Resources

Consider the constitutionally isomeric alkenes with the molecular formula C4H8\text{C}_4\text{H}_8: but-11-ene, (2E)(2E)-but-22-ene, (2Z)(2Z)-but-22-ene, and 22-methylprop-11-ene. Many students assume that the cis-isomer ((2Z)(2Z)-but-22-ene) is thermodynamically more stable than the trans-isomer ((2E)(2E)-but-22-ene) because both methyl groups reside on the same side of the double bond. Explain the true relative thermodynamic stability of these two geometric isomers in terms of steric repulsion, calculate their standard heats of combustion difference if ΔHcomb∘[(2Z)-but−2-ene]=−2710.3 kJ/mol\Delta H^\circ_{\text{comb}}[(2Z)\text{-but}-2\text{-ene}] = -2710.3\text{ kJ/mol} and ΔHcomb∘[(2E)-but−2-ene]=−2706.1 kJ/mol\Delta H^\circ_{\text{comb}}[(2E)\text{-but}-2\text{-ene}] = -2706.1\text{ kJ/mol}, and give the systematic IUPAC names of both stereoisomers.

Answer and steps

Final answer

Stability & energetic difference: (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable by 4.2 kJ/mol4.2\text{ kJ/mol} due to the relief of steric strain (van der Waals repulsion between methyl groups on the same side in the (2Z)(2Z) isomer); IUPAC names: (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} and (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene}

Steps

01

IUPAC Nomenclature and CIP Rules

The stereoisomers of but-22-ene differ in the spatial arrangement of substituents across the rigid carbon-carbon double bond (C=C\ce{C=C}):

  • At each sp2sp^2-hybridized carbon atom, compare the two bonded substituents using the Cahn–Ingold–Prelog (CIP) priority rules: a methyl group (−CHX3\ce{-CH3}, priority 1) has higher atomic priority than a hydrogen atom (−H\ce{-H}, priority 2).
  • When both higher-priority methyl groups lie on the same side of the double bond, the configuration is assigned the prefix (Z)(Z) (from the German zusammen, meaning "together"). The systematic IUPAC name is (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} (commonly known as cis-but-22-ene).
  • When the higher-priority methyl groups lie on opposite sides across the double bond, the configuration is assigned the prefix (E)(E) (from the German entgegen, meaning "opposite"). The systematic IUPAC name is (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} (commonly known as trans-but-22-ene).

02

Steric Repulsion and Relative Thermodynamic Stability

  • In (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene}, the two bulky methyl groups are forced into close proximity on the same side of the non-rotatable double bond. The electron clouds of their hydrogen atoms interpenetrate each other's van der Waals radii, creating non-bonded steric strain (van der Waals repulsion). This increases the internal potential energy of the molecule.
  • In (2E)-but−2-ene(2E)\text{-but}-2\text{-ene}, the two methyl groups are oriented on opposite sides of the double bond (separated by an angle of approximately 180∘180^\circ across the plane of the π\pi system), which relieves steric interference and minimizes van der Waals repulsion.
  • Therefore, the (2E)(2E) isomer is thermodynamically more stable than the (2Z)(2Z) isomer.

Common Pitfall: Students sometimes assume that substituents placed on the same side "stabilize each other" through symmetry or dipole interaction. In acyclic alkenes without intramolecular hydrogen bonding, crowding like substituents onto the same face always destabilizes the molecule due to steric hindrance.


03

Quantitative Energy Difference from Heats of Combustion

Both isomers undergo complete combustion to yield identical molar amounts of carbon dioxide and water: CX4HX8(g)+6 OX2(g)→4 COX2(g)+4 HX2O(l)\ce{C4H8(g) + 6 O2(g) -> 4 CO2(g) + 4 H2O(l)}

Since both reactions arrive at the exact same product energy level, the isomer with a more negative heat of combustion starts at a higher enthalpy level (is less stable):

ΔH∘=∣ΔHcomb∘[(2Z)-but−2-ene]∣−∣ΔHcomb∘[(2E)-but−2-ene]∣\Delta H^\circ = |\Delta H^\circ_{\text{comb}}[(2Z)\text{-but}-2\text{-ene}]| - |\Delta H^\circ_{\text{comb}}[(2E)\text{-but}-2\text{-ene}]| ΔH∘=2710.3 kJ/mol−2706.1 kJ/mol=4.2 kJ/mol\Delta H^\circ = 2710.3\text{ kJ/mol} - 2706.1\text{ kJ/mol} = 4.2\text{ kJ/mol}

Because (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} releases 4.2 kJ/mol4.2\text{ kJ/mol} more energy upon combustion, (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable by 4.2 kJ/mol4.2\text{ kJ/mol}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the negative values of heat of combustion and incorrectly concludes that the more negative value corresponds to higher thermodynamic stability.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} is more stable than (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} because steric crowding brings the methyl groups close together to maximize bonding interactions. Steric hindrance destabilizes (2E)-but−2-ene(2E)\text{-but}-2\text{-ene}.

    Correct

    (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable than (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} because having the bulky methyl groups on opposite sides minimizes steric strain (van der Waals repulsion). In (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene}, the methyl groups are forced onto the same side, causing destabilizing steric crowding.

    Steric crowding between non-bonded groups causes electron-cloud repulsion (van der Waals strain), which raises the potential energy and destabilizes the molecule. Placing the methyl groups on opposite sides in (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} relieves this repulsion, making the (2E)(2E) isomer more stable.

  2. Step 2

    Difference=−2710.3−(−2706.1)=−4.2 kJ/mol  ⟹  \text{Difference} = -2710.3 - (-2706.1) = -4.2\text{ kJ/mol} \implies A more negative heat of combustion means lower energy and greater stability, so (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} is more stable by 4.2 kJ/mol4.2\text{ kJ/mol}.

    Correct

    ΔH∘=∣ΔHcomb∘[(2Z)]∣−∣ΔHcomb∘[(2E)]∣=2710.3 kJ/mol−2706.1 kJ/mol=4.2 kJ/mol\Delta H^\circ = |\Delta H^\circ_{\text{comb}}[(2Z)]| - |\Delta H^\circ_{\text{comb}}[(2E)]| = 2710.3\text{ kJ/mol} - 2706.1\text{ kJ/mol} = 4.2\text{ kJ/mol}, meaning (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable by 4.2 kJ/mol4.2\text{ kJ/mol}.

    Both isomers burn to give the exact same products (4COX2+4HX2O4\ce{CO2} + 4\ce{H2O}). Releasing more energy upon combustion (a more negative ΔHcomb∘\Delta H^\circ_{\text{comb}}) means the (2Z)(2Z) isomer started at a higher potential energy level on an enthalpy diagram, making it less stable than the (2E)(2E) isomer.

  3. Step 3

    (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} and (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the systematic IUPAC names for both stereoisomers.

You correctly calculated the numerical magnitude of the difference between the two combustion values (4.2 kJ/mol4.2\text{ kJ/mol}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Combustion Enthalpy and Steric Strain Inversion

You treated heat of combustion as absolute molecular enthalpy rather than energy released relative to identical combustion products.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that steric crowding creates stabilizing bonding interactions rather than destabilizing van der Waals repulsion, and you misconstrued a more exothermic combustion reaction as indicating lower initial reactant enthalpy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Steric Crowding in Alkenes
  • Steric crowding between adjacent alkyl groups causes van der Waals repulsion, which destabilizes the isomer.

  • Always identify the isomer that places bulky groups farther apart (trans / E) as having lower steric strain and therefore higher thermodynamic stability.

Enthalpy Level vs. Heat of Combustion
  • For constitutional or stereochemical isomers that combust to identical products, higher heat released (∣ΔHcomb∘∣|\Delta H^\circ_{\text{comb}}| or more negative ΔHcomb∘\Delta H^\circ_{\text{comb}}) indicates higher initial reactant enthalpy (lower stability).

  • Draw a vertical enthalpy diagram: place the identical products at the bottom, and place the isomer releasing more heat higher up.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the combustion enthalpy diagram with 4 COX2(g)+4 HX2O(l)\ce{4 CO2(g) + 4 H2O(l)} as the common reference energy level at the bottom.

  2. Compare the magnitudes: (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} releases 2710.3 kJ/mol2710.3\text{ kJ/mol}, while (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} releases 2706.1 kJ/mol2706.1\text{ kJ/mol}.

  3. Calculate the difference: 2710.3 kJ/mol−2706.1 kJ/mol=4.2 kJ/mol2710.3\text{ kJ/mol} - 2706.1\text{ kJ/mol} = 4.2\text{ kJ/mol}.

  4. Conclude that (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} lies 4.2 kJ/mol4.2\text{ kJ/mol} higher in potential energy, so (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is thermodynamically more stable by 4.2 kJ/mol4.2\text{ kJ/mol}.

Final answer

(2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable by 4.2 kJ/mol4.2\text{ kJ/mol}; systematic names: (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} and (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing vertical enthalpy reaction coordinate diagrams for combustion reactions of isomeric pairs.

  • Review van der Waals radii and non-bonded repulsion in cis vs. trans alkenes.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the heats of combustion in reverse order without accounting for signs, obtaining a positive difference but misidentifying which isomer has higher energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable than (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} because the methyl groups are on opposite sides, avoiding steric repulsion. In (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene}, steric repulsion between the cis methyl groups raises its energy.

  2. Step 2

    Difference\text{Difference} = -2706.1 kJ/mol\text{ kJ/mol} - (-2710.3 kJ/mol\text{ kJ/mol}) = +4.2 kJ/mol\text{ kJ/mol}

  3. Step 3

    Because the difference is positive, (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} releases more heat and is therefore less stable.

    Correct

    Because ∣ΔHcomb∘[(2Z)]∣>∣ΔHcomb∘[(2E)]∣|\Delta H^\circ_{\text{comb}}[(2Z)]| > |\Delta H^\circ_{\text{comb}}[(2E)]|, (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} releases 4.2 kJ/mol4.2\text{ kJ/mol} more heat upon combustion to the same products, confirming that (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} sits at a lower enthalpy level and is more stable by 4.2 kJ/mol4.2\text{ kJ/mol}.

    Combustion is exothermic, so the enthalpy of combustion is negative. The quantity of heat released is given by the absolute value: (2Z)(2Z) releases 2710.3 kJ/mol2710.3\text{ kJ/mol}, whereas (2E)(2E) releases only 2706.1 kJ/mol2706.1\text{ kJ/mol}. Releasing more heat means the (2Z)(2Z) isomer begins at a higher potential energy level and is less stable.

  4. Step 4

    (2E)-but−2-ene and (2Z)-but−2-ene(2E)\text{-but}-2\text{-ene}\text{ and }(2Z)\text{-but}-2\text{-ene}

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained the stereochemical basis of steric strain between cis methyl groups.

You correctly computed the numerical value of 4.2 kJ/mol4.2\text{ kJ/mol}.

You properly designated both stereoisomers with systematic (E)(E) and (Z)(Z) prefixes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Heat of combustion sign misinterpretation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the algebraic sign convention of exothermic reactions (ΔH<0\Delta H < 0) with the actual quantity of heat released (q=−ΔHq = -\Delta H), leading to an inverted conclusion regarding relative ground-state stability.

REASONING PATH
Your ACEpath teacher’s suggested approach
Heat Released vs. Algebraic Enthalpy
  • Combustion is exothermic, so ΔHcomb∘\Delta H^\circ_{\text{comb}} is negative. The heat released is the absolute value ∣ΔHcomb∘∣|\Delta H^\circ_{\text{comb}}|.

  • Always compare the magnitudes of ΔHcomb∘\Delta H^\circ_{\text{comb}} when comparing heat released.

Enthalpy Level and Stability
  • Isomers combust into identical products (4COX2+4HX2O4\ce{CO2} + 4\ce{H2O}). The isomer that releases more heat must have started higher on the enthalpy ladder.

  • More negative ΔHcomb∘  ⟹  \Delta H^\circ_{\text{comb}} \implies higher initial enthalpy   ⟹  \implies lower thermodynamic stability.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the magnitude of energy released: ∣−2710.3 kJ/mol∣=2710.3 kJ/mol|-2710.3\text{ kJ/mol}| = 2710.3\text{ kJ/mol} for the (2Z)(2Z) isomer vs. ∣−2706.1 kJ/mol∣=2706.1 kJ/mol|-2706.1\text{ kJ/mol}| = 2706.1\text{ kJ/mol} for the (2E)(2E) isomer.

  2. Recognize that (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} releases 4.2 kJ/mol4.2\text{ kJ/mol} more heat to form the exact same combustion products.

  3. Conclude that (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} starts at an enthalpy level 4.2 kJ/mol4.2\text{ kJ/mol} higher, meaning (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more thermodynamically stable by 4.2 kJ/mol4.2\text{ kJ/mol}.

Final answer

(2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable than (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} by 4.2 kJ/mol4.2\text{ kJ/mol} due to the absence of steric strain between the methyl groups; systematic IUPAC names are (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} and (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch an enthalpy reaction coordinate diagram showing both reactants dropping down to the common product level (4COX2+4HX2O4\ce{CO2} + 4\ce{H2O}).

  • Practice converting negative ΔHcomb∘\Delta H^\circ_{\text{comb}} values directly to 'heat released' before comparing thermodynamic stability.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the IUPAC stereochemical descriptors (E) and (Z) with cis/trans nomenclature rules, assigning (Z) to the trans isomer and (E) to the cis isomer.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable than (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} because steric clash occurs when both methyl groups are on the same side in the cis isomer. The trans isomer keeps the bulky methyl groups apart.

  2. Step 2

    ΔHcomb∘[(2Z)]−ΔHcomb∘[(2E)]=−2710.3−(−2706.1)=−4.2 kJ/mol\Delta H^\circ_{\text{comb}}[(2Z)] - \Delta H^\circ_{\text{comb}}[(2E)] = -2710.3 - (-2706.1) = -4.2\text{ kJ/mol}

  3. Step 3

    trans-isomer=(2Z)-but−2-ene  ⟹  cis-isomer=(2E)-but−2-ene\text{trans-isomer} = (2Z)\text{-but}-2\text{-ene} \implies \text{cis-isomer} = (2E)\text{-but}-2\text{-ene}

    Correct

    cis-isomer=(2Z)-but−2-ene\text{cis-isomer} = (2Z)\text{-but}-2\text{-ene} and trans-isomer=(2E)-but−2-ene\text{trans-isomer} = (2E)\text{-but}-2\text{-ene}

    You inverted the (E)(E) and (Z)(Z) IUPAC stereodescriptors. Under CIP priority rules, methyl (−CHX3-\ce{CH3}) has higher priority than hydrogen (−H-\ce{H}) at each carbon. When high-priority groups are on the same side (cis), the descriptor is (Z)(Z) (from zusammen); when on opposite sides (trans), the descriptor is (E)(E) (from entgegen).

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly articulated how steric strain between the two methyl groups accounts for the difference in thermodynamic stability.

You carried out the arithmetic for the heats of combustion difference correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stereochemistry descriptor reversal

You swapped the definitions of (E)(E) and (Z)(Z) prefixes when matching them with cis and trans configurations.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the Cahn–Ingold–Prelog descriptor (Z)(Z) (zusammen, together on the same side) with trans, and (E)(E) (entgegen, opposite sides) with cis.

REASONING PATH
Your ACEpath teacher’s suggested approach
CIP (E)/(Z) Nomenclature
  • (Z)(Z) stands for zusammen (together/same side, corresponding to cis for simple disubstituted alkenes), while (E)(E) stands for entgegen (opposite, corresponding to trans).

  • Assign CIP priorities (1 vs 2) at each sp2sp^2 carbon: if priority-1 groups lie on the same side of the double bond, assign (Z)(Z); if on opposite sides, assign (E)(E).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the higher-priority group on each sp2sp^2 carbon of but-2-ene: −CHX3-\ce{CH3} (priority 1) > −H-\ce{H} (priority 2).

  2. For the cis isomer, both −CHX3-\ce{CH3} groups are on the same side of the C=C\ce{C=C} bond, giving the prefix (Z)(Z) (zusammen), so its IUPAC name is (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene}.

  3. For the trans isomer, the −CHX3-\ce{CH3} groups are on opposite sides across the C=C\ce{C=C} bond, giving the prefix (E)(E) (entgegen), so its IUPAC name is (2E)-but−2-ene(2E)\text{-but}-2\text{-ene}.

Final answer

(2E)-but−2-ene(2E)\text{-but}-2\text{-ene} is more stable by 4.2 kJ/mol4.2\text{ kJ/mol}; the cis isomer is (2Z)-but−2-ene(2Z)\text{-but}-2\text{-ene} and the trans isomer is (2E)-but−2-ene(2E)\text{-but}-2\text{-ene}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic Z-same-side (cis) and E-opposite/across (trans) to avoid swapping descriptors.

  • Practice assigning (E)(E) and (Z)(Z) descriptors on tri- and tetra-substituted alkenes where cis/trans nomenclature is ambiguous.

Lock it in

Similar question

01

Two isomeric dimethylcyclopropanes have heats of combustion of −2018 kJ/mol-2018\text{ kJ/mol} and −2024 kJ/mol-2024\text{ kJ/mol}. State which value corresponds to trans-1,21,2-dimethylcyclopropane and which to cis-1,21,2-dimethylcyclopropane, and calculate their stability difference.

Answer

trans-1,21,2-dimethylcyclopropane has ΔHcomb∘=−2018 kJ/mol\Delta H^\circ_{\text{comb}} = -2018\text{ kJ/mol} and cis-1,21,2-dimethylcyclopropane has −2024 kJ/mol-2024\text{ kJ/mol}; the trans isomer is more stable by 6 kJ/mol6\text{ kJ/mol} due to reduced steric crowding between the two methyl groups.

02

Explain why (2E)(2E)-hex-33-ene has a smaller magnitude of heat of hydrogenation than (2Z)(2Z)-hex-33-ene, and state what this reveals about their relative ground-state energies.

Answer

Both isomers hydrogenate to identical hexane (nn-hexane). The (2E)(2E) isomer is more stable (lower ground-state energy) due to minimal steric repulsion between ethyl and methyl groups, so it releases less energy during hydrogenation.

03

Consider (2E)(2E)-but-22-ene, (2Z)(2Z)-but-22-ene, and 22-methylprop-11-ene. Given that 22-methylprop-11-ene is more stable than both but-22-ene isomers, explain this trend in terms of alkene substitution patterns and hyperconjugation.

Answer

Alkene stability increases with the number of alkyl substituents attached to the sp2sp^2 carbons. While all three are disubstituted, geminal disubstitution in 22-methylprop-11-ene allows effective hyperconjugative electron donation without the steric crowding found in (2Z)(2Z), and with slightly favorable electronic stabilization compared to (2E)(2E).

Loading workspace…