Resources

An aqueous stock solution of sodium hydroxide (NaOH\text{NaOH}, molar mass =40.00 g/mol= 40.00\text{ g/mol}) is progressively diluted. In the extreme asymptotic limit of infinite dilution where the mass percent of NaOH\text{NaOH} approaches 0%0\%, the solution density approaches that of pure water (1.000 g/mL1.000\text{ g/mL}). If a highly dilute sample has a mass percent of 0.0400%0.0400\%, calculate its molarity under this limiting density condition and determine the concentration in parts per million (ppm\text{ppm}).

Answer and steps

Final answer

Molarity =0.0100 M= 0.0100\text{ M}, Concentration =400 ppm= 400\text{ ppm}

Steps

01

Calculate the mass of the solution and the mass of solute

To determine the molarity and parts per million (ppm\text{ppm}) of the dilute NaOH\ce{NaOH} solution, choose a convenient basis for calculation, such as 1.000 L1.000\text{ L} of solution.

Using the limiting density of pure water: Density of solution (ρ)=1.000 g/mL=1000 g/L\text{Density of solution } (\rho) = 1.000\text{ g/mL} = 1000\text{ g/L}

For 1.000 L1.000\text{ L} of solution: Mass of solution=1.000 L×1000 g/L=1000 g\text{Mass of solution} = 1.000\text{ L} \times 1000\text{ g/L} = 1000\text{ g}

A mass percent of 0.0400%0.0400\% means: Mass of NaOH=1000 g×0.0400100=0.400 g\text{Mass of }\ce{NaOH} = 1000\text{ g} \times \frac{0.0400}{100} = 0.400\text{ g}

02

Calculate the molarity

Convert the mass of NaOH\ce{NaOH} to moles using its molar mass (40.00 g/mol40.00\text{ g/mol}): Moles of NaOH=0.400 g40.00 g/mol=0.0100 mol\text{Moles of }\ce{NaOH} = \frac{0.400\text{ g}}{40.00\text{ g/mol}} = 0.0100\text{ mol}

Now, find the molarity (MM), defined as moles of solute per liter of solution: Molarity=0.0100 mol1.000 L=0.0100 M\text{Molarity} = \frac{0.0100\text{ mol}}{1.000\text{ L}} = 0.0100\text{ M}

03

Calculate the concentration in parts per million (ppm\text{ppm})

Parts per million represents parts of solute per 10610^6 parts of solution by mass: Concentration (ppm)=Mass of soluteMass of solution×106\text{Concentration (ppm)} = \frac{\text{Mass of solute}}{\text{Mass of solution}} \times 10^6

Substitute the values: Concentration (ppm)=0.400 g1000 g×106=400 ppm\text{Concentration (ppm)} = \frac{0.400\text{ g}}{1000\text{ g}} \times 10^6 = 400\text{ ppm}

(Alternative check: Since mass percent is parts per hundred (%=parts per 102\% = \text{parts per } 10^2), multiplying mass percent by 10410^4 gives ppm\text{ppm}: 0.0400×104=400 ppm0.0400 \times 10^4 = 400\text{ ppm}.)

Common Pitfall

A common mistake is confusing mass percent (g solute/100 g solution\text{g solute} / 100\text{ g solution}) with mass-volume concentration (g solute/100 mL solution\text{g solute} / 100\text{ mL solution}). For non-dilute solutions with densities significantly different from 1.00 g/mL1.00\text{ g/mL}, the volume of 100 g100\text{ g} of solution does not equal 100 mL100\text{ mL}. Here, using the limiting density ρ=1.000 g/mL\rho = 1.000\text{ g/mL} allows an exact conversion between solution volume and solution mass.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses mass percent with mass fraction by not dividing 0.0400 by 100, which overestimates both the molarity and ppm by a factor of 100.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    For 1000 g solution, mass of NaOH=40.0 g\text{For } 1000\text{ g solution, mass of } \ce{NaOH} = 40.0\text{ g}

    Correct

    Mass of NaOH=1000 g×0.0400100=0.400 g\text{Mass of } \ce{NaOH} = 1000\text{ g} \times \frac{0.0400}{100} = 0.400\text{ g}

    You multiplied 1000 g1000\text{ g} directly by 0.04000.0400 instead of dividing by 100100 to account for the percent sign. A mass percent of 0.0400%0.0400\% corresponds to a mass fraction of 0.0004000.000400, which yields 0.400 g0.400\text{ g} of NaOH\ce{NaOH}.

  2. Step 2

    Moles of NaOH=40.0 g/40.00 g/mol=1.00 mol\text{Moles of } \ce{NaOH} = 40.0\text{ g} / 40.00\text{ g/mol} = 1.00\text{ mol}

    Correct

    Moles of NaOH=0.400 g40.00 g/mol=0.0100 mol\text{Moles of } \ce{NaOH} = \frac{0.400\text{ g}}{40.00\text{ g/mol}} = 0.0100\text{ mol}

    You correctly applied the molar mass formula n=mMn = \frac{m}{M}, but the result was scaled by a factor of 100100 due to the earlier solute mass error.

  3. Step 3

    Volume of solution=1000 g/1.000 g/mL=1.000 L\text{Volume of solution} = 1000\text{ g} / 1.000\text{ g/mL} = 1.000\text{ L}

  4. Step 4

    Molarity=1.00 mol/1.000 L=1.00 M\text{Molarity} = 1.00\text{ mol} / 1.000\text{ L} = 1.00\text{ M}

    Correct

    Molarity=0.0100 mol1.000 L=0.0100 M\text{Molarity} = \frac{0.0100\text{ mol}}{1.000\text{ L}} = 0.0100\text{ M}

    You correctly defined molarity as moles of solute divided by liters of solution, but using 1.00 mol1.00\text{ mol} instead of 0.0100 mol0.0100\text{ mol} led to an incorrect molarity.

  5. Step 5

    ppm=(40.0 g/1000 g)×106=40000 ppm\text{ppm} = (40.0\text{ g} / 1000\text{ g}) \times 10^6 = 40000\text{ ppm}

    Correct

    ppm=0.400 g1000 g×106=400 ppm\text{ppm} = \frac{0.400\text{ g}}{1000\text{ g}} \times 10^6 = 400\text{ ppm}

    You correctly set up the parts per million formula, but substituting 40.0 g40.0\text{ g} instead of 0.400 g0.400\text{ g} resulted in 40000 ppm40000\text{ ppm} instead of 400 ppm400\text{ ppm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the limiting density of 1.000 g/mL1.000\text{ g/mL} to convert the solution mass into volume in liters.

You correctly applied the molar mass of NaOH\ce{NaOH} (40.00 g/mol40.00\text{ g/mol}) to convert solute grams to moles.

You correctly set up the defining ratio for molarity as moles per liter of solution.

You correctly formulated parts per million as the mass ratio multiplied by 10610^6.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percent-to-fraction conversion omission

You multiplied the solution mass by 0.04000.0400 directly without dividing by 100100, producing 40.0 g40.0\text{ g} of solute instead of 0.400 g0.400\text{ g}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the mathematical meaning of the percent sign (%=1/100\% = 1/100), treating a percentage value directly as a decimal mass fraction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting Mass Percent to Solute Mass
  • A mass percentage P%P\% means PP grams of solute per 100100 grams of solution (msolute=msolution×P100m_{\text{solute}} = m_{\text{solution}} \times \frac{P}{100}).

  • Whenever a concentration is given with a %\% sign, write out the division by 100100 explicitly before multiplying by total mass.

Direct Conversion Between Percent and ppm
  • Because percent is parts per hundred (10210^2) and ppm is parts per million (10610^6), 1%=104 ppm1\% = 10^4\text{ ppm}.

  • Quickly verify your ppm result by multiplying the mass percent by 10410^4: 0.0400%×104=400 ppm0.0400\% \times 10^4 = 400\text{ ppm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct solute mass using the mass percent definition: mNaOH=1000 g×0.0400100=0.400 gm_{\ce{NaOH}} = 1000\text{ g} \times \frac{0.0400}{100} = 0.400\text{ g}.

  2. Convert solute mass to moles: nNaOH=0.400 g40.00 g/mol=0.0100 moln_{\ce{NaOH}} = \frac{0.400\text{ g}}{40.00\text{ g/mol}} = 0.0100\text{ mol}.

  3. Divide moles of solute by solution volume: Molarity=0.0100 mol1.000 L=0.0100 M\text{Molarity} = \frac{0.0100\text{ mol}}{1.000\text{ L}} = 0.0100\text{ M}.

  4. Calculate ppm using the mass ratio: ppm=0.400 g1000 g×106=400 ppm\text{ppm} = \frac{0.400\text{ g}}{1000\text{ g}} \times 10^6 = 400\text{ ppm}.

Final answer

Molarity=0.0100 M, Concentration=400 ppm\text{Molarity} = 0.0100\text{ M},\text{ Concentration} = 400\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out %100\frac{\%}{100} explicitly when converting percentage to a fractional multiplier.

  • Use the quick identity 1%=104 ppm1\% = 10^4\text{ ppm} as a sanity check on ppm calculations.

  • Practice distinguishing mass percent (% w/w\%\text{ w/w}) from mass fraction and decimal multipliers.

OverviewACEpath Teacher's Diagnosis

02 The student uses a parts-per-thousand or parts-per-billion multiplier rather than 10⁶ when converting to parts per million.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    In 1000 g solution, mass of NaOH=1000 g×0.000400=0.400 g\text{In } 1000\text{ g solution, mass of NaOH} = 1000\text{ g} \times 0.000400 = 0.400\text{ g}

  2. Step 2

    Moles of NaOH=0.400 g40.00 g/mol=0.0100 mol  ⟹  Volume=1000 g1.000 g/mL=1.000 L\text{Moles of NaOH} = \frac{0.400\text{ g}}{40.00\text{ g/mol}} = 0.0100\text{ mol} \implies \text{Volume} = \frac{1000\text{ g}}{1.000\text{ g/mL}} = 1.000\text{ L}

  3. Step 3

    Molarity=0.0100 mol1.000 L=0.0100 M\text{Molarity} = \frac{0.0100\text{ mol}}{1.000\text{ L}} = 0.0100\text{ M}

  4. Step 4

    ppm=(0.400 g1000 g)×103=0.400 ppm\text{ppm} = \left(\frac{0.400\text{ g}}{1000\text{ g}}\right) \times 10^3 = 0.400\text{ ppm}

    Correct

    ppm=(0.400 g1000 g)×106=400 ppm\text{ppm} = \left(\frac{0.400\text{ g}}{1000\text{ g}}\right) \times 10^6 = 400\text{ ppm}

    Parts per million represents parts of solute per 10610^6 parts of solution. You multiplied the mass ratio by 10310^3 (parts per thousand) instead of 10610^6, giving a value that is 10001000 times too small.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected a convenient 1000 g1000\text{ g} reference basis to simplify the calculations.

You correctly used the molar mass of NaOH\ce{NaOH} to find the moles of solute.

You used the limiting density condition properly to determine the solution volume in liters.

You computed the molarity accurately as 0.0100 M0.0100\text{ M}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect scaling multiplier for parts per million (ppm)

You used the multiplier 10310^3 instead of 10610^6 in the definition of parts per million.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused parts per thousand (ppt\text{ppt}, multiplier 10310^3) with parts per million (ppm\text{ppm}, multiplier 10610^6), leading to an incorrect scaling of the dimensionless mass ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scaling Multipliers for Concentration Ratios
  • Percent (%)=ratio×102(\%) = \text{ratio} \times 10^2, parts per thousand (ppt)=ratio×103(\text{ppt}) = \text{ratio} \times 10^3, parts per million (ppm)=ratio×106(\text{ppm}) = \text{ratio} \times 10^6, and parts per billion (ppb)=ratio×109(\text{ppb}) = \text{ratio} \times 10^9.

  • Always verify the multiplier from the name: 'million' requires 10610^6.

Converting Mass Percent Directly to ppm
  • Because percent is per hundred (10210^2) and ppm\text{ppm} is per million (10610^6), multiplying mass percent by 10410^4 directly yields ppm\text{ppm}: ppm=(mass %)×104\text{ppm} = (\text{mass }\%) \times 10^4.

  • Use this relation as a quick sanity check: 0.0400%×104=400 ppm0.0400\% \times 10^4 = 400\text{ ppm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the definition of parts per million: ppm=mass of solutemass of solution×106\text{ppm} = \frac{\text{mass of solute}}{\text{mass of solution}} \times 10^6.

  2. Substitute the known masses: ppm=0.400 g1000 g×106\text{ppm} = \frac{0.400\text{ g}}{1000\text{ g}} \times 10^6.

  3. Simplify the fraction and multiply: 0.000400×106=400 ppm0.000400 \times 10^6 = 400\text{ ppm}.

Final answer

Molarity=0.0100 M\text{Molarity} = 0.0100\text{ M}, Concentration=400 ppm\text{Concentration} = 400\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the standard metric multipliers: percent is ×102\times 10^2, parts per thousand is ×103\times 10^3, ppm is ×106\times 10^6, and ppb is ×109\times 10^9.

  • Practice converting directly between mass percent and ppm using the shortcut factor of 10410^4.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the molar mass by the mass rather than dividing by molar mass when finding moles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    In 1000 g solution, mass of NaOH=1000 g×0.0400100=0.400 g\text{In } 1000\text{ g solution, mass of NaOH} = 1000\text{ g} \times \frac{0.0400}{100} = 0.400\text{ g}

  2. Step 2

    Moles of NaOH=0.400 g×40.00 g/mol=16.0 mol\text{Moles of NaOH} = 0.400\text{ g} \times 40.00\text{ g/mol} = 16.0\text{ mol}

    Correct

    Moles of NaOH=0.400 g40.00 g/mol=0.0100 mol\text{Moles of NaOH} = \frac{0.400\text{ g}}{40.00\text{ g/mol}} = 0.0100\text{ mol}

    To convert mass (g\text{g}) to amount in moles (mol\text{mol}), you must divide by molar mass (g/mol\text{g/mol}), not multiply. Multiplying gives units of g2/mol\text{g}^2/\text{mol}.

  3. Step 3

    Volume=1000 g1.000 g/mL=1.000 L  ⟹  Molarity=16.0 mol1.000 L=16.0 M\text{Volume} = \frac{1000\text{ g}}{1.000\text{ g/mL}} = 1.000\text{ L} \implies \text{Molarity} = \frac{16.0\text{ mol}}{1.000\text{ L}} = 16.0\text{ M}

    Correct

    Volume=1.000 L  ⟹  Molarity=0.0100 mol1.000 L=0.0100 M\text{Volume} = 1.000\text{ L} \implies \text{Molarity} = \frac{0.0100\text{ mol}}{1.000\text{ L}} = 0.0100\text{ M}

    Your conversion of mass to volume using density was correct, and your molarity formula setup was right, but the numerical result was affected by the incorrect mole value from Step 2.

  4. Step 4

    ppm=(0.400 g1000 g)×106=400 ppm\text{ppm} = \left(\frac{0.400\text{ g}}{1000\text{ g}}\right) \times 10^6 = 400\text{ ppm}

WHAT YOU DID WELL
Compliments from Your Teacher

You selected a convenient calculation basis (1000 g1000\text{ g}) that simplified the unit conversions.

You correctly used the solution density to find the volume of the solution.

You calculated the parts per million (ppm\text{ppm}) accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Multiplied instead of dividing by molar mass

You accidentally multiplied the solute mass by molar mass rather than dividing by molar mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the dimensional conversion factor between mass and moles, resulting in inconsistent units (g×g/mol=g2/mol\text{g} \times \text{g/mol} = \text{g}^2/\text{mol} instead of mol\text{mol}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Cancellation Check
  • n=mMn = \frac{m}{M}, so g÷(g/mol)=mol\text{g} \div (\text{g/mol}) = \text{mol}.

  • Always write out units explicitly when converting between grams and moles to ensure the grams cancel out.

Physical Reasonableness
  • A highly dilute solution (0.0400%0.0400\%) cannot have a concentrated molarity such as 16.0 M16.0\text{ M}.

  • Compare the magnitude of your molarity answer against the given mass percent to catch order-of-magnitude slips.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide mass by molar mass: n=0.400 g40.00 g/mol=0.0100 moln = \frac{0.400\text{ g}}{40.00\text{ g/mol}} = 0.0100\text{ mol}.

  2. Divide moles by volume: Molarity=0.0100 mol1.000 L=0.0100 M\text{Molarity} = \frac{0.0100\text{ mol}}{1.000\text{ L}} = 0.0100\text{ M}.

Final answer

Molarity=0.0100 M,  Concentration=400 ppm\text{Molarity} = 0.0100\text{ M},\; \text{Concentration} = 400\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice tracking units through dimensional analysis whenever converting grams to moles.

  • Perform a quick sanity check comparing dilute mass percentages to expected molarity ranges.

Lock it in

Similar question

01

An aqueous solution of sodium chloride (NaCl\ce{NaCl}, molar mass =58.44 g/mol= 58.44\text{ g/mol}) has a mass percent of 0.0584%0.0584\%. Assuming a limiting solution density of 1.000 g/mL1.000\text{ g/mL}, calculate its molarity and concentration in ppm\text{ppm}.

Answer

Molarity=0.0100 M, Concentration=584 ppm\text{Molarity} = 0.0100\text{ M},\text{ Concentration} = 584\text{ ppm}. For a 1000 g1000\text{ g} (1.000 L1.000\text{ L}) solution, solute mass is 1000 g×0.0584100=0.584 g1000\text{ g} \times \frac{0.0584}{100} = 0.584\text{ g}. Moles of NaCl=0.584 g58.44 g/mol=0.0100 mol\ce{NaCl} = \frac{0.584\text{ g}}{58.44\text{ g/mol}} = 0.0100\text{ mol}, yielding M=0.0100 MM = 0.0100\text{ M}. Concentration in ppm=0.0584×104=584 ppm\text{ppm} = 0.0584 \times 10^4 = 584\text{ ppm}.

02

A dilute glucose (CX6HX12OX6\ce{C6H12O6}, molar mass =180.16 g/mol= 180.16\text{ g/mol}) solution has a concentration of 250 ppm250\text{ ppm}. Assuming a solution density of 1.000 g/mL1.000\text{ g/mL}, determine its mass percent and molarity.

Answer

Mass percent=0.0250%, Molarity=1.39×10−3 M\text{Mass percent} = 0.0250\%,\text{ Molarity} = 1.39 \times 10^{-3}\text{ M}. Converting ppm to mass percent gives 250 ppm104=0.0250%\frac{250\text{ ppm}}{10^4} = 0.0250\%. In 1.000 L1.000\text{ L} (1000 g1000\text{ g}) of solution, solute mass is 0.250 g0.250\text{ g}. Moles =0.250 g180.16 g/mol=1.388×10−3 mol= \frac{0.250\text{ g}}{180.16\text{ g/mol}} = 1.388 \times 10^{-3}\text{ mol}, giving M=1.39×10−3 MM = 1.39 \times 10^{-3}\text{ M}.

03

A dilute aqueous hydrochloric acid solution (HCl\ce{HCl}, molar mass =36.46 g/mol= 36.46\text{ g/mol}) has a mass percent of 0.0729%0.0729\% and a measured density of 1.020 g/mL1.020\text{ g/mL}. Calculate the molarity of HCl\ce{HCl} in this solution.

Answer

Molarity=0.0204 M\text{Molarity} = 0.0204\text{ M}. In 1.000 L1.000\text{ L} (1000 mL1000\text{ mL}) of solution, total mass is 1000 mL×1.020 g/mL=1020 g1000\text{ mL} \times 1.020\text{ g/mL} = 1020\text{ g}. Solute mass is 1020 g×0.0729100=0.7436 g1020\text{ g} \times \frac{0.0729}{100} = 0.7436\text{ g}. Moles of HCl=0.7436 g36.46 g/mol=0.0204 mol\ce{HCl} = \frac{0.7436\text{ g}}{36.46\text{ g/mol}} = 0.0204\text{ mol}, so M=0.0204 mol1.000 L=0.0204 MM = \frac{0.0204\text{ mol}}{1.000\text{ L}} = 0.0204\text{ M}.

Loading workspace…