Resources

Write the chemical formula for ammonium phosphate, an ionic compound composed entirely of polyatomic ions. If a student dissolves 0.150 mol0.150\text{ mol} of pure solid ammonium phosphate into enough distilled water to prepare 500.0 mL500.0\text{ mL} of solution, calculate the molar concentration (molarity, in mol/L\text{mol/L}) of ammonium ions ([NH4+][\text{NH}_4^+]) in the resulting solution, assuming complete dissociation.

Answer and steps

Final answer

Chemical formula: (NH4)3PO4(\text{NH}_4)_3\text{PO}_4; [NH4+]=0.900 M[\text{NH}_4^+] = 0.900\text{ M}

Steps

01

Determine the Chemical Formula of Ammonium Phosphate

  1. Identify the constituent polyatomic ions and their charges:

    • Ammonium ion: NHX4X+\ce{NH4+} (charge: +1+1)
    • Phosphate ion: POX4X3−\ce{PO4^3-} (charge: −3-3)
  2. Balance the electrical charges: An ionic compound must be electrically neutral overall. To balance the −3-3 charge of one phosphate ion, three ammonium ions (+1+1 each) are required: 3(+1)+1(−3)=03(+1) + 1(-3) = 0
  3. Write the formula using parentheses: Because more than one polyatomic ammonium ion is needed, place parentheses around NHX4\ce{NH4} with a subscript 33: (NHX4)X3POX4\ce{(NH4)3PO4}

Common Pitfall: Omitting parentheses (e.g., writing NHX43POX4\ce{NH43PO4}) is incorrect because the subscript must apply to the entire polyatomic group, not just the hydrogen atom.


02

Determine the Dissociation Equation in Water

Ammonium phosphate is a soluble ionic compound that dissociates completely into its constituent ions in aqueous solution: (NHX4)X3POX4(s)→3 NHX4X+(aq)+POX4X3−(aq)\ce{(NH4)3PO4(s) -> 3 NH4+(aq) + PO4^3-(aq)}

From the stoichiometry of the equation, each mole of solid (NHX4)X3POX4\ce{(NH4)3PO4} produces 3 moles3\text{ moles} of ammonium ions (NHX4X+\ce{NH4+}).


03

Calculate the Moles of Ammonium Ions

Using the given quantity of dissolved solid: n(NHX4X+)=3⋅n((NHX4)X3POX4)=3⋅0.150 mol=0.450 moln(\ce{NH4+}) = 3 \cdot n(\ce{(NH4)3PO4}) = 3 \cdot 0.150\text{ mol} = 0.450\text{ mol}


04

Calculate the Molar Concentration ([NHX4X+][\ce{NH4+}])

  1. Convert the solution volume from milliliters to liters: V=500.0 mL⋅1 L1000 mL=0.5000 LV = 500.0\text{ mL} \cdot \frac{1\text{ L}}{1000\text{ mL}} = 0.5000\text{ L}
  2. Apply the molarity formula (M=nVM = \frac{n}{V}): [NHX4X+]=n(NHX4X+)V=0.450 mol0.5000 L=0.900 mol/L=0.900 M[\ce{NH4+}] = \frac{n(\ce{NH4+})}{V} = \frac{0.450\text{ mol}}{0.5000\text{ L}} = 0.900\text{ mol/L} = 0.900\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the 3:1 dissociation stoichiometry and equates the concentration of ammonium ions directly to the concentration of the dissolved salt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NH4+ and PO43−  ⟹  (NH4)3PO4\text{NH}_4^+ \text{ and } \text{PO}_4^{3-} \implies (\text{NH}_4)_3\text{PO}_4

  2. Step 2

    V=500.0 mL=0.5000 LV = 500.0\text{ mL} = 0.5000\text{ L}

  3. Step 3

    [NH4+]=0.150 mol/0.5000 L=0.300 mol/L[\text{NH}_4^+] = 0.150\text{ mol} / 0.5000\text{ L} = 0.300\text{ mol/L}

    Correct

    n(NH4+)=3×0.150 mol=0.450 mol  ⟹  [NH4+]=0.450 mol0.5000 L=0.900 mol/Ln(\text{NH}_4^+) = 3 \times 0.150\text{ mol} = 0.450\text{ mol} \implies [\text{NH}_4^+] = \frac{0.450\text{ mol}}{0.5000\text{ L}} = 0.900\text{ mol/L}

    Because each formula unit of (NH4)3PO4(\text{NH}_4)_3\text{PO}_4 releases 33 ammonium ions upon dissociation, the concentration of NH4+\text{NH}_4^+ must be three times the salt concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the ammonium and phosphate ions with their respective +1+1 and −3-3 charges.

You properly balanced the ionic charges using parentheses to obtain the correct formula (NH4)3PO4(\text{NH}_4)_3\text{PO}_4.

You converted the volume of 500.0 mL500.0\text{ mL} to 0.5000 L0.5000\text{ L} correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dissociation Stoichiometry Omission

You equated the moles of ammonium ions directly to the moles of dissolved ammonium phosphate salt.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the molarity of an individual ion as identical to the molarity of the parent salt, overlooking the subscript 33 in (NH4)3PO4(\text{NH}_4)_3\text{PO}_4, which indicates that 1 mol1\text{ mol} of compound yields 3 mol3\text{ mol} of NH4+\text{NH}_4^+ upon complete dissociation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the Dissociation Equation
  • For a strong electrolyte AxBy(s)→xAy+(aq)+yBx−(aq)\text{A}_x\text{B}_y(s) \rightarrow x\text{A}^{y+}(aq) + y\text{B}^{x-}(aq), the ion concentration is [Ay+]=x⋅[AxBy][\text{A}^{y+}] = x \cdot [\text{A}_x\text{B}_y].

  • Always write out the balanced dissolution equation before calculating ion molarity to identify the stoichiometric multiplier.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the dissociation equation: (NH4)3PO4(s)→3NH4+(aq)+PO43−(aq)(\text{NH}_4)_3\text{PO}_4(s) \rightarrow 3\text{NH}_4^+(aq) + \text{PO}_4^{3-}(aq).

  2. Find total moles of ammonium ions: n(NH4+)=3×0.150 mol=0.450 moln(\text{NH}_4^+) = 3 \times 0.150\text{ mol} = 0.450\text{ mol}.

  3. Calculate molarity: [NH4+]=0.450 mol0.5000 L=0.900 M[\text{NH}_4^+] = \frac{0.450\text{ mol}}{0.5000\text{ L}} = 0.900\text{ M}.

Final answer

Chemical formula: (NH4)3PO4(\text{NH}_4)_3\text{PO}_4; [NH4+]=0.900 M[\text{NH}_4^+] = 0.900\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the balanced ionic dissociation equation whenever a question asks for the concentration of a specific ion rather than the overall salt.

  • Multiply the parent salt concentration by the ion's subscript to find that ion's true molarity in solution.

OverviewACEpath Teacher's Diagnosis

02 The student fails to balance the ionic charges of the polyatomic ions, writing the formula as NH4PO4 with a 1:1 ratio and carrying that ratio into the concentration calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    NHX4X+\ce{NH4+} and POX4X3−  ⟹  NHX4POX4\ce{PO4^3-} \implies \ce{NH4PO4}

    Correct

    NHX4X+\ce{NH4+} and POX4X3−  ⟹  (NHX4)X3POX4\ce{PO4^3-} \implies \ce{(NH4)3PO4}

    You recognized that the compound consists of NHX4X+\ce{NH4+} and POX4X3−\ce{PO4^3-}, but you combined them in a 1:11:1 ratio. Because ionic compounds must be electrically neutral, three +1+1 ammonium ions are required to balance one −3-3 phosphate ion, giving the formula (NHX4)X3POX4\ce{(NH4)3PO4}.

  2. Step 2

    NHX4POX4→NHX4X++POX4X3−  ⟹  n(NHX4X+)=0.150 mol\ce{NH4PO4 -> NH4+ + PO4^3-} \implies n(\ce{NH4+}) = 0.150\text{ mol}

    Correct

    (NHX4)X3POX4→3 NHX4X++POX4X3−  ⟹  n(NHX4X+)=3×0.150 mol=0.450 mol\ce{(NH4)3PO4 -> 3 NH4+ + PO4^3-} \implies n(\ce{NH4+}) = 3 \times 0.150\text{ mol} = 0.450\text{ mol}

    Because your chemical formula was NHX4POX4\ce{NH4PO4}, your dissociation equation produced only 1 mol1\text{ mol} of NHX4X+\ce{NH4+} per mole of compound. With the correct formula (NHX4)X3POX4\ce{(NH4)3PO4}, each formula unit releases 33 ammonium ions, yielding 0.450 mol0.450\text{ mol} of NHX4X+\ce{NH4+}.

  3. Step 3

    V=0.5000 L  ⟹  [NHX4X+]=0.150 mol0.5000 L=0.300 mol/LV = 0.5000\text{ L} \implies [\ce{NH4+}] = \frac{0.150\text{ mol}}{0.5000\text{ L}} = 0.300\text{ mol/L}

    Correct

    [NHX4X+]=0.450 mol0.5000 L=0.900 mol/L[\ce{NH4+}] = \frac{0.450\text{ mol}}{0.5000\text{ L}} = 0.900\text{ mol/L}

    You correctly converted 500.0 mL500.0\text{ mL} to 0.5000 L0.5000\text{ L} and divided moles by volume. However, because the mole value carried an error from Step 1, your final concentration was 0.300 M0.300\text{ M} instead of 0.900 M0.900\text{ M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the symbols and charges for both polyatomic ions, NHX4X+\ce{NH4+} and POX4X3−\ce{PO4^3-}.

You converted the volume from milliliters to liters accurately (500.0 mL=0.5000 L500.0\text{ mL} = 0.5000\text{ L}).

You correctly applied the molarity formula M=nVM = \frac{n}{V} to find the final concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unbalanced Ionic Charge in Chemical Formula

You combined a +1+1 cation and a −3-3 anion in a 1:11:1 ratio without balancing the net electrical charge to zero.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the two polyatomic ions as simple 1:11:1 partners rather than using subscripts to balance the total positive and total negative charges to achieve electrical neutrality.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Net Electrical Neutrality
  • The sum of positive and negative charges in any neutral ionic formula must equal zero: qtotal=ncation(z+)+nanion(z−)=0q_{\text{total}} = n_{\text{cation}}(z_+) + n_{\text{anion}}(z_-) = 0.

  • Always multiply the charge of each ion by its subscript to verify neutrality: 3(+1)+1(−3)=03(+1) + 1(-3) = 0.

Use Parentheses for Multiple Polyatomic Ions
  • When two or more units of a polyatomic ion are required in a formula, enclose the entire ion in parentheses before writing the subscript.

  • Enclose NHX4\ce{NH4} in parentheses and append the subscript 33: (NHX4)X3POX4\ce{(NH4)3PO4}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the charge-balance equation: x(+1)+y(−3)=0  ⟹  x=3,y=1x(+1) + y(-3) = 0 \implies x = 3, y = 1, giving the neutral formula (NHX4)X3POX4\ce{(NH4)3PO4}.

  2. Write the complete dissociation equation in water: (NHX4)X3POX4(s)→3 NHX4X+(aq)+POX4X3−(aq)\ce{(NH4)3PO4(s) -> 3 NH4+(aq) + PO4^3-(aq)}.

  3. Calculate the moles of ammonium ions released: n(NHX4X+)=3×0.150 mol=0.450 moln(\ce{NH4+}) = 3 \times 0.150\text{ mol} = 0.450\text{ mol}.

  4. Calculate the molar concentration: [NHX4X+]=0.450 mol0.5000 L=0.900 mol/L[\ce{NH4+}] = \frac{0.450\text{ mol}}{0.5000\text{ L}} = 0.900\text{ mol/L}.

Final answer

Chemical formula: (NHX4)X3POX4\ce{(NH4)3PO4}; [NHX4X+]=0.900 M[\ce{NH4+}] = 0.900\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice combining polyatomic ions of unequal charges (such as +1+1 with −2-2 or −3-3) to build automaticity with charge balancing.

  • Always write out the dissociation equation with stoichiometric coefficients before calculating individual ion quantities.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert the volume from milliliters to liters when calculating molarity, resulting in a concentration that is too small by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (NH4)3PO4(\text{NH}_4)_3\text{PO}_4

  2. Step 2

    moles \text{moles } NH\text{NH}4^+ = 3 ×\times 0.150 mol\text{ mol} = 0.450 mol\text{ mol}

  3. Step 3

    [NH\text{NH}4^+] = 0.450 mol500.0 mL\frac{0.450\text{ mol}}{500.0\text{ mL}} = 0.000900 mol/L\text{ mol/L}

    Correct

    [NH\text{NH}4^+] = 0.450 mol0.5000 L\frac{0.450\text{ mol}}{0.5000\text{ L}} = 0.900 mol/L\text{ mol/L}

    Molarity (MM) is defined as moles of solute per liter of solution (mol/L\text{mol/L}). Dividing directly by 500.0 mL500.0\text{ mL} gives mol/mL\text{mol/mL} rather than mol/L\text{mol/L}. You need to convert 500.0 mL500.0\text{ mL} to 0.5000 L0.5000\text{ L} first.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the chemical formula for ammonium phosphate using parentheses for the polyatomic cation.

You accurately identified that each mole of (NH4)3PO4(\text{NH}_4)_3\text{PO}_4 yields three moles of NH4+\text{NH}_4^+ ions and calculated 0.450 mol0.450\text{ mol}.

You correctly set up the ratio of moles to volume to find concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion from mL to L in molarity calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You plugged milliliters directly into the denominator of the molarity formula without converting the volume into liters, while still writing the units of the final answer as mol/L.

REASONING PATH
Your ACEpath teacher’s suggested approach
Volume Unit in Molarity
  • Molarity is defined strictly as M=n (mol)V (L)M = \frac{n\text{ (mol)}}{V\text{ (L)}}.

  • Always convert milliliters to liters (V (L)=V (mL)1000V\text{ (L)} = \frac{V\text{ (mL)}}{1000}) before substituting into the concentration formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the solution volume to liters: V=500.0 mL×1 L1000 mL=0.5000 LV = 500.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.5000\text{ L}.

  2. Calculate the molarity using the converted volume: [NH4+]=0.450 mol0.5000 L=0.900 M[\text{NH}_4^+] = \frac{0.450\text{ mol}}{0.5000\text{ L}} = 0.900\text{ M}.

Final answer

(NH4)3PO4(\text{NH}_4)_3\text{PO}_4; [NH4+]=0.900 M[\text{NH}_4^+] = 0.900\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out units explicitly during intermediate calculation steps to catch mismatched units such as mol/mL\text{mol/mL}.

  • Before calculating molarity, always convert given volumes into liters as an explicit first step.

Lock it in

Similar question

01

A solution is prepared by dissolving 0.200 mol0.200\text{ mol} of iron(III) chloride, FeCl3\text{FeCl}_3, in water to make 250.0 mL250.0\text{ mL} of solution. Calculate the molar concentration of chloride ions ([Cl−][\text{Cl}^-]) assuming complete dissociation.

Answer

[Cl−]=2.40 M[\text{Cl}^-] = 2.40\text{ M}. Dissociation: FeCl3(s)→Fe3+(aq)+3Cl−(aq)\text{FeCl}_3(s) \rightarrow \text{Fe}^{3+}(aq) + 3\text{Cl}^-(aq). Moles of Cl−=3×0.200 mol=0.600 mol\text{Cl}^- = 3 \times 0.200\text{ mol} = 0.600\text{ mol}. Volume =0.2500 L= 0.2500\text{ L}. [Cl−]=0.600 mol0.2500 L=2.40 M[\text{Cl}^-] = \frac{0.600\text{ mol}}{0.2500\text{ L}} = 2.40\text{ M}.

02

Write the chemical formula for aluminum sulfate. If 17.1 g17.1\text{ g} of solid aluminum sulfate (molar mass =342.15 g/mol= 342.15\text{ g/mol}) is dissolved in water to make 500.0 mL500.0\text{ mL} of solution, find the molar concentration of sulfate ions ([SO42−][\text{SO}_4^{2-}]).

Answer

Formula: Al2(SO4)3\text{Al}_2(\text{SO}_4)_3; [SO42−]=0.300 M[\text{SO}_4^{2-}] = 0.300\text{ M}. Moles of Al2(SO4)3=17.1 g342.15 g/mol=0.0500 mol\text{Al}_2(\text{SO}_4)_3 = \frac{17.1\text{ g}}{342.15\text{ g/mol}} = 0.0500\text{ mol}. Moles of SO42−=3×0.0500 mol=0.150 mol\text{SO}_4^{2-} = 3 \times 0.0500\text{ mol} = 0.150\text{ mol}. Volume =0.5000 L= 0.5000\text{ L}. [SO42−]=0.150 mol0.5000 L=0.300 M[\text{SO}_4^{2-}] = \frac{0.150\text{ mol}}{0.5000\text{ L}} = 0.300\text{ M}.

03

A chemist mixes 100.0 mL100.0\text{ mL} of 0.300 M (NH4)2SO40.300\text{ M}\text{ (NH}_4)_2\text{SO}_4 with 200.0 mL200.0\text{ mL} of 0.150 M NH4NO30.150\text{ M}\text{ NH}_4\text{NO}_3. Assuming additive volumes and complete dissociation of both salts, determine the total concentration of ammonium ions ([NH4+][\text{NH}_4^+]) in the final mixed solution.

Answer

[NH4+]=0.300 M[\text{NH}_4^+] = 0.300\text{ M}. Moles of NH4+\text{NH}_4^+ from (NH4)2SO4=2×(0.300 mol/L×0.1000 L)=0.0600 mol(\text{NH}_4)_2\text{SO}_4 = 2 \times (0.300\text{ mol/L} \times 0.1000\text{ L}) = 0.0600\text{ mol}. Moles of NH4+\text{NH}_4^+ from NH4NO3=1×(0.150 mol/L×0.2000 L)=0.0300 mol\text{NH}_4\text{NO}_3 = 1 \times (0.150\text{ mol/L} \times 0.2000\text{ L}) = 0.0300\text{ mol}. Total moles of NH4+=0.0900 mol\text{NH}_4^+ = 0.0900\text{ mol}. Total volume =0.1000 L+0.2000 L=0.3000 L= 0.1000\text{ L} + 0.2000\text{ L} = 0.3000\text{ L}. [NH4+]=0.0900 mol0.3000 L=0.300 M[\text{NH}_4^+] = \frac{0.0900\text{ mol}}{0.3000\text{ L}} = 0.300\text{ M}.

Loading workspace…