} \rightarrow 0 \implies \Delta H_{\text{soln}}^\infty = -74.85\text{ kJ/mol}

  3. Step 3

    ΔHdil=ΔHsoln∞+ΔHm(3.00)  ⟹  ΔHdil=−74.85+(−70.07)=−144.92 kJ/mol\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty + \Delta H_m(3.00) \implies \Delta H_{\text{dil}} = -74.85 + (-70.07) = -144.92\text{ kJ/mol}

    Correct

    ΔHdil=ΔHsoln∞−ΔHm(3.00)=−74.85−(−70.07)=−4.78 kJ/mol\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(3.00) = -74.85 - (-70.07) = -4.78\text{ kJ/mol}

    Dilution is a state change from an initial concentration to a final concentration. By Hess's Law, the enthalpy of dilution equals ΔHm(final)−ΔHm(initial)\Delta H_m(\text{final}) - \Delta H_m(\text{initial}), not their sum.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted n=3.00n = 3.00 into the expression to find ΔHm(3.00)\Delta H_m(3.00).

You evaluated the asymptotic limit as n→∞n \rightarrow \infty to determine ΔHsoln∞\Delta H_{\text{soln}}^\infty.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign or Operation Error in Enthalpy of Dilution

You wrote a plus sign instead of a minus sign between the final and initial integral enthalpies.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated dilution as the combination of two independent dissolution steps rather than the difference between two states of solution along a thermodynamic path.

REASONING PATH
Your ACEpath teacher’s suggested approach
Hess's Law for Dilution
  • ΔHdil=ΔHm(n2)−ΔHm(n1)\Delta H_{\text{dil}} = \Delta H_m(n_2) - \Delta H_m(n_1) for dilution from n1n_1 to n2n_2 moles of solvent.

  • Always set up dilution as State 2−State 1\text{State 2} - \text{State 1} because it represents the transition between two solution states, subtracting the initial dissolution reaction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the thermodynamic cycle using Hess's Law: HCl(aq,3.00H2O)+excess H2O(l)→HCl(aq,∞H2O)\text{HCl}(aq, 3.00\text{H}_2\text{O}) + \text{excess } \text{H}_2\text{O}(l) \rightarrow \text{HCl}(aq, \infty\text{H}_2\text{O}).

  2. Express the enthalpy of dilution as the difference between the final and initial integral enthalpies: ΔHdil=ΔHsoln∞−ΔHm(3.00)\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(3.00).

  3. Substitute the values from parts (a) and (b): ΔHdil=−74.85 kJ/mol−(−70.07 kJ/mol)=−4.78 kJ/mol\Delta H_{\text{dil}} = -74.85\text{ kJ/mol} - (-70.07\text{ kJ/mol}) = -4.78\text{ kJ/mol}.

Final answer

(a) ΔHm(3.00)=−70.07 kJ/mol\Delta H_m(3.00) = -70.07\text{ kJ/mol}; (b) ΔHsoln∞=−74.85 kJ/mol\Delta H_{\text{soln}}^\infty = -74.85\text{ kJ/mol}; (c) ΔHdil=−4.78 kJ/mol\Delta H_{\text{dil}} = -4.78\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how integral enthalpy of solution connects to the enthalpy of dilution via Hess's Law.

  • Practice drawing an enthalpy level diagram when moving from a concentrated solution to infinite dilution to verify the expected sign and magnitude.

Lock it in

Similar question

01

The integral enthalpy of solution for a solute is given by ΔHm(n)=−40.0+10.0n+1.0 kJ/mol\Delta H_m(n) = -40.0 + \frac{10.0}{n + 1.0}\text{ kJ/mol}. Calculate the enthalpy of dilution ΔHdil\Delta H_{\text{dil}} when 1.00 mol1.00\text{ mol} of solute in n=4.0 moln = 4.0\text{ mol} of water is diluted to infinite dilution (n→∞n \rightarrow \infty).

Answer

ΔHm(4.0)=−40.0+10.05.0=−38.0 kJ/mol\Delta H_m(4.0) = -40.0 + \frac{10.0}{5.0} = -38.0\text{ kJ/mol}. At infinite dilution, ΔHsoln∞=−40.0 kJ/mol\Delta H_{\text{soln}}^\infty = -40.0\text{ kJ/mol}. Therefore, ΔHdil=ΔHsoln∞−ΔHm(4.0)=−40.0−(−38.0)=−2.0 kJ/mol\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(4.0) = -40.0 - (-38.0) = -2.0\text{ kJ/mol}.

02

A concentrated aqueous acid solution has an integral enthalpy of solution of ΔHm(n1)=−62.4 kJ/mol\Delta H_m(n_1) = -62.4\text{ kJ/mol} at n1=5.0n_1 = 5.0. Adding water to reach n2=20.0n_2 = 20.0 changes the integral enthalpy of solution to ΔHm(n2)=−71.1 kJ/mol\Delta H_m(n_2) = -71.1\text{ kJ/mol}. Determine the intermediate enthalpy of dilution ΔHdil\Delta H_{\text{dil}} between these two concentrations.

Answer

ΔHdil=ΔHm(n2)−ΔHm(n1)=−71.1 kJ/mol−(−62.4 kJ/mol)=−8.7 kJ/mol\Delta H_{\text{dil}} = \Delta H_m(n_2) - \Delta H_m(n_1) = -71.1\text{ kJ/mol} - (-62.4\text{ kJ/mol}) = -8.7\text{ kJ/mol}.

03

For a certain salt, dissolving 1.00 mol1.00\text{ mol} in 10.0 mol of H2O10.0\text{ mol of H}_2\text{O} has ΔHm=+12.5 kJ/mol\Delta H_m = +12.5\text{ kJ/mol} (endothermic). At infinite dilution, ΔHsoln∞=+8.0 kJ/mol\Delta H_{\text{soln}}^\infty = +8.0\text{ kJ/mol}. (a) Calculate ΔHdil\Delta H_{\text{dil}} when diluting from n=10.0n = 10.0 to infinite dilution. (b) State whether heat is absorbed or released during this dilution step.

Answer

(a) ΔHdil=ΔHsoln∞−ΔHm(10.0)=+8.0−(+12.5)=−4.5 kJ/mol\Delta H_{\text{dil}} = \Delta H_{\text{soln}}^\infty - \Delta H_m(10.0) = +8.0 - (+12.5) = -4.5\text{ kJ/mol}. (b) Because ΔHdil<0\Delta H_{\text{dil}} < 0, heat is released (the dilution step is exothermic), even though the overall dissolution process from solid to solution is endothermic.

Loading workspace…