Resources

A high school student tests an aqueous solution labeled 'Sample K-Mix' containing both KCl\text{KCl} (0.10 M0.10\text{ M}) and trace NaCl\text{NaCl} (0.002 M0.002\text{ M}). When placing the wire loop into the burner flame without an optical filter, the student reports: 'The solution contains only sodium because the flame is bright yellow; potassium is absent.' (a) Diagnose the convention/spectroscopic trap in the student's conclusion. (b) Explain the optical mechanism of using a cobalt blue glass filter to resolve this interference, detailing which wavelengths are absorbed versus transmitted. (c) If potassium emits two primary spectral lines in the visible region at λ1=766.5 nm\lambda_1 = 766.5\text{ nm} (violet/deep-red) and λ2=404.4 nm\lambda_2 = 404.4\text{ nm} (violet), while sodium emits at λ=589.0 nm\lambda = 589.0\text{ nm}, calculate the frequency ν2\nu_2 (in Hz\text{Hz}) corresponding to the potassium violet line (404.4 nm404.4\text{ nm}) that is visibly unmasked by the cobalt glass.

Answer and steps

Final answer

(a) The student committed a masking error: sodium's 589 nm589\text{ nm} doublet has an extremely high transition probability (oscillator strength) and human ocular sensitivity, visually blinding the observer to potassium's faint violet emission; (b) Cobalt blue glass contains Co2+\text{Co}^{2+} complexes that absorb yellow light (560–600 nm560\text{--}600\text{ nm}) while transmitting high-energy violet/blue (400–450 nm400\text{--}450\text{ nm}) and far-red light (>700 nm>700\text{ nm}), allowing observation of potassium's lilac flame; (c) ν2=7.413×1014 Hz\nu_2 = 7.413 \times 10^{14}\text{ Hz}

Steps

(a) Diagnostic of the Student's Error

The student fell into a masking error (optical masking):

  1. High Transition Probability: The sodium atomic emission at λ=589.0 nm\lambda = 589.0\text{ nm} (the intense yellow D\text{D}-line doublet arising from the 3p→3s3p \to 3s electronic relaxation) has an exceptionally high transition probability (oscillator strength). Even trace amounts of NaX+\ce{Na+} (0.002 M0.002\text{ M}) produce an intensely bright yellow flame.
  2. Human Eye Sensitivity: The human eye has peak photopic sensitivity in the yellow-green region (around 555 nm555\text{ nm}), making it disproportionately sensitive to sodium's 589 nm589\text{ nm} emission compared to potassium's faint emission lines.
  3. Conclusion: The intense yellow emission completely overwhelms and obscures the pale violet/lilac flame of potassium, so the absence of a visible lilac color to the unaided eye does not mean potassium is absent.

(b) Optical Mechanism of the Cobalt Blue Glass Filter

Cobalt blue glass contains octahedrally and tetrahedrally coordinated CoX2+\ce{Co^2+} transition metal ions in the silicate matrix, which exhibit selective absorption:

  • Absorption of Yellow Light: The d-d\text{d-d} electronic transitions of CoX2+\ce{Co^2+} absorb light strongly in the yellow-orange spectral window (≈560–600 nm\approx 560\text{--}600\text{ nm}). This effectively blocks the blinding 589.0 nm589.0\text{ nm} emission of sodium.
  • Transmission of Violet and Red Light: The glass has transmission windows in the violet/blue region (≈400–450 nm\approx 400\text{--}450\text{ nm}) and in the deep-red region (>700 nm> 700\text{ nm}).

As a result, the sodium yellow light is filtered out, while potassium's characteristic emission lines at λ1=766.5 nm\lambda_1 = 766.5\text{ nm} (deep red) and λ2=404.4 nm\lambda_2 = 404.4\text{ nm} (violet) pass through, unmasking the characteristic lilac flame of KX+\ce{K+}.


(c) Calculation of the Frequency (ν2\nu_2) for Potassium's Violet Line

The relationship between the speed of light (cc), wavelength (λ\lambda), and frequency (ν\nu) is given by: c=νλ  ⟹  ν=cλc = \nu \lambda \implies \nu = \frac{c}{\lambda}

  1. Identify the Given Values:

    • Wavelength: λ2=404.4 nm=404.4×10−9 m\lambda_2 = 404.4\text{ nm} = 404.4 \times 10^{-9}\text{ m}
    • Speed of light in vacuum: c≈2.998×108 m/sc \approx 2.998 \times 10^8\text{ m/s}
  2. Substitute into the Formula: ν2=2.998×108 m/s404.4×10−9 m\nu_2 = \frac{2.998 \times 10^8\text{ m/s}}{404.4 \times 10^{-9}\text{ m}}
  3. Compute the Value: ν2≈7.413×1014 s−1=7.413×1014 Hz\nu_2 \approx 7.413 \times 10^{14}\text{ s}^{-1} = 7.413 \times 10^{14}\text{ Hz}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert nanometers to meters before dividing by the speed of light, yielding a frequency off by nine orders of magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Sodium emission at 589 nm589\text{ nm} is very bright and overpowers the faint lilac flame of potassium, masking it from direct observation.

  2. Step 2

    Cobalt glass absorbs yellow light around 589 nm589\text{ nm} from sodium and transmits violet light around 404 nm404\text{ nm} from potassium.

  3. Step 3

    ν=cλ  ⟹  ν=3.00×108404.4=7.42×105 Hz\nu = \frac{c}{\lambda} \implies \nu = \frac{3.00 \times 10^8}{404.4} = 7.42 \times 10^5\text{ Hz}

    Correct

    ν2=cλ2=2.998×108 m/s404.4×10−9 m≈7.413×1014 Hz\nu_2 = \frac{c}{\lambda_2} = \frac{2.998 \times 10^8\text{ m/s}}{404.4 \times 10^{-9}\text{ m}} \approx 7.413 \times 10^{14}\text{ Hz}

    You set up the formula ν=cλ\nu = \frac{c}{\lambda} correctly, but you substituted λ=404.4\lambda = 404.4 directly without converting nanometers to meters (1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}). Because cc is in m/s\text{m/s}, λ\lambda must be in m\text{m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly diagnosed the optical masking effect caused by sodium's bright emission.

You clearly explained which wavelengths are absorbed and transmitted by cobalt blue glass.

You selected the correct physical relationship ν=cλ\nu = \frac{c}{\lambda} between frequency, wavelength, and the speed of light.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You plugged the wavelength value in nanometers (404.4404.4) directly into the denominator without appending the 10−9 m10^{-9}\text{ m} metric prefix.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit compatibility between the speed of light in meters per second (c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}) and wavelength given in nanometers (nm\text{nm}), leading to an answer missing a factor of 10910^9.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Units with Fundamental Constants
  • The speed of light cc is expressed in m/s\text{m/s}, requiring λ\lambda to be in meters (m\text{m}) so that m/sm=s−1=Hz\frac{\text{m/s}}{\text{m}} = \text{s}^{-1} = \text{Hz}.

  • Always convert nanometers to meters using 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m} before evaluating c=λνc = \lambda \nu or E=hcλE = \frac{hc}{\lambda}.

Order-of-Magnitude Sanity Check
  • Visible light always has frequencies on the order of 1014–1015 Hz10^{14}\text{--}10^{15}\text{ Hz}.

  • If your calculated frequency for visible light is around 105–106 Hz10^5\text{--}10^6\text{ Hz} (which corresponds to AM radio waves), recheck your unit conversions immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert wavelength from nanometers to meters: λ2=404.4 nm=404.4×10−9 m\lambda_2 = 404.4\text{ nm} = 404.4 \times 10^{-9}\text{ m}.

  2. Substitute into ν=cλ\nu = \frac{c}{\lambda}: ν2=2.998×108 m/s404.4×10−9 m\nu_2 = \frac{2.998 \times 10^8\text{ m/s}}{404.4 \times 10^{-9}\text{ m}}.

  3. Evaluate the quotient: ν2≈7.413×1014 Hz\nu_2 \approx 7.413 \times 10^{14}\text{ Hz} (or 7.42×1014 Hz7.42 \times 10^{14}\text{ Hz} using c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}).

Final answer

ν2=7.413×1014 Hz\nu_2 = 7.413 \times 10^{14}\text{ Hz}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing the metric power-of-ten prefix immediately whenever given wavelengths (e.g., write 404.4 nm404.4\text{ nm} as 404.4×10−9 m404.4 \times 10^{-9}\text{ m}).

  • Perform a magnitude reasonableness check: visible photons must always yield frequencies around 1014 Hz10^{14}\text{ Hz}.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the role of cobalt blue glass by assuming it absorbs the potassium emission rather than the sodium emission.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The intense yellow color of sodium hides the faint violet flame of potassium.

  2. Step 2

    Cobalt glass absorbs violet light at 404.4 nm404.4\text{ nm} and transmits the yellow light at 589.0 nm589.0\text{ nm} so sodium can be confirmed.

    Correct

    Cobalt blue glass contains CoX2+\ce{Co^{2+}} ions that absorb yellow light (560–600 nm560\text{--}600\text{ nm}, including Na\text{Na} at 589.0 nm589.0\text{ nm}) and transmit violet/blue light (400–450 nm400\text{--}450\text{ nm}, including K\text{K} at 404.4 nm404.4\text{ nm}) and deep-red light (>700 nm>700\text{ nm}).

    You inverted the optical behavior of the filter. Cobalt blue glass is blue because it absorbs yellow light (blocking the sodium 589.0 nm589.0\text{ nm} doublet) while transmitting violet and deep-red wavelengths, allowing the potassium flame to be viewed without sodium interference.

  3. Step 3

    ν=cλ  ⟹  ν=3.00×108 m/s404.4×10−9 m=7.42×1014 Hz\nu = \frac{c}{\lambda} \implies \nu = \frac{3.00 \times 10^8\text{ m/s}}{404.4 \times 10^{-9}\text{ m}} = 7.42 \times 10^{14}\text{ Hz}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that sodium's intense flame emission masks the weaker potassium emission.

You correctly set up and solved the wave frequency equation with appropriate unit conversions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Filter Absorption/Transmission Inversion

You originally began writing that cobalt glass absorbs yellow, but crossed it out and mistakenly concluded that it transmits yellow and absorbs violet.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misunderstanding the physical reason cobalt glass appears blue: a colored optical filter transmits light of its own color (blue/violet) and absorbs complementary wavelengths (yellow/orange), rather than blocking the color it matches.

REASONING PATH
Your ACEpath teacher’s suggested approach
Filter Color and Transmission Principle
  • A colored filter transmits wavelengths corresponding to its visible color and absorbs complementary colors.

  • Because cobalt glass appears deep blue-violet, remember that it transmits blue/violet light and absorbs yellow light.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the target element: we use cobalt glass specifically to unmask potassium, which emits violet light (404.4 nm404.4\text{ nm}) and red light (766.5 nm766.5\text{ nm}).

  2. Apply the absorption rule: CoX2+\ce{Co^{2+}} ions absorb yellow-orange light in the range 560–600 nm560\text{--}600\text{ nm}, absorbing the intense 589.0 nm589.0\text{ nm} sodium emission.

  3. Identify transmitted wavelengths: the filter transmits violet light (400–450 nm400\text{--}450\text{ nm}) and deep-red light (>700 nm>700\text{ nm}), allowing potassium's lilac flame to be confirmed.

Final answer

(a) Sodium's intense yellow flame optically masks the faint lilac emission of potassium; (b) Cobalt blue glass absorbs yellow light (589.0 nm589.0\text{ nm}) and transmits violet (404.4 nm404.4\text{ nm}) and red light (766.5 nm766.5\text{ nm}), confirming potassium; (c) ν2≈7.41×1014 Hz\nu_2 \approx 7.41 \times 10^{14}\text{ Hz} (or 7.42×1014 Hz7.42 \times 10^{14}\text{ Hz})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the complementary color wheel to connect a filter's observed color to the wavelengths it transmits versus absorbs.

  • Practice identifying which flame emissions are blocked versus observed when different colored filters are placed in front of multi-element mixtures.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the speed of light by wavelength instead of dividing, confusing the wave speed formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Sodium emits bright yellow light that easily masks the subtle violet flame of potassium.

  2. Step 2

    Cobalt glass absorbs yellow wavelengths around 589 nm589\text{ nm} and transmits violet wavelengths around 404.4 nm404.4\text{ nm}.

  3. Step 3

    ν=c×λ\nu = c \times \lambda

    Correct

    c=νλ  ⟹  ν=cλc = \nu \lambda \implies \nu = \frac{c}{\lambda}

    You multiplied the speed of light by wavelength rather than dividing it. Since c=νλc = \nu \lambda, isolating frequency gives ν=cλ\nu = \frac{c}{\lambda}.

  4. Step 4

    ν=(3.00×108 m/s)×(404.4×10−9 m)=1.21×102 Hz\nu = (3.00 \times 10^8\text{ m/s}) \times (404.4 \times 10^{-9}\text{ m}) = 1.21 \times 10^2\text{ Hz}

    Correct

    ν2=2.998×108 m/s404.4×10−9 m≈7.413×1014 Hz\nu_2 = \frac{2.998 \times 10^8\text{ m/s}}{404.4 \times 10^{-9}\text{ m}} \approx 7.413 \times 10^{14}\text{ Hz}

    Your arithmetic followed your stated formula, but because the formula was inverted, the resulting numerical value and units are incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the intense yellow emission of sodium masks potassium's subtle violet flame.

You accurately stated that cobalt blue glass absorbs yellow light around 589 nm589\text{ nm} while transmitting violet wavelengths around 404.4 nm404.4\text{ nm}.

You properly converted nanometers to meters using the factor 10−9 m/nm10^{-9}\text{ m/nm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Relationship Confusion

Inverting the algebraic rearrangement of c=νλc = \nu \lambda by multiplying cc and λ\lambda instead of dividing.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the wave equation relationship between wave speed, wavelength, and frequency. Multiplying speed (m/s)(\text{m/s}) by wavelength (m)(\text{m}) produces units of m2/s\text{m}^2/\text{s}, whereas frequency requires inverse seconds (s−1 or Hz)(\text{s}^{-1}\text{ or Hz}), which comes from dividing speed by wavelength.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Equation Isolation
  • c=νλ  ⟹  ν=cλc = \nu \lambda \implies \nu = \frac{c}{\lambda} and λ=cν\lambda = \frac{c}{\nu}

  • When solving for frequency, always divide the speed of light by the wavelength in meters.

Dimensional Unit Check
  • m/sm=s−1=Hz\frac{\text{m/s}}{\text{m}} = \text{s}^{-1} = \text{Hz}

  • Check your units before calculating: multiplying (m/s)×(m)(\text{m/s}) \times (\text{m}) gives m2/s\text{m}^2/\text{s}, which flags that the operation must be division.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the wave equation relating speed, frequency, and wavelength: c=νλc = \nu \lambda.

  2. Isolate frequency by dividing both sides by wavelength: ν=cλ\nu = \frac{c}{\lambda}.

  3. Convert λ2=404.4 nm\lambda_2 = 404.4\text{ nm} to meters: λ2=404.4×10−9 m\lambda_2 = 404.4 \times 10^{-9}\text{ m}.

  4. Substitute c=2.998×108 m/sc = 2.998 \times 10^8\text{ m/s} and calculate: ν2=2.998×108 m/s404.4×10−9 m≈7.413×1014 Hz\nu_2 = \frac{2.998 \times 10^8\text{ m/s}}{404.4 \times 10^{-9}\text{ m}} \approx 7.413 \times 10^{14}\text{ Hz}.

Final answer

ν2=7.413×1014 Hz\nu_2 = 7.413 \times 10^{14}\text{ Hz}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the algebraic isolation of variables in the wave speed formula c=νλc = \nu \lambda.

  • Practice performing dimensional analysis on wave formulas to catch multiplication vs. division errors early.

Lock it in

Similar question

01

Calculate the frequency (in Hz\text{Hz}) of the yellow sodium flame emission line at λ=589.0 nm\lambda = 589.0\text{ nm}, using c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}.

Answer

5.09×1014 Hz5.09 \times 10^{14}\text{ Hz}. First convert wavelength: λ=589.0×10−9 m\lambda = 589.0 \times 10^{-9}\text{ m}. Then compute ν=cλ=3.00×108 m/s589.0×10−9 m≈5.09×1014 Hz\nu = \frac{c}{\lambda} = \frac{3.00 \times 10^8\text{ m/s}}{589.0 \times 10^{-9}\text{ m}} \approx 5.09 \times 10^{14}\text{ Hz}.

02

The second visible emission line of potassium occurs in the deep red at λ1=766.5 nm\lambda_1 = 766.5\text{ nm}. Determine the energy (in joules, J\text{J}) of a single photon emitted at this wavelength. (h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}, c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s})

Answer

2.59×10−19 J2.59 \times 10^{-19}\text{ J}. Convert λ=766.5×10−9 m\lambda = 766.5 \times 10^{-9}\text{ m}. Using E=hcλ=(6.626×10−34 J⋅s)(3.00×108 m/s)766.5×10−9 m≈2.59×10−19 JE = \frac{hc}{\lambda} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(3.00 \times 10^8\text{ m/s})}{766.5 \times 10^{-9}\text{ m}} \approx 2.59 \times 10^{-19}\text{ J}.

03

A flame emission line is recorded with a frequency of ν=6.88×1014 Hz\nu = 6.88 \times 10^{14}\text{ Hz}. Calculate its wavelength in nanometers (nm\text{nm}) and identify whether this photon belongs to violet, green, or red light. (c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s})

Answer

λ=436 nm\lambda = 436\text{ nm} (violet/blue). Calculate λ=cν=3.00×108 m/s6.88×1014 s−1≈4.36×10−7 m=436 nm\lambda = \frac{c}{\nu} = \frac{3.00 \times 10^8\text{ m/s}}{6.88 \times 10^{14}\text{ s}^{-1}} \approx 4.36 \times 10^{-7}\text{ m} = 436\text{ nm}.

Loading workspace…