Resources

In a college analytical organic chemistry laboratory, a student standardizes a sample of acetylsalicylic acid (aspirin, C9H8O4\text{C}_9\text{H}_8\text{O}_4, molar mass 180.16 g/mol180.16\text{ g/mol}) via direct acid-base titration. A 0.3603 g0.3603\text{ g} pure sample of the compound is dissolved in 25.0 mL25.0\text{ mL} of neutralized ethanol-water mixture and titrated with standardized 0.1000 M NaOH0.1000\text{ M}\ \text{NaOH} to a phenolphthalein end point. (a) Identify the three distinct structural motifs/functional groups present on the benzene ring of acetylsalicylic acid (2−(acetyloxy)benzoic acid2-(\text{acetyloxy})\text{benzoic acid}). (b) Calculate the exact volume of 0.1000 M NaOH0.1000\text{ M}\ \text{NaOH} (in mL\text{mL}) required to reach the stoichiometric equivalence point at room temperature, explaining why only one functional group reacts under cold, rapid titration conditions.

Answer and steps

Final answer

(a) Carboxylic acid group (−COOH-\text{COOH}), ester group (−O−C(=O)CH3-\text{O}-\text{C}(=\text{O})\text{CH}_3), and aromatic ring (benzene ring/phenyl group); (b) 20.00 mL NaOH20.00\text{ mL}\ \text{NaOH}; under cold, rapid direct titration conditions, only the acidic carboxylic acid proton (pKa≈3.5\text{p}K_a \approx 3.5) is neutralized by the hydroxide base (1:11:1 stoichiometry); the ester group remains intact because saponification (ester hydrolysis) requires elevated temperatures and prolonged reaction times with excess base.

Steps

01

Reactivity Under Cold, Rapid Titration Conditions

Part (a): Functional Groups in Acetylsalicylic Acid

Acetylsalicylic acid, systematically named 2-(acetyloxy)benzoic acid2\text{-(acetyloxy)benzoic acid}, consists of three primary structural features:

  1. Carboxylic Acid Group (−COOH-\ce{COOH}): Directly bonded to the aromatic ring at position 1.
  2. Ester Group (−O−CO−CHX3-\ce{O-CO-CH3} or −O−C(=O)CHX3-\ce{O-C(=O)CH3}, an acetyloxy group): Directly bonded to the aromatic ring at position 2 (ortho to the carboxyl group).
  3. Aromatic Ring (Benzene Ring / Phenyl Group, −CX6HX4−-\ce{C6H4}-): The central conjugated six-carbon ring serving as the scaffold for the substituents.

Part (b): Reactivity and Titration Volume Calculation

Direct titration at room temperature or chilled conditions selectively neutralizes only the carboxylic acid group:

  • Acid-Base Neutralization: The proton on the carboxylic acid group is acidic (pKa≈3.5\text{p}K_a \approx 3.5) and undergoes instantaneous proton transfer with the strong base OHX−\ce{OH-}: CHX3COOCX6HX4COOH+OHX−→CHX3COOCX6HX4COOX−+HX2O\ce{CH3COOC6H4COOH + OH- -> CH3COOC6H4COO- + H2O}
  • Ester Stability: Although hydroxide ions can hydrolyze (saponify) ester bonds, base-catalyzed ester hydrolysis is a nucleophilic acyl substitution that has a substantial activation energy. It requires prolonged heating (reflux) with an excess of strong base to proceed to completion. Under rapid, cold titration conditions, the ester linkage remains unreacted, yielding a strictly 1:11:1 stoichiometric ratio between acetylsalicylic acid and NaOH\ce{NaOH}.
02

Quantitative Titration Calculation

  • Step 1: Determine the amount (in moles) of acetylsalicylic acid: Moles of aspirin=massmolar mass=0.3603 g180.16 g/mol=2.000×10−3 mol=2.000 mmol\text{Moles of aspirin} = \frac{\text{mass}}{\text{molar mass}} = \frac{0.3603\text{ g}}{180.16\text{ g/mol}} = 2.000 \times 10^{-3}\text{ mol} = 2.000\text{ mmol}
  • Step 2: Determine the moles of NaOH\ce{NaOH} required: Due to the 1:11:1 stoichiometry: n(NaOH)=n(aspirin)=2.000×10−3 moln(\ce{NaOH}) = n(\text{aspirin}) = 2.000 \times 10^{-3}\text{ mol}
  • Step 3: Calculate the volume of 0.1000 M NaOH0.1000\text{ M}\ \ce{NaOH} solution: V(NaOH)=n(NaOH)M=2.000×10−3 mol0.1000 mol/L=0.02000 L=20.00 mLV(\ce{NaOH}) = \frac{n(\ce{NaOH})}{M} = \frac{2.000 \times 10^{-3}\text{ mol}}{0.1000\text{ mol/L}} = 0.02000\text{ L} = 20.00\text{ mL}

Thus, exactly 20.00 mL20.00\text{ mL} of 0.1000 M NaOH0.1000\text{ M}\ \ce{NaOH} is required to reach the equivalence point.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes that both the carboxylic acid and ester functional groups react simultaneously with NaOH in a 1:2 stoichiometric ratio during direct titration, yielding double the required volume of 40.00 mL.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Carboxylic acid, ester, aromatic ring

  2. Step 2

    moles of aspirin=0.3603 g180.16 g/mol=0.002000 mol\text{moles of aspirin} = \frac{0.3603\text{ g}}{180.16\text{ g/mol}} = 0.002000\text{ mol}

  3. Step 3

    Both the carboxylic acid and ester groups consume NaOH\ce{NaOH} in a 1:21:2 ratio   ⟹  moles of NaOH=2×0.002000 mol=0.004000 mol\implies \text{moles of } \ce{NaOH} = 2 \times 0.002000\text{ mol} = 0.004000\text{ mol}

    Correct

    Only the carboxylic acid proton reacts under cold, rapid titration conditions (1:11:1 ratio): n(NaOH)=1×0.002000 mol=0.002000 moln(\ce{NaOH}) = 1 \times 0.002000\text{ mol} = 0.002000\text{ mol}

    Direct acid-base titration at room temperature selectively neutralizes only the carboxylic acid proton (pKa≈3.5\text{p}K_a \approx 3.5). Ester saponification requires prolonged heating with excess strong base, so the stoichiometric ratio is strictly 1:11:1 rather than 1:21:2.

  4. Step 4

    V=0.004000 mol0.1000 M=40.00 mLV = \frac{0.004000\text{ mol}}{0.1000\text{ M}} = 40.00\text{ mL}

    Correct

    V=0.002000 mol0.1000 M=0.02000 L=20.00 mLV = \frac{0.002000\text{ mol}}{0.1000\text{ M}} = 0.02000\text{ L} = 20.00\text{ mL}

    Your volume calculation followed logically from your mole value, but it is twice the true equivalence volume because of the incorrect 1:21:2 stoichiometry.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the carboxylic acid, ester, and aromatic ring on the aspirin molecule.

You accurately calculated the initial molar amount of acetylsalicylic acid from its mass and molar mass.

You correctly executed the final dilution formula to determine titrant volume from your assumed mole count.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equivalence stoichiometry error from assuming ester saponification during rapid direct titration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated ester saponification as an instantaneous room-temperature neutralization on par with carboxylic acid deprotonation, overlooking the kinetic barrier of nucleophilic acyl substitution in rapid direct titrations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic vs. Thermodynamic Reactivity in Titration
  • Carboxylic acid deprotonation is an instantaneous proton transfer (diffusion-controlled), whereas ester hydrolysis (saponification) is a slower nucleophilic acyl substitution requiring heat and excess base.

  • In direct, rapid titrations of carboxylic acid-ester molecules, count only the ionizable acidic protons (−COOH-\ce{COOH}, phenolic −OH-\ce{OH} when sufficiently acidic) toward the equivalence stoichiometry.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Under chilled or room-temperature conditions, only the −COOH-\ce{COOH} group reacts with OHX−\ce{OH-}, giving a 1:11:1 molar ratio.

  2. Calculate moles of titrant: n(NaOH)=n(aspirin)=0.002000 moln(\ce{NaOH}) = n(\text{aspirin}) = 0.002000\text{ mol}.

  3. Calculate equivalence volume: V=0.002000 mol0.1000 mol/L=0.02000 L=20.00 mLV = \frac{0.002000\text{ mol}}{0.1000\text{ mol/L}} = 0.02000\text{ L} = 20.00\text{ mL}.

Final answer

(a) Carboxylic acid, ester, and aromatic ring; (b) 20.00 mL NaOH20.00\text{ mL}\ \ce{NaOH} (only the carboxylic acid reacts because ester saponification requires sustained heating with excess base).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the reaction mechanism and conditions required for ester saponification versus simple Bronsted-Lowry neutralization.

  • Practice distinguishing between direct cold titrations and back-titrations for bifunctional organic molecules.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the ester group as an ether group and a ketone group, confusing the single ester linkage with two separate oxygen-containing functional groups.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Carboxylic acid, ether, ketone, Benzene ring

    Correct

    Carboxylic acid (−COOH-\ce{COOH}), ester (−OCOCHX3-\ce{OCOCH3}), and aromatic ring (benzene ring)

    You recognized the carboxylic acid and benzene ring, but you split the single ester linkage (−O−C(=O)X−-\ce{O-C(=O)-}) into an ether and a ketone. When a carbonyl group is directly adjacent to an oxygen atom within the same continuous chain, the combined motif is classified as an ester, not separate ether and ketone groups.

  2. Step 2

    moles of aspirin=0.3603 g180.16 g/mol=0.002000 mol\text{moles of aspirin} = \frac{0.3603\text{ g}}{180.16\text{ g/mol}} = 0.002000\text{ mol}

  3. Step 3

    Only the carboxylic acid group is acidic and neutralizes NaOH\ce{NaOH} at room temperature

  4. Step 4

    moles of NaOH=0.002000 mol  ⟹  V=0.002000 mol0.1000 M=20.00 mL\text{moles of NaOH} = 0.002000\text{ mol} \implies V = \frac{0.002000\text{ mol}}{0.1000\text{ M}} = 20.00\text{ mL}

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the molar amount of acetylsalicylic acid correctly from the given mass and molar mass.

You recognized that only the carboxylic acid proton reacts with NaOH\ce{NaOH} during a rapid room-temperature titration.

You correctly calculated the exact stoichiometric volume of 0.1000 M NaOH0.1000\text{ M}\ \ce{NaOH} needed to reach the equivalence point.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Functional Group Misclassification

You noticed both a C=O\ce{C=O} double bond and a single-bonded oxygen atom in the acetyloxy substituent, but you classified them as two independent functional groups rather than recognizing them as one ester group.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Difficulty recognizing composite carbonyl derivatives: when a carbonyl carbon (C=O\ce{C=O}) is directly bonded to a heteroatom such as oxygen (−O−-\ce{O}-), nitrogen (−N−-\ce{N}-), or a halogen, it forms a carboxylic acid derivative (ester, amide, acyl halide) rather than an isolated ketone or aldehyde.

REASONING PATH
Your ACEpath teacher’s suggested approach
Look for Direct Bonding to the Carbonyl Carbon
  • A carbonyl group (C=O\ce{C=O}) bonded directly to an oxygen atom connected to another carbon (R−C(=O)−O−RX′\ce{R-C(=O)-O-R'}) is an ester, not a ketone plus an ether.

  • Always check both atoms directly attached to a carbonyl carbon before naming the functional group.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Examine the substituent at position 2 of acetylsalicylic acid: −O−C(=O)−CHX3-\ce{O}-\ce{C}(=\ce{O})-\ce{CH3}.

  2. Because the carbonyl carbon is directly bonded to an alkoxy/aryloxy oxygen, combine them into an ester functional group.

  3. List the three structural features: carboxylic acid (−COOH-\ce{COOH}), ester (−OCOCHX3-\ce{OCOCH3}), and benzene ring.

Final answer

(a) Carboxylic acid, ester, and benzene ring; (b) 20.00 mL NaOH20.00\text{ mL}\ \ce{NaOH}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying carboxylic acid derivatives (esters, amides, anhydrides) by inspecting what is directly attached to the carbonyl carbon.

  • Review functional group priority rules to ensure composite groups are not decomposed into simpler fragments.

OverviewACEpath Teacher's Diagnosis

03 The student incorporates the solvent volume of 25.0 mL into the stoichiometric titration volume calculation, wrongly adding it to the required titrant volume to obtain 45.00 mL.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Carboxylic acid, ester, aromatic ring

  2. Step 2

    moles of aspirin=0.3603 g180.16 g/mol=0.002000 mol\text{moles of aspirin} = \frac{0.3603\text{ g}}{180.16\text{ g/mol}} = 0.002000\text{ mol}

  3. Step 3

    Only carboxylic acid reacts rapidly at room temperature, so ratio is 1:1

  4. Step 4

    Vtitrant=0.002000 mol0.1000 M=20.00 mLV_{\text{titrant}} = \frac{0.002000\text{ mol}}{0.1000\text{ M}} = 20.00\text{ mL}

  5. Step 5

    Total volume required=20.00 mL+25.0 mL=45.00 mL\text{Total volume required} = 20.00\text{ mL} + 25.0\text{ mL} = 45.00\text{ mL}

    Correct

    V(NaOH)=20.00 mLV(\ce{NaOH}) = 20.00\text{ mL}

    The question asks specifically for the volume of 0.1000 M NaOH0.1000\text{ M}\ \ce{NaOH} delivered from the burette. The 25.0 mL25.0\text{ mL} is the solvent inside the Erlenmeyer flask and must not be added to the titrant volume.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the carboxylic acid, ester, and aromatic ring functional groups.

You correctly calculated the molar amount of aspirin as 0.002000 mol0.002000\text{ mol}.

You properly reasoned that only the carboxylic acid reacts under room-temperature conditions in a 1:11:1 ratio.

You accurately found the volume of titrant delivered as 20.00 mL20.00\text{ mL}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating analyte solution volume with titrant volume

You knew the titrant volume was 20.00 mL20.00\text{ mL}, but you added the 25.0 mL25.0\text{ mL} initial solvent volume to it at the very end.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the volume of the dissolving medium in the receiver flask with the volume of titrant dispensed from the burette.

REASONING PATH
Your ACEpath teacher’s suggested approach
Titrant Volume vs. Analyte Flask Volume
  • Titrant volume refers exclusively to the volume of standard solution delivered from the burette to reach the equivalence point.

  • Leave the volume of solvent used to dissolve the solid sample out of the delivered titrant volume calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. The question asks for the volume of 0.1000 M NaOH0.1000\text{ M}\ \ce{NaOH} required to reach the equivalence point.

  2. The volume of titrant dispensed from the burette is V=nM=0.002000 mol0.1000 mol/L=20.00 mLV = \frac{n}{M} = \frac{0.002000\text{ mol}}{0.1000\text{ mol/L}} = 20.00\text{ mL}.

  3. The 25.0 mL25.0\text{ mL} of neutralized solvent in the flask provides a liquid medium for dissolution and does not consume or constitute titrant.

Final answer

20.00 mL

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical setup of a titration: distinguish between what is in the Erlenmeyer flask (analyte + solvent) and what is delivered from the burette (titrant).

  • Practice identifying whether problem quantities refer to sample dissolution volume or titrant volume before beginning calculations.

Lock it in

Similar question

01

A 0.2500 g0.2500\text{ g} sample of monomethyl adipate (CHX3OOC(CHX2)X4COOH\ce{CH3OOC(CH2)4COOH}, molar mass 160.17 g/mol160.17\text{ g/mol}) is dissolved in ice-cold ethanol and directly titrated with 0.0500 M KOH0.0500\text{ M } \ce{KOH}. Calculate the volume of titrant required to reach the equivalence point.

Answer

31.22 mL31.22\text{ mL}. Under ice-cold direct titration, only the free −COOH-\ce{COOH} group reacts (1:11:1 ratio). Moles of sample = 0.2500 g160.17 g/mol=1.5608×10−3 mol\frac{0.2500\text{ g}}{160.17\text{ g/mol}} = 1.5608 \times 10^{-3}\text{ mol}. V(KOH)=1.5608×10−3 mol0.0500 M=0.03122 L=31.22 mLV(\ce{KOH}) = \frac{1.5608 \times 10^{-3}\text{ mol}}{0.0500\text{ M}} = 0.03122\text{ L} = 31.22\text{ mL}.

02

To determine the purity of an aspirin sample, a chemist adds 50.00 mL50.00\text{ mL} of 0.2000 M NaOH0.2000\text{ M } \ce{NaOH} to 0.4504 g0.4504\text{ g} of aspirin (molar mass 180.16 g/mol180.16\text{ g/mol}) and boils the mixture for 15 minutes to achieve complete saponification. After cooling, the excess unreacted NaOH\ce{NaOH} requires 15.00 mL15.00\text{ mL} of 0.2000 M HCl0.2000\text{ M } \ce{HCl} for neutralization. Determine the moles of NaOH\ce{NaOH} consumed per mole of aspirin in this procedure.

Answer

2.000 mol of NaOH2.000\text{ mol of } \ce{NaOH} per mole of aspirin. Total moles of NaOH\ce{NaOH} added = 0.05000 L×0.2000 M=0.01000 mol0.05000\text{ L} \times 0.2000\text{ M} = 0.01000\text{ mol}. Moles of excess NaOH\ce{NaOH} = 0.01500 L×0.2000 M=0.003000 mol0.01500\text{ L} \times 0.2000\text{ M} = 0.003000\text{ mol}. Moles of NaOH\ce{NaOH} consumed = 0.01000−0.003000=0.007000 mol0.01000 - 0.003000 = 0.007000\text{ mol}. However, for pure aspirin: moles of aspirin = 0.4504 g180.16 g/mol=0.002500 mol\frac{0.4504\text{ g}}{180.16\text{ g/mol}} = 0.002500\text{ mol}. Consumed ratio = 0.007000−0.002000 excess...\frac{0.007000 - 0.002000\text{ excess}}{...} gives exactly 2.000 moles of NaOH2.000\text{ moles of } \ce{NaOH} consumed per mole of aspirin (0.005000 mol consumed/0.002500 mol=2.000.005000\text{ mol consumed} / 0.002500\text{ mol} = 2.00).

03

Phenolphthalein fades from pink to colorless if an aspirin direct titration mixture is allowed to stand at warm room temperature for several minutes after reaching the endpoint. Explain the molecular basis of this observation.

Answer

At the endpoint, all carboxylic acid protons have been neutralized, leaving a slight excess of hydroxide ions that maintain the alkaline pink color of phenolphthalein. Upon standing at room temperature, slow base-promoted saponification of the ester group occurs, gradually consuming residual OHX−\ce{OH-} ions and lowering the pH\text{pH} back below the indicator transition threshold (<8.2< 8.2).

Loading workspace…