Resources

An analytical chemist standardizes a Karl Fischer reagent to determine trace moisture levels. The volumetric titration of water is based on the stoichiometric Bunsen reaction in an anhydrous methanol-imidazole medium: H2O+I2+SO2+3RN+CH3OH→2RN⋅HI+RN⋅HSO4CH3\text{H}_2\text{O} + \text{I}_2 + \text{SO}_2 + 3\text{RN} + \text{CH}_3\text{OH} \rightarrow 2\text{RN}\cdot\text{HI} + \text{RN}\cdot\text{HSO}_4\text{CH}_3, showing a strict 1:11:1 stoichiometric molar ratio between H2O\text{H}_2\text{O} and I2\text{I}_2. The Karl Fischer reagent is standardized against pure sodium tartrate dihydrate (Na2C4H4O6⋅2H2O\text{Na}_2\text{C}_4\text{H}_4\text{O}_6\cdot 2\text{H}_2\text{O}, molar mass 230.08 g/mol230.08\text{ g}/\text{mol}), which contains exactly two moles of coordinated hydrate water held via hydrogen bonding per mole of salt. If a primary standard sample of 0.1250 g0.1250\text{ g} of sodium tartrate dihydrate requires exactly 18.42 mL18.42\text{ mL} of Karl Fischer reagent to reach the bipotentiometric endpoint, calculate the water equivalence titer TT of the Karl Fischer reagent in milligrams of water per milliliter of titrant (mg H2O/mL\text{mg }\text{H}_2\text{O}/\text{mL}). The molar mass of water is 18.015 g/mol18.015\text{ g}/\text{mol}. Express your answer to four significant figures.

Answer and steps

Final answer

1.062 mg H2O/mL1.062\text{ mg }\text{H}_2\text{O}/\text{mL}

Steps

01

Calculate the mass fraction of water in sodium tartrate dihydrate

To find the water equivalence titer TT of the Karl Fischer reagent, determine the exact mass of water contained in the primary standard sample and divide it by the volume of reagent consumed.

Sodium tartrate dihydrate has the formula NaX2CX4HX4OX6 ⋅2 HX2O\ce{Na2C4H4O6 \cdot 2H2O}. Each mole of the compound contains two moles of water of crystallization:

  • Molar mass of NaX2CX4HX4OX6 ⋅2 HX2O=230.08 g/mol\ce{Na2C4H4O6 \cdot 2H2O} = 230.08\text{ g/mol}
  • Molar mass of HX2O=18.015 g/mol\ce{H2O} = 18.015\text{ g/mol}

The mass of water present per mole of the salt is: mwater/mol=2×18.015 g/mol=36.030 g/molm_{\text{water/mol}} = 2 \times 18.015\text{ g/mol} = 36.030\text{ g/mol}

The theoretical mass fraction of water (wHX2Ow_{\ce{H2O}}) is: wHX2O=2×18.015 g/mol230.08 g/mol≈0.15660w_{\ce{H2O}} = \frac{2 \times 18.015\text{ g/mol}}{230.08\text{ g/mol}} \approx 0.15660

02

Calculate the mass of water in the weighed standard sample

Multiply the mass of the primary standard sample by the mass fraction of water: mHX2O=0.1250 g×36.030 g/mol230.08 g/mol=0.019575 gm_{\ce{H2O}} = 0.1250\text{ g} \times \frac{36.030\text{ g/mol}}{230.08\text{ g/mol}} = 0.019575\text{ g}

Convert this mass from grams to milligrams (1 g=1000 mg1\text{ g} = 1000\text{ mg}): mHX2O=0.019575 g×1000 mg/g≈19.57 mgm_{\ce{H2O}} = 0.019575\text{ g} \times 1000\text{ mg/g} \approx 19.57\text{ mg}

03

Calculate the water equivalence titer (TT)

The titer TT represents the milligrams of water titrated per milliliter of reagent: T=mHX2OVtitrantT = \frac{m_{\ce{H2O}}}{V_{\text{titrant}}}

Substitute the values: T=19.57 mg18.42 mL≈1.062 mg HX2O/mLT = \frac{19.57\text{ mg}}{18.42\text{ mL}} \approx 1.062\text{ mg }\ce{H2O}/\text{mL}

(Pitfall to avoid: Do not omit the stoichiometric factor of 2 for water in sodium tartrate dihydrate, as each formula unit releases two coordinated water molecules into the titration vessel).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that sodium tartrate dihydrate contains two moles of water per mole of compound, using only one mole of water in the mass fraction calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m(H2O)=0.1250 g×(18.015 g/mol230.08 g/mol)=0.009787 g=9.787 mgm(\text{H}_2\text{O}) = 0.1250\text{ g} \times \left(\frac{18.015\text{ g/mol}}{230.08\text{ g/mol}}\right) = 0.009787\text{ g} = 9.787\text{ mg}

    Correct

    m(H2O)=0.1250 g×(2×18.015 g/mol230.08 g/mol)=0.019575 g=19.575 mgm(\text{H}_2\text{O}) = 0.1250\text{ g} \times \left(\frac{2 \times 18.015\text{ g/mol}}{230.08\text{ g/mol}}\right) = 0.019575\text{ g} = 19.575\text{ mg}

    Sodium tartrate dihydrate has the formula NaX2CX4HX4OX6 ⋅2 HX2O\ce{Na2C4H4O6 \cdot 2H2O}, which contains 22 moles of water per mole of salt. You included only 11 mole of water in the numerator (18.015 g/mol18.015\text{ g/mol} instead of 2×18.015 g/mol=36.030 g/mol2 \times 18.015\text{ g/mol} = 36.030\text{ g/mol}).

  2. Step 2

    T=9.787 mg18.42 mL=0.5313 mg H2O/mLT = \frac{9.787\text{ mg}}{18.42\text{ mL}} = 0.5313\text{ mg }\text{H}_2\text{O}/\text{mL}

    Correct

    T=19.575 mg18.42 mL=1.063 mg H2O/mLT = \frac{19.575\text{ mg}}{18.42\text{ mL}} = 1.063\text{ mg }\text{H}_2\text{O}/\text{mL}

    Your division and unit conversion were carried out correctly, but the numerical result is exactly half the true value because of the missing factor of 22 from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the Karl Fischer titer is calculated as the ratio of mass of water to the volume of titrant.

You converted grams to milligrams accurately.

You reported your calculated value to four significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Hydrate Stoichiometry Omission

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the hydrate as containing only one equivalent of water rather than multiplying the molar mass of water by the hydration coefficient of 2 indicated by the chemical formula NaX2CX4HX4OX6 ⋅2 HX2O\ce{Na2C4H4O6 \cdot 2H2O}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Hydrate Stoichiometry
  • For any hydrated salt M⋅nHX2OM \cdot n\ce{H2O}, the mass fraction of water is wHX2O=n×M(HX2O)M(M⋅nHX2O)w_{\ce{H2O}} = \frac{n \times M(\ce{H2O})}{M(M \cdot n\ce{H2O})}.

  • Always circle the hydrate coefficient nn in the chemical formula before setting up the mass fraction ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total mass of water in the standard sample using the correct hydration factor: m(HX2O)=0.1250 g×2×18.015 g/mol230.08 g/mol=0.019575 g=19.575 mgm(\ce{H2O}) = 0.1250\text{ g} \times \frac{2 \times 18.015\text{ g/mol}}{230.08\text{ g/mol}} = 0.019575\text{ g} = 19.575\text{ mg}.

  2. Divide by the titrant volume consumed: T=19.575 mg18.42 mL≈1.0627 mg/mLT = \frac{19.575\text{ mg}}{18.42\text{ mL}} \approx 1.0627\text{ mg/mL}.

Final answer

1.063 mg HX2O/mL1.063\text{ mg }\ce{H2O}/\text{mL} (or 1.062 mg HX2O/mL1.062\text{ mg }\ce{H2O}/\text{mL} depending on intermediate rounding)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review hydrated salt formulas and explicitly write out n×M(HX2O)n \times M(\ce{H2O}) whenever calculating water mass fractions.

  • Check that the calculated titer aligns physically with typical Karl Fischer titrant strengths (usually around 11 to 5 mg HX2O/mL5\text{ mg }\ce{H2O}/\text{mL}).

OverviewACEpath Teacher's Diagnosis

02 The student divides the total mass of the standard by the titrant volume directly, confusing the mass of the salt with the mass of water.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m(sample)=0.1250 g=125.0 mgm(\text{sample}) = 0.1250\text{ g} = 125.0\text{ mg}

  2. Step 2

    T=125.0 mg18.42 mL=6.786 mg H2O/mLT = \frac{125.0\text{ mg}}{18.42\text{ mL}} = 6.786\text{ mg }\text{H}_2\text{O}/\text{mL}

    Correct

    mH2O=125.0 mg×2×18.015 g/mol230.08 g/mol=19.575 mg  ⟹  T=19.575 mg18.42 mL=1.062 mg H2O/mLm_{\text{H}_2\text{O}} = 125.0\text{ mg} \times \frac{2 \times 18.015\text{ g/mol}}{230.08\text{ g/mol}} = 19.575\text{ mg} \implies T = \frac{19.575\text{ mg}}{18.42\text{ mL}} = 1.062\text{ mg }\text{H}_2\text{O}/\text{mL}

    You divided the total mass of the salt sample by the titrant volume. Because sodium tartrate dihydrate is a hydrate, you must first multiply by the mass fraction of water (accounting for 2 mol of H2O2\text{ mol of } \text{H}_2\text{O} per mole of salt) before dividing by the volume.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the sample mass from grams to milligrams using the proper unit factor.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Hydrate Mass vs. Water Mass Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the total mass of the crystalline primary standard as if it were pure liquid water, overlooking the stoichiometric mass fraction of water in NaX2CX4HX4OX6 ⋅2 HX2O\ce{Na2C4H4O6 \cdot 2H2O}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Calculate Water Mass Fraction
  • For a hydrate M ⋅nHX2O\ce{M \cdot }n\ce{H2O}, the mass fraction of water is wH2O=n⋅MH2OMhydratew_{\text{H}_2\text{O}} = \frac{n \cdot M_{\text{H}_2\text{O}}}{M_{\text{hydrate}}}.

  • Always multiply the sample mass by the water fraction to find the actual mass of water titrated.

Define Titer Correctly
  • The Karl Fischer titer is defined specifically as T=mH2OVreagentT = \frac{m_{\text{H}_2\text{O}}}{V_{\text{reagent}}}, not msampleVreagent\frac{m_{\text{sample}}}{V_{\text{reagent}}}.

  • Check the units of the numerator carefully: it requires milligrams of HX2O\ce{H2O}, not milligrams of compound.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the mass fraction of water in sodium tartrate dihydrate: w=2×18.015 g/mol230.08 g/mol≈0.15660w = \frac{2 \times 18.015\text{ g/mol}}{230.08\text{ g/mol}} \approx 0.15660.

  2. Calculate the mass of water in the weighed standard: mH2O=125.0 mg×0.15660=19.575 mgm_{\text{H}_2\text{O}} = 125.0\text{ mg} \times 0.15660 = 19.575\text{ mg}.

  3. Compute the water equivalence titer: T=19.575 mg18.42 mL=1.062 mg H2O/mLT = \frac{19.575\text{ mg}}{18.42\text{ mL}} = 1.062\text{ mg }\text{H}_2\text{O}/\text{mL}.

Final answer

1.062 mg H2O/mL1.062\text{ mg }\text{H}_2\text{O}/\text{mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the stoichiometric formula of the hydrate standard and determine nn, the number of water molecules per formula unit.

  • Calculate the mass percentage of water before setting up the titer quotient.

  • Verify your final unit labels to ensure the numerator refers strictly to mg HX2O\text{mg }\ce{H2O}.

OverviewACEpath Teacher's Diagnosis

03 The student uses the anhydrous molar mass of sodium tartrate instead of the dihydrate formula mass in the denominator when calculating the water mass fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    M(anhydrous)=230.08−2×18.015=194.05 g/mol  ⟹  m(H2O)=0.1250 g×(36.030194.05)=0.023209 g=23.209 mgM(\text{anhydrous}) = 230.08 - 2 \times 18.015 = 194.05\text{ g/mol} \implies m(\text{H}_2\text{O}) = 0.1250\text{ g} \times \left(\frac{36.030}{194.05}\right) = 0.023209\text{ g} = 23.209\text{ mg}

    Correct

    m(H2O)=0.1250 g×(2×18.015 g/mol230.08 g/mol)=0.019575 g=19.575 mgm(\text{H}_2\text{O}) = 0.1250\text{ g} \times \left(\frac{2 \times 18.015\text{ g/mol}}{230.08\text{ g/mol}}\right) = 0.019575\text{ g} = 19.575\text{ mg}

    You weighed out the dihydrate form (Na2C4H4O6⋅2H2O\text{Na}_2\text{C}_4\text{H}_4\text{O}_6\cdot 2\text{H}_2\text{O}), not the anhydrous salt. Therefore, the mass fraction of water in your weighed sample must be the mass of water per mole divided by the total molar mass of the dihydrate (230.08 g/mol230.08\text{ g/mol}), not the anhydrous molar mass (194.05 g/mol194.05\text{ g/mol}).

  2. Step 2

    T=23.209 mg18.42 mL=1.260 mg H2O/mLT = \frac{23.209\text{ mg}}{18.42\text{ mL}} = 1.260\text{ mg H}_2\text{O}/\text{mL}

    Correct

    T=19.575 mg18.42 mL=1.062 mg H2O/mLT = \frac{19.575\text{ mg}}{18.42\text{ mL}} = 1.062\text{ mg H}_2\text{O}/\text{mL}

    You set up the titer quotient correctly by dividing the mass of water in milligrams by the titrant volume in milliliters, but your numerical value was affected by the mass error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that each mole of sodium tartrate dihydrate contains two moles of water (2×18.015 g/mol=36.030 g/mol2 \times 18.015\text{ g/mol} = 36.030\text{ g/mol}).

You correctly defined the Karl Fischer titer as the mass of water in milligrams divided by the volume of titrant in milliliters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Hydrate Mass Fraction Formula Error

You subtracted the water mass to find the anhydrous molar mass and placed that in the denominator instead of keeping the full hydrate molar mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a part-to-part ratio (water to anhydrous residue) with a part-to-whole mass fraction (water to total hydrate). Because the weighed analytical sample is the intact hydrate, any mass fraction must have the total hydrate molar mass in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying the Weighed Species
  • wcomponent=mcomponent in 1 mole of compoundMcompound weighedw_{\text{component}} = \frac{m_{\text{component in 1 mole of compound}}}{M_{\text{compound weighed}}}

  • Check the chemical formula on the reagent bottle or balance. If the weighed standard is a hydrate, its total formula mass (including waters of hydration) must be the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the theoretical mass fraction of water in sodium tartrate dihydrate: w=2×18.015 g/mol230.08 g/mol=0.15660w = \frac{2 \times 18.015\text{ g/mol}}{230.08\text{ g/mol}} = 0.15660.

  2. Calculate the mass of water in the weighed standard: m(H2O)=0.1250 g×0.15660=0.019575 g=19.575 mgm(\text{H}_2\text{O}) = 0.1250\text{ g} \times 0.15660 = 0.019575\text{ g} = 19.575\text{ mg}.

  3. Divide by the endpoint titration volume: T=19.575 mg18.42 mL=1.062 mg H2O/mLT = \frac{19.575\text{ mg}}{18.42\text{ mL}} = 1.062\text{ mg H}_2\text{O}/\text{mL}.

Final answer

1.062 mg H2O/mL1.062\text{ mg H}_2\text{O}/\text{mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying the denominator in gravimetric and volumetric standard mass fractions: ask yourself whether the weighed mass represents the whole hydrate or the anhydrous salt.

  • Solve standardization exercises involving other primary hydrates, such as oxalic acid dihydrate, to reinforce using the total hydrate molar mass.

Lock it in

Similar question

01

A chemist standardizes a Karl Fischer reagent using 0.0850 g0.0850\text{ g} of sodium tartrate dihydrate (NaX2CX4HX4OX6 ⋅2 HX2O\ce{Na2C4H4O6 \cdot 2H2O}, molar mass 230.08 g/mol230.08\text{ g/mol}). The titration reaches the bipotentiometric endpoint after adding 12.35 mL12.35\text{ mL} of titrant. Calculate the water equivalence titer TT of the reagent in mg HX2O/mL\text{mg }\ce{H2O}/\text{mL} to four significant figures.

Answer

1.078 mg HX2O/mL1.078\text{ mg }\ce{H2O}/\text{mL}. First find the water mass: m(HX2O)=0.0850 g×2×18.015 g/mol230.08 g/mol=0.01331 g=13.31 mgm(\ce{H2O}) = 0.0850\text{ g} \times \frac{2 \times 18.015\text{ g/mol}}{230.08\text{ g/mol}} = 0.01331\text{ g} = 13.31\text{ mg}. Then divide by volume: T=13.31 mg12.35 mL=1.078 mg/mLT = \frac{13.31\text{ mg}}{12.35\text{ mL}} = 1.078\text{ mg/mL}.

02

Copper(II) sulfate pentahydrate (CuSOX4 ⋅5 HX2O\ce{CuSO4 \cdot 5H2O}, molar mass 249.68 g/mol249.68\text{ g/mol}) is heated to drive off all water of hydration. If a sample of 1.558 g1.558\text{ g} of the pentahydrate is completely dehydrated, calculate the mass of water lost in grams.

Answer

0.5621 g0.5621\text{ g}. Mass fraction of water is 5×18.015 g/mol249.68 g/mol=0.36076\frac{5 \times 18.015\text{ g/mol}}{249.68\text{ g/mol}} = 0.36076. Multiplying by sample mass gives m(HX2O)=1.558 g×0.36076=0.5621 gm(\ce{H2O}) = 1.558\text{ g} \times 0.36076 = 0.5621\text{ g}.

03

A 25.00 mL25.00\text{ mL} aliquot of moist methanol requires 14.20 mL14.20\text{ mL} of Karl Fischer reagent with a titer of 1.062 mg HX2O/mL1.062\text{ mg }\ce{H2O}/\text{mL}. If the blank titration of the anhydrous solvent medium consumed 0.40 mL0.40\text{ mL} of reagent, determine the concentration of water in the methanol sample in parts per million (ppm\text{ppm} or mg/kg\text{mg/kg}). Assume the density of methanol is 0.791 g/mL0.791\text{ g/mL}.

Answer

741.0 ppm741.0\text{ ppm}. Net titrant volume: Vnet=14.20−0.40=13.80 mLV_{\text{net}} = 14.20 - 0.40 = 13.80\text{ mL}. Total water mass: m(HX2O)=13.80 mL×1.062 mg/mL=14.656 mgm(\ce{H2O}) = 13.80\text{ mL} \times 1.062\text{ mg/mL} = 14.656\text{ mg}. Sample mass: msample=25.00 mL×0.791 g/mL=19.775 g=0.019775 kgm_{\text{sample}} = 25.00\text{ mL} \times 0.791\text{ g/mL} = 19.775\text{ g} = 0.019775\text{ kg}. Water concentration: 14.656 mg0.019775 kg≈741.1 ppm\frac{14.656\text{ mg}}{0.019775\text{ kg}} \approx 741.1\text{ ppm}.

Loading workspace…